Alarm clock problem after Sync with N73
I have a problem with the alarm clock in my N73 (RM-133). From the moment on I had my phone synchronized with Outlook via Nokia PC Suite, the alarm clock fails to start the phone from power-off state - it switches on, and then the software crashes. A working alarm clock can only be restored by formatting the phone with *#7370# and therefore losing all settings and data.
Another thing that can be seen is that, after a Sync, if I set the alarm clock, turn off the phone, immediately turn it on again, the alarm clock is still set to its time, but the alarm symbol (the little bell) is no longer displayed.
I have absolutely no idea what the reason may be. It can not be incompatible installed apps, as the problem also occurs after a total reset without changing any setting in the phone. I have already once changed my hardware on warranty. I am always using the latest (unbranded original Nokia) FW available, same goes for PC Suite. Any ideas?
Oj, just relax and buy another phone, that's exactly what Nokia wants! I did so after 3 times sending back my N73 for various defects (keys, display, camera), then took a E65 for 2 years (which is far better, but not perfect, worked after 1 time exchange with a faulty SIM card reader), now I have a N82 which I had to exchange 6 (six) times for not having several stuck keys, scratches on the display, dust inside the display. This N82 now "only" makes strange noises when pressing keys like double-sided adhesive tape not properly fixed. Nokia knows about that problem (asked today in a shop). They fix it, but can't guarantee it getting better.
So... just sit back, relax, and throw all your expectations about quality from Nokia over board, learn how to be happy for getting some (mostly useless) answer from the support at all, and never think you could get a masterpiece of a working phone from Nokia if you pay them 'only' 400 bucks.
Similar Messages
-
Apply problem after sync with incremental backup
Hello all,
I have primary as rac with 4 nodes and one physical (all have asm)
I made incremental backup to re-sync my primary with physical standby and when i tried to start DG process the shiping is working but apply not workin : check please :
THREAD#,Last Standby Seq Received
1,29598
2,22308
3,27230
4,21868
THREAD#,Last Standby Seq Applied
1,28634
2,21227
3,25780
4,21104
when i run apply command i see in alert log file this :
Media Recovery Waiting for thread 4 sequence 1
Fetching gap sequence in thread 4, gap sequence 1-100
Tue Apr 07 12:06:49 2015
FAL[client]: Failed to request gap sequence
GAP - thread 4 sequence 1-100
DBID 1722434320 branch 849356882
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that's sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
the system searching for gab started with seq 1 in node 4 !!!!
how can i deal with that please ??Thanks Stefan , kindly find below the output for both primary and standby :
1- select NAME,RESETLOGS_CHANGE#, CHECKPOINT_CHANGE#,CONTROLFILE_CHANGE#,CURRENT_SCN,RECOVERY_TARGET_INCARNATION# from v$database
Primary :
ORACLE,925702,3231069178,3231935937,3231937322,2
Standby :
