Ajout d'image à la bibliothèque DSC
Bonjour à tous,
Je souhaite faire un projet pour la supervision d'une ligne de fabrication qui contient plusieurs testeurs. J'aimerais utiliser les images de ses testeurs pour la réalisation du projet. Peut-je donc ajouter ces images à la bibliothèque DSC du labview?
Merci d'avance.
Résolu !
Accéder à la solution.
Bonjour,
Cette KB répondra probablement à votre question :
Using Custom Graphics with Image Navigator in the LabVIEW DSC Module
Cordialement,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions
Similar Messages
-
Bonjour je possede adobe digital edition version4.0 sur pc (windows 8.1) lorsque j'essaie d'ajouter un fichier a la bibliothèque adobe affiche ce message d'erreur
E_ADEPT_DUPLICATE_TRANSACTION_IDThis might be due to server misconfiguration on the seller's side ( they were re-using the same "Transaction ID" ). Can you please try contacting the seller to get a new link?
-
En français SVP. J'ai fais une sauvegarde de ma bibliothèque sur un disque dur externe, mais j'ignore comment faire des mise à jour de ma sauvegarde quand on y ajoute de nouveaux disques. merci à l,avance
Go to
http://support.apple.com/downloads/
Find and download the 9.1 updater. Run it. Then Run Software update again.
Regards
TD -
Comment ajouter fichier à bibliothèque itunes sans créer des masses de doublons?
comment ajouter fichiers audio à bibliothèque itunes sans créer masse énorme de doublons?
il s'agit de fichiers audio d'un macbookpro à transférer à un macbookair via disque dur externe.
les doublons sont apparemment générés par itunes lui-même, au moment ou je demande " itunes / fichier / ajouter à la bibliothèque " et que je sélectionne le fichierThierry, Go to Edit > Preferences > Advanced, and uncheck the box for "Copy files..."
Then when you add new files to the library, iTunes will use the same copy of the file, without creating a duplicate. -
Problème avec les bibliothèque VISION
Bonjour,
Je vous écris car j'ai un problème pour charger mes biliothèques de vision sur la carte SBRIO 9631, quand je compile n'importe qu'elle VI sur la cible, j'ai un message qui affiche: nivision.out , imaqcfgs.out , niimaqdx.out ne sont pas charger ( image ci-joint) . Pourtant j'ai les modules Vision et RT support d'installés sur l'ordinateur.
Je suis actuellement sous une version 2013 de Labview.
Comment puis-je résoudre ce problème?
Bien Cordialement.
Pièces jointes :
erreur (1).PNG 14 KB
erreur (2).PNG 12 KBBonjour,
il faut également installer les composants Vision sur ta sbRIO. Dans MAX, sur ta cible, tu développes l'arborescence de la sbRIO dans les péréphériques déportés, puis tu fais un clic droit sur software et pour installer des logiciels.
Dans la fenêtre qui s'ouvre, tu choisis custom installation software, et la tu sélectionne les bibliothèques Vision qui vont s'ajouter à l'installation courante.
Une fois installée et redémarrée, ca devrait pouvoir fonctionner.
.mesLeft{float:left} .mesInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898} .mesLogo{float:right;opacity:0.18} .mesLogo:hover{opacity:0.9}
Maxime R.
CLD - Certified LabVIEW Developer / Développeur LabVIEW Certifié
CLAD - Certified LabVIEW Associate Developer -
Je n'arrives pas à ouvrir iTunes, lorsque que j'essaye un message d'erreur s'affiche : "nouvelle bibliothèque iTunes".
Pouvez-vous m'aider ?I do not manage to open iTunes when I try an error message appears: "new iTunes library."
Can you help me?
Translated by Google
Sometimes this error is a symptom of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library as iTunes Library (Corrupt) and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
Parfois, cette erreur est un symptôme d'une bibliothèque corrompue.
Bibliothèque vide / corrompu après mise à niveau / crash
Espérons que cela n'a pas été trop long depuis le dernier iTunes à niveau, en fait, si vous obtenez une bibliothèque vide / incomplète immédiatement après la mise à niveau alors avec les étapes suivantes, vous ne devriez pas perdre une chose ou besoin de faire tout autre ménage. Notez que dans iTunes 11 une bibliothèque "vide" peut montrer vos achats passés avec des liens pour écouter ou télécharger.
Dans le dossier des bibliothèques iTunes précédente devrait être un certain nombre d'iTunes datés fichiers de la bibliothèque. Prenez le plus récent d'entre eux et le copier dans le dossier iTunes. Renommez bibliothèque iTunes comme iTunes Library (corrompu) et puis renommez le fichier restauré iTunes Library.itl. Démarrez iTunes. Devraient tous être bon, le bar tous les ajouts récents ou retrait de votre bibliothèque.
Alternativement, selon exactement quand et pourquoi la bibliothèque a disparu, il peut y avoir un fichier plus récent. Tmp dans le dossier principal d'iTunes qui peuvent être rebaptisé iTunes Library.itl pour rétablir la bibliothèque à un état récent.
Voir iTunes Watch Folder d'un outil pour rattraper les changements depuis le fichier de sauvegarde a été créé.
Lorsque vous obtenez tout travail de faire une sauvegarde!
Si vous êtes dans la position inconfortable où vous n'êtes plus en mesure d'accéder à votre bibliothèque d'origine, ou une sauvegarde de celui-ci, puis voyez Récupérez votre bibliothèque iTunes à partir de votre iPod ou votre appareil iOS.
Traduit par Google
Bon chance!
tt2 -
Bibliothèque iphoto sur mac et CS5
Ceux qui veulent utiliser les photos de la bibliothèque iphoto avec les logiciels adobe, il faut afficher le contenue du paquet iphoto et faire un alias du dossier master et transférer l'alias hors d'iphoto en le mettant ans le dossier image par exemple, puis renommer si vous le voulez ce dossier alias, perso je l'i nommé iphoto et maintenant je peux utiliser toutes mes photos avec photoshop, bridge...
16000 références sur 3 documents, voilà tout à fait le type de document qui permettrait de tester les évolutions de la version CC d'inDesign.
Si votre machine vous le permet, n'hésitez pas à tester la version d'essai de 30 jours d'inDesign CC. Je sais que ça ressemble à un message "commercial", mais ce n'est pas l'idée, à moins que vous ne puissiez mettre à disposition vos documents pour test (si rien n'est confidentiel…)
Parfois, il suffit qu'un des documents à indexer présente une erreur pour figer le process… -
Bonsoir,
J'ai mon iPod qui déconne, il ne reconnaît pas les musiques de ma bibliothèque il m'affiche aucun contenu dans Musique alors que sur iTunes j'en ai 2127 qui sont dans l'iPod quand je le connecte au pc et qu'il se synchronise.
Quand je le branche sur le iTunes de mon copain ça fonctionne il arrive à mettre des musiques et à me mettre les musiques dans l'iPod
Que dois je faire j'aimerais de l'aide je vous en suplis je galère depuis plus de 1 semaines :'(No, you cannot control Hyperterminal from
LabVIEW or any other program. You can however, use the VISA functions
in LabVIEW instead. You configure the port (baud rate, parity, etc)
with the VISA Configure Serial Port and you would send commands with
the VISA Write. The VISA Write would perform the same function as you
typing something into Hyperterminal. According to your image, the
device driver for the modem does make it appear as a serial port so you
should not need to install anything else. Open MAX (Measurement &
Automation Explorer) and see if the modem is listed. No, you cannot control Hyperterminal from
LabVIEW or any other program. You can however, use the VISA functions
in LabVIEW instead. You configure the port (baud rate, parity, etc)
with the VISA Configure Serial Port and you would send commands with
the VISA Write. The VISA Write would perform the same function as you
typing something into Hyperterminal. According to your image, the
device driver for the modem does make it appear as a serial port so you
should not need to install anything else. Open MAX (Measurement &
Automation Explorer) and see if the modem is listed.
Hello,
the mobile telephone is not detected in max as you can see on the link picture. I don't think the telephone appears as a standard serial port in hyperterminal : you have to provide a phone number in this case and not when using COM1 (see the link pictures). I think it is more complicated to establish communication with a USB connection than with a serial RS232 cable.
My goal is not to load hyperterminal with labview. Using hyperterminal is just a simple way to establish communication with a serial device (send some AT commands and check the serial device answer), then using VISA functions with Labview.
But it doesn't run in my case.
JF
Attachments:
device_manager_nokia6680.jpg 147 KB
max_serial¶llel.jpg 84 KB
nokia_properties_hyperterminal.jpg 30 KB -
Bonsoir,
Cette semaine, j'ai perdu tout les documents, images et musiques que j'avais sur mon ordinateur. J'ai réinstallé windows et j'ai tout de suite installé iTunes. J'aimerais savoir si il est possible de transférer les musiques de mon iPod vers la bibliothèque de mon ordinateur.
Merci d'avance !While you are free to do what you want - it is strongly recommended that you do not use a referenced library (Do Not uncheck the preference to "copy imported items to the iPhoto lbrary") If creates problems, saves no space and sets up for futrue nighemares
You final conclusion is the correct one - FOR YOU - if you want destructive editing rather than the lossless editing that iPhoto provides then simply do not use iPhoto
LN -
Mettre a jour mon ipod et reprendre mon ancienne bibliothèquee
Bonjour j'ai changé de pc cette semaine et comme je ne me souviens plus de user name et de mon mots de passe je ne pouvait pas synchroniser mon ipod nano 5 . J'ai tous perdu ma musique.
Je voudrais récupérer ma bibliothèque et mettre a jour mon compteEst-ce les données du graphiques que tu veux sauvegarder ou bien l'image du graphique ? Quand tu parles de "lien" sur la face avant, est-ce que tu parles d'un bouton qui t'ouvrirait une fenêtre de sauvegarde? Je ne vois pas ce que labview 7 a de plus que 6.1 pour faire cela. Envoi-nous un exemple .
-
Bonjour
Pouvez-vous me dire comment je peux prendre la musique qui est sur mon ipad et le transférer dans ma bibliothèque de mon mac ?Google translate:
I bought a book on iBook and I can not read, it says that my version iBook is not good but it is up to date ..... the book in question is the fire of passion Nora Roberts and this is the first time I have a problem of its kind yet I have several purchases under my belt
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933http://support.apple.com/kb/HT1933
https://reportaproblem.apple.com/https://reportaproblem.apple.com/
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7http://tinyurl.com/7tscpa7
Cheers, Tom -
Here is messaqge : "I can't access iPhoto because of this message (sorry, it is in French) : "Votre bibliothèque est utilisée par une autre application ou est devenue illisible"".
I am on a iMac 27"with OS X Lion.
The problem appeared while I was doing an import from an USB hard disk and an electric shutdown happened... The iMac and everything started well after but ipohoto.OK, when you find the solution please post it, it may help others in the future. BTW there are some other simple resets you can do, first is restart in Safe Mode, this will clear some caches. It's possibe one has become corrupt. Next would be to do SMC and PRAM resets, the instructions for both are:
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Impossible d'ouvrir ma bibliothèque Aperture
Bonjour,
Après mise à jour d'Aperture 3.4 il m'est impossible d'ouvrir ma bibliothèque,même chose après avoir supprimé le fichier plist des préférences, avez-vous une solution?
MerciSalut,
Si, la réponse est simple : Adobe Reader for Android.
==> https://play.google.com/store/apps/details?id=com.adobe.reader
(Le lecteur fourni par défaut n'est pas terrible) -
Changer le propriétaire de la bibliothèque
Bonjour à tous,
Je viens d'acheter un Imac d'occasion. Lorsque je veux synchroniser mon ipad, itunes me propose systématiquement la bibliothèque de l'ancien propriétaire de l'ordi. J'ai déjà effacé sur .../ma musique/itunes ses fichiers à lui que j'ai remplacé par les miens, j'ai autorisé l'ordinateur, transféré mes achats. Malgré tout ça, à chaque fois que je veux synchroniser, il me propose par défaut la biblio de l'ancien propriétaire.
J'ai bien pensé supprimer itunes pour le réinstaller mais l'imac me le refuse au motif que l'OS en a besoin pour tourner.
Est-ce que quelqu'un saurait comment faire pour "changer" le propriétaire par défaut sur itunes pour que je puisse faire ma synchro sans problème.
Merci de votre aidevfrouard wrote:
> l'objectif est de pouvoir changer le pointeur de la souris ,
> lorsqu'une application crée sous labview travaille?
In LabVIEW 7.x you have VIs under Application Control->Cursor to do
that. Before LabVIEW 7 you had to rely on external DLLs to do that which
typically didn't work well as LabVIEW interfered with it and reset the
cursor constantly.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Bonjour, j'ai téléchargé la nouvelle version d'itunes et depuis il m'affiche erreur -42110 mais ça n'empeche pas le fonctionnement. Mon problème c'est que dans ma bibliothèque j'ai plein de musique mais pas celles que j'avais avant. Je voudrais savoir comment on fait pour remettre les musiques que j'ai sur mon iphone dans la bibliothèque. Car j'ai peur qu'en faisant syncroniser ça me mette es musique que j'ai sur la bibliothèque sur mon iphone..
Je sais pas trop si vous comprenez mon problème, mais j'éspère que vous pourrez y répondre. MERCIBonjour Laurent,
premièrement vous pouvez utiliser: http://helpx.adobe.com/fr/x-productkb/global/find-serial-number.html et éventuellement là
http://helpx.adobe.com/fr/x-productkb/global/find-serial-number.html#a dobeproductdownload
Aussi possible également de contacter Adobe à la page suivante:
http://helpx.adobe.com/fr/support.html > Aide de photoshop > Choisissez un sujet ... > ... (J'avais choisi Utilisation ...) > Je encore besoin d'aide ... > Chat
Veuillez utiliser le chat (si un agent est disponible), j'ai eu les meilleures expériences.
Peut-être que vous avez obtenu un "numéro de série" d'Amazon (ou similaire). Ce n'est pas un numéro de série, seul un code avec lequel vous pouvez demander un numéro de série à partir d'Adobe. Ici, vous devez passer par "Adobe Store", et recherchez le bouton "Serial Demande de numéro". Remplissez le formulaire et, après un certain temps, vous obtiendrez un numéro de série "réel".
Il pourrait être nécessaire d'activer/désactiver s'il vous plaît jeter un oeil là:
http://helpx.adobe.com/fr/x-productkb/policy-pricing/activation-deactivation-products.html
Hans-Günter
P.S.
Vous pouvez également utiliser le Forum Francophone: Forums en français
Maybe you are looking for
-
I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this
-
I have been using this for months with no problem. A PDF scanned document looks fine but when it prints, it is either 1) reversed black background with white text; or 2) zoomed in at 500%. How do i solve this problem? Matt
-
Ah crap. Frozen phone demands I restore it
iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes ^^That's the message I recieved. Phone is now frozen. Cannot afford to lose all the data (mainly on 1 app) on my phone by restoring it to
-
Metadata load during 24 hours and still has not finished
Hi all, I have a problem with the metadata load on HFM 9.3.1.3 It seems it is running from about 24 hours. it happened some time that the log has not been produced from the HFM client, but I always have found in the log that the metadata load had fin
-
Running DocuMaker 12.1 Using IDS 2.4
Hi I have a transaction level DAL to trigger and order the forms based on few nodes in the XML. I see that the DAL works perfectly well when DocuMaker is run stand-alone. It gives the same results when the same extract is submitted multiple times. Bu