Alarm clock after 5800 update

Hi,
last days i updated my nokia 5800 and now when the alarm clock rings,i can't use the touch to stop it,i have to attend it finishes to ring and then i can disable it from the menu.
There's a solution to my problem?
Thanks a lot.
Simo
Solved!
Go to Solution.

Hi everybody,
(I don't know where exactly write my question, this topic seems to be good.)
Is there any chance to change alarm-clock ringing from 1 minutes to more minutes?
May it be changed through the system file(s), in something like .ini file ?
I have V52.0.007, N5800XM
Thank you for some answers or ideas.
PS: Sorry for my English

Similar Messages

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

How to: Turn of the alarm clock after you've pressed snooze?

Hello,
In the morning I like to use snooze once or twice and because there's a possibility of falling asleep again, I always use snooze instead of turning of the clock. However, when I do get up, I'd like to turn of the alarm and snooze, which I cannot find out how to do. I always have to wait for it to go of again, so I can turn it of.
I have found out that if you go to clock -> alarm clock feature, turn off and on again the alarm clock, it solves the issue, but the everyday clicking of that is frustrating.
Is there an faster easier way?
I also noticed there is a snooze countdown on the screen, but sliding it, does not turn it off.
Thanks,
Reg,
MG

If you found a solution to your problem, you should tell what it is - there might be others with the same question (That's why there is a search function)
The forum isn't just for you.

Issues with Alarm Clock after DST switch

Since ages now my iPhone's alarm clock is setting off at 6am...Since ages? Yep! True! But, actually: BUT not any more since the DST switch last weekend.
Since then it sets off one hour late!!!
And this without having changed anything in the definition of the alarm!
And this with the phone's time displaying the right (winter) time!

This is an acknowledged bug on iOS4.1 (at least according to an article on the Guardian). It was found about 3 weeks ago in Australia and NZ where DST change happened then. It only affects recurring alarms (one-off alarms are working fine). I have to do some research but it looks that also affected some calendar appointments set on time zones different than mine. The recommended action is to set up one-off alarms only but I find better to set my recurring alarms one hour early until a patch is issued by Apple.

Help! Can't connect to internet or reset clock after Java update.

Software update just installed the update Java SE 6 to 1.6.0_20 on my Mac Mini with Snow Leopard 10.6.3. After the restart I got a warning: "Your computer's clock is set to a date before Jan. 1, 2008. This may cause some applications to behave erratically." NO Kidding!
Immediately after that warning window appears another one comes up saying "None of your preferred networks is available" and it shows the listing of all the internet network names in my area. If I select mine (which is listed AND is available because I'm using it with my other computer right now) I can't click on the "join" button because it's "grayed out".
If I go to "Network Diagnostics" and attempt to connect through there it rejects my WPA password. WHY IS IT THAT I HAVE TO GO THROUGH SETTING THIS UP ALL OVER AGAIN ANYWAY???
Also I cannot put in the correct Date and Time in system preferences because it's all grayed out.
Do I need to uninstall? How? I greatly appreciate your help!!

"Zapping the PRAM" was something I used to do on my old power mac before OSX. Maybe that's not related to your PRAM battery statement, tho. This is a new Mac Mini, less than a year old. I'm guessing that the problem is with this JAVA update is NOT compatible with Snow Leopard 10.6.3, but that was never mentioned in info/details of the update. My Mac was running great online and off before I let the Software Updater install.

Email after 5800 update

Hi,
I have just updated my 5800. It works much better now but the email has gone from the homescreen. I have checked the settings and this says it should be there. Any ideas?
Thanks
Solved!
Go to Solution.

I presume that u have updated to v40, email notifications appears only when you select 'contacts bar' as you homescreen theme provided you should have selected the mailbox name for which the mail settings are setup. Main drwback of contacts bar is it doesn't display calender entries on the homescreen.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Alarm Clock going Crazy after updating 3GS

After updating to iOS 4.1 on my 3GS when I set the alarm clock for 7am it goes off at 6am.
How can I get my phone's alarm to go off at the time a set it to, instead of an hour earlier?

I have the same problem, and so did everyone at uni I asked this week, but it seems to only be the alarms that are set to repeat each week, if you set a "one off" alarm it goes off at the right time which makes it more confusing. Must have something to do with daylight savings and the fact the government keeps making it start earlier and earlier each year.

