AL32UTF, WE8ISO8859P1 and JDBC

Hi all,
I have this quite strange thing: I imported an Oracle8i (8.1.7.3, WE8ISO8895P1) export into a Oracle10i (10.0.2.0, AL32UTF8) database. Before making the import I set my NLS_LANG to AMERICAN_AMRICA.WE8ISO8859P1. No warnings, no errors during import so I figured that everything would be fine. However some character's (Ã©, Ã« and others) are being misformed if we query the database with both JDBC (thin driver) and SQL*Plus (GUI-version). With sqlplus.exe (from a DOS-box) there is no problem if I set NLS_LANG to AMERICAN_AMERICA.WE8ISO8859P1.
So, how to fix this?? Do I have to create another database? Import again with different NLS settings? Put some NLS-setting with the JDBC driver?

Here are the general rules:
In Oracle9i and above the Export utility always exports user data, including Unicode data, in the character
sets of the database. The Import utility automatically converts the data to the character sets of
the target database.
In Oracle8i the Export utility exports user data converting them from the
database character set to the character set of the NLS_LANG of the Export session. The Import
utility first converts the data to the character set of the NLS_LANG of the Import session and then
converts them to the character set of the target database.
There are a few things you will need to figure out. What was the NLS_LANG set to for the Export session. For Import if you used the 10g version the NLS_LANG would be irrelevant. Is the original data in your 8i database clean. You should run the scanner from ISOP1 to UTF8 to check. For more details please read the following paper:
http://www.oracle.com/technology/tech/globalization/pdf/TWP_Character_Set_Migration_Best_Practices_10gR2.pdf

Similar Messages

Help on RFC to JDBC and JDBC to RFC

Help on RFC to JDBC and JDBC to RFC
Hi Gurus
I have the scenario where an RFC will be triggered in SAP , to write to a DB2 database and insert new records in a table
and vice versa the JDBC has to read som data from a table based on a primary key, mark them as read for not be read next time and send the data to an RFC where a table in SAP will be updated.
I have never worked with JDBC before , pls advice.
is there any new issue to consider in PI 7.0 regarding JDBC
Thanks.

The requirement looks standard,
SEARCH IN SDN FOR JDBC scenarios,you will find many docs for sender as well as Receiver.
>
> is there any new issue to consider in PI 7.0 regarding JDBC
>
no issue with PI7.0.
Regards,
Raj

Creating a service ; What needs to be added to tnsnames.ora and JDBC url?

DB version: 11.2.0.2
OS platform : Solaris 10
We have a 2 node RAC.
DB name   = mbsprd
Instance1 = mbsprd1
Instance2 = mbsprd2I want Instance 1 (mbsprd1) to be used for our OLTP application and Instance 2 (mbsprd2) to be used for another application of DSS nature.
Based on the syntax
srvctl add service -d <dbname> -s <ServiceName> -r <Preferred Instance> -a <Available Instance>I am going to create 2 services
-- Creating a service called OLTP
srvctl add service -d mbsprd -s OLTP -r mbsprd1 -a mbsprd2-- Creating a service called DSS
srvctl add service -d mbsprd -s DSS -r mbsprd2 -a mbsprd1-- Starting the services
srvctl start service -d mbsprd -s OLTP
srvctl start service -d mbsprd -s DSSI guess the above steps are enough to configure a service at the server side.
I would like to know what needs to be done at the client side.
Currently the tnsnames.ora file and JDBC url used by our clients are shown below. What needs to be added to tnsnames.ora file and jdbc URL to start using services configured above?
-- SCAN based TNS entry
mbsprd =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (COMMUNITY = tcp.world)
        (PROTOCOL = TCP)(Host = p148149-scan.tpam.net) (Port = 36964))
    (CONNECT_DATA =
      (SERVER       = DEDICATED)
      (SERVICE_NAME = mbsprd)
      (FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC))
-- TNS entry based on local listener
-- Instance 1
mbsprd1 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp148-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd1)
-- Instance 2
-- TNS entry based on local listener
mbsprd2 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp149-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd2)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:mbsprd -- Alternative version used by some clients because the above had 'some issues'
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=p148149-scan.tpam.net) (PORT=36964))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=mbsprd)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 10))))

OLTP =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = OLTP)
DSS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DSS)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:service_name
jdbc:oracle:thin:@new_tns_entry_description(if you would like to connect the database with particular service)
try this and let us know any issues,

IDoc to JDBC and JDBC to IDoc Scenario

Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RP

Hi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

How to avoid hardcoding in RFC Lookup and JDBC Lookup during transport...

Hi All,
We have RFC and JDBC Lookups in some of our scenarios(JDBC to RFC synch)....Now problem is during transport of design objects, we have to change the business system and channel name manually in UDF in target environment....as it wont change although we define the target group in SLD.....we want to avoid this hardcoding.....one idea is we can use a business service inspite of business system and assign the comm channel to it.....this business service will be generic for all environment(dev,qua and prod)...and hence we dnt hav to hardcode....pls let me knw how to achieve or its possible or not....
waiting for ur inputs....
Regds,
Pinangshuk.

Hi,
For RFC lookup you might be doing hardcoding for Business system and RFC channel name.
Options are
1) Create value mapping for Business system. So you can maintain it in Directory part.
2) Keep the RFC channel name same for all system (Development, Quality, Production)
The details of channel can be changed in the Directory part of the respective system

Any difference in the dbms and jdbc drivers btw oracle 8i lite and 9i lite

Is there any significant difference between oracle 8i lite and oracle 9i lite in terms of database and jdbc drivers?
If not, it may be better off using oracle8i.

