Alarm clock with longer ring time
Hello,
When i'm using my alarm, i want to hear the ring for longer then 1 min.
Is there any program that can do it?
Thank you
Tomer
On iPad you can still do so. When you pick the alarm sound scroll all the way up and you should see "Pick a song". If you don't
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/
Similar Messages
-
Need help with long sync times - busy optimizing unchanged pictures
Before the latest update I was having a problem with long sync times, often with time spent optimizing pictures that hadn't changed since the last sync. This morning I did the latest update and now it's going on hours updating. Again, optimizing >8000 pics, none of which have changed since yesterday's sync.
Any suggestions as to what to do? Thanks.Yes I plug the IPOD into the USB port. Today it is a little worse. When I plug it in it will sync for a moment, pop the message that says IPOD IS SYNCED TO ANOTHER COMPUTER DO YOU WANT TO SYNC TO THIS COMPUTER. If I say yes it immediately says FILE NOT FOUND. The whole page locks up and I have to shut the computer down and restart.
Sometimes it just recgonizes the named of the IPOD then immediatel disconnets it. I am so frustrated with this POS and copy protection and all the other things Apple is doing to ensure there songs are not stolen. It is a PAIN and now this...149.00 gone down the tube. -
Has anyone else had problems with long wakeup times on Cinema displays?
We're having problems with long wakeup times on our Cinema Display. Noticed it after the Maverick update.
Need help please. This thing is nothing more than a boat anchor to my developers... frustrating, expensive boat anchor.
Thoughts?
Thanks,
Jeff StutzmanHey Jeff,
Thanks for the question. I understand you are experiencing issues with an external display and your MacBook Air. The following resource may provide a solution:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
While you should give all of the troubleshooting steps a whirl, definitely make sure to follow the steps in this section:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thanks,
Matt M. -
Wish a bigger led hd monitor and the battery with longer standby time
wish a bigger led hd monitor ,the battery with longer standby time and can be separated from cellphone , and less weight
Sounds like you want a bulkier phone that weighs less or maybe since you want an HD monitor, you want a laptop instead .
-
i have had my iphone 4s for less than 3 months and i always have it in a protective case, recently my bluetooth that i use daily will not stay connected, my alarm clock will not ring, any suggestions on whats going on??
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Xpressmusic 5130 with a alarm clock that will ring...
Currently, the alarm clock only allows me to set one time to ring. (Wake-up time)
I am wondering is there any app to replace this alarm clock or I can use
Carbide.ui Series 40 Theme Edition to change this property?
Thanks
Jack
Solved!
Go to Solution.You can use the reminder function in the calender instead. It will allow you to set multiple alarms for each day & you can set it to ring daily if required.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920 -
There is an annoying bug with the Nano alarm clock whereby it fails to ring, and I hope there is a fix for it.
I get this behaviour mostly by doing the following:
Set a recurring alarm to say 7
After midnight on the date of the alarm and before it is due to ring, change the alarm time to one hour earlier.
result is that the alarm fails to ring.
This is a 5th gen Nano. Any fixes out there?thx, but it has external speakers though it is hooked up to a Bose system overnight.
The alarm does work the mojority of the time, but in some situations (such as outlined above) does not -
ITunes Alarm Clock with Airplay
Up to a year ago, I had an alarm clock application which I got from the App Store that did a nice alarm clock playing one of my iTunes play list at a certain time in the morning.
Then I moved my computer from my bedroom to my office. So I can't hear the iMac from my bedroom. Ok, so I got a set of speakers that can be invoked using AirPlay from iTunes. As a manual operation it is exactly what I wanted. However, the alarm clock application has no option to set the Air Play option on iTunes. If I run iTunes and select my Air Play speakers, when the Alarm clock plays a Playlist, iTunes resets the output to the Computer. <Sigh>
A few months ago, I found a script that would set the Air Play output device and run a play list. I was set. However, I found no option to run this on a schedule. Since Mountain Lion, the option to run a script from a calendar event was removed. <double sigh>
Someone suggested Keyboard Maestro which looks like an excellant application for many things. However, at that point, Apple released iTunes 11 which I installed. Now I find that the scripts I found on the internet to select Air Play and a particular device via Apple Script no longer works with iTunes 11. <now I'm up to groan>
Playing around with Keyboard Maestro, I found a way to record a script within KM that will allow me to manipulate the U/I of iTunes with keystrokes and mouse clicks to do what I want. Problem solved??
