ALARM DOESNT WORK WHEN EVENT POPS UP - Please Help!!!

Ok.... Sometimes, I wake up in the morning and my alarm has not gone off. This only happens when there is an event showing from my calender, a missed call, or a text message that I received while I was sleeping. I then check/cancel the event and then my alarm shows up in snooze mode.
I am not a heavy sleeper. I can wake up to the single 'bling' sound when I receive an email. So it not like I am sleeping through the alarm.
The problem appears to be inconsistent. I have not identified what is exactly causing this to happen although I have read through a few threads with other people having similar issues, but there is no solution.
I have set an event to go off with a 5 minute warning message and set my alarm to go off one minute after that and it worked fine... So I am stuck, why is my alarm not working sometimes?
Please help.

I kinda had something like this too, My alarm didnt go off once or twice, And a few times in a row my alarm would go off twice, Once @ 9:00 AM and once 9 minutes later @ 9:09 AM. Very strange, although I do not have any advice to help you since mine hasnt happened in a while. Sorry, Good luck.

Similar Messages

My colon/semicolon and apostrophe only work when they want to =[ please help!

They only work when they want to. The keys starting doing it about a year after I got the Mac. Please let me know what can be done.

Hey there jeremy,
It sounds like your Volume buttons aren't working correctly and you are also not getting sound from your built in speaker. I would start by quitting all the running apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling

I CANT INSTALL flash player 10! myspace player doesnt work but youtube does. PLEASE HELP ME

I can’t listen to music on Myspace anymore!
it says I need the new version of flash player for it. So I go to adobe website try to install the Flash player 10.0.022.87 but nothing happens, actually the box asking me if I want to install appears, but after that nothing happens.
The weird thing is that I can perfectly watch videos on YouTube and play flash games as well. I know Myspace isn’t the problem because everybody I have talked says that the Myspace player works just fine.
I hope you can help me. Thank you
Ps: I use Internet Explorer 8 and Windows xp

It doesn’t work. I have tried to uninstall it but it gets stuck in the middle of the process. FP cant be uninstalled.
It says "extracting: FlashUtil.exe
I don’t know what to do.
and yeah I have already checked on
http://www.adobe.com/software/flash/about/
I see the animation but myspace player still not working. I’m confused

HT1766 hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before

hi, i just tried backing up my iphone on icloud but th option to 'Back Up Now" doesnt work. when i tap on it, nothing happens. Im worried because my iPhone has never been backed up before. Please help

Reset the phone then try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.

Why this path doesnt work when there is "!DOCTYPE" element?

Hi, I need to extract contents from an xml file, which looks like
<hr />
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//ES//DTD journal article DTD version 5.0.1//EN//XML" "xyz501.dtd" > 
<article docsubtype="fla">
<item-info>
<jid>YANBE</jid>
<aid>12941</aid>
</item-info>
</article>
<hr />
And I have tested with this path "//article/item-info/jid/text()", but it doesnt give me anything. But I noticed that when I remove line 1, it does extract the content "YANBE"...
why the path doesnt work when there is that DOCYTYPE element? How should I get around with this please?
Many thanks!

The extract of XML you gave is not valid (Line 1: <hr/>) but besides that ... I think your problem is in the DTD.
Somewhere in the DTD it probably 'sneakily' defines a default attribute which in reality is a default-namespace for one of the elements. This means that in your XPath handling, you will have to map a prefix to a namespace-uri (NamespaceContext [1]) and use this newly defined prefix in your XPath expression.
//tst:article/tst:item-info/tst:jid/text()[1] http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/namespace/NamespaceContext.html

My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

What model is the modem? Is it a pure cable modem or a combined modem router?
This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
The TC must be in dhcp and nat mode.
Please factory reset the TC and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
By default the TC is in router mode after a reset.
Restart the modem.
The power up the TC and run through the setup utility.
The TC should then be accepted as the main router in the network.
If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

I dropped my iPhone and i tried to turn it on but it only comes on at curtain times. And it turns back off when I drop it just a little bit. Sometimes it takes like three days to turn back on. How do I get it to work regularly again?? Please help!!!

I dropped my iPhone and i tried to turn it on but it only comes on at curtain times. And it turns back off when I drop it just a little bit. Sometimes it takes like three days to turn back on. How do I get it to work regularly again?? Please help!!!

Seems like there is some physical damage causing an intermittent issue of the iPhone being unable to power on.
You could try a reset:
- hold the home button and sleep/wake button down at the same time
- the iphone will turn off(keep holding) then when the Apple logo appears release both buttons
If the reset fails I would suggest next time it powers on to try and back it up to either iTunes/iCloud then you can try a restore to factory settings or just back up and book an appointment at an Apple Store to have the iPhone evaluated.
All the best

I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent

I made upgrade for IOS to 7.04 but my iphone is second hand and when iphone need to make activation ,i don't have the apple ID so my iphone didn't work from this time so please help me urgent.

There isn't one.
amrzaky wrote:
I can't contact with previous owner s i need another solutoin
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

Having problem with my iphone camera,doesnt work when i click the camera app,but it does work when i double click when my phone is off.

having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX (Please Help)

What to do when iTunes cannot sync my iPad 3. Problem Event Name: BEX
Please Help to solve...

Hi Ahmed,
In iTunes, go to the Store in the left menu, select iTunes Store, wehn it opens, make sure you are on the home screen (icon of a house in the menu bar) and from the righthand side, select Account.
Next you will see all of your account information. Just a little don, you will find: Apple ID overview, there it says, Authorised computers; click on the button to deauthorise.
And you should be done.
Grtz, Carl.

Safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi Apple,
iphone 5s latest updates , safari still freezes when accessability voice over is on and blue tooth keyboard still doesnt work when accessability voice over is on, Help

Hi,
If you are absolutely sure that neither the sound output of the Macbook nor the sound output of VoiceOver are muted then try to reset VoiceOver.
1. Open VoiceOver Preferences.
2. From the File menu choose "Reset All VoiceOver Preferences …".
3. Click "Reset.
4. Turn VoiceOver Off and On again. (hold command and press F5 twice).
If you still don't hear anything then it could be that the main sound output of the Macbook got muted somehow. I find that I often hit the mute button on my Apple wireless keyboard without noticing. So just make sure that its not muted and also hit the "Volume Up" a few times. Its so terribly obvious I know but its also very easy to miss. Lots of people do that.

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

[NAND] s_cxt_boot:88 sftl: error, unclean shutdown; adopted 23 spans thats what appears in my iPhone 4s when I wake up please Help me

[NAND] s_cxt_boot:88 sftl: error, unclean shutdown; adopted 23 spans thats what appears in my iPhone 4s when I wake up please Help me

First try resetting your phone - hold the HOME and SLEEP buttons at the same time until an Apple logo appears.
If that doesn't work restore the phone using Recovery Mode: http://support.apple.com/kb/HT1808.
And if that fails it is probably a hardware failure (unless the phone is jailbroken; then that is the problem).

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

ALARM DOESNT WORK WHEN EVENT POPS UP - Please Help!!!

Similar Messages

Maybe you are looking for