Alarm Clock going Crazy after updating 3GS

After updating to iOS 4.1 on my 3GS when I set the alarm clock for 7am it goes off at 6am.
How can I get my phone's alarm to go off at the time a set it to, instead of an hour earlier?

I have the same problem, and so did everyone at uni I asked this week, but it seems to only be the alarms that are set to repeat each week, if you set a "one off" alarm it goes off at the right time which makes it more confusing. Must have something to do with daylight savings and the fact the government keeps making it start earlier and earlier each year.

Similar Messages

Help....Mail goes crazy after update when using exchange account

Since I updated to 10.5.5 my exchange account goes haywire regularly. I was able to get it back up the last time it happened by moving to a IP address for my outgoing server, but this time nothing is working. Any suggestions????

Sry for beeing a bit unclear, still early in the morning :P
I´d try this:
go to ~/Library/Prefrence/ delete "com.apple.mail.plist", log out and back in again, launch Mail
Still dont work?
Go to Mail Prefrences/Accounts/ delete your account and set it up again

Anyone having trouble with the snooze function for the alarm? ...after update.

I've been using my phone as an alarm clock lately and after the latest firmware update I can't get the snooze to work on the alarm. The alarm goes off like it should and I select "snooze" with the ring but the alarm never goes off again. I was almost late to work the first time it did it.
Just checking to see if anyone else has experienced this. I have to say, I am not impressed with the latest "update" at all and have spent WAY too much time trying to get things to work again. If it wasn't a company issued phone I would've dropped the service long ago (no service at my desk at work or at home).

Try going into settings, apps and then manage apps. At the top scroll over and make sure all is selected. Scroll down and find the alarm app and tap on it. If clear data is populated then tap on it. After that tap on force close...you will get a warning but just press ok. If clear data is grayed out at least try force stop. Set your alarm back up and see if that works.

WRT54G3G: Going crazy after a day

Hello,
my WRT54G3G is going crazy after about a day. Ping times to it vary from 1ms to 30s with lots of packet losses. With kismet and wireshark I found that the device invents clients (only Cisco clients! ) and sends them "IEEE 802.11 Null function (No data)" frames. What's going on?
IEEE 802.11 Null function (No data), Flags: ....R.FT I could provide the wireshark dump, if needed.
Thanks,
Markus

Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...It should resolve the problem.

1661 Alarm Clock Goes Off Randomly

I often use my 1661 as a backup alarm clock. I set the alarm to go off at a given time, with the setting "alarm once" (i.e. no repeat.) My problem is that the alarm clock will go off randomly before the set time. For instance recently I set the alarm for 7:05 AM. The alarm went off at random times overnight, for instance 2:14 AM and 4:52 AM (not the exact times, just an estimate). The clock showed the correct time when it went off. Has anyone else experienced this? It's obviously quite a problem.

At another site, it was suggested to turn off the automatic synchronization.
I am trying it right now.
In the USA, given the extremely poor coverage of the T-Mobile network, it does make sense. Basically, the phone gets confused as to what time it is every time it loses updates from the network. The software says: "Hey, an alarm was set and I do not know what time it is... let me ring just in case... " and there goes your sleep!

Alarm Clock goes off 30 minutes later then expected in IOS 4.2 in Venezuela

The app worked OK under 3.1. This problem appeared in 4.0 but was solved in 4.1. The bug reappered in 4.2. Venezuela is -4:30 GMT. When I set up an alarm at 7:00 AM, it goes off at 7:30. There seems to be a problem with the time setting. I had the correct time in Miami. Then I flew to Caracas (Venezuela) and when the new service provider was recognized, it set the time 30 minutes behind. This was in IOS4 version 4.1 - when the alarm clock was working OK. I had to set the Region parameter in the International Option again to get the right time, even as the time setting is on Automatic Adjust.

Yes, I have tried that, many times. It is frustrating, because after googling about my problem, all I can find is numerous forum threads created by people having exactly the same problem as mine, but with the difference that all of them get their iPads to boot using the 2 button trick.
It does NOT work for me, no matter how I try it (iPad plugged in computer or wall, not plugged in, iTunes open, 10 seconds, 20 seconds, 30 seconds, etc).

How to restore safari icon and internet after updating 3gs to ios6.1

How do I restore internet function and Safari icon after updating iPhone 3gs to ios 6.1?

The Safari icon cannot be deleted. Go to Settings > General > Restrictions, verify you didn't turn it off.
Otherwise try Settings > General > Reset > Reset Home Screen Layout.