ORACLE,925702,3096376393,3096507373,3096507372,2
2- list incarnation
Primary :
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ORACLE 1722434320 PARENT 1 24-AUG-13
2 2 ORACLE 1722434320 CURRENT 925702 04-JUN-14
Standby:
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ORACLE 1722434320 PARENT 1 24-AUG-13
2 2 ORACLE 1722434320 CURRENT 925702 04-JUN-14
3- select FILE#,RESETLOGS_CHANGE#,RESETLOGS_TIME, CHECKPOINT_CHANGE#,CHECKPOINT_TIME from v$datafile_header;
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
1 925702 04-JUN-14 3231779881 08-APR-15
2 925702 04-JUN-14 3231779881 08-APR-15
3 925702 04-JUN-14 3231779881 08-APR-15
4 925702 04-JUN-14 3231779881 08-APR-15
5 925702 04-JUN-14 3231779881 08-APR-15
6 925702 04-JUN-14 3231779881 08-APR-15
7 925702 04-JUN-14 3231779881 08-APR-15
8 925702 04-JUN-14 3231779881 08-APR-15
9 925702 04-JUN-14 3231779881 08-APR-15
10 925702 04-JUN-14 3231779881 08-APR-15
11 925702 04-JUN-14 3231779881 08-APR-15
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
12 925702 04-JUN-14 3231779881 08-APR-15
13 925702 04-JUN-14 3231779881 08-APR-15
14 925702 04-JUN-14 3231779881 08-APR-15
15 925702 04-JUN-14 3231779881 08-APR-15
16 925702 04-JUN-14 3231779881 08-APR-15
17 925702 04-JUN-14 3231779881 08-APR-15
18 925702 04-JUN-14 3231779881 08-APR-15
19 925702 04-JUN-14 3231779881 08-APR-15
20 925702 04-JUN-14 3231779881 08-APR-15
21 925702 04-JUN-14 3231779881 08-APR-15
22 925702 04-JUN-14 3231779881 08-APR-15
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
23 925702 04-JUN-14 3231779881 08-APR-15
24 925702 04-JUN-14 3231779881 08-APR-15
25 925702 04-JUN-14 3231779881 08-APR-15
26 925702 04-JUN-14 3231779881 08-APR-15
27 925702 04-JUN-14 3231779881 08-APR-15
28 925702 04-JUN-14 3231779881 08-APR-15
29 925702 04-JUN-14 3231779881 08-APR-15
29 rows selected.
Standby:
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
1 925702 04-JUN-14 3065328471 25-MAR-15
2 925702 04-JUN-14 3065328464 25-MAR-15
3 925702 04-JUN-14 3065328464 25-MAR-15
4 925702 04-JUN-14 3065328461 25-MAR-15
5 925702 04-JUN-14 3065328471 25-MAR-15
6 925702 04-JUN-14 3065328471 25-MAR-15
7 925702 04-JUN-14 3065328461 25-MAR-15
8 925702 04-JUN-14 3065328471 25-MAR-15
9 925702 04-JUN-14 1016743 04-JUN-14
10 925702 04-JUN-14 1020278 04-JUN-14
11 925702 04-JUN-14 1020681 04-JUN-14
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
12 925702 04-JUN-14 1021083 04-JUN-14
13 925702 04-JUN-14 1021086 04-JUN-14
14 925702 04-JUN-14 1021877 04-JUN-14
15 925702 04-JUN-14 1021880 04-JUN-14
16 925702 04-JUN-14 1021883 04-JUN-14
17 925702 04-JUN-14 1021886 04-JUN-14
18 925702 04-JUN-14 1031089 04-JUN-14
19 925702 04-JUN-14 1031555 04-JUN-14
20 925702 04-JUN-14 1032064 04-JUN-14
21 925702 04-JUN-14 1032525 04-JUN-14
22 925702 04-JUN-14 1032922 04-JUN-14
FILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN
23 925702 04-JUN-14 1033338 04-JUN-14
24 925702 04-JUN-14 1033731 04-JUN-14
25 925702 04-JUN-14 1034126 04-JUN-14
26 925702 04-JUN-14 90283375 09-JUL-14
27 925702 04-JUN-14 90291448 09-JUL-14
28 925702 04-JUN-14 3065328471 25-MAR-15
29 925702 04-JUN-14 3065328461 25-MAR-15
29 rows selected.
4- select name,CHECKPOINT_CHANGE#,CHECKPOINT_TIME, UNRECOVERABLE_CHANGE# ,UNRECOVERABLE_TIME from v$datafile
Prmairy :
NAME
CHECKPOINT_CHANGE#
CHECKPOINT_TIME
UNRECOVERABLE_CHANGE#
UNRECOVERABLE_TIME
+ASM_ORADATA/oracle/datafile/system.274.849356797
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/sysaux.260.849356797
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/undotbs1.263.849356799
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/users.269.849356799
3232100160
04/08/2015 10:07:12
404,796,458
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/example.272.849356895
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/undotbs2.262.849357043
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/undotbs3.261.849357043
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/undotbs4.267.849357045
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/asd01.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/dev01.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/feed01.dbf
3232100160
04/08/2015 10:07:12
404,790,786
08/25/2014 22:36:42
+ASM_ORADATA/oracle/datafile/indx01.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/indx02.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/website01.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/website02.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/website03.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/website04.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/users01.dbf
3232100160
04/08/2015 10:07:12
404,796,505
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users02.dbf
3232100160
04/08/2015 10:07:12
404,796,502
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users03.dbf
3232100160
04/08/2015 10:07:12
404,796,499
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users04.dbf
3232100160
04/08/2015 10:07:12
404,796,496
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users05.dbf
3232100160
04/08/2015 10:07:12
404,796,493
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users06.dbf
3232100160
04/08/2015 10:07:12
404,796,490
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users07.dbf
3232100160
04/08/2015 10:07:12
404,796,487
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/users08.dbf
3232100160
04/08/2015 10:07:12
404,796,505
08/25/2014 22:36:50
+ASM_ORADATA/oracle/datafile/feed02.dbf
3232100160
04/08/2015 10:07:12
134,340,010
07/16/2014 22:06:21
+ASM_ORADATA/oracle/datafile/indx03.dbf
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/oracle/datafile/system_2_01
3232100160
04/08/2015 10:07:12
0
+ASM_ORADATA/catalog01
3232100160
04/08/2015 10:07:12
0
Standby :
NAME
CHECKPOINT_CHANGE#
CHECKPOINT_TIME
UNRECOVERABLE_CHANGE#
UNRECOVERABLE_TIME
+DATA/oracledrs/datafile/system.3248.875795981
3096432813
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/sysaux.3244.875796111
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/undotbs1.3249.875796547
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/users.3255.875796621
3096432811
03/30/2015 07:55:20
404,796,458
08/25/2014 22:36:50
+DATA/oracledrs/datafile/example.3258.875796817
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/undotbs2.3256.875796823
3096432813
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/undotbs3.3253.875796869
3096432811
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/undotbs4.3247.875797223
3096432813
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/asd01.dbf
3096432813
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/dev01.dbf
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/feed01.dbf
3096432813
03/30/2015 07:55:21
404,790,786
08/25/2014 22:36:42
+DATA/oracledrs/datafile/indx01.dbf
3096432803
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/indx02.dbf
3096432803
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/website01.dbf
3096432813
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/website02.dbf
3096432811
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/website03.dbf
3096432811
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/website04.dbf
3096432811
03/30/2015 07:55:20
0
+DATA/oracledrs/datafile/users01.dbf
3096432811
03/30/2015 07:55:20
404,796,505
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users02.dbf
3096432803
03/30/2015 07:55:20
404,796,502
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users03.dbf
3096432803
03/30/2015 07:55:20
404,796,499
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users04.dbf
3096432814
03/30/2015 07:55:21
404,796,496
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users05.dbf
3096432813
03/30/2015 07:55:21
404,796,493
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users06.dbf
3096432803
03/30/2015 07:55:20
404,796,490
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users07.dbf
3096432811
03/30/2015 07:55:20
404,796,487
08/25/2014 22:36:50
+DATA/oracledrs/datafile/users08.dbf
3096432814
03/30/2015 07:55:21
404,796,505
08/25/2014 22:36:50
+DATA/oracledrs/datafile/feed02.dbf
3096432813
03/30/2015 07:55:21
134,340,010
07/16/2014 22:06:21
+DATA/oracledrs/datafile/indx03.dbf
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/system_2_01
3096432814
03/30/2015 07:55:21
0
+DATA/oracledrs/datafile/catalog.288.873258217
3096432811
03/30/2015 07:55:20
0
Thanks in advance, -
Problem after sync with database in EO
Hi,
I had an entity object called say employeeEO which is used to create employeeVO and this view object was dropped into the pagefragment as ADF form.