NO. It turns out that the macro I defined in Keyboard Maestro works just fine EXCEPT that if the Screen Saver if running, KM cannot do U/I actions (this according to KM's author who has been very responsive to my requests for support). He is not sure there is any way to do it.
I'm experimenting to verify this statement by turning off the Energy saver options to turn off the CPU and display and not do Screen Saver. If that works then I have narrowed down my issue. I should know tommorrow (I did a test last night but forgot to display the Screen Saver and so it didn't accomplish what I wanted).
Does anyone know how I could solve the problem? Is there some kind of program I could run that would turn off the Screen Saver when run so the U/I is up and running again when the script I have would work?
Any other ideas?
Thanks,
BruceDid you ever find a solution? I have the same problem.
-
Alarm clock with Radio on 6230i
Hi,
Has anyone used the alarm clock function with the radio to wake you in the morning/evening..?
Is it possible to use the alarm to play the radio for 15 mins and turn it off say to go to sleep with. The kinda opposite of snooze.??
Gratful for any info..or 3rd party app maybe?
CrispyNo honest ...try it! :-)
I use it all the time as a morning wakeup alarm! I just wanted to know if it would do the opposite...can't find it yet but I'm sure it would..I suppose I will have to develop the app for it!
This phone has hidden depths and I don't think there is anyone that knows it fully yet... -
Problem with long response time when looking at queues!
Hello,
I have a problem with extream long response times, when looking at the queues in Message mapping test tool . Does anyone know how to improve performance.
The source message I use is about 200 segments (idoc)
The mapping is done with the graphical tool, with 10-15 field contain standard sap functions for mapping.
Target structure is EDIFACT (xml)
Brgds
Karl BergströHi Rod.
Go to Apple Menu > System Preferences > Network > Show: Network Port Configurations. Make sure that the configuration used to connect to Internet is at the top of the list. Also, disable any communications/networking configuration enabled, but not in use.
If the above doesn't fix the problem, open Keychain Access > Preferences, and disable Search .Mac For Certificates if it's enabled. Take a look at the following articles for an explanation of why this could fix the problem:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither -
Need help with my alarm clock, with Timer task and Timer classes
k everything is almost complete to get this alarm to work. It goes off and everything. But the thing is that it has a start button and when you click it to start the alarm the text changes to "Stop". This way if the user wants he can turn it off. Yet it works fine, the only problem is when the alarm actually goes off, the button text doesnt change back to "Start". Im not sure how to control private data members in classes from other classes. This is very fustrating, help would be apprieciated. here is the code that i have so far:
import java.awt.*;
import java.util.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Timer;
public class Alarm extends JFrame implements ActionListener
private AlarmSetup as;
private DigitalClock dc = new DigitalClock();
private JComboBox amPmBox = new JComboBox();
private JTextField hourField = new JTextField(2),
minuteField = new JTextField(2);
private JPanel panel = new JPanel();
private JLabel colon = new JLabel(":");
private JButton start = new JButton("Start");
private JMenuBar jmb = new JMenuBar();
private JMenu file = new JMenu("File"), timeSetting = new JMenu("Time Setting");
private JMenuItem startItem = new JMenuItem("Start");
private JRadioButtonMenuItem standard = new JRadioButtonMenuItem("Standard", true),
military = new JRadioButtonMenuItem("Military");
private boolean standardToMilitary = false;
private int hour, minute;
private int[] arr;
public Alarm()
setTitle("Alarm");
Container c = getContentPane();
panel.add(hourField);
panel.add(colon);
panel.add(minuteField);
panel.add(amPmBox);
amPmBox.addItem("AM");
amPmBox.addItem("PM");
c.setLayout(new BorderLayout());
c.add(dc, BorderLayout.NORTH);
c.add(panel, BorderLayout.CENTER);