Netbeans 6.1 went crazy after updating

This is driving me crazy (too).
After updating Netbeans 6.1 went crazy and doesnt stop opening itself everytime I close it.
In other words "*Everytime I Exit Netbeans it opens itself again, then I close it and it opens itself again...*"
Anybody can help on that? (I dont know exactly where to ask about this).
Thanks

Just uninstall it, and do a clean install of 6.1

Alarm Clock Ringtone Changed after Upadting to iOS8

Hi there,
I have been having this problem and I wonder if anyone is also experiencing the same problem as well.
My alarm clock ringtone has been changed ever since I updated my iPhone 5s from iOS7 to iOS8. The ringtone is really short, which only lasts no more than 5 seconds.
In iOS7, it repeats itself for the alarm. However right now in iOS8, it only rings once, and only once, and that is it (which causes a problem for me to go to work because before it would repeat itself and now since it only rings once I also miss it. And I have been using this ringtone forever so I do not want to change).
So I am wondering if this is a bug, or if the features of the ringtone havebeen changed for iOS8?
Thanks for your answers and I really appreciate it.
Best regards.

My alarm continues to work exactly the same as it did under iOS 7. However, a few people seem to have had problems with alarms. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? You might also try deleting your alarms and redoing them.

MSI Z77A-GD65 going crazy after Windows 8/8.1 installation.

Hey so I decided to buy a new SSD and update my system to Windows 8.1 (coming from 7), mainly for optimal BF4 gaming experience, (I also intend buying a 290X lightning or two when they come out...) . But during the process I encountered a truckload of problems, my main one is this: I was using bios version 10.7 for almost a year, with a stable 4.8GHz OC (which I managed to get done after each bios flash since I built the rig in early 2012), everything went great - this was on Windows 7.
However when I migrated to Windows 8.1 my PC wouldn't boot anymore and after 5-6 attempts it did boot and it said that all my settings were reset to default, fine. I restarted and from then on it wouldn't boot anymore no matter what. The error code on the mobo is always "19" which in manual says it's Early South Bridge initialization. I have no ideea what to do anymore, I tried plugging out SSD, HDDs, GPUs, RAM sticks, clearing cmos with back panel button. It all boiled down to either not booting or going into a boot loop.
My only solution was to switch to bios B on the multi-bios switch which is running 10.2 an almost 2 years old bios. That beeing said I can boot normally now (and fast), and the system runs great but the bios version is so old that it does not let my 2x680 MSI Lightnings work in PCIE 3.0, only 2.0...
So i'm VERY scared of what to do next, because I don't want this second bios to corrupt as well.
I always flashed my bios with Live update 5, I did this with each new bios release and never had a problem but I read that the latest bios, 10.10 is buggy, and I don't know HOW to flash my bios to an earlier version, maybe even 10.7 or 10.8 in another way. Is there a way to safely flash BOTH bioses and to repair my A bios at the same time?
TL'DR, if there isn't any safe solution to my problem I might as well just press in OC Genie button and have a mild OC until sometimes next year when I'll get a new mb + cpu + ram anyway. But if there is one, please let me know.
Any imput is apreciated, THANKS!
full config:
CPU Model: Intel Core i7 3770K 3.5GHz| Corsair H100 push pull
Motherboard: MSI Z77A-GD65
Ram: 2x 4GB Kingston HyperX T1 Black Series DDR3 2133MHz CL11 Dual Channel Kit
Video Card: 2way SLI MSI GTX 680 Lightning 2GB DDR5 256-bit
Sound Card: Realtek ALC898
Storage: Corsair force GT 120 GB(OS) + 2x WD 1TB SATA-II 7200 RPM 32MB RE3 + WD 2TB SATA-III 7200RPM 64MB Caviar Black + WD 3TB SATA-III 64MB Caviar Green
Power Supply: Nexus RX-1.1K GOLD @ 1100W
Case: Cooler Master Storm Trooper + 8x Cooler Master SickleFlow 120 Red LED + Fan controller Scythe Kaze Master Pro black = negative pressure
Keyboard: Cooler Master Storm Trigger
Mouse: Cooler Master Storm Sentinel Advance II
CD/DVD: Asus DVD drive black
Monitor: Dell U2711 REVA07 IPS
Speakers: Logitech Z-5500
OS: Windows 8.1 Pro 64bit

I just found a post of mine (from another forum) from when the error 19 thing first started, this is what happend:
Quote
I decided to buy a new SSD and update my system to Windows 8.1 (coming from 7). And I encountered a truckload of problems, my main one is this: I was using bios version 10.7 for almost a year, with a nice 4.8GHz OC stable, everything went great - this was on Windows 7.
However when I migrated to Windows 8.1 my PC wouldn't boot anymore and after 5-6 attempts it did boot and it said that all my settings were reset to default, fine. I restarted and from then on it wouldn't boot anymore no matter what. The error code on the mobo is always "19" which in manual says it's Early South Bridge initialization. I have no ideea what to do anymore, I tried plugging out SSD, HDDs, GPUs, RAM sticks, clearing cmos with back panel button. It all bolied down to either not booting or going into a boot loop.
My only solution was to switch to bios B on the multi-bios switch which is running 10.2 that is almost 2 years old. That beeing said I can boot normally now, but the bios version is so old...
As you can see it had nothing to do with me doing a bad BIOS flash, actually not even the OC... isn't there perhaps a way to fix that A BIOS?