I then added a new column to the table and sync this column to the entity object and added this attribute to the view object and added list of values for the new attribute and dropped to page as select one choice. Now when i tried creating a new row by clicking on create insert and entering the values and commititng the data the fields get automatically reset and it does not throw any validation error .
The value is not saved in the data base.
Any reason for this to happen .
Note: The project had gone through migration from 11.1.2.1 to 11.1.2.2
When i tried to commit in the application module it works fine only in the task flow it does not work
Edited: When when i drop the new attribute as a input field on the page it gets reseted . the value is sent to the view object i guess but when i give a default value in the view object, it takes the default value and saves the value gets saved in the database.
Except for the new attribute the everything else was built in 11.1.2.1
Only the values that are passed from the screen does not work :(
Thanks,
Sam
Edited by: Sam47 on 21-Nov-2012 23:37Now when i tried creating a new row by clicking on create insert and entering the values and commititng the data the fields get automatically reset What code do you use for this ?
-
Songs purchased on iPhone through iTunes Store will not show up on iPhone after syncing with iTunes
I recently purchased iTunes Match (about a month ago). Since purchasing Match, any songs that I have bought on my iPhone 4S (32GB, Sprint) through the iTunes Store app will not sync back to my iPhone after syncing with iTunes on my computer. I have iOS 7.1.2 and iTunes 11.3.0.54. The only way I can get them to show back up in my iPhone music library so I can play them is by re-downloading the songs through the iTunes Store app. Which is super annoying because now it is about 10 songs that keep doing this, and they are in multiple playlists. Is anyone else having this problem and have you found any fixes? Really regretting purchasing the iTunes Match (which is not enabled on my iPhone, just on my computer).
How to create custom ringtones ...
1. Open iTunes.
2. Find the song that you want to make into a ringtone.
3. Listen to the song and find the part of it you want to use. The chorus may be a good place to start.
4. Write down the start and stop times of the clip.
5. Right-click the song and select "Get Info."
6. Click the "Options" tab.
7. Type in the start time of your ringtone in the text box next to "Start Time" in the minutes:seconds (i.e., 2:01) format.
8. Type in the end time of your ringtone in the text box next to "Stop Time." Make sure the ringtone is no more than 30 seconds long.
9. Click "OK."
10. Right-click your song again and select "Convert Selection to AAC." Wait for iTunes to convert your song. It will create a duplicate version.
11. Right-click the ringtone and select "Delete."
12. Click on the "Keep Files" button.
13. Find the file. It's usually in your User folder under "Music > iTunes > iTunes Music" and under the band's name. It will have an extension of m4a.
14. Replace the m4a extension of your ringtone with m4r. You can either double-click slowly to rename your file, or right-click and select "Get Info" on a Mac or "Rename" on a Windows PC.
15. Click "Use .m4r" or the PC equivalent when the system warns you that the change may affect the use of your file.
16. Double-click the ringtone file. ITunes will automatically add it to your ringtones folder in your iTunes Music Library.
17. Connect your iPhone and sync your ringtones.
Oh, also to change a file extension. (not sure on Mac), but in Windows you need to go to "control panel" select "folder options". You need to uncheck the box "hide file extension for known file types". This will allow you to view and change the files extensions.
Hope this is useful ... -
Missing a calendar in iCal after syncing with MobileMe....
i am having some problems with iCal ...i am missing one my Calendars in iCal and wasn't sure how to get it back. I downloaded the calendars file and calendar.plist from my Time Machine backup...the missing calendar showed up at first, but it seemed to disappear right away (i assume after syncing with MobileMe.) Not sure what would be the easiest way to bring it back.......
It's possible to restore from Time Machine, though it's a slightly complicated process. Please follow very carefully the steps described here:
http://www.wilmut.webspace.virginmedia.com/notes/timemachine.html -
My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?
