Al inicar mi mac pro se abre el office

Al inicar mi mac pro se abre automaticamente todo el office, quiero saber que puedo hacer para que esto no suceda.

Ainda tienes lo problema?

Similar Messages

I have had a new mac pro. and i installed office mac 2011. however, whenever i try to start word, excel or powerpoint, it always appears 'what's new in Word: Mac 2011. what should i do?

i am using the Microsoft Word:Mac 2011. however, whenever i open the folder, it appeared "what's new in Microsoft Word: Mac 2011 and stay there forever. i can not do anything else. what should I do to create a new document or open an old ones?
thank you

Do you not have a Continue button at the lower right of that screen? Click it and the box will flip over. Click Cancel and shut down Word. Launch it again to get the same screen of document choices. You now have an check box at the bottom for "Don't show this when opening Word". Check the box if you prefer not to see this project manager, then click Cancel. The document manager will go away and you'll be presented with a blank document. This is way it will now always start.

What operating system we can use documentations like Microsoft MS office or can is used MS office in Mac pro notebook

What operating system we can use documentations like Microsoft MS office or can is used MS office in Mac pro notebook?

MS Office '11 for Mac: Mac:http://www.microsoft.com/mac/products or http://www.apple.com/iwork/pages/, or http://www.libreoffice.org/, or http://www.neooffice.org/neojava/en/index.php, among many others

How can i share microsoft office 2011 with my mac pro users

I recently purchased a mac pro and downloaded microsoft office but want to know how to share with other users on my mac.

It sounds like you installOffice in the Library folder in your account which limits the use of Office to your account.
If you would have installed it in the Library at root then everyone on the Mac can use it.
Not be a user of Office, I think you will have to uninstall it and then reinstall it correctly in the Library folder at root.
Allan

Mac Pro (2008) Mouse opertational but won't click or open any applications. Help Please!

Mac Pro (Early 2008) my mouse lets me navigate all over and I can see the arrow and everything but can't click or open any applications. What shall I do? Help PLease!

I have a very similar problem on a Mac Pro 2010.
There are 3 Mac Pro's in the office and my apple mouse works perfectly on the other 2 machines, but not mine. On the flip side, he other Apple mice (from the other two Mac Pro's) work perfectly on my machine....?????!?!?
I've tried the guest account on my Mac and mouse works perfect. But when I log back into my account, the click functionality is gone. I can click on the toolbar (open applications) but I can't click anywhere else (Although I have noticed that I can click tabs in Safari, but it just closes them, it doesn't switch to the tab).
The only major difference, is my Mac is running Yosemite, and the others are Mavericks and Snow Leopard.
Any ideas????

Will late 2013 Mac Pro boot from MacBook Pro (8,1)?

I have a MacBook Pro which (until the delivery of my new 16 gb RAM Mac Pro) has been my main machine. When it comes I'd like to put my MBkP into Thunderbolt Target Disk Mode and use my Mac Pro as the CPU (et al) for my work. (In this way I'll have the portability of my MBkP when needed and the speed of the Mac Pro when in the office without having to change / keep track of files, etc.) I have an Dell monitor which I'll connect to via Thunderbolt to DVI as I do now from the MBkP. My MBkP has all the latest updates (eg: Sys 10.9.1 and all other updates).
My question: will this work? Or does the Mac Pro have some minimum system / hardware requirements which won't allow't to boot from the MBkP?
I await your helps with gratitude....
MBkP Model Info:
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
Processor Speed:          2.8 GHz
With Thanks,
Bill Geraci (jer-AW-see)
Office Technology Coordinator
Divinity School
University of Chicago
<Personal Information Edited By Host>

Think that is odd, until there is a new unified OS build for everyone, with new hardware like these there will be new builds every couple of weeks usually. 10.9.0 was long before they were ready for more than testing.
The Mac Pro 2010 went through that, even the 1,1 2006 had about three different builds before a new update for OS X existed.
OEM builds really are just that and not suitable the way retail is. I don't know how they manage pushing updates out now that it is through the App Store other than those are suitable for multiple Macs. ie, IF I have a new nMP sitting here and I 'goof' and need to reinstall the OS and I was negligant in making a backup with T.M. or a clone, and I have to do a net-install (no Mac Pro up till now had the feature) what build gets pushed to download for me? I would hope of course it is the build I had or later but until 9.2 is out...
Which is long winded way of saying, before you make changes, before you do like someone else did couple days ago and migrate from an older MacBook Pro - and carried over out of date and incompatible versions, and even drivers no one wants to see - make sure you have a double backup safety net.

