ALAC to ACC Conversion During a Sync

In the past I imported most of the iTunes music on my Mac is in ALAC format.  The ACC formats are pretty good now so I don't mind using 256 ACC.
Will iTunes convert my ALAC music on my Mac to 256 ACC on my iPhone.  If so, how do I configure it to do that?

We are getting closer, but still not quite agreeing.
You said, "you don't need to restore. If you removed the 128 MP3 in iTunes, just sync. It will remove the MP3 version and put the new version on."
Assume there is no 128 MP3 song in iTunes on the Mac to delete.  The 128 MP3 version on the iPhone came from downconverting during a previous download.
"Or simply make the change, stop the sync and restart the sync.
Or let it complete the sync then resync it."
Your second statement is not consistent with your first, which was, "I assume an iTunes sync would not replace the 128 MP3 iPhone versions with 256 ACC ones."
Are you suggesting I go through the files on the iPhone, one by one, and delete all that have compression quality less than 256 ACC?  That would be tedious.  I just plugged in my iPhone, selected Music, and then tried to sort the Kind column by clicking on "Kind".  It did not sort them by "Kind".  It starts listing ACC, then lists MPEG, then lists ACC again.  As far as I can tell I can only sort on Genres, Artists, and Albums.  Even if I could sort on Kind, it would not sort on Bitrate, so I could not group the 256 ACC files.
So I state again, there is no non-tedious method to upgrade the 128 MP3 files on the iPhone, except for deleting and syncing the all of the music on the iPhone.

Similar Messages

  • How do I solve this Nano 3G syncing problem?  During the syncing process my music files are registering as audio, but once I eject the IPOD it does not reveal the music files in the music folder.

    During the syncing process my IPOD Nano 3G shows that the music files that I'm synching are registering as audio, and that the video files are registering as video, and even upon completion they are still labeled as such.  But, when I eject the device from ITUNES and turn it on, the IPOD reveals that there are no music or video files to be played.  When I plug the device back into my MAC and, when ITUNES recognizes the device, uder the summary tab the summary bar reads that the files that I loaded are all classified as other files.  What could be causing this?  I had to re-install my Tiger Software, and since then I've been having this problem.

    was this ever addressed

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • ITunes crashing during manual sync/update requiring use of "Apply" button.

