Alarm clock and vibration

Hello, i want to ask is it possible to add alarm clock bottom
where i can choose alarm with vibration or without vibration?

We are all fellow users on here and not Apple employees, and Apple does not take comments from these discussion communities.  If you want to be heard by Apple: http://www.apple.com/feedback

Similar Messages

  • My alarm clock and other apps no longer play any sound. My ringer stills works, so what is causing that?

    My alarm clock and other apps no longer play any sound. Ringer is still working and i can not find any settings that are turning off the sound. What could cause this?

    I know for a fact apple doesn't want carriers fixing their phones. My carrier even warned me that they can't fix the phones only apple stores can fix them. Well guess what I just wasted my whole day by driving to an apple store they "fixed" my phone I got home and it started doing the same **** things they didn't fix **** now I have to waste even more time by finding a ups store to ship my phone to apple so that means I'm going to be out of a phone for over a week because they never fixed it or replaced it like they should have. I'm so upset with apple that if this new phone does the same things were dropping apple and are going to samsung. I wasted 4 hours driving and $40 in gas and 6 hours of my time for nothing. Apple needs to put in more store around the country if their not going to let the carriers fix the phones them selves.

  • HT201394 Nothing works .... Minimum: fix alarm clock and Bring back the animation in the weather....

    Nothing works .... Minimum: fix alarm clock and Bring back the animation in the weather....

    before this (iOS 7xx) i have not problems with phone and software but now it disaster.....

  • ALarm clock and sleep behavior

    I am using Alarm Clock 2.3.8 with my G5, which wakes the computer up at a specified time and plays music to wake me up, but one issue I noticed on testing it. I have a password set to wake the computer from sleep and screen saver, and when the computer wakes up, if the password is not entered within about a minute, the computer goes back to sleep, which I know is a normal behavior, but in this application is kind of annoying. But also, when this happens, it effectively puts Alarm Clock in snooze mode so the G5 wakes back up a few minutes later and continues like this.
    Is there any way to change the sleep parameters so that it won't go back to sleep if the password is not entered on wake?
    G5 Dual 2 GHz and iBook G4 14-inch 1 GHz   Mac OS X (10.4.8)  

    LOL. You could buy an alarm clock.
    While waking to music may be nice, I find the alarm function of my Nokia phone to be the absolute best alarm clock I've ever used: it starts out at a low volume and then quickly escalates to an ear-splitting level that I find impossible to sleep through. It also has a snooze function, though the alarm is so effective that it wakes me from even the deepest sleep.
    Most cell phones have alarm features, so you may want to try that if you have a mobile and want to eschew an alarm clock.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Issues with Alarm Clock and Calendar Notifications

    I have noticed that when I am using the Alarm clock, it will not go off when the calendar is showing a meeting reminder....
    Is there any way to dis-activate this? My alarm clock will not work.. and there are too many appts in my calendar to go thru them to change...

    I also have the same issue. If the alarm is set and the calendar sends a notification just prior to the alarm time, the calendar notification prevents the alarm from going off. I understand it is a bug, but when will it be fixed? What is the bug ID? how do we track known bugs so we know they are being fixed? The problem is with the iPhone's included clock and calendar apps, so it is not a 3rd Party application issue, right? Thanks!

  • Ipod alarm clocks and similar accessories useless with protector case?

    I am frustrated.  My child bought an Ipod Touch 5th gen.  We spent the money buying a good protector case for it so it will actually last and then she received an alarm clock that will charge the Ipod when docked.  BUT, you have to take the Ipod out of the case to charge it.  So it makes the alarm clock accessory useless.  Plus, I found an adaptor so that it could be plugged in, it fits, but aparently it is not "certified" and won't charge (it seems to fit fine!! but is being blocked?).  I have looked at every docking aparatus out there and none work with a proper protector case and any good case does not come off quickly or easily to dock.  Nor would you want it to as its tough for the case to do its job if it is not on the ipod.
    Anyone found any work arounds that I can't find?  Why doesn't Apple make a dock extender?  Why do they block after market extenders?
    I don't know any adults let alone children that keep their ipods/iphones etc out of a protector case so why bother making accessories that can't be utilized?
    For such a large company with such a market share, why hasn't this problem been solved?  (OK maybe it has been solved and I am just unaware.  If so I take back most of the negative things I am thinking.  Someone please tell me I'm wrong!)
    If there isn't a solution out there, are there any other brands of tablets etc out there that are more durable and functional with accessories than the i-products?  We have more people in our household that will utilize a tablet of some sort in the near future.