According to Oracle , 9i lite is more powerful than 8i Lite.
one thing, 8i Lite is not certified for windows 2000.
jothi

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

Need information about Mail and JDBC Adapter

Hi Guys,
I am just started learning XI. Can any you provide any document how to use Mail and JDBC adapters in step-by-step way.
Thanks & Regards
Surendra M

hi,
Check these links
Mail Adapter
http://help.sap.com/saphelp_nw70/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
JDBC Adapter
http://help.sap.com/saphelp_nw70/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Receiving Mail attachments using additional files of file adapter
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
FILE to JDBC Adapter using SAP XI 3.0
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Tips and Tutorial for Sender JDBC Adapter
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
Sachin
Message was edited by:

File to Idoc and Jdbc

Hi Guys,
Can I implement a scenario wherein the data is sent to Idoc and JDBC parallelly without using BPM?
Regards,
Ashish

Ashish,
><i>If i add multiple recievers in receiver determination step without any condition, then how do i add multiple interface determinations in the area below?</i>
Once you add multiple Receivers and save the same, the Receivers will be available in the Window Below and you would need to create an Interface Determination for each of these Receivers.
As you do not have any condition, no need to add conditions.
><i>created seperate Receiver determinations</i>
You would need only ONE RECEIVER DETERMINATION and this receiver determination would in turn have multiple Interface Determinations.
Like mentioned, add multiple receivers save the Receiver Determination and in the window below, you will nopw be able to add an Interface determination for each of the receiver.
Regards,
Bhavesh

JMS and JDBC Adapter in PI7.1

Hi All,
Kindly tell me about the blogs for JMS and JDBC adapter.
Please tell me about the Message Types in JMS adapter.
Thanks in advance.

Hi Shwetambari,
Thanks for the reply.
We need to mention the Adapter Modules while configuring the communiucation channels in JMS
e.g. Adapter/ConvertJMSMessageToBinary,Adapter/ConvertBinaryToXMBMessage etc.
So please tell me whether we need to write the cide for the same in JAVA or it is already there ?If it is there then whre can we get it?Do we need to decompile the archeve ?If so, then how to do it?
Can you give me the Adaqpter Modules for which the code is already there?
The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK.
What are the different types of Messaging Systems?Or what is meant by the Messaging System in JMS?
What are the different types of Messages used?
Thanks in advance.
Edited by: Shweta Kullkarni on Sep 4, 2009 5:22 AM

How to upload an html file using jsp and jdbc

Hi,
im trying to upload an html page using JSP and jdbc. but of no success.
my aim is to keep some important html pages in the database.the file size can vary.the file has to be selected from a local machine (through the browser) and uploaded to a remote machine(where the databse resides).
any help/sample code or pointer to any helpful link is appreciated.
thanks in advance
javajar2003

When uploading a file, I use a byte array as a temporary buffer..
So, you should then be able to store the byte array in the
database as binary data.
example>
//Temporary Buffer To Store File
byte[] tmpbuffer = new byte[860];
//Some Code To Upload File...
//File Should Now Be In Byte Array
//Get DB Connection and execute Prepared Statement
Connection con=//GET DB CONNECTION;
String sql=insert into TABLE(page) values(?);
PreparedStatement ps=con.prepareStatement(sql);
ps.setBytes(1,tempbuffer);
ps.executeUpdate();
//Close PS and Free DB Connection
..... and this method looks like you dont even have
to store the file in a byte array, you can just give
it the input stream.
ps.setBinaryStream(int, inputStream, int);
You may have to make several attempts at this. I have
uploaded a file and temporarily stored it in a byte array,
but have never from there stored it in the DB as binary
data.. but this looks like it'll work.
Good Luck!

TableView - support for datasource (on-demand loading and JDBC)

Hi,
I'm new to JavaFX and I was wondering if anybody knows any good practices for TableView with large datasets. Any API extension that supports datasources for on-demand loading and JDBC. Or any good tutorial, example or ideas. I was looking at DataFX but I don't see any datasource for JDBC in the javadocs even when it's mention their website.
Thanks in advance, any help or ideas are appreciated.

Hello,
here is some pseudocode for your requirement.
max pagesize is 100 per query request
i=0
While(!Lastpage)
request.startrownum=i;
response=LeadQuery(request);
Lastpage=response.lastpage;
i+=100
}

JSF and JDBC

Hi, I am new to JSF, can anybody direct me to a good tutorial on JSF and JDBC (Oracle)?
Thanks

Try
http://java.sun.com/developer/onlineTraining/index.html
From here you will find links for JDBC (via Distributed computing) & the Web Services Tutorial (JSF is included)
If you specifically want Oracle then you can sign up to OTN - try
http://www.oracle.com/technologies/

Sqlj and jdbc for linux

Hi All,
I am currently set up the (tomcat) jsp engine on top of apache web server.
And now i would like to install both sqlj and a jdbc driver such
that I can query our oracle database. In all of the options for downloads
there is a windoze option and a solaris option. Do I have to wait for specific
"linux" version to get them to work. Or is the solaris option alright
for linux ??
slightly confused,
Chris

Unfortunately, this description is still rather unspecific.
It sounds, as if there might be an issue with the way database connections are established for the SQLJ and JDBC parts of your program. Could you provide more information on that, specifically on how you obtain JDBC connections and SQLJ connection contexts.

Oracle express and jdbc

can i use oracle 10g express edition and jdbc connector to connect to it through java. i read on the comparison list that 10g express doesn't support java..what does it mean??

Thanks for your help.
I went through the features list comparing different versions of oracle ..express, standard etc from the following page :
http://www.oracle.com/database/product_editions.html
In the 'Application Development' section under, corresponding to 'Java Support' there is no tick mark....i guess i misunderstood the fine print which says :
"Grid-enable databases through Web Services"....
thanks anyway...

AL32UTF, WE8ISO8859P1 and JDBC

Similar Messages

Maybe you are looking for