    My iTunes will sync new music just fine via the "Recently Added" smart playlist (to my 16GB iPod Nano Touch), but anything else I do that requires me to lock in changes by hitting the "Apply" button immediately locks up iTunes. If I try to manually select a playlist to add and hit "Apply", it crashes.
    Date/Time:       2012-03-21 08:30:59 -0500
    OS Version:      10.7.3 (Build 11D50b)
    Architecture:    x86_64
    Report Version:  9
    Command:         iTunes
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Version:         10.6 (10.6)
    Build Version:   1
    Project Name:    iTunes
    Source Version:  10604001
    Parent:          launchd [129]
    PID:             62048
    Event:           hang
    Duration:        3.04s
    Steps:           32 (100ms sampling interval)
    Pageins:         5
    Pageouts:        0
    Process:         iTunes [62048] (zombie)
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Architecture:    x86_64
    UID:             501
      Thread 0x16976d     DispatchQueue 1
      User stack:
        31 ??? (in iTunes) [0x105a5ccc8]
          31 ??? (in iTunes) [0x105a5ce88]
            31 -[NSApplication run] + 555 (in AppKit) [0x7fff90ffd1f2]
              31 ??? (in iTunes) [0x105f5c51b]
                31 -[NSApplication sendEvent:] + 5593 (in AppKit) [0x7fff9106716d]
                  31 ??? (in iTunes) [0x105b826f8]
                    31 -[NSWindow sendEvent:] + 6504 (in AppKit) [0x7fff910ce7a6]
                      31 forwardMethod + 129 (in AppKit) [0x7fff910d4302]
                        31 -[NSObject performSelector:withObject:] + 61 (in CoreFoundation) [0x7fff88d8275d]
                          31 forwardMethod + 129 (in AppKit) [0x7fff910d4302]
                            31 -[NSObject performSelector:withObject:] + 61 (in CoreFoundation) [0x7fff88d8275d]
                              31 ??? (in iTunes) [0x105b863b6]
                                31 ??? (in iTunes) [0x105b8644a]
                                  31 ??? (in iTunes) [0x105b865d9]
                                    31 ??? (in iTunes) [0x105b8665c]
                                      31 ??? (in iTunes) [0x105f69a80]
                                        31 ??? (in iTunes) [0x105f72a52]
                                          31 ??? (in iTunes) [0x105d60697]
                                            31 ??? (in iTunes) [0x105d572b3]
                                              31 ??? (in iTunes) [0x105ddc36c]
                                                31 ??? (in iTunes) [0x105dc10d0]
                                                  31 ??? (in iTunes) [0x105dc5ebd]
                                                    31 ??? (in iTunes) [0x105dc5690]
                                                      31 ??? (in iTunes) [0x105dc4cd6]
                                                        31 ??? (in iTunes) [0x105dbb095]
                                                          31 ??? (in iTunes) [0x105a884e8]
                                                            31 ??? (in iTunes) [0x105a88551]
                                                              31 ??? (in iTunes) [0x105dcd542]
                                                                30 ??? (in iTunes) [0x105dc1255]
                                                                  19 ??? (in iTunes) [0x105a84d91]
                                                                    9 ??? (in iTunes) [0x105a84f99]
                                                                      6 pthread_mutex_unlock + 268 (in libsystem_c.dylib) [0x7fff90ce46ab]
                                                                        3 OSAtomicCompareAndSwap64Barrier$VARIANT$mp + 8 (in libsystem_c.dylib) [0x7fff90d2b54c]
                                                                        1 __mtx_droplock + 41 (in libsystem_c.dylib) [0x7fff90ce42eb]
                                                                        1 __mtx_droplock + 692 (in libsystem_c.dylib) [0x7fff90ce4576]
                                                                        1 __mtx_droplock + 263 (in libsystem_c.dylib) [0x7fff90ce43c9]
                                                                      1 ??? (in iTunes) [0x105a5d994]
                                                                      1 pthread_mutex_unlock + 6 (in libsystem_c.dylib) [0x7fff90ce45a5]
                                                                      1 pthread_mutex_unlock + 432 (in libsystem_c.dylib) [0x7fff90ce474f]
                                                                    4 ??? (in iTunes) [0x105a84fd4]
                                                                      3 OSAtomicCompareAndSwap64Barrier$VARIANT$mp + 8 (in libsystem_c.dylib) [0x7fff90d2b54c]
                                                                      1 pthread_mutex_lock + 66 (in libsystem_c.dylib) [0x7fff90ce3fc2]
                                                                    2 ??? (in iTunes) [0x105a84f8d]
                                                                      1 ??? (in iTunes) [0x105a85416]
                                                                      1 ??? (in iTunes) [0x105a85423]
                                                                    1 ??? (in iTunes) [0x105a84dcb]
                                                                      1 ??? (in iTunes) [0x105a5d3fc]
                                                                        1 mach_absolute_time + 47 (in libsystem_c.dylib) [0x7fff90cd5328]
                                                                    1 ??? (in iTunes) [0x105a84ddb]
                                                                    1 ??? (in iTunes) [0x105a84df5]
                                                                    1 ??? (in iTunes) [0x105a5d99b]
                                                                  6 ??? (in iTunes) [0x105a84d2a]
                                                                    3 OSAtomicCompareAndSwap64Barrier$VARIANT$mp + 8 (in libsystem_c.dylib) [0x7fff90d2b54c]
                                                                    1 pthread_mutex_lock + 291 (in libsystem_c.dylib) [0x7fff90ce40a3]
                                                                    1 pthread_mutex_lock + 591 (in libsystem_c.dylib) [0x7fff90ce41cf]
                                                                    1 pthread_mutex_lock + 313 (in libsystem_c.dylib) [0x7fff90ce40b9]
                                                                      1 pthread_threadid_np + 57 (in libsystem_c.dylib) [0x7fff90ce65bd]
                                                                  3 pthread_mutex_unlock + 268 (in libsystem_c.dylib) [0x7fff90ce46ab]
                                                                    1 __mtx_droplock + 473 (in libsystem_c.dylib) [0x7fff90ce449b]
                                                                    1 __mtx_droplock + 710 (in libsystem_c.dylib) [0x7fff90ce4588]
                                                                    1 OSAtomicCompareAndSwap64Barrier$VARIANT$mp + 8 (in libsystem_c.dylib) [0x7fff90d2b54c]
                                                                  1 ??? (in iTunes) [0x105a84d25]
                                                                  1 ??? (in iTunes) [0x105a84d81]
                                                                1 ??? (in iTunes) [0x105dc125e]
      Kernel stack:
        31 hndl_allintrs + 290 (in mach_kernel) [0xffffff80002d7bd2]
          31 interrupt + 192 (in mach_kernel) [0xffffff80002c2790]
            31 lapic_interrupt + 121 (in mach_kernel) [0xffffff80002c7859]
              31 cpu_signal_handler + 172 (in mach_kernel) [0xffffff80002c970c]
                31 sync_iss_to_iks + 118 (in mach_kernel) [0xffffff80002c1bc6]
        1 return_from_trap + 156 (in mach_kernel) [0xffffff80002d79ec]
          1 i386_astintr + 42 (in mach_kernel) [0xffffff80002c1c8a]
            1 ast_taken + 211 (in mach_kernel) [0xffffff800021e0c3]
              1 bsd_ast + 837 (in mach_kernel) [0xffffff800054ff65]
                1 postsig + 632 (in mach_kernel) [0xffffff800054e528]
                  1 exit1 + 425 (in mach_kernel) [0xffffff8000541579]
                    1 task_terminate_internal + 264 (in mach_kernel) [0xffffff80002377d8]
                      1 thread_terminate_internal + 220 (in mach_kernel) [0xffffff800023cacc]
                        1 thread_wait + 166 (in mach_kernel) [0xffffff80002300b6]
                          1 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                            1 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                              1 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
      Thread 0x169780   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a62d17]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        31 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x169792   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a735a1]
                31 ??? (in iTunes) [0x105a62ec4]
                  31 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff8be22bca]
      Kernel stack:
        31 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002d8363]
          31 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005caa7b]
            31 psynch_cvwait + 1913 (in mach_kernel) [0xffffff800059f149]
              31 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
                31 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                  31 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                    31 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697b3   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a7b8c4]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        31 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697c8   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x106411a05]
                31 ??? (in iTunes) [0x1064119e0]
                  31 ??? (in iTunes) [0x105a62e00]
                    31 ??? (in iTunes) [0x105a62ec4]
                      31 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff8be22bca]
      Kernel stack:
        31 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002d8363]
          31 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005caa7b]
            31 psynch_cvwait + 1913 (in mach_kernel) [0xffffff800059f149]
              31 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
                31 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                  31 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                    31 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697c9   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x105b4bceb]