Alarm clock missing after OS update

Hi, I recently updated to the latest OS, and have a major issue with the alarm clock (Curve 8520).
The red alarm clock time has disappeared from below the main clock display, and will not appear when I go to menu then set alarm.
Luckily I am off work this week, so don't need it, but do require it back.
I have tried a battery pull etc, but all to no avail.
Please help.
Many thanks

Please make sure to set your alarm to ON and not to Weekend to test. The red text will hide during the weekend itself. If it is because of the new OS, have you tried downgrading back one revision or checking the responses people have given on this OS?
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

IPhone Alarm Clock issue after iOS4.0 upgrade

This is a strange one;
Upgraded to i0S4.0 couple of days ago, and since then the default alarm clock app has gone haywire. It has duplicated each of my alarms (I must've had about 9 in there fore various things) about 50 times.
If I try and delete them, they disappear but if I exit and then re-enter the app, they're all there again!
Any suggestions?
Cheers.

I'm having the same issue. I had 8 or 9 legitimate alarms set, as well, but now there are somewhere between 1500 and 2000 with a couple hundred duplicates of each one. The number of duplicates is growing, too, but I can't tell if the additions happen each time I sync the phone or each time the clock program is reloaded on the phone. I noticed this first on my 3G after upgrading it, and it is also happening on the iPhone 4 having all my data transferred from a backup made of the 3G running 4.0. I've also noticed that if I try to delete them from my phone, at some point the clock program becomes nearly unresponsive causing even other programs than the clock to crash and requiring the phone to be resynced.
I've seen a couple of people mentioning similar issues in other threads that sound like they could be related or even the same, and they are always talking about upgrades on the same phone. There doesn't seem to be anyone affected who transferred directly from a 3.x device to a new 4.0 device.
While not a solution, here's at least my suggestion of why it's happening. I've poked around a bit in the backup files stored on my laptop from this phone (under ~/Library/Application Support/MobileSync), and I've found two different plist files in the same backup storing the alarms in two slightly different formats.
This is purely conjecture, but I would guess what happened is the location & format between 3.x and 4.0 of where the alarm data is stored changed. The "upgrade" isn't a complicated process that mulls over and handles situations like this during the install. It's just a wholesale firmware replacement. Any changes like this would probably need to be handled by the actual programs themselves when they're running on the phone. Something in the upgrade process that's supposed to translate the old format to the new format is broken leaving behind the old data instead of removing it after the conversion, and every so often some trigger in the clock program (like a check for new data after a sync or just the initial loading when the phone restarts) is causing it to see that old 3.1 style data still there, redo the conversion process, and reimport what it finds as another set of duplicates.
That's only a guess, though, and as it's a one-way backup-only folder I can't edit them and resync to see if cutting them out of the data files on the laptop will remove them from the phone. Even if this is wrong, though, I can't imagine how it could be anything too far different from this. That would be a very simple bug to introduce into the code that would be specialized enough to be easy to overlook in testing. Again, that's all just a guess.
While I'm making wild speculations: I'm guessing the problem with the phone needing to be resynced when deleting several alarms is from one of these files on the phone storing the alarm data getting corrupted. If I was a betting man, I'd say this is likely due to corruption making the XML of the plist malformed from different threads writing changes to it simultaneously because it's so huge from all these entries and seeking through the file to update it is taking longer than anyone would reasonably expect and test for or program to protect against. Because, honestly, who thinks while coding something like this, "I need to make sure the user is safe when editing 2000 alarms..."

Help, since my update to my Iphone 4, it will no longer charge on my alarm clock docking station. The station I purchased four months ago from Target.

It will still charge my ipod,but not my iphone. I keep getting a message on my phone when I put it on the dock, saying that it is not supported by this divise. Please help. I am not going to go out and spend another 35.00 on an alarm clock when this one works perfectly fine, my phone is just being picky. Please help.

Talk to Toyota. The fault is in their in-car system. Talk to Toyota corporate. The dealers are clueless. Your system needs to be updated.