    The previous discussion cites/provides link to a certified Lightning extender
    https://discussions.apple.com/thread/5456395

  • E63 Alarm Clock and Date problem

    Power off E63, when alarm clock ring, power on. The system date change.This problem happen almost every Sat. and Mon.. FW version 102.21.001

    in my opinion this is a media cache issue.
    activate Mass Storage mode and connect your device to your PC.
    using the Explorer of the PC, view the Storm's two harddrives and especially the hidden files. You should see a file named BBThumbs.dat in every folder that contains a media file. Delete all those BBThumbs.dat files.
    those files are media cache, and they may sometimes get corrupt. Deleting them will force the Media Manager to recreate the cache entirely.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Alarm clock and Reminder

    Is there any alterative for the alarm clock app coz it doesn't seem to have a proper snooze option and also the reminder app of the new ios is difficult to use, so can anyone suggest me alternatives for both the aps ??

    "What is the advantage of having this new email account?"
    It is simply an extra email if you wish to use it. You don't have to.
    "Also, the iPad is considered superior to other tablets because of the wealth of apps available (140,000). Isn't that a little hyped?"
    No. It is actually +600,000 apps.
    The 140,000 is iPad specific apps. You can also run iPhone apps and universal apps just fine.
    Sure there are lots of duplicates and a bunch of apps are lame but there are definitely plenty of very good quality apps.

  • Alarm clock and calendar event failed when we entered 1 Jan 2011 today!

    This morning my alarm clock didn't work and the iphone just didn't recognise that an alarm was set. And the event alarm set for today in the calendar didn't work either. Obviously there are buds that paralyse these functions when we entered into 2011. Anybody knows how to fix it?

    There's no fix as it's a bug. The only work around is to either set repeating alarms only.
    Supposedly the problem will go away on it's own on the 3rd.
    http://www.9to5mac.com/45310/new-years-2011-breaks-non-recurring-iphone-alarm-cl ocks

  • 5G Oddities - Alarm clock and audiobooks

    My 5G ipod is a wonderful toy but I've noticed a couple of oddities that I wonder if anyone else has experienced. They both relate to switching away from video playback - i.e. I had been watching a video on the ipod before ...
    In both cases the iPod is sat in a powered dock.
    1) When watching video & using the sleep timer to turn it off (falling asleep infront of a very small TV) the alarm clock doesn't seem to sound the next morning. When I fall asleep to music it works fine.
    2) When navigating away from a video to an audiobook (through the audiobook menu - though not if chosen as a "song" or "album") the audiobook plays back like an old 45 set on 33.
    (for you "youngsters" who have never played with vinyl records that means "slowly" ).
    Can anyone else reproduce this?
    iBook G4, Powerbook G4   Mac OS X (10.4.3)  

    Thanks, I had searched for the alarm clock issue but only remembered the audiobook one as I was writing it. Unsurprisingly that's the workaround I came up with.
    My guess would be that the same problem is affecting the alarm clock operation
    so when they fix one they'll probably fix both. In the meantime I should probably just stop falling asleep to video if I want to get woken up by my iPod.
    Thanks again.

  • Alarm clock and snooze option

    Hi,
    With my old phone (a 6280) i was able to change the amount of time the snooze option would turn the alarm off for.
    with my n95 i cant find the option to change it. and the default is 5 minutes. which is **bleep**.
    can it be changed on this phone or am i stuck with it?
    Thanks

    I think Time Machine is the cheapest - I think I paid US$5 .. which is practically free given current exchange rates
    Reasonably good product, too.

  • Problem With Alarm Clock and Ringtones

    Two nights ago i set my alarm for 5:00am on my Blackberry Storm2.  The next morning the alarm did not go off.  When i checked the phone i tested the ringtone associated with the alarm and it came back with an error message that said the phone could not find the ring tone.  I then noticed that all ring tones did not work, my phone did not ring when called, the phone also did not make any alert sounds.  I tried several different ring tones and I received all the same messages. 
    I did a battery pull on my phone and that seemed to fix all the issues so I did not thing anything of it.  I tried it again this morning and the same thing.  I did not do the battery pull this morning as I was going to leave the errors on the phone to bring back to Verizon.  I even tried calling the phone this morning and it would not ring or sound any alerts.  All of a suddent about 3 hours later my phone starting ringing from a phone call and alll the ring tones started working
    I have not added any ring tones to my phone all of these ring tones are the factory installed ones.  Both nights I have the phone on my dresser face down and not attached to any charging wires.  I did add music to my media card 2 days ago using the ITunes Snyc but have not created any ring tones at all.
    Would anyone know what is causing this issue?
    Would anyone have any idea what would be causing this.