              31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        31 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697ca   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x10625cb8c]
                31 ??? (in iTunes) [0x10625c9e9]
                  31 __accept + 10 (in libsystem_kernel.dylib) [0x7fff8be2247a]
      Kernel stack:
        31 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002d8363]
          31 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005caa7b]
            31 accept_nocancel + 469 (in mach_kernel) [0xffffff80005876f5]
              31 msleep + 119 (in mach_kernel) [0xffffff8000552a27]
                31 wakeup + 267 (in mach_kernel) [0xffffff80005523cb]
                  31 lck_mtx_sleep + 74 (in mach_kernel) [0xffffff8000227e6a]
                    31 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                      31 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                        31 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697cb   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x10625cb8c]
                31 ??? (in iTunes) [0x10625c9e9]
                  31 __accept + 10 (in libsystem_kernel.dylib) [0x7fff8be2247a]
      Kernel stack:
        31 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002d8363]
          31 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005caa7b]
            31 accept_nocancel + 469 (in mach_kernel) [0xffffff80005876f5]
              31 msleep + 119 (in mach_kernel) [0xffffff8000552a27]
                31 wakeup + 267 (in mach_kernel) [0xffffff80005523cb]
                  31 lck_mtx_sleep + 74 (in mach_kernel) [0xffffff8000227e6a]
                    31 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                      31 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                        31 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697cc   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 __select + 10 (in libsystem_kernel.dylib) [0x7fff8be22df2]
      Kernel stack:
        31 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Thread 0x1697cd   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a62d17]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x1697d1   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a62d17]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x169809   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a62d17]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x16981a   
      User stack:
        31 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          31 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            31 ??? (in iTunes) [0x1062eb85a]
              31 ??? (in iTunes) [0x105a62d17]
                31 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff88d3738f]
                  31 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x169a23   
      User stack:
        31 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff90ce8b85]
          31 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff8be23192]
      Kernel stack:
        32 workqueue_exit + 1616 (in mach_kernel) [0xffffff80005a1660]
      Thread 0x16977a     DispatchQueue 2
      User stack:
        31 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          31 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        31 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x16977a   
      Kernel stack:
        1 thread_funnel_set + 256 (in mach_kernel) [0xffffff800023a3f0]
      Binary Images:
             0x105a59000 -        0x106bf8fe7  com.apple.iTunes 10.6 (10.6) <A7AC514C-E3C4-B6E4-522A-D3FE410790C6> /Applications/iTunes.app/Contents/MacOS/iTunes
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff90c97000 -     0x7fff90d74fef  libsystem_c.dylib ??? (???) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
          0x7fff90ff8000 -     0x7fff91bfcfff  com.apple.AppKit 6.7.3 (1138.32) <A9EB81C6-C519-3F29-89F1-42C3E8930281> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Process:         Activity Monitor [152]
    Path:            /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
    Architecture:    x86_64
    UID:             501
      Thread 0x4f7        DispatchQueue 1
      User stack:
        32 ??? (in Activity Monitor) [0x1044c977c]
          32 NSApplicationMain + 867 (in AppKit) [0x7fff9127bb88]
            32 -[NSApplication run] + 470 (in AppKit) [0x7fff90ffd19d]
              32 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff91000861]
                32 _DPSNextEvent + 659 (in AppKit) [0x7fff91000f5d]
                  32 BlockUntilNextEventMatchingListInMode + 62 (in HIToolbox) [0x7fff8b8d8456]
                    32 ReceiveNextEventCommon + 355 (in HIToolbox) [0x7fff8b8d85c9]
                      32 RunCurrentEventLoopInMode + 277 (in HIToolbox) [0x7fff8b8d131f]
                        32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                          31 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                            31 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                              31 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
                          1 __CFRunLoopRun + 1895 (in CoreFoundation) [0x7fff88d28117]
                            1 __CFRunLoopDoSource1 + 155 (in CoreFoundation) [0x7fff88cf19db]
                              1 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 44 (in CoreFoundation) [0x7fff88cf1cac]
                                1 __CFMachPortPerform + 386 (in CoreFoundation) [0x7fff88cf1e42]
                                  1 _ZL38PullEventsFromWindowServerOnConnectionjh + 69 (in HIToolbox) [0x7fff8b8e6ce6]
                                    1 CGEventCreateNextEvent + 29 (in CoreGraphics) [0x7fff8c2c2025]
                                      1 CGSGetNextEventRecordInternal + 110 (in CoreGraphics) [0x7fff8c273cf7]
                                        1 snarfEvents + 437 (in CoreGraphics) [0x7fff8c273ff4]
                                          1 CGSDispatchDatagramsFromStream + 268 (in CoreGraphics) [0x7fff8c27440f]
                                            1 CGSDecodeEventRecord + 98 (in CoreGraphics) [0x7fff8c2b2202]
                                              1 CGEventCreateFromDataAndSource + 224 (in CoreGraphics) [0x7fff8c2b232e]
                                                1 CGTypeCreateInstanceWithAllocator + 69 (in CoreGraphics) [0x7fff8c1b2255]
                                                  1 _CFRuntimeCreateInstance + 400 (in CoreFoundation) [0x7fff88cf2ea0]
                                                    1 malloc_zone_malloc + 77 (in libsystem_c.dylib) [0x7fff90d373c8]
                                                      1 szone_malloc_should_clear + 1115 (in libsystem_c.dylib) [0x7fff90d0200e]
                                                        1 tiny_malloc_from_free_list + 1046 (in libsystem_c.dylib) [0x7fff90d01711]
                                                          1 tiny_free_list_add_ptr + 224 (in libsystem_c.dylib) [0x7fff90cf7b6e]
      Kernel stack:
        30 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
        1 hndl_mach_scall64 + 19 (in mach_kernel) [0xffffff80002d8383]
          1 thread_set_child + 336 (in mach_kernel) [0xffffff80002aeb80]
            1 mach_msg_overwrite_trap + 442 (in mach_kernel) [0xffffff800021bc5a]
              1 ipc_mqueue_receive + 63 (in mach_kernel) [0xffffff80002157ff]
                1 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f383]
                  1 thread_go + 608 (in mach_kernel) [0xffffff800022dfd0]
                    1 processor_idle + 149 (in mach_kernel) [0xffffff800022d2e5]
                      1 machine_idle + 163 (in mach_kernel) [0xffffff80002c4213]
        1 hndl_allintrs + 290 (in mach_kernel) [0xffffff80002d7bd2]
          1 interrupt + 192 (in mach_kernel) [0xffffff80002c2790]
            1 lapic_interrupt + 121 (in mach_kernel) [0xffffff80002c7859]
              1 cpu_signal_handler + 172 (in mach_kernel) [0xffffff80002c970c]
                1 sync_iss_to_iks + 118 (in mach_kernel) [0xffffff80002c1bc6]
      Thread 0x5a7        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x169bbc   
      User stack:
        32 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff90ce8b85]
          32 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff8be23192]
      Kernel stack:
        32 workqueue_exit + 1616 (in mach_kernel) [0xffffff80005a1660]
      Binary Images:
             0x1044c8000 -        0x1044f5fff  com.apple.ActivityMonitor 10.7.3 (714) <58B0F2D5-5BC2-3F31-A0F4-D8E453FD6853> /Applications/Utilities/Activity Monitor.app/Contents/MacOS/Activity Monitor
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8b8cf000 -     0x7fff8bbf9ff7  com.apple.HIToolbox 1.8 (???) <D6A0D513-4893-35B4-9FFE-865FF419F2C2> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff8c1a8000 -     0x7fff8cb387a7  com.apple.CoreGraphics 1.600.0 (???) <177D9BAD-72C9-3ADF-A391-5B88C5EE623F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
          0x7fff90c97000 -     0x7fff90d74fef  libsystem_c.dylib ??? (???) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
          0x7fff90ff8000 -     0x7fff91bfcfff  com.apple.AppKit 6.7.3 (1138.32) <A9EB81C6-C519-3F29-89F1-42C3E8930281> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Process:         activitymonitord [179]
    Path:            /usr/libexec/activitymonitord
    Architecture:    x86_64
    UID:             0
      Thread 0x600      
      User stack:
        32 ??? (in activitymonitord) [0x10479bccc]
          32 ??? (in activitymonitord) [0x10479d49b]
            32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Binary Images:
             0x10479b000 -        0x1047a3ff7  activitymonitord ??? (???) <842D0122-27CE-38C2-B3AD-164E6A7FC8CA> /usr/libexec/activitymonitord
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
    Process:         Address Book [15990]
    Path:            /Applications/Address Book.app/Contents/MacOS/Address Book
    Architecture:    x86_64
    UID:             501
      Thread 0x46d68      DispatchQueue 1
      User stack:
        32 ??? (in Address Book) [0x10acab3b0]
          32 NSApplicationMain + 867 (in AppKit) [0x7fff9127bb88]
            32 -[NSApplication run] + 470 (in AppKit) [0x7fff90ffd19d]
              32 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff91000861]
                32 _DPSNextEvent + 659 (in AppKit) [0x7fff91000f5d]
                  32 BlockUntilNextEventMatchingListInMode + 62 (in HIToolbox) [0x7fff8b8d8456]
                    32 ReceiveNextEventCommon + 355 (in HIToolbox) [0x7fff8b8d85c9]
                      32 RunCurrentEventLoopInMode + 277 (in HIToolbox) [0x7fff8b8d131f]
                        32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                          32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                            32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                              32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x46d82      DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Binary Images:
             0x10aca9000 -        0x10acecfff  com.apple.AddressBook 6.1 (1083) <84A7B30D-CF09-3CB0-B71D-1B61DAC9B180> /Applications/Address Book.app/Contents/MacOS/Address Book
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8b8cf000 -     0x7fff8bbf9ff7  com.apple.HIToolbox 1.8 (???) <D6A0D513-4893-35B4-9FFE-865FF419F2C2> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff90ff8000 -     0x7fff91bfcfff  com.apple.AppKit 6.7.3 (1138.32) <A9EB81C6-C519-3F29-89F1-42C3E8930281> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    Process:         AirPort Base Station Agent [223]
    Path:            /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
    Architecture:    x86_64
    UID:             501
      Thread 0x7e5      
      User stack:
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x7fd      
      User stack:
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x811      
      User stack:
      Kernel stack:
        32 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
      Thread 0x812      
      User stack:
      Kernel stack:
        32 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002d8363]
          32 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005caa7b]
            32 psynch_cvwait + 1913 (in mach_kernel) [0xffffff800059f149]
              32 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
                32 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
                  32 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
                    32 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
      Binary Images:
             0x107009000 -        0x107020fff  com.apple.AirPortBaseStationAgent 1.5.5 (155.7) <4B2DADB0-223B-32AA-9438-30FBEA0A8FE6> /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
    Process:         aosnotifyd [79]
    Path:            /usr/sbin/aosnotifyd
    Architecture:    x86_64
    UID:             0
      Thread 0x259        DispatchQueue 1
      User stack:
        32 start + 52 (in aosnotifyd) [0x10a5a70bc]
          32 main + 74 (in aosnotifyd) [0x10a5ae9f4]
            32 -[AOSNotificationDaemon startup] + 1294 (in aosnotifyd) [0x10a5ae7bb]
              32 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff89ed2f9f]
                32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                  32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                    32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                      32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x30a        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x390      
      User stack:
        32 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          32 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            32 __NSThread__main__ + 1575 (in Foundation) [0x7fff89f216c6]
              32 -[NSThread main] + 68 (in Foundation) [0x7fff89f2174e]
                32 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335 (in Foundation) [0x7fff89f2cffb]
                  32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                    32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                      32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                        32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x444      
      User stack:
      Kernel stack:
        32 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
      Binary Images:
             0x10a5a5000 -        0x10a5e6fff  aosnotifyd ??? (???) <750811D8-1A2D-3F5A-B157-8A35B8FB04DB> /usr/sbin/aosnotifyd
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff89ec7000 -     0x7fff8a1e0ff7  com.apple.Foundation 6.7.1 (833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff90c97000 -     0x7fff90d74fef  libsystem_c.dylib ??? (???) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
    Process:         applepushserviced [78]
    Path:            /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
    Architecture:    x86_64
    UID:             0
      Thread 0x258        DispatchQueue 1
      User stack:
        32 ??? (in applepushserviced) [0x10c7248d4]
          32 ??? (in applepushserviced) [0x10c7249b8]
            32 -[NSRunLoop(NSRunLoop) run] + 62 (in Foundation) [0x7fff89ed2e8b]
              32 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff89ed2f9f]
                32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                  32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                    32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                      32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x288        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x41b      
      User stack:
        32 thread_start + 13 (in libsystem_c.dylib) [0x7fff90ce8b75]
          32 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff90ce58bf]
            32 __select + 10 (in libsystem_kernel.dylib) [0x7fff8be22df2]
      Kernel stack:
        32 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
      Binary Images:
             0x10c723000 -        0x10c791ff7  applepushserviced ??? (???) <99ACA6F5-6DCE-34D6-A4C6-7D8DE7B88173> /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff89ec7000 -     0x7fff8a1e0ff7  com.apple.Foundation 6.7.1 (833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff90c97000 -     0x7fff90d74fef  libsystem_c.dylib ??? (???) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
    Process:         AppleSpell [194]
    Path:            /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
    Architecture:    x86_64
    UID:             501
      Thread 0x6d0        DispatchQueue 1
      User stack:
        32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
          32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x6d4        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Binary Images:
             0x107376000 -        0x107432ff7  com.apple.AppleSpell 1.7.1 (131.1) <A994D9F1-C4D8-3361-B0F4-112A7BAED8BD> /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
    Process:         autofsd [76]
    Path:            /usr/libexec/autofsd
    Architecture:    x86_64
    UID:             0
      Thread 0x293        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x300        DispatchQueue 6
      User stack:
        32 _dispatch_sig_thread + 45 (in libdispatch.dylib) [0x7fff8b8c4954]
          32 __sigsuspend_nocancel + 10 (in libsystem_kernel.dylib) [0x7fff8be23022]
      Kernel stack:
        32 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
      Thread 0x169c00   
      User stack:
        32 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff90ce8b85]
          32 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff8be23192]
      Kernel stack:
        32 workqueue_exit + 1616 (in mach_kernel) [0xffffff80005a1660]
      Binary Images:
             0x1043d5000 -        0x1043d6fff  autofsd ??? (???) <A02D5E70-1BB1-30ED-A699-375CB0CCE901> /usr/libexec/autofsd
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
          0x7fff90c97000 -     0x7fff90d74fef  libsystem_c.dylib ??? (???) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
    Process:         blued [22]
    Path:            /usr/sbin/blued
    Architecture:    x86_64
    UID:             0
      Thread 0x155        DispatchQueue 1
      User stack:
        32 ??? (in blued) [0x105e59e78]
          32 ??? (in blued) [0x105e8f6af]
            32 -[NSRunLoop(NSRunLoop) run] + 62 (in Foundation) [0x7fff89ed2e8b]
              32 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff89ed2f9f]
                32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                  32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                    32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                      32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x159        DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Thread 0x193      
      User stack:
      Kernel stack:
        32 wakeup + 992 (in mach_kernel) [0xffffff80005526a0]
      Binary Images:
             0x105e58000 -        0x105f0dfff  blued ??? (???) <85D33825-1A68-3F2C-A78D-6B9E43F3DCA9> /usr/sbin/blued
          0x7fff88cef000 -     0x7fff88ec3fff  com.apple.CoreFoundation 6.7.1 (635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
          0x7fff89ec7000 -     0x7fff8a1e0ff7  com.apple.Foundation 6.7.1 (833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
          0x7fff8b8c0000 -     0x7fff8b8cefff  libdispatch.dylib ??? (???) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
          0x7fff8be0c000 -     0x7fff8be2cfff  libsystem_kernel.dylib ??? (???) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
    Process:         Calculator [55896]
    Path:            /Applications/Calculator.app/Contents/MacOS/Calculator
    Architecture:    x86_64
    UID:             501
      Thread 0x12e12f     DispatchQueue 1
      User stack:
        32 ??? (in Calculator) [0x100c026ac]
          32 NSApplicationMain + 867 (in AppKit) [0x7fff9127bb88]
            32 -[NSApplication run] + 470 (in AppKit) [0x7fff90ffd19d]
              32 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff91000861]
                32 _DPSNextEvent + 659 (in AppKit) [0x7fff91000f5d]
                  32 BlockUntilNextEventMatchingListInMode + 62 (in HIToolbox) [0x7fff8b8d8456]
                    32 ReceiveNextEventCommon + 355 (in HIToolbox) [0x7fff8b8d85c9]
                      32 RunCurrentEventLoopInMode + 277 (in HIToolbox) [0x7fff8b8d131f]
                        32 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff88d27676]
                          32 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff88d27e64]
                            32 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff88d1f6fc]
                              32 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff8be2167a]
      Kernel stack:
        32 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff80002158b0]
      Thread 0x12e140     DispatchQueue 2
      User stack:
        32 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff8b8c214e]
          32 kevent + 10 (in libsystem_kernel.dylib) [0x7fff8be237e6]
      Kernel stack:
        32 kqueue_scan + 416 (in mach_kernel) [0xffffff8000537d10]
      Binary Images:
             0x100bfd000 -        0x100c12fff  com.apple.calculator 10.7.1 (117) &