Yosemite update to Mac pro keyboard and mouse not working anymore

Updated to Yosemite on my Mac pro, worked perfect for about 2 weeks then my keyboard and mouse stopped responding, both keyboard and mouse were replaced and still won't work. The computer turns on but won't respond to the USB mouse &Keyboard. Help

I have seen 2 out of the 6 mac pro's in my office do this. I am about to go to the apple store to show them.
When the computer is doing this I have tried using every wired apple keyboard in my office and none of them work. If I try the same keyboards on a windows computer or my macbook they work fine. If I use any non apple usb keyboard they work fine. My problem is if I turn the computer off for a few hours the usb apple keyboard works again so when the computer has been off all night and I pack it up to take it to applecare it is working by the time I get into the store.
I think there is a small flaw in usb port on the mac pro or the apple keyboard that when heated up from use stops the pins from contacting completely. It might be a manufacturing defect and it might be an unintended problem caused by how apple slightly modifies their USB ports.

Graphics card Mac Pro (Early 2008) What is supported

I desperatly need a new Graphics Card for my Early 2008 Mac Pro.
Bellow are the listed and supported graphics cards from apple site.
None of the cards listed for early 2008 is possible (Very hard) to get here in Norway.
I've read some treads here saying that ATI Radeon HD 5870 will work on Early 2008 Mac Pro.
- Can someone please verify that this will work?
- On the Note for early 2009 The radeon HD 5870 card requires Mac OS X v10.6.4 or later and it requires the use of both auxiliary power connections?
Both auxiliary power connections. Do Early 2008 Mac Pro have this possibility?
Graphics cards for Mac Pro (Early 2008)
ATI Radeon HD 2600 XT
NVIDIA GeForce 8800 GT (part number 630-9191 or 630-9897)
NVIDIA Quadro FX 5600
ATI Radeon HD 4870, offered as an upgrade kit
Note: The Radeon HD 4870 card requires Mac OS X v10.5.7 or later for use with the Mac Pro (Early 2008).
Graphics cards for Mac Pro (Early 2009)
NVIDIA GeForce GT 120
ATI Radeon HD 4870
ATI Radeon HD 5870, offered as an upgrade kit
Note: The radeon HD 5870 card requires Mac OS X v10.6.4 or later and it requires the use of both auxiliary power connections.

Robban1978,
I have 27 Apple Mac Pro's (between work/office, home, and clients), and have four Apple Mac Pro's (just at home) and I have purchased the Diamond Radeon HD 7970 graphics cards (7970PE53GHZ) for each of the 27 computers and the graphics cards do work great in all of my Apple Mac Pro computers (2008, 2010, and two 2012 Apple Mac Pro).
The only problem is that I have to boot directly into Windows Vista, Windows 7 or Windows 8 to use the graphics cards because Diamond/Radeon/AMD have not released graphics drivers for the Radeon 7970 for OS X 10.8.x Mountain Lion (as of yet?)
See here: https://discussions.apple.com/message/20289120
See here: https://discussions.apple.com/message/20289931
See here: https://discussions.apple.com/thread/4391012
Hopefully AMD/Radeon/Diamond will release updated graphics drivers for OS X 10.8.x Mountain Lion, and I believe the Diamond Radeon HD 7970 GHz Edition graphics card is probably the best graphics card out on the market (based on it's price/performance), the only problem/issue is there are no OS X 10.8.x Mountain Lion drivers for the Radeon HD 7970 series graphics cards yet.
Hopefully AMD/Radeon/Diamond will work on developing and releasing OS X 10.8.x Mountain Lion drivers.

Cannot send email from 3 accounts Mac Pro

My brand new Mac Pro cannot send email using Gmail, Shaw, or iCloud. At times I can send a simple test message, other times I cannot send. It seems the more data in the email, it for sure cannot be sent. The sent messages get stuck in the Out Box. Full green lights, no red lights in the connection diagnostics window. Any help in this regard will be much appreciated.

thank you for your reply, I did this with the same problem. Turns out that I went to FAQ section and went to the "Sharing" section of "system preferences" and changed my computer name by removing all spaces and apostrophe where it lists my computer name under Mac Book Pro, and problem solved.

Using a serial Wacom tablet on a Mac Pro

I have a good Wacom tablet with serial port interface that I would like to connect to a Mac Pro.
Is there some way to do this? Is there any sort of serial to usb adapter or would that not work with a Mac Pro?
Thanks for any advice.

I don't think so. See these knowledge base articles from Wacom:
http://www.wacom.com/faqs/knowledge_search.cfm?id=67
http://www.wacom.com/faqs/knowledge_search.cfm?id=185

Mixing Memory Mac Pro 2.66 Xenon

Hello all!
Alright I am trying to figure the best configuration that I can afford for a memory upgrade to my Mac Pro. I am looking to spend somewhere south of $200.
I currently have the following memory configuration (3GB):
DIMM Riser A/DIMM 1: 1 GB
DIMM Riser A/DIMM 2: 1 GB
DIMM Riser B/DIMM 1: 512 MB
DIMM Riser B/DIMM 2: 512 MB
I wanted to expand it quite a bit more and see on NewEgg that they are charging appx 65.00 for (2 x 1GB) and 80.00 for (2 x 2GB). It's definitely a better price per GB to get the 2 x 2GB but would I see a large performance increase?
I have been reading on the message boards that it is best not to mix memory but it is suggested to fill all the slots with the same size memory.
I guess it just kills me to take out all of my existing memory to put in just the 4GB of new memory.
Could anyone provide any suggestions?
Thank you for your time in advance!

You have 3GB, which is on the lite side.
The ideal for that model is 4 DIMMs.
Without knowing if you are a light photoshop, or what you use it for, Apple calls 4 x 1GB for FCP (and audio apps) "symmetrical memory."
And I would look at 4 x 2GB and pull your 3GB, maybe sell it once you know the new memory is fine after a month.
Are you seeing page outs? multiple swap files?
Go to folder: /var/
Maybe you are better off with faster drives, new boot drive or for scratch. A WD 10K 150GB VelociRaptor for $180 even.

Is my mac pro's nVidia 8800gt dead. B&W lines across my screen only

Hi, I run a Mac Pro 2008 oct core system. The specs are as follows:
dual 2.8GHz quad core processors
Snow Leopard with all software updates
16GB RAM DDR2 (Pre-DDR3 mac) (apple certified RAM, so won't break my warranty)
Hard drives are set in two raid arrays, there are four 1.5 TB drives, each set to pairs of raid 0 for 3 TB drives. One raid array is set to time machine the other is my startup disc.
dual DVD RW drives
N-Videa 8800GT graphics card (Shipped with my mac)
using a DVI to HDMI adapter to connect to a 40" Samsung LCD TV as a monitor (has always worked flawlessly)
I have upgraded a lot of the parts myself and have a fair amount of knowledge of how to do my own upgrades. My system today crashed on me after waking from sleep mode and attempting to use the web. Now when I try rebooting it gives me a screen that is even lines of black and white, nothing else. I do get the Apple beep noise like normal so my assumption is it isn't going to be the memory. I have cleaned off, reseated, and tried different slots with my graphics card, and both DVI ports, same effect. I am pretty sure this is the graphics card demanding to be replaced, which I have considdered upgrading anyway in the past. Most of my computer activities involve watching HD quality movies and TV shows and playing games with high graphic requirements at maximum settings, so using a top of the line graphics card is to be expected.
What I am posting here for is just getting a confirmation that other people agree with me that this is the problem so I do not waste my money on a new graphics card. Please let me know opinions, I would like to have my computer running swimmingly in the near future. Thanks in advance, I appreciate any help I can get.
-Jacob