c.add(start, BorderLayout.SOUTH);
setJMenuBar(jmb);
jmb.add(file);
file.add(timeSetting);
timeSetting.add(standard);
timeSetting.add(military);
file.add(startItem);
ButtonGroup bg = new ButtonGroup();
bg.add(standard);
bg.add(military);
military.addActionListener(this);
standard.addActionListener(this);
//the start things need to be implemented still in the action
//performed
start.addActionListener(this);
startItem.addActionListener(this);
public static void main(String[] args)
Alarm frame = new Alarm();
frame.pack();
frame.setVisible(true);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if(e.getSource() instanceof JButton)
if(actionCommand.equals("Start")){
//long seconds;
arr = dc.getTimeMilitary();
hour = Integer.parseInt(hourField.getText().trim());
minute = Integer.parseInt(minuteField.getText().trim());
String comboSelection = (String)amPmBox.getSelectedItem();
as = new AlarmSetup(this, arr, hour, minute);
as.setupAlarm(comboSelection, standardToMilitary);
start.setText("Stop");}
else if(actionCommand.equals("Stop")){
as.stopTimer();
start.setText("Start");}
else if(e.getSource() instanceof JRadioButtonMenuItem)
if(actionCommand.equals("Military"))
dc.setTimeFormat(DigitalClock.MILITARY_TIME);
standardToMilitary = true;
panel.remove(amPmBox);
else if(actionCommand.equals("Standard"))
dc.setTimeFormat(DigitalClock.STANDARD_TIME);
standardToMilitary = false;
panel.add(amPmBox);
import javax.swing.*;
import java.util.Timer;
import java.util.*;
public class AlarmSetup
private Timer alarmTimer = new Timer(true);
private long seconds;
private int[] timeArray;
private int textHour, textMinute;
public AlarmSetup()
public AlarmSetup( int[] aarr, int ahour, int aminute)
timeArray = aarr;
textHour = ahour;
textMinute = aminute;
public void setTimeArray(int[] array)
timeArray = array;
public void setHour(int xhour)
textHour = xhour;
public void setMinute(int xminute)
textMinute = xminute;
public void stopTimer()
alarmTimer.cancel();
public void setupAlarm(String combo, boolean tester)
if(!tester)
if(combo.equals("AM"))
seconds = (textHour - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
else
seconds = (textHour + 12 - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
else if(tester)
seconds = (textHour - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(alarm), seconds*1000);
import java.util.*;
public class AlarmTask extends TimerTask
public void run()
System.out.println("Billy the goat");
//dont know what to put to change the Alarm button textwell im trying to get this down. So i made a private class inside the alarmsetup class. But now when i try to use the schedule method on the timer object it says that it doesnt know it? whats the deal? here is my code for that class
import javax.swing.*;
import java.util.Timer;
import java.util.*;
public class AlarmSetup
private Alarm alarm;
private Timer alarmTimer = new Timer();
private long seconds;
private int[] timeArray;
private int textHour, textMinute;
private class AlarmTask
public void run()
alarm.changeButtonText();
System.out.println("Billy the Goat");
public AlarmSetup(Alarm a)
alarm = a;
public AlarmSetup(Alarm al, int[] aarr, int ahour, int aminute)
alarm = al;
timeArray = aarr;
textHour = ahour;
textMinute = aminute;
public void setTimeArray(int[] array)
timeArray = array;
public void setHour(int xhour)
textHour = xhour;
public void setMinute(int xminute)
textMinute = xminute;
public void stopTimer()
alarmTimer.cancel();
public void setupAlarm(String combo, boolean tester)
if(!tester)
if(combo.equals("AM"))
seconds = (textHour - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(), seconds*1000);
else
seconds = (textHour + 12 - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(), seconds*1000);
else if(tester)
seconds = (textHour - timeArray[0])*3600 + (textMinute - timeArray[1]) *60 - timeArray[2];
try
alarmTimer.schedule(new AlarmTask(), seconds*1000);
catch(IllegalArgumentException iae)
seconds = (24*3600) + seconds;
alarmTimer.schedule(new AlarmTask(), seconds*1000); -
With the new upgrade, you can no longer play music from your library as the wake-up, you have to use the sound tones. Any way around this? The upgrade, btw Apple, is disappointing. Wish I had kept the 6 version.