Clock is wrong after update

After the new update the clock is wrong..how do I reset the clock??.

Settings>General>Date and Time

Toshiba Satellite R15 - Help! Pen calibration goes crazy after hibernating and resuming the PC.

I have a Toshiba Satellite R15 laptop that I got off of ebay. This laptop is the kind with a flip-around screen so that you can use it in pen/tablet/stylus mode. When I got it, I installed a fresh copy of Windows XP SP3 on it, and installed all the necessary drivers from the Toshiba web site. Also I made sure to get the latest Wacom pen driver from the Wacom web site. Also, I got all the windows updates.
I can normally calibrate the display and the pen just fine using the Wacom tool in the windows control panel. I have the computer configured so that, when I flip the screen into tablet mode, the screen goes into a portrait-aspect configuration (tall instead of wide). This works fine and I can also calibrate the screen fine in this mode.
But if I hibernate and resume the machine (in "tablet" mode with the screen flipped around), after resume, everything has gone wonky with the pen. First of all, the pen moves as if the machine were in landscape mode still: An X motion of the pen produces a Y motion of the cursor, for example. If, then, I flip the screen back to regular-laptop mode, the X/Y direction is correct again, but, the calibration is way off, the cursor is two inches to the right of the pen. If I try to calibrate again when it's in this state, the pen is still off by two inches.
I did a google search, but, the only results I see are for people encountering this problem under Linux. I don't see any solutions for Windows XP users.
I emailed Wacom and they said to ask Toshiba. I can't email toshiba (no support email in their contact page), so I'm asking here. Can anyone help?

I ended up fixing this, by formatting the computer from scratch and installing Windows 7 instead of Windows XP. :-)
This works but there is a limitation: There are no updated Win7 video drivers from Intel for the Toshiba Sattellite R15. So you have to hack the XP drivers to work. Here are the instructions on how to hack the XP drivers to work on the Toshiba Satellite R15 running Windows 7:
http://www.groundstate.net/855GMWin7.html
But after that, everything is fine on the tablet.

Fan going crazy after I just got optical drive repaired

Well my fan now sounds like a loud air conditioner or something after getting it fixed at a mac store. Just got it back today because I had to replace my optical drive. I'm assuming it's not dust since it just started, and I do have an appointment set up for it to be looked at but I was hoping to get some comments from you guys.
My computer's fans have never been this loud. And it won't go away either. They start up right when I start the computer up. I could leave it for 5 minutes without doing anything on it and they would still sound like a jet engine or something. Makes me afraid that my comp is going to fry itself or something.
Idk but I think the store must have messed up on something to make it do this. I have heard the fans before but this is crazy.

OFQ wrote:
Well my fan now sounds like a loud air conditioner or something after getting it fixed at a mac store. Just got it back today because I had to replace my optical drive.
hmm ... i wonder if your issue might be related to the experience another user had in this thread: http://discussions.apple.com/thread.jspa?threadID=2434866&tstart=0.
JGG

No SMS send or receive ability after updating 3GS to ios5

Synced up my husband's iPhone 3Gs this past Sunday night for the first time ever to update it from ios 4.1 to ios 5. Since then, he has been unable to send or receive ANY text messages. I tried a backup and restore last night and was able to get ONE imessage to go through to my own phone, but that's it. During the process Sunday night, he also signed up for a new iTunes account (we usually use the same one). Would this have anything to do with it? I've tried restoring Network Settings. Any help would be much appreciated.

Hi.
So he can't send regular Pay-Text or iMessage ? Or is it only iMessage that wont do ?
With his new Apple ID, make sure to activate it under the iMessage settings and to enter his phone number.
Remember that only other iPhones with iMessage acvitated will receive texts as iMessage.
If there's still a problem, try to turn off the iPhone and back on.
Hope this was helpful.

Going crazy after upgrading to ios 8.0.2.

Please tell me if need to adjust my settings or what? Since upgrading to IOS 8.0.2, my iPad prioritizes my cellular service over WiFi service. I have to physically turn off cellular service before the iPad will even recognize a WiFi connection. Then I have to reboot the iPad to get the WiFi to work. I have to do this every time I move the iPad to a new location. The WiFi will work for a little bit after I reboot, then the iPad freezes up completely, or I lose my Internet connection, or both. So I have to reboot the iPad again. Meanwhile, my battery is draining at an alarming rate. I used to be able to go 10 hours before recharging. Now it will only last a couple of hours. I have had to reboot my iPad 5 times today. Can somebody please tell me if you have similar issues, or if I have a setting wrong somewhere, or what? I was completely happy with my IOS 7 version. Can I go back to it?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Alarm Clock going Crazy after updating 3GS

Similar Messages

Maybe you are looking for