Alarm for Traveldock zen mi

if i use my zen micro in the traveldock with the alarm set, is it ok to leave the traveldock on all night?

Argos do have the Traveldock in stock for store collection (it is listed as in stock at my local store when I did a stock check on the website). They have had it for sale for almost a month now and I actually had a look at it in person around this time at my local store and was quite impressed. However the price tag did put me off - ?30 is just too much. After contacting a few other online stores at the time, it became clear that Argos have taken the initial stock. So it might be worth holding out to see if other stores get it in stock and if the hefty price will hopefully come down.

Similar Messages

  • TravelDock Zen Micro and Zen V Plus

    I have a traveldock and I'm looking at getting a zen v plus. Will the 2 work together? It looks like they should fit but I wanted to check before upgrading.

    slap_shot_2,
    No, I'm afraid the Zen V Plus won't fit into the slot or space that's meant for the Zen Micro player but you can still use the Traveldock Line-In jack to connect to the player for music playback.
    Jason

  • Terrible sound from Traveldock Zen Micro

    We just bought a traveldock for our daughter to play her Zen Micro. When we hook up the Zen Micro to the docking ports of the Traveldock, the sound comes out very quiet and garbled. Connecting to the back line-in jack plays perfectly - only when playing through front docking ports it sounds like garbage. Very quiet, missing vocal track.
    Has anyone else had this problem? Is there a way to fix this or is this just a bad unit's
    We are very disappointed with this product.

    Thanks for the response.
    As it turns out, I did some experimenting. In the Zen Micro menu, the Audio EQ setting was set to New Age. I turned this off. Also I turned off the Smart Volume setting. Hooked it back up to the Traveldock and, lo and behold, it played perfectly.
    My opinion of the product is now much better.
    I don't know if it was the change in audio settings, making sure to attach the player firmly in the dock, or what, but it sounds much better now.
    I also downloaded but haven't yet installed the 2.2.02 firmware update for the Zen Micro just in case there's anything in there that helps its computability with the Traveldock. Anyway, we are happier now that the sound is coming out loud and clear.

  • Is there a way to get an alarm for my events for the iCal on the iPhone 4?

    Is there a way to get an alarm for my events for the iCal on the iPhone 4?

    Greetings,
    See page 113 of the iPhone 4 user manual: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    When you add an event to the Calendar.app of the iPhone 4 there is an "Alert" option which should give you the desired result.
    Cheers.

  • No Email Alarm for All-Day Events

    Hello, Everyone,
    I've got a desktop and a laptop, and I've been syncing the iCal calendars on each for some time. However, this has resulted in one annoying thing - whenever an event comes up in iCal that I'd set an email alarm for, I would receive multiple alarms, one from each machine.
    I thought I'd solve this problem by moving the calendars to my server (a headless Mini running 10.4.6 Server), and thus only get one email alarm. However, since I moved it, I'm getting no alarms.
    I've run some tests, and confirmed that if I set up a test event at a specific time, I will get an email alarm for it. However, if the event is set up to be an all-day event, no alarm.
    I've restarted the server, I've made sure the iCalScheduler is running...these calendars have worked for years, and now I'm perplexed. Any thoughts?
    Cheers,
    Martin

    Well, I couldn't figure this one out, so I just moved the calendars back to my main machine, and published them to the web for sharing with my laptop. On my main machine they worked fine.
    Can't figure out why it wouldn't work on the server. Maybe it'll change with Leopard's iCal server.

  • How can I remove default alarm for events in iCal on devices ios?

    Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
    Default alarms are disabled in macbook, icloud.com, and my ios devices.
    How can I remove default alarm for events in iCal on devices ios?
    Thanks and sorry for my english.
    MacBook Pro, Mac OS X 10.8

    OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
    I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
    So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow.

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

  • Can't install drivers for Creative Zen 'Data Inval

    I have just bought a 8gb Creative Zen but everytime I try to install it I keep getting the message "There is a problem with this hardware (Creative Zen) An error occurred during the installation of the device, The data is invalid" and when I go into device manager and click on the properties in there for the Zen (Which has a yellow iconon it) it says
    "This device is not configured correctly. (Code )".
    I looked up this error on the Microsoft Technet website and it says [size="">"by clicking Update Driver, which starts the Hardware Update wizard. If updating the driver does not work, see your hardware documentation for more information." I have tried to update the driver but it won't update either.
    I'm running Windows XP with Service pack 2
    Any help is appreciated as i'm getting extremely frustrated.
    Jim

    Re-installing XP might not, and probably won't do it. The re-install will keep most if not all of your Windows settings and installed files. It may repair or install files that are corrupted or missing, but that's about all.
    What happens when you delete the entry from Device Manager and then reconnect the player? If it still installs with a conflict, you'll probably have to track down the application or device that is causing the conflict. Also that inevitable question ... do you have Windows Media Player installed? There have been some instances where Creative players have not paired with the driver correctly with WMP, but work fine with WMP0.
    You might also want to take a look at this thread at Epizenter
    http://www.epizenter.net/e07_plugins...ic.php?95267.5
    they have some hard-core Creative fans over there and the discussion is usually a bit more in-depth regarding technical issues.
    jimr75262000 wrote:
    I was thinking that a re-install of Windows XP might be the
    answer.
    Jim

  • Data Recovery Software for the Zen Vision M

    Data Recovery Software for the Zen Vision M:
    Has anyone had any success recovering lost sound files from a Vision M, with software, physical repair services, or otherwise? Does anyone claim to be able to recover information from these devices?
    The data recovery programs I have tried fail to recognize the dri've, since it doesn't show up in list of dri'ves for some reason (Is there a way to make this show up?). Any suggestions/ recommendations would be greatly appreciated as I lost over a year of recordings after an unexpected forced reformatting. How would one even go about finding someone for this job?
    Thanks, GW

    Haven't really tried the data recovery so I would like to know more about this one too.
    http://storeyourpicture.com/images/s...lectronics.jpg

  • Windows 7 64 bit driver for the Zen Vision M?

    - Where EXACTLY can I find the Windows 7 64-bit driver for the Zen Vision M? My new computer came with it installed in Windows Media Player 2, but the driver became corrupt. I can't seem to find that driver on the Creative or Microsoft download websites. Please Help!

    The driver is nati've to Windows. Creative does not write the MTP driver. I would suggest re-install WMP2 or contact Microsoft for advice if it is corