Ajax integration and CF 8 developer edition
hello all,
i'm trying to bind cfc to a <cfselect> over CF 8
Developer edition, it is giving me "404 Error invoking CFC"[same
case with autosuggest also]
i tried doing the same on prod'n server - it worked fine.
can any one please explain me, the difference between
Developer edition and enterprise edition?
Thank you
Sanjay
Sanjay k wrote:
> hello all,
>
> i'm trying to bind cfc to a <cfselect> over CF 8
Developer edition, it is
> giving me "404 Error invoking CFC"[same case with
autosuggest also]
> i tried doing the same on prod'n server - it worked
fine.
>
> can any one please explain me, the difference between
Developer edition and
> enterprise edition?
>
> Thank you
> Sanjay
>
pertaining to your issue - there is no difference between cf8
editions.
your error is likely due to a wrong path to your cfc, but
without seeing
your code and more details on cfc location on your dev server
it is
impossible to say for sure...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com
Similar Messages
-
Differences between Soalris and Solaris Express /Developer Edition
Hi
Thank you for readingn my post
What is different between Solaris Express (Developer Edition) and solaris OS?
Are they the same and with same capabilities?
Can I install S1 Grid suite in a Express edition?
ThanksSolaris 10 (with several updates) is the current release version of the Solaris operating system.
Since the release in '05, Sun has been developing the "next" version of Solaris. Using the OpenSolaris code as a base, this version is codenamed "Nevada". Periodic builds of this version are available as Solaris Express. So you get more up-to-date drivers, features, and bugs from it. Because it's under development, there are no patches. Instead you'd need to upgrade to the next release (or create your own patch).
I haven't looked specifically at S1 Grid, so it very likely will install. However installations on Solaris Express may not be a supported configuration if you need that.
Darren -
CF 9 to 9.01 Developer Edition
Hi Folks -
I am looking for some help, ideas, or just a confirmation that it can or can't be done.
I'd prefer the help though. ;-)
I am currently running a Win 7 box with Apache 2.2 and CF 9 Developer edition.
I just d/led the CF 9.01 update to get the cleaner S3 functionality.
I install the .jar file into the updates folder (per the instructions and all the other changes),I restart my apache server, and the CF server (several times at this point), and the version still reads 9,0,0,251028 not 9,0,1,x.
Any ideas or help is appreciated.
Thanks,
Doughi Doug,
Sounds like you are trying to install a cumulative hotfix rather than update 1. You are on Windows so I expect you need to download and run EXE
http://download.macromedia.com/pub/coldfusion/updates/901/ColdFusion_update_901_WWEJ_win.e xe , see:
http://www.adobe.com/support/coldfusion/downloads_updates.html#cf9
All the best with that, Carl. -
Programmatically create objects and formulas in Crystal Reports XI Developer edition?
<p>Is it possible to programatically/dynamically create a text, line, formula field object, etc. in Crystal XI Developer edition? I have been programming with the Crystal .Net reports component that came with VS 2005 for the past 6 months and know for a fact you can't programmatically create those objects although you can programmatically control their properties. My intention is to create a dynamic report that can be reused extensively. My current work-around for this was to create a generic report with about 40 formula field objects which draws data from 40 corresponding formula fields that I can programmatically set it's formula thus imitating a report field. I want to update to the developer edition because I heard with this edition we can programmatically create and manipulate these objects but I found no reference or examples anywhere that proves we can do this? Does anyone know for a fact or point me to the right place to look for documentation? TIA</p>
Hi,
How can I programmatically refresh list of values status on CR server XI R2?
Currently, after I modified the data source in the data connection, some of the LOVs in the report prompt window became empty when I tried to generate the report. I have to use Business View Manager to log onto the Crystal reports server XI R2, find and double click the list of values object to bring up the Edit LOV window, and then click on "Refresh Status" button to make the LOV available in the report prompt window.