    in my opinion this is a media cache issue.
    activate Mass Storage mode and connect your device to your PC.
    using the Explorer of the PC, view the Storm's two harddrives and especially the hidden files. You should see a file named BBThumbs.dat in every folder that contains a media file. Delete all those BBThumbs.dat files.
    those files are media cache, and they may sometimes get corrupt. Deleting them will force the Media Manager to recreate the cache entirely.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • IPhone alarm clock via speakers

    Hey,
    I wanted to ask if the sound of my iPhone alarm clock is transmitted to speakers while it's connected with the Apple Universal Dock. I tried it with a 3.5mm wire but no sound was transmitted.
    Does anybody have some experience with the iPhone alarm clock and speakers?
    Thank you very much
    Philipp

    you should get a Kicker and download the kicker kickstart app great sound loud sound and an alarm

  • Re:"Alarm Clock" message

    hi,
    I got the similiar problem as mentioned in "Alarm Clock" message.
    Can anyone be so kind tell me how it comes and how to deal with it?
    Thanks,
    char
    i m writing a program using kstat library for
    monitoring purpose.
    when i run the program it runs perfectly but after
    some time it prints
    "Alarm Clock"
    and ends.
    The program doesnt crash or throw any exception.
    It is a java program which uses jni to load a C++
    library written by me which uses the kstat for
    monitoring.
    I hope the message is from the system.
    Because i m not printing it anywhere in my program.
    It is a threaded program which uses pthread library in
    C++ layer.
    can anyone tell me what could be the reason.
    mohan

    hi
    this is a kind of signal from the system. One way is to mask it using signal handling and then you won't get it. You will get it in applications which are heavly multithreaded and/or running like a server.
    I used to mask it like this
    signal(SIGALRM, alarmClockSigHandler);
    Where in the method alarmClockSigHandler, I simply print out a message.
    It is declared in signal_iso.h in /usr/include/sys/iso directory.
    Riaz
    hi,
    I got the similiar problem as mentioned in "Alarm
    Clock" message.
    Can anyone be so kind tell me how it comes and how to
    deal with it?
    Thanks,
    char
    i m writing a program using kstat library for
    monitoring purpose.
    when i run the program it runs perfectly but after
    some time it prints
    "Alarm Clock"
    and ends.
    The program doesnt crash or throw any exception.
    It is a java program which uses jni to load a C++
    library written by me which uses the kstat for
    monitoring.
    I hope the message is from the system.
    Because i m not printing it anywhere in my program.
    It is a threaded program which uses pthread libraryin
    C++ layer.
    can anyone tell me what could be the reason.
    mohan

Maybe you are looking for

  • How do you sync your old library to a new laptop?

    Hi, Im currently using a new laptop and wanted to know how can I sync the library I had in the previous one to the new one. When I connect the ipod to the new one, I get a message that says that my Ipod is connected to a different library or somethin

  • Setting Page Title Dynamically in OAF

    Hello All, I have a Requirement wherein i have to display a 'Welcome <UserName>' message at the top of a OAF page. I want to implement this using the 'Title' propery of the Page. Is there any way to set the Title of a Page Programatically(by checking

  • How Do I Revert Back to The Old Version?

    Dead tired last night I automatically clicked "Install" when I saw the Safari download in updates thinking it was just the usual security fix, etc. Later when I launched Safari to get on the net I was horrified to see a whole new interface! As the ow

  • I'm sick of it all (MOD HELP ME)

    I'm not the account holder, my mum is but she don't use internet as she is blind. She as phoned up a few times about the fact we don't get the speed we can get. We are only getting about 3.80mb when on BT website it says we can get 5.5MB. We have pho

  • Adobe Photoshop Starter Edition 3.0 - problem opening My Catalog

    Have installed and uninstalled Adobe Starter Edition 3 numerous times. Each time I get the following message: There was a problem opening the catalog 'My Catalog' Another user or application may have the catalogue open, or one or more files may be mi