Most people often seem to think that after a system freeze they don't need to repair their boot drive.
Over the years, Disk Warrior stands out as indispensable.
ie, don't rely on the restart alone to repair and fix, and you probably don't want to trust and rely on just Apple First Aid.
Boot from another drive and run Apple First Aid followed by Disk Warrior; keep backups of your system you can boot from. Clone your system with SuperDuper. Clear out system caches.
You don't need to buy Apple RAM and its prices to have certified RAM, Crucial and others are fine. Sometimes even better.
I like a fsst, small, boot drive and keep it just to OS/Apps; everything else, media files, data, whatever, on other drives. Multiple backups and redundancy. TimeMachine doesn't benefit or perform any faster with RAID, I've tried just to see.
I would slice off some space for an emergency boot drive so you can OPTION boot to that and run First Aid and other maintenance.
Then worry about hardware, and maybe run some hardware tests.
And for a good "is it software or hardware" do a clearn install of Apple OS and updates (only) - needs less than 30GB.

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

How to allow multiple users login to a MAC PRO without interruption?

I have a mac pro, which runs Yosemite, (2013 module) to be used as a server. However, I have difficult to let multiple users to use the mac simultaneously.
Objective:
    One person uses the mac directly on his desktop, while the others to login remotely though VNC from PC (win 7/Linux).
    The users have their own workspace, and they will not interrupt each other.
What I tried:
    I created two mange accounts on the MAC.
    Account 1 was used to directly login on the mac desktop.
    Account 2 was used to login to the mac from a PC though VNC. (I also tried this from a Centos workstation with the Tiger VNC viewer)
Problem:
When account 2 is login, the location monitor will automatically change to that account as well. Both accounts shared exactly the same screen, mouse & keyboard actions. It is impossible to let multiple users to use the MAC pro simultaneously without interruptions.
If I use "hdiutil attach" to mount a dmg file though SSH with account 2, the folder will automatically show in the local desktop login with account 1.
Question:
I read something about the "Per-user screen sharing". It says, "You can remotely log into a Mac with any user account on that computer and control it, without interrupting someone else who might be using the computer under a different login." Is it possible to do this from a PC or Linux client?
If the problem is simply due to the poor functionality of the build-in VNC service in Yosemite, I appreciate your help to suggest some other decent VNC server for Yosemite. I know the Vine Server (OSXvnc), but I failed to install it on the mac because it is incompatible with the Yosemite.
Does the SSH is supposed to work in this way in OSX? I mean the local account can see the folder mounted by another account though SSH.
If any specific version of Yosemite is required to allow multiple users to access a mac simultaneously? Just as the win 7 professional allow only one user to login in at each time. But with the remote desktop server of windows, multiple users are able to use the same computer at the same time without any problem.
If you familiar with any of the above questions, please help. Any comments and suggestions are appreciated.
I know the best way to get the solution is to direct call the apple support. However, it is really not easy to call them. Because it always results with long waiting time and then the people pick up the phone will transfer my call to an expert who will make me to describe the problem again.
Since I'm not interested in the technique details of all the problems, it is also grateful if you would provide a direct instruction to let me setup the computer for the purpose.
Thanks you very much for your kindly help.

I cannot help with the screen sharing, although I have just tried it with a RealVNC client on an iPad and it seemed to work OK.
However on the disk showing on all users desk tops have you unchecked the "ignore ownership on this volume" check box? You can check the drives permissions with CMD i command.

Multiple displays with 15"and 19"monitor using a VGA splitter on my Mac Pro

Hi, so I have a brand spanking new Mac Pro and have been using a cheap, basic 15" monitor with it. As I'm doing lots of Edit/graphics work I've just purchased a new monitor, it's a 19" Acer flatscreen. Now I'm hoping to work the same display across both monitors, so I can set up my preview window on the 15" and do my work on the 19" screen.
The Mac has two DVI output sockets in the back, both monitors are VGA but I only have one DVI to VGA adaptor. Though I do have a VGA splitter! So I've tried going from one DVI socket to VGA, then put the splitter into that and then each monitor into each split socket, if that makes sense? I now have the same display on each screen i.e. while I'm typing this I'm looking at it twice but I want to see it once over two screens, how do I adjust this, there's no option in display settings?
Is it simply that I need to buy another DVI to VGA adaptor and use the other port? Just looking to save myself a tenner, that's all!
Thanks!
Alex

Yep, you're right! Thanks, working now, very useful.

Al inicar mi mac pro se abre el office

Similar Messages

Maybe you are looking for