What SDK should I use to create a simple application (preferable a desktop application) to find all LOV objects on CR server XI R2 and to refresh their status? That is an application similar to the "Refresh Status" function in Business View Manager.
I found Report Engine SDK has the Lov.Refresh function to refresh LOV. On the other hand, Report Engine SDK seems to be for BusinessObjects Enterprise, not for Crystal Reports Server. Can this or other function achieve what I want, i.e. to refresh list of values status on CR server XI R2? If yes, can I use it to develop a self-contained desktop application instead of a web application? I only need to run this application after I modify the data source in the data connection, so I prefer not need to deploy it as a web service.
Thanks for your help.
C.T. -
Lost Developer Edition theme color when I ran sync and restarted, how to get it back?
I started using Firefox Developer Edition and I turned on sync so I can sync with current version of Firefox I have been using until now. The sync worked fine but when I restarted Firefox, the developer edition came up with the look of the non developer edition version of Firefox. I went in the customize setting and turned on "Use Firefox Developer Edition Theme" and it changed everything but the color. Instead of being the default black that it was originally installed with, now uses the default greyish tan color that is the default of the non developer version. How do I get look of the Firefox Developer Edition back to it's default look?
There are also a few choices for lightweight theme (Persona) via the Themes button in the Customize palette window.
-
after mozilla firefox crashed and a restart, the Firefox Developer Edition opend - how to open the normal firefox browser ?
See if this works for you.
Open up Tools > Options -> General and toggle the first preference - '''Allow Firefox Developer Edition and Firefox to run at the same time''' - to get back to your previous Aurora Profile. It will tell you to restart Firefox.
If there's a check-mark in the box for that pref it shows the Aurora Profile, if you remove that check-mark it shows the Developer Edition Profile. -
I think Aurora updated before I turned off my computer. When I booted up again, Firefox Developer Edition appeared in place of Aurora. My bookmarks and addons all disappeared.
https://support.mozilla.org/kb/recover-lost-bookmarks-firefox-developer-edition
-
Can be Cold Fusion Developer Edition used to develop the product and deliver to client?
Can be Cold Fusion Developer Edition used to develop the product and deliver to client?
The two IP limit not withstanding, the EULA for ColdFusion prevents you from legally using Developer Edition in any production environment. Using it for development is fine, though.
-Carl V. -
Not able to install HANA client and Studio developer edition on Windows(64 bit)
Hi,
I have recently downloaded SAP HANA client and Studio developer edition package for Windows 64.
ngdbc_rev68
sap_hana_win64_client_rev80
sap_hana_win64_studio_rev80
Bit,but I am not able to install it on my machine.
It is giving me error:
Cannot install
Cannot install Microsoft C/C++ Runtime
Starting external program C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe
Command line is: "C:\Users\spragya\CSC\SAP HANA\Client and Studio\sap_hana_win64_studio_rev80\studio\msdev2010_vcredist_x64.exe" /q
Program terminated with exit code 1603
Can someone please let me know what is this issue and this can be rectified.
Screen image of the error attached for reference.Hi Pragya,
Did you check : 1) Administrator Access while installing Microsoft C++ Runtime, 2) enough space on your disk, 3) try uninstalling the MS C++ old version 4) Empty Windows Temp folders
Also check if the environment variables are set right on your Windows machine.
Regards
Avinash Raju -
NW04s on Win XP and SQL Developer Edition
Hello all
I'm trying to install NW 7.0 (04s) on Windows XP SP 2 and SQL Developer Version.
I checked the PAM and it is listed only Win Server and SQL Server Enterprise Edition.
I'm having the following error during phase 24 of 43 installation. (Start Instance)
- starting epb/dvebmgs00 ABAP unknown elapsed time 5:30 minutes....
and keeps trying to do this for 10 minutes until:
- ABAP processes of instance epb/dvebmgs00 [abap:unknown] did not start after 10:00 minutes. Giving up.
The error say something like this :
ERROR 2007-06-08 16:48:47
CJS-30149 ABAP processes of instance EPB/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.
ERROR 2007-06-08 16:48:47
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
I also have some warnings that may represent something:
INFO 2007-06-08 16:35:17
Execute step createOsCol of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0.
WARNING[E] 2007-06-08 16:35:18
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPOsCol).
INFO 2007-06-08 16:38:11
Execute step createCCMSService of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0.
WARNING[E] 2007-06-08 16:38:11
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
My start EPB.log file looks like this:
running C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe name=EPB nr=00 SAPDIAHOST=PALN00433168A -wait
SAPSTART finished successfully on PALN00433168A_EPB_00, but at least one process doesn't run correctly:
C:\usr\sap\EPB\SYS\exe\uc\NTI386\sapstart.exe=>sapparam(1c): No Profile used.
Any ideas as where the error should be?
Thanks
ARit is not possible to install NW on WIN XP
-
Difference between Productive edition and Developer edition
Hi,
what is the difference between SAP NW CE 7.1 installed in Developer edition and Productive Edition.
1)If we are planning for a three system landscape like SAP ERP instances with dev-qas and prd which edition
should we be going ahead with ?
2) In productive edition, can't we install sap nw developer studio like we can do in developer edition.
3) In a 3 tier landscape can we have a mix of editions ie DEV with developer edition and PRD in production edition..
Please reply.
Regards,
SandeepHi,
The difference is mainly that the productive edition is compliant to the usual SAP system layout(sapmnt/saploc shares, users, groups, etc.) while in the development edition these are skipped. From the functional perspective they should be identical.
In addition I AFAIK 32 bit windows is generally not supported for production (because of memory management issues) while 64-bit is not supported for development (IDE).
On your questions:
1) I guess development for developers, production for the rest.
2) I don't think the dev studio is supported on 64-bit.
3) No problem here. However if you're about to need system copy (for example to clone productive system data into dev/qa environment) it will not work for development edition. Have this in mind when you plan your landscape.
Hope this helps !
Best regards, dido -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server 2014 Developer Edition
Microsoft is no longer offering version 2012 developer edition. So, is SQL Server 2014 developer edition ok to use with SQL Server 2012? Thanks.
AFAIK you can ask/purchase developer edition in local MS office.. But it is certainly OK to use SQL Server 2012 Dev Edition to manage servers from different versions.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Ann: Jinspired Provides Free JDBInsight 1.2 Developer Edition License
Press Release
===================================================================
Jinspired Provides Free JDBInsight 1.2 Developer Edition License
DUBLIN, IRELAND - 14 April , 2003 - Jinspired (www.jinspired.com), a leader in
J2EE™ transaction analysis, today announced that it is providing a free license
for the Developer Edition of its innovative performance tuning product, JDBInsight
1.2.
J2EE™ developers using JDBInsight 1.2, can now acquire a greater understanding
of the transactional behaviour of their J2EE™ components from day one. With the
early adoption of JDBInsight in the development life cycle, many of the common
performance problems can be prevented. JDBInsight's unique and powerful information
visualizations of SQL and JDBC™ transactions, make it an ideal tool for those
development teams looking to reduce the risks of incurring future performance
and scalability problems with their J2EE™ applications.
"The feedback from the development and performance testing community regarding
JDBInsight's low overhead, transactional behaviour data capture, and user interface
has been phenomenal.", said William Louth, CTO & Product Architect, Jinspired.
“The reason for providing a free Developer Edition license is to encourage the
early adoption of Java application performance and monitoring products. Typically,
Jinspired is called in to resolve performance problems too late in the development
lifecycle, resulting in increased development, hardware and software costs to
the customer that could have been prevented.”
How to get a free developer license?
Visit http://www.jinspired.com/products/jdbinsight/download.html.
Forthcoming Release - JDBInsight 2.0
Jinspired also announced that it will be releasing version 2.0 of JDBInsight at
the JavaOne conference to be held in San Francisco, CA , 10-13 June 2003. The
new release will be on show at their JavaOne stand. Some of the new features in
JDBInsight 2.0 include:-
-Automatic Java component detection and classification engine for EJB, JDO, JSP
and Servlets
-Integrated Java call stack and transactional path analysis
-Advanced performance bottleneck visualizations
-Java VM Profiler Interface (JVMPI) support
-Transaction demarcation identification
-System Testing support
-Snapshot comparison
-Scripting interface
About JDBInsight
JDBInsight is an innovative enterprise development product, aimed at simplifying
the performance tuning and testing of J2EE™ applications, which access data through
the Java Database Connectivity (JDBC™) API. JDBInsight analyses the access of
enterprise data by J2EE™ client-, web-, and bean containers. The analysis can
encompass transaction executions, from multiple J2EE™ containers. JDBInsight captures
timing and execution information for enterprise data accessed by Servlets, JavaServer
Pages, Session- and Entity Beans using JDBC™ or an Entity Bean using a container's
persistence engine. JDBInsight can also profile non-J2EE applications that access
enterprise data through the JDBC™ API.
About Jinspired
Jinspired located in Ireland, delivers JDBInsight, a comprehensive solution for
Application Performance Tuning and Testing that focuses directly on early identification
within the development and testing lifecycle. Jinspired offers sophisticated analytical
tools, that capture transactional behaviour and performance timing information,
across multiple containers in a single console, and presents this information
intuitively to the user "Visualizing the Invisible”.Thanks Silvano.
What is the difference between iBus MessageServer which is a JMS and BEA Weblogic
JMS Server ? Please tell me what I get more by using iBus MessageServer ?
SS
Silvano Maffeis <[email protected]> wrote:
iBus//Mobile 2.1.1 Available as Free Download!
Turn BEA WebLogic Server into a wireless appserver!
With Softwired's iBus//Mobile Wireless Java Middleware, developers
can create mobile and wireless Java applications for PalmOS, Windows
CE,
Symbian, or simply for any J2ME enabled device platform (CLDC, CDC, MIDP).
iBus//Mobile is the industry's first and only JMS (Java Message Service)
solution for mobile devices. iBus//Mobile connects Java (J2ME) applications
on mobile devices straight-through to your Java applications running
on a
J2EE application server, or as "stand-alone" processes.
With iBus//Mobile, you can develop network-aware, mobile Java
applications in record time. Your mobile applications become highly
interactive (push, pull, request/response, broadcast), fully reliable
(Guaranteed delivery, Disconnected operation, Transparent synchronization),
and secure.
We are glad to inform you that a FREE edition of iBus//Mobile is available.
This means you can develop and deploy applications at no fee. (A limitation
on the number of concurrent connections applies).
*** To DOWNLOAD "iBus//Mobile LE", you first need to sign up for the
iBus Developer Zone:
http://www.softwired-inc.com/insidesoftwired/
Then log-in and click on the "Download Products" link. Finally,
download "iBus//Mobile", Edition "LE", and pick the newest version.
*** For the iBus//Mobile LE PRODUCT SPECIFICATION, visit
http://www.softwired-inc.com/products/mobile/mobile.html -
Jinspired Provides Free JDBInsight 1.2 Developer Edition License
http://www.jinspired.com/jdi12deved.html
Press Release
Jinspired Provides Free JDBInsight 1.2 Developer Edition License
DUBLIN, IRELAND - 14 April , 2003 - Jinspired (www.jinspired.com), a leader in J2EE™ transaction analysis, today announced that it is providing a free license for the Developer Edition of its innovative performance tuning product, JDBInsight 1.2.