    I am still having the problem. I have noticed a pattern to the seemingly random freezes.
    The iPod is stopping to Sync at almost predictable points during the sync. The first stoppage occurs around the 1.9GB part of the sync. This has not always been the same file but it is always around the same place.
    When I sync in small chunks the freeze occurs at almost the same place every time. As soon as it freezes, iTunes is toast and the entire computer needs to be restarted.
    Anyways, the freeze happens around every 2GB's of data transferred. It does not have to be in one chunk, it is almost like it is happening on the iPod. Like the iPod is kicking itself out of the sync at certain points along it's hard drive or something. Once it freezes and I restart the computer, I can transfer another 2 GB before it freezes again... then restart, repeat. Finally I was able to load up the 14.8 GB I had in my iTunes. Several hours later... not sure if I should take the iPod back or not. If it is the iPod and that fixes the problem great... but if it is my machine, I get another 3-4 hours syncing and restarting my computer. Wheeee!

  • Unknown error (-50) during iPhone syncing

    I've been consistently getting an error message during WiFi syncing of my iPhone 5 which says, "The iPhone cannot be synced.  An unknown error occured (-50)"  What should I do to correct this?

    error code 50 http://support.apple.com/kb/TS3694#error50  follow instructions to resolve.

  • My 5 keeps pausing conversations during a call, how can I get it to lock

    My cheek or ear always mutes the conversation during a call. Is there a way to get it to auto lock during a call?