On iPad you can still do so. When you pick the alarm sound scroll all the way up and you should see "Pick a song". If you don't
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
How can I set an alarm clock set to a time zone?
Hi,
I am about to go traveling quite a bit in multiple time zones. However, I have to take medication every 24 hours. I use the iPhone alarm to set a time. Is there a way I can adjust it so it goes off whenever it is, say 10pm in US eastern time zone even if I'm in another time zone and my iphone clock is local time?
thanks!Hi, ralphsen01-
You can do this using window.scrollTo():
http://stackoverflow.com/questions/3163615/how-to-scroll-html-page-to-given-anchor-using-j query-or-javascript
Please note that when you embed an Animate OAM into Muse, you're in effect putting it into an iframe. Therefore, you need to call the parent window. You can get more information on this by searching for "iframe to parent communication" in a search engine.
Hope this helps,
-Elaine -
I have tried to get info on this app and it does not show up on the app store any longer so i cant contact the developer about this app for support. it does not work and i feel i was cheated out of my money for an app that was supposed to play pandora when the alarm goes off but it does nothing. i need help with this.
As stated All purchased are final.
Use the e-mail receipt to Report a problem or
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Hi there. I'm currently using MPD to wake up with just these 2 commands
sleep 6h && mpc play
But i'd like to have some script able to turn up the volume progressively. The ideal parameters would be: [% of starting volume], [% of final volume] and [time step]. I'm relatively new to linux, so if someone can help scripting, I will be thankfull.
PS: I think MPC can be useful for make this script.This is what I have been using to make sure I don't oversleep. It works quite well:
#!/bin/bash
### Wake-Up Alarm ##############
# Version 0.1 by Scott Garrett #
# Wintervenom [(at)] gmail.com #
# In case we are connected to an amplifier.
volume Master 20
# So our Last.fm account doesn't get filled with night-playlist entries.
killall mpcscribble
mpc clear
mpc load 01-Night
mpc next
mpc play
# Wait until the time specified by the user (in %H%M format) to wake up.
echo "Sleeping until $1."
until [ "`date +'%H%M'`" = "$1" ]; do
sleep 2
done
# We can start scrobbling again.
mpcscribble &
mpc pause
# Crank the volumes past eleven!
volume Master unmute
volume Master 100
volume PCM unmute
volume PCM 100
volume Beep unmute
volume Beep 100
speak It is time to wake your ass up
# Guarenteed to wake the whole dorm wing up when connected to an amplifier.
# (Needs ALSA's PC speaker beep emulation.)
beep -f3200 -l200 -d30 -r50
volume Master 0
mpc clear
mpc load 99-Everything
mpc next
mpc play
# Gracefully increase the volume of our music after having the living demons
# waken within you.
for ((x=0; x<100; x++)); do
volume Master $x
sleep 0.1
done
Maybe you are looking for
-
Share wireless internet modem from one computer to another with router model WRT120N
I am trying to share an internet connection of my Sprint wireless modem from computer 1 to computer 2. Is there a way to share the internet connection? I have successfully set up a Home Group. I have tried to share my internet connection by righ
-
Questions about front end servers
Sun Java(tm) System Messaging Server 6.1 HotFix 0.11 (built Jan 28 2005) libimta.so 6.1 HotFix 0.11 (built 16:16:35, Jan 28 2005) SunOS mailstor1 5.9 Generic_112233-12 sun4u sparc SUNW,Ultra-4 On a multiple servers installation, is there a way to mak
-
How to use radiobutton in table control ?
I have four radio buttons in a row in table control. How to group radio buttons horizontally in a table control ? Thanks in advance.
-
how can i show my computer monitor screen (touchsmart 300 pc-windows 7) on my vizio tv (M261VP LED LCD)
-
Bigger buttons and getting the menu into its container
Hi everyone Im trying to make my buttons look bigger but am not having much luck. They only get bigger by adding padding, is there not a way to set a width and a height for each...? I have tried but cant figure it out. I am also having some trouble g