J2EE developers using JDBInsight 1.2, can now acquire a greater understanding of the transactional behaviour of their J2EE components from day one. With the early adoption of JDBInsight in the development life cycle, many of the common performance problems can be prevented. JDBInsight's unique and powerful information visualizations of SQL and JDBC transactions, make it an ideal tool for those development teams looking to reduce the risks of incurring future performance and scalability problems with their J2EE applications.
"The feedback from the development and performance testing community regarding JDBInsight's low overhead, transactional behaviour data capture, and user interface has been phenomenal.", said William Louth, CTO & Product Architect, Jinspired. “The reason for providing a free Developer Edition license is to encourage the early adoption of Java application performance and monitoring products. Typically, Jinspired is called in to resolve performance problems too late in the development lifecycle, resulting in increased development, hardware and software costs to the customer that could have been prevented.”
How to get a free developer license?
Visit http://www.jinspired.com/products/jdbinsight/download.html.
Forthcoming Release - JDBInsight 2.0
Jinspired also announced that it will be releasing version 2.0 of JDBInsight at the JavaOne conference to be held in San Francisco, CA , 10-13 June 2003. The new release will be on show at their JavaOne stand. Some of the new features in JDBInsight 2.0 include:-
Automatic Java component detection and classification engine for EJB, JDO, JSP and Servlets
Integrated Java call stack and transactional path analysis
Advanced performance bottleneck visualizations
Java VM Profiler Interface (JVMPI) support
Transaction demarcation identification
System Testing support
Snapshot comparison
Scripting interface
About JDBInsight
JDBInsight is an innovative enterprise development product, aimed at simplifying the performance tuning and testing of J2EE™ applications, which access data through the Java Database Connectivity (JDBC) API. JDBInsight analyses the access of enterprise data by J2EE client-, web-, and bean containers. The analysis can encompass transaction executions, from multiple J2EE containers. JDBInsight captures timing and execution information for enterprise data accessed by Servlets, JavaServer Pages, Session- and Entity Beans using JDBC or an Entity Bean using a container's persistence engine. JDBInsight can also profile non-J2EE applications that access enterprise data through the JDBC API.
About Jinspired
Jinspired located in Ireland, delivers JDBInsight, a comprehensive solution for Application Performance Tuning and Testing that focuses directly on early identification within the development and testing lifecycle. Jinspired offers sophisticated analytical tools, that capture transactional behaviour and performance timing information, across multiple containers in a single console, and presents this information intuitively to the user "Visualizing the Invisible”.Nightfall_Blue wrote:
> I have this error.
>
> A License Exception has been thrown.
> You tried to access the developer edition from a
disallowed IP (192.168.2.6).
> The developer edition can only be accessed from
127.0.0.1 and two additional IP
> addresses. The additional IP addresses are:
65.160.238.180,217.205.105.130
>
>
> How do you set which IP addresses a developer edition of
CF7 can respond to
> http requests from
>
The two non-localhost IP address for the developer edition
are set to
the IP addresses of the first two systems that connect to it
after a
ColdFusion service startup.
If you restart the ColdFusion service the current IP
addresses will be
cleared and the next two to connect will then be allowed.
Maybe you are looking for
-
How to set the location of a button (in an applet)
Hello How do i set the location of the button forexample if i want to create a button in the middle of the applet, how would i do that Thanks :)
-
I have Windows 7 Professional and I used to be able to move the curser over the Firefox Icon in the taskbar and it would show me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?
-
A method call question.
I am trying to check if leg1 is a positive integer, but I method call checkleg, and perform my if statement, but it will not return a 'valid = true' to my public static main. It is always false. please help! * TriangleTest.java * Created on October 3
-
i have a problem that the index is not firing for a particular column in my table when i check using plan table. I am checking using explain plan table. For another column, it is firing. What can i do to rectify it as this is very critical for me. I
-
What's the point of redo logs?
Why does Oracle bother writing everything to redo logs? If it's going to write data changes to the disk, why not just write them once to the data files and be done with it? What's the point of doing it twice? And if it's a redundancy thing, why not m