HT4972 since update to IOS 5.1.1 - problem with iluv IMM173 DUAL DOCK ALARM CLOCK DOCKING STATION. - CRASHES WHENEVER UPDATED IPHONE 4S CONNECTED

Hi, since most recent update (IOS 5.1.1) to my iphone 4s, I am experiencing problems(ONLY SINCE MOST RECENT IOS 5.1.1.UPDATE) with my 'iluv' IMM173 DUAL DOCK ALARM CLOCK DOCKING STATION.
Every time I connect my iphone it causes the docking station to crash/freeze and become totally non-responsive. However, if I remove my iphone, then connect my wife's
iphone 4 (IOS 5.0.10) The docking station then syncs time and date as normal with the iphone, and reverts back to function normally.
Has anyone else experienced the problem please, and if so, is there a remedy ?

macbarbicus wrote:
1. I cannot open my camera from the home screen. The icon is there but when you click on it it shakes and starts to open up but than slides down back to the home screen. I have tried closing the camera app resetting my phone but nothing seems to fix it. I can still open up the camera regularly by unlocking the phone first and than going to the camera app. But the camera button on the home screen just doesn't work for me anymore. I know with 5.1 they made it where it wont disappearing from the home screen so my guess is the issue must be related to that somehow.
From the locked screen, swipe the camera icon upwards to open the camera app. This is a new feature in 5.1.

Alarm clock issue after OS upgrade to 5..0.0.973

I upgraded to 5.0.0.973 and now I have issues with my alarm clock not displaying the time while charging at my bed side. I have Verizon and tried using the latest upgrade from Sprint. 5.0.0.1030 but the alarm clock issue remains. Rolling back the upgrade I am told would be one answer, but is there a way to dispose of the offending file somehow might be a good fix. Totally frustrated with BB at this point. One of the few things l like about my phone and they mess it up!! The Droids and the I-wanttobetrackedeverywhereIgophone is looking attractive these days.

Well i have the same issue, let me go over the items i have done.
First did the OTA upgrade. Issue happened.
then i downgraded to .886. worked normal.
Updated with Desktop Manager. Issue happened.
Wipe of Device to see if software conflict. Issue still happens.
also done several batteries pulls to see if that would fix it. still issue happens.
I've just downgraded again to .886 and it works. at this point i am going to be staying with .886 unless a fix is found for .973.

Alarm Clock Ringtone Changed after Upadting to iOS8

Hi there,
I have been having this problem and I wonder if anyone is also experiencing the same problem as well.
My alarm clock ringtone has been changed ever since I updated my iPhone 5s from iOS7 to iOS8. The ringtone is really short, which only lasts no more than 5 seconds.
In iOS7, it repeats itself for the alarm. However right now in iOS8, it only rings once, and only once, and that is it (which causes a problem for me to go to work because before it would repeat itself and now since it only rings once I also miss it. And I have been using this ringtone forever so I do not want to change).
So I am wondering if this is a bug, or if the features of the ringtone havebeen changed for iOS8?
Thanks for your answers and I really appreciate it.
Best regards.

My alarm continues to work exactly the same as it did under iOS 7. However, a few people seem to have had problems with alarms. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? You might also try deleting your alarms and redoing them.

After I set a repeating alarm clock to off, it goes back to on after a few seconds.

After I set a repeating alarm clock to off, it goes back to on after a few seconds. What is happening and how do I fix it? I have an iPod touch, 4th generation, iOS 5, no jailbreak whatsoever.

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

My macbook air is updated but now I can't download updates for My Alarm Clock, apps and iTunes.

My Mac will try to download the app to 100%, but then it tell me that it is unable to download. I have tried to turn off the firewall and restart. My itunes will not update My Alarm Clock or anything else.

(iTunes) iOS based apps (for iPhones, iPads, and the iPod touch) can be updated directly from the device.
Tap the App Store icon then tap Updates at the bottom of the display.
For your Mac...
- Temporarily disable anti virus software if installed.
- Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
Quit the App Store if it's open.
Now open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste:    ~/LIbrary/Caches/com.apple.appstore
Click Go then move the Cache.db file from the com.apple.appstore folder to the Trash.
Type or copy/paste:    ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Type or copy/paste:    ~/Library/Preferences
Click Go then move the com.apple.appstore.plist file from the Preferences folder to the Trash.
Try updating the My Alarm Clock app.

Alarm clock after 5800 update

Similar Messages

Maybe you are looking for