Connect your phone to iTunes, then right-click on the name of your phone on the left sidebar and select Reset Warnings. Then sync again and you should get a warning listing the problem files.
-
I cannot eject my new ipod classic after sync with i-tunes on my pc due, it states, to open files being used by another application. What does this mean? How can I get my ipod to eject?
If it's a one-time "glitch," you can try restarting your computer with the iPod still connected. Try ejecting again after the restart.
If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage. When connected, the iPod's "disk" is like other mounted volumes. This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk. -
Has anyone had issues with their music volume after syncing with iCloud ?
There have been several posts here and on the iphone site about this.
The jury is still out what the fix will be. Some posts say it's a problem with the metadata and the orientation data contained there-in. I can not confirm that.
I do know that when I take a landscape screen snap, the orientation is wrong when I email or upload the photo to my computer. -
Home video not appearing in Videos/Movies after syncing with first generation iPad.
Why is my home video in Shared Libraries but not Movies after syncing with first generation iPad? It appears in Movies on iPad2 and iPad3. I've already changed Media Kind to "Movie." I didn't have this problem 1 month ago when syncing a new video. Is there a software update issue? iPad says software is up-to-date.
The video app has 4 tabs across the top. If they are not hiding in one of the tabs, i suspect they are missing the type identifier and the app doesnt know where to show them. Glas that at least you can find them.
Next time you sync, take a look in i tunes, and see if they are fully labeled there. I would not be surprised if one the i tunes fields is the key for the pad video app to know which tab to put the, under. -
Outlook 2007 calendar events font changes after syncing with iTunes
I use Outlook 2007 on a Windows XP PC. I have no problems syncing Outlook calendar events with my iPhone 4 other than for one highly annoying detail. My default font in Outlook is set to Times New Roman 12 pt. Whenever I sync, all of my calendar events' text in Outlook is changed from Times New Roman 12 pt. to Calibri 11 pt., and sometimes more recently, to Arial 10 pt.
It's driving me nuts as I find Calibri to be hideous-looking. In addition to the font change, all other special formatting such as bold and italics are removed.
Has anyone experienced this before or know what's going on? Many thanks in advance to anyone who can help.Has no one experienced this issue? I can't understand why this happening. It's been almost two months since I posted this.
To reiterate: After syncing with iTunes (the newest version), all custom text formatting in Outlook 2007 calendar events are changed to Calibri 11 point, and sometimes more recently, to Arial 10 point. My default font is set to Times New Roman 12 point.
Any help would be greatly appreciated. -
After syncing with iTunes, Apple Mobile Device Support uses 83-99% of CPU
After syncing with iTunes 10.4.0.80, everything becomes very slow on my XP Home PC with 2G RAM. Apple Mobile Device is reported as using 83-99% of the CPU cycles. Shutting down and restarting Apple Mobile Device solves the problem and reduces CPU cycles to 0%. (I have written a small batch program to stop and restart the Apple Mobile Device to achieve this.) Does anyone have any thoughts about why the Apple Mobile Device process won't release when the sync is finished?
i deleted itunes and mobile support and now when i reinstall itunes the mobile support does not come back with it as when it tries to install that it just says rolling back after it is almost done
The AMDS install roll-back (on XP) can be caused by old driver componentry "stuck" in the bowels of your OS. If that's what is going on, we can get past this ... but I'm afraid it's a bit of a performance.
First, go into "My Computer". Go "Tools > Folder Options". Go to the view tab.
Make sure "Show hidden files and folders" is selected.
Make sure "Hide extensions for known filetypes" is unchecked.
Make sure "Hide protected operating system files (Recommended)" is unchecked.
Click OK.
Now in "My Computer", open "Local Disk C:" or whichever drive your Operating System is installed on.
Open the "Windows" folder.
Open the "system32" folder.
Open the "DRVSTORE" folder.
In there look to see if you have either of the following two folders:
netaapl_(LongStringOfNumbers)
usbaapl_(LongStringOfNumbers)
If you find either of them, drag them out onto the desktop. (Don't touch any other files or folders you see in there.)
Now go back into the "system32" directory.
Open the "Drivers" directory.
Look for either of the following two files:
netaapl.sys
usbaapl.sys
If you see either of them in there, drag them out onto the desktop. (Again, don't touch any other files or folders you see in there.)
Now restart the PC. Uninstall iTunes again, and then try reinstalling it again. Does Apple Mobile Device Support install this time? -
HT1386 how to delete photos from iphone after syncing with itunes
is there anyway to automatically setup itunes or my iphone to delete my photos from iphone after syncing with itunes?
Thank you! Syncing has always scared me...basically I am just afraid to lose any photos. But it worked. Again thank you
-
Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhoneOn the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
Events not showing in iCal after sync with iPhone
A whole week of appointments don't show up in iCal after syncing with my iPhone - all the appointments are on my iPhone but they won't copy over.
Funnily enough, the week that is not showing up is changing every Monday...
Anyone seen this before?I found this solution in another discussion. It's from this website: http://iphonewriter.blogspot.co.nz/2008/05/how-to-fixing-ical-iphone-sync-issues .html)
"You'll know the syncing issue when you see it, because the new events you enter into the Calendar on your Apple iPhone will not appear in iCal. Said another way, you'll enter a new event into your iPhone, use iTunes to sync with your Mac (or MacBook in our case) and the new event on your iPhone will not show up in iCal. Keep trying, synch as you might, iCal and the Apple iPhone just won't get along.
Here's the down and dirty fix:
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Restore your calendar. When prompted, use your notes from Step #1 to select the file your created earlier.
At this point all my appointments were showing up properly in iCal, and did not disappear after syncing again with the iPhone. -
Music files missing after sync with iTunes
All of my devices are updated to the last version.
I created playlists to manage syncing music from iTunes to iPhone.
Sometimes my music files would be missing on my iPhone 6 running iOS 8.1 after sync with iTunes 12.0.1.26.
When music missing, they look OK in iOS playlists, but will appear a "waiting for copy” symbol on the right side then jump to next song one by one when I try to play.
It's really weird because it happens randomly, I totally have no idea when it will happen again, more even far from why ...
Zen style APPLE !!It sometimes takes awhile for the info to download from itunes.
try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
Maybe you are looking for
-
Hotmail Email account not working on my Phone anymore
Hi. I have a Curve 8330 on the Sprint network. About a day and a half ago I stopped receiving my emails on my phone. I can't send email either. SMS, MMS, Blackberry messenger all work fine. My email account works fine if I log in through the bro
-
Cost Center Text in MB21/MB22/MB23 for movement Type '201' ?
Hello Experts, I have on issue in T-code MB21/MB22/MB23 . There is Cost center in these t-code, in standard setting cost center text appears but here only cost center text doesn't appears against that cost center . Please review that attached image t
-
I just purchased the MSI G4Ti4200-TP64, Model # MS-8886 from Fry's Electronics. I am having problems loading the driver on my computer. I have a SOYO SY-7VCA-E motherboard with VIA chipset VT82C694X, Pentium III 933 Mhz processor, and 512 Mb RAM.
-
Skype starts and closes after few seconds
Hi, Please help! My skype will open but after few seconds closes.. and I get the starting window of username and password... I aready changed my password, and it did not help. I ran DXdiang.exe, here is the file Please help Tomer Attachments: DxDiag.
-
Error installing Portal 3.0(ORA-00600)
I have installed OAS9i 1.0.2.2 Standard Edition on PC with Windows2000 Server and on other PC with Windows NT 4.0 Server. When I start to install Portal installation is returning an error message. "STEP 8 : Installing WWV layer Components INSTALL_ACT