    It sounds like you have a problem with the proximity sensor that turns the screen off when you are on the phone. Do you have a case on the phone? If you do, try taking the case off and test a call. See if the screen turns off when you bring the phone up to your ear. If it does, it is possible the case is blocking something in the proximity sensor which is not allowing it to work properly. If it still does not work after taking the case off, you can perform the user troubleshooting, power off/on, reset by holding the sleep/wake and home buttons together until you see the Apple logo and then release. If that doesn't work, then a restore, first from a backup and if needed then as a new device if necessary.

  • Could you pls give the details about the Unicode conversion during Upgrade

    Hi,
    Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
    Waiting for quick response
    Best Regards,
    Padhy

    Hi,
    These are the few points i gathered during my upgradation project.
    Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
    So it is advised to keep a back-up of the existing system.
    Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
    Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
    Version Upgrade involves the following Steps.
    Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
    • First copy the entire E4B system into the E1B System which is created for Version 4.7.
    • Apply the Version 4.7 CD provided by SAP over the E1B System.
    • Now check whether all the functionalities that was in E4B system works fine with E1B system also.
    Thus the Version Upgrade involves two steps.
    1. SAP Upgradation with the help of the CD
    2. Manual Upgradation.
    1. SAP Upgradation with the help of the CD
    This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
    2. Manual Upgradation.
    This Manual Upgradation involves
    2.1 Upgradation of Standard Objects
    2.1.1 SPAU Objects
    2.1.2 SPDD Objects
    2.2 Upgradation of Custom Objects.
    Upgradation of Custom Objects can be placed under the following three categories.
    Unicode Compliance
    Retrofit
    Upgrade
    Please Find below some of the common Unicode Errors and their solutions
    1. Error:
    In case of Translate Error; ‘Dangerous use of Translate in Multilingual system.’
    Correction:
    To correct the Error occurring on TRANSLATE statement – use this additional statement before the Translate statement.
    SET LOCALE LANGUAGE sy-langu.
    This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is “sy-langu”, i.e. the log on language of the user.
    2. Error:
    In case of Open Dataset Error; ‘Encoding Addition must be included.’
    Correction:
    This Error occurs only when the MODE is TEXT.
    To correct the Error occurring on OPEN DATASET statement – use this statement instead.
    OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
    Where: dataset_name – NAME OF THE DATASET.
    Access – INPUT or OUTPUT or APPENDING or UPDATE.
    DEFAULT - Corresponds to UTF-8 in UNICODE systems &
    NON_UNICODE in NON-UNICODE systems.
    3. Error:
    In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; ‘Function module UPLOAD is flagged as obsolete.’
    Correction:
    The FM GUI_DOWNLOAD/UPLOAD is used.
    The variations to be made in the parameters of the FM:
    1. Filename – It must be of STRING type.
    2. Filetype – “DAT” is not used any longer, instead “ASC” is used.
    3. Field Separator – The default value “SPACE” is used, incase for a TAB separated file “X” can be used.
    4. Error:
    In case of CURRENCY/UNIT Addition Error; ‘Use addition CURRENCY/UNIT when outputting.’
    Correction:
    The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
    To correct this error follow the following method:
    WRITE: /3 'TOTAL',' ', TOTAL.
    WRITE: /3 ‘TOTAL’,’ ‘, TOTAL CURRENCY ‘2’. --- Where ‘2’is the Currency Key for Getting 2 decimal places.
    5. Error:
    In case of TYPE X Error; ‘Variable must be of C, N, D, T or STRING type.’
    Correction:
    We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
    So the method to be followed is:-
    1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
    2. Declare the variable as Type C, and use the method UCCP(‘XXXX’) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute “HORIZONTAL_TAB” of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
    E.g.:
    i) *DATA: TAB TYPE X VALUE 09, “Tab character
    CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    ii) * DATA: CHAR TYPE X VALUE 160.
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA CHAR TYPE C.
    CHAR = CL_ABAP_CONV_IN_CE=>UCCP(‘00AO’).
    (Here ‘00A0’ is the Hexadecimal equivalent of the decimal 160).
    3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
    E.g.:
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA : LF(2) TYPE X VALUE 'F5CD'.
    DATA : BEGIN OF LF,
    A1 TYPE C,
    A2 TYPE C,
    END OF LF.
    LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
    LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
    6. Error:
    In case of the Character “-“Error; ‘The Character “-“can’t appear in names in Unicode Programs.’
    Correction:
    The Character “-“(Hyphen) appearing in Variable names is replaced by the character “_” (Under Score) for Unicode/Upgrade Compliance.
    E.g.:
    *wk-belnr LIKE bkpf-belnr,
    *wk-xblnr LIKE bkpf-xblnr,
    *wk-date LIKE sy-datum,
    *wk-wrbtr LIKE bseg-wrbtr,
    *wk-name1 LIKE lfa1-name1,
    *wk-voucher(8) TYPE c.
    wk_belnr LIKE bkpf-belnr,
    wk_xblnr LIKE bkpf-xblnr,
    wk_date LIKE sy-datum,
    wk_wrbtr LIKE bseg-wrbtr,
    wk_name1 LIKE lfa1-name1,
    wk_voucher(8) TYPE c.
    7. Error:
    In case of The SUBMIT-TO-SAP-SPOOL Error; ‘you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition. ‘
    Correction:
    1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
    2. Call the FM GET_PRINT_PARAMETERS:
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    3. Use the SUBMIT-TO-SAP-SPOOL statement.
    E.g.:
    •     submit zrppt500
    •     using selection-set 'AUTO3'
    •     with res_no eq lo_rsnum
    •     with sreserv in preserv
    •     to sap-spool destination p_dest
    •     immediately 'X'. "print immediate
    DATA: print_parameters type pri_params,
    archive_parameters type arc_params,
    valid_flag(1) type c.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    Submit zrppt500
    Using selection-set 'AUTO3'
    With res_no eq lo_rsnum
    with sreserv in preserv
    to sap-spool
    SPOOL PARAMETERS PRINT_PARAMETERS
    ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
    WITHOUT SPOOL DYNPRO.
    8. Error:
    In case of Message Error; ‘Number of WITH fields and number of Place Holders are not same ‘.
    Correction:
    Split the statement after WITH into the same number as the place holder for that Message ID.
    E.g.:
    1. * MESSAGE E045.
    MESSAGE E045 WITH '' ''.
    2. in program ZIPI0801
    •     Start of change for ECC6
    •     message e398(00) with 'Could not find access sequence'
    •     'for condition type:'
    •     p_ptype.
    message e398(00) with 'Could not find '
    'access sequence'
    'for condition type:'
    p_ptype.
    •     End of change made for ECC6
    9. Error:
    In case of Move between 2 different Structures; ‘The structures are not mutually convertible in a Unicode program.’
    Correction:
    Make both the Data Types compatible and then assign the contents.
    E.g.:
    The statement –“move retainage_text to temp_text.” Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
    A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
    TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
    TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
    TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
    TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
    TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
    TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
    TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
    10. Error:
    In case of ‘no description found’; ‘add a GUI title’.
    Correction:
    In this type of error gui title is generally missing so add a GUI title to the module pool.
    11. Error:
    In case of ‘writing internal or transparent table’
    Correction:
    Write individual fields.
    E.g.:
    WRITE: / EXT. --> EXT should be a character type field
    WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
    12. Error:
    In case of ‘combination reference table/field S541-UMMENGE does not exist’
    Correction:
    Was due to error in reference table S541. TABLE S541 has errors
    1)”Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)”
    2)”Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)”
    Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
    And that of ZMKCODE (from ZACCODE to ATTR8)
    13. Error:
    In case of ‘KEY does not exist’
    Correction:
    The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
    14. Error:
    Incase of ‘WRITE’ statement, ‘Literals that take more than one line is not permitted in Unicode systems.’
    Correction: To correct this error, we need to align the spaces accordingly so that the statement doesn’t go beyond the line.
    15. Error:
    Incase of Data statement, ‘The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect………..’
    Correction: To correct this error, instead of “like” in the Data statement, use “type”.
    16. Error:
    Incase of DESCRIBE statement, ‘DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.’
    Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
    CHARACTER MODE is added when the data object is of flat/ character type.
    BYTE MODE is added when the data object is a deep structure.
    Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
    LENGTH clen IN CHARACTER MODE.
    Where blen and clen must be of type I.
    17. Error:
    Incase of DO-LOOP Error,’ In Do loop range addition needed‘
    Correction:
    An internal tables is declared and the two fields (VARYING field and NEXT field) were
    Included inside the internal table
    E.g.: In program SAPMZP02
    DO 11 TIMES
    •     VARYING STATION_STATE FROM STATION1 NEXT STATION2. “ECC6
    CASE SYST-INDEX.
    WHEN ‘1’
    STATION_STATE = STATION1.
    WHEN ‘2’
    STATION_STATE = STATION2.
    WHEN ‘3’
    STATION_STATE = STATION3.
    WHEN ‘4’
    STATION_STATE = STATION4.
    WHEN ‘5’
    STATION_STATE = STATION5.
    WHEN ‘6’
    STATION_STATE = STATION6.
    WHEN ‘7’
    STATION_STATE = STATION7.
    WHEN ‘8’
    STATION_STATE = STATION8.
    WHEN ‘9’
    STATION_STATE = STATION9.
    WHEN ‘10’
    STATION_STATE = STATION10.
    WHEN ‘11’
    STATION_STATE = STATION11.
    18. Error:
    Incase of the parameter QUEUE-ID Error,’ QUEUE-ID’ is neither a parameter nor a select option in program rsbdcbtc.’
    Correction:
    The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
    E.g.: In program Z_CARRIER_EDI_INTERFACE
    •     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
    •     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
    Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
    19. Error:
    Incase of EPC Error,’ Field symbol <TOT_FLD> is not assigned to a field ‘.
    Correction:
    This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
    The OS Note - 1036943 needs to be applied.
    Error:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
    Correct:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    Error:
    Constants : c_tab type x value '09' .
    Correct:
    Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
    Error:
    Data : begin of output_options occurs 0 . Include structure ssfcompop.
    Data : end of output_options .
    Correct:
    Data : output_options type standard table of ssfcompop with header line .
    Error:
    PARAMETERS : NAST TYPE NAST .
    Correct:
    PARAMETERS : NAST TYPE NAST NO-DISPLAY .
    Replace WS_DOWNLOAD and WS_UPLOAD by
    GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
    For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
    Issue:
    Moving data from one structure to another structure if those two structures are not compatible
    Solution:
    we should use move-corresponding or field by filed we need to move it.
    If database structures are different in 4.6c and ECC6.0,
    Then we should go with append structure concept.
    While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
    Also Check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
    Reward points if helpful.
    Regards,
    Ramya

  • Help- During the syncing proccess, it stops/freezes

    Help- During the syncing process, it stops/freezes on step 5: Waiting for changes to be applied, and nothing happens.
    This problem just started after the newest system update.
    Any suggestions on how to get this to work?

    Try:
    Re: "Waiting for changes to be applied"
    Waiting for changes to be applied solution
    stuck on waiting for changes to be applied

  • Transformation during LDAP Sync reconciliation in OIM 11g

    Does anyone know if the use of transformations is supported in LDAP Sync reconciliation in OIM 11g?
    The reconciliation of LDAP User records is defined in /db/LDAPUser in the OIM metadata. The default version of this file has entries to specify OneToOne transformations, e.g.
    <Transformation name="OneToOne">
    <Parameter name="givenname" fieldname="givenname"/>
    </Transformation>
    For one of my attributes I wish to perform a custom transformation, and have implemented a transformation method as a GC provider (i.e. developed a Java class implementing the TransformationProvider interface and defined this Transformation in an xml file in the metadata path /db/GTC/ProviderDefinitions. I have uploaded a new version of LDAPUser that references my custom transformation provider for one of the LDAP attributes.
    When I try and perform an LDAP Sync user reconciliation, my custom class does not seem to be getting called when I generate a reconciliation event for the affected attribute. I also do not see any logs indicating a failure to load my provider. I have also turned up all the relevant log levels I can identify, and can see no record of OIM doing anything related to transformationat all (e.g. even calling the standard OneToOne transformation provider).
    I am suspicious that although LDAPUser has transformation entries, this may be misleading and transformation is not being performed at all for LDAP Sync.
    Does anyone else have experience of using transformation providers during LDAP Sync reconciliation?

    Thanks for your reply Nishith
    I need some suggestion from you.I have installed OID 11.1.1.6.0 and OIAM 11G R2(not configured ).
    while performing the OIM configuration can I use Enable Ldap sync or I need to finish the OIM configuration first and then do the ldap sync.
    Regards
    sri

  • Yes I bought it and it wouldent play off my iPhone , so I bought it off my iPad 2 and lost it during a sync episode so I bought it twice and never sew it . It so hard to talk to some one when you rent movies from iTunes they get the money fast but if you

    Yes I bought it and it wouldent play off my iPhone , so I bought it off my iPad 2 and lost it during a sync episode so I bought it twice and never sew it . It so hard to talk to some one when you rent movies from iTunes they get the money fast but if you have any trouble it's a series of things befor you get any real help that *****

    iTunes support would be the only way i'm afraid.
    http://www.apple.com/support/itunes/contact/

  • Value conversion during syndication.

    Hi All,
    I need to do a value conversion during syndication of records out of MDM. The values maintained in my MDM Repository is true and false while the destination system can only read Y and N. What would be the best option to have this value conversion done during the auto syndication?
    Appreciate your responses.
    - Aditya

    One way to handle this is by using key mapping on a lookup table instead of a boolean field.  Often times your remote systems will have different internal values than the ones you are storing in your system.  For example, you may store "True" or "False" as values in your MDM repository, however ECC doesn't accept those values, instead it wants "X" or "NULL".  Likewise, a third-party system may expect "T" or "F".  The same thing goes for other fields in your repository (ie: country codes, region values, etc).  In cases such as this, you should create a lookup table with key mapping enabled.  Then, you can maintain different values based on the remote system.  In other words, you may store the value "TRUE" in your lookup table, but the key mapping for true may maintain "X" for ECC and "T" for a legacy system that you define in the console.  Then, when you build your syndication map, you may the remote key to the destination field instead of mapping the actual code value of your repository.  This way the correct value will always get syndicated to the partner system regardless of what system is being syndicated to.
    Does that make sense?

  • During itunes sync i get an error message "iphone cannot be synced. the required file cannot be found." Why is this happening?

    During itunes sync i get an error message "iphone cannot be synced. the required file cannot be found." Why is this happening?

    Close "iPhoto" if it is open. Open the "Pictures" folder and right-click on "iPhoto Library." Select "Show Package Contents." Right-click the "iPod Photo Cache" folder, select "Move to Trash" and sync your iPhone. The error message should no longer appear.
    if that doesn't work,
    uninstall itunes and download the lastest version

  • Laptop restarts sometimes during hot sync

    Why does my laptop crash on occasion during hot sync?  Laptop is a HP with AMD 2 GHz processor, 2 GB RAM and plenty of disc space.  At times I do get "failed to backup one file", PMTracedatabase, Protocol Error: Handheld file could not be opened (4004), SYNCERR_FILE_NOT_OPEN.  Phone is a Centro and I have done the updates/downloads.  Thanks.
    Post relates to: Centro (Sprint)

    What are the Palm files you are referring to? Are these the files from the Palm desktop user folder?
    You can do a sync after the re-install with the conduits set at handheld overwrites desktop to sync the data from the Centro to the PC.  To make sure you have the data backed up, use the procedure below.
    The best way to preserve your data is to export the data in each application (contacts, calendar, etc.) in Palm Desktop to a seperate folder on your PC.
    Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
    Make sure you select all for the range in the export window.
    With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
    Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
    With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
    Here are the "clean" uninstall instructions for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your Palm desktop from the CD and do a hotsync. If you have the data intact on the device, set the conduits to handheld overwrites desktop.
    If it asks you for a username, enter the name that is on your device in the upper right corner of the hotsync screen.

  • I "sent as gift" two songs to a friend. She can't find them. Are they sent to her in an email? Will they download during a sync? How can we recover the songs and get them to her iPhone?

    I "sent as gift" two songs to a friend. She can't find them. Are they sent to her in an email? Will they download during a sync? How can we recover the songs and get them to her iPhone?

    Try going to iTunes Store from the left column, then Account, then Purchase History, then Manage Gifts.

  • I somehow lost all of my contact during a sync yesterday, how do I get them back on the phone?

    I somehow lost all of my contact during a sync yesterday, how do I get them back on the phone?

    Your contacts should be available on your computer. Were the contacts lost in the address book on your computer that is supported for syncing contacts with your iPhone?

Maybe you are looking for

  • New computer, how can I move all my music from my old computer?

    I have just bought a new computer, but all of my music in iTunes for my iPod is on my old computer. How can I transfer my music to the new computer?

  • Change port number of application server

    Hi members, I have installed oracle application server 10.1.3 on a windows 2003 server. The default port that it is listening on is 8888. Is there a way to change the port number? Can you please tell me the procedure? Also, how can I change the port

  • Validate or Pre-Flight PDF file

    Hi all, I'm a programmer with a company that is printing PDF files using HP Indigo presses, which have Harlequin rips to rasterize the PDF file. We occasionally have a file that fails to get ripped, but the rip doesn't really tell me very much about

  • Naming Service in Oracle Net Manager

    Hello, I've downloaded ODTwithODAC1020221.exe and did the install ODP.NET sucessfully and when I try to create a Naming Service by Clicking on the + icon nothing happens. I have a working TNSNAMES.ORA in the ADMIN/NETWORK folder where I installed the

  • Problems recovering SYSAUX

    Dear All I have a 10g database running on redhat EL 4.2. This morning I tried to run a flashback query on one of the tables only to be told there was a problem with one of the datafiles. Further investigation showed this to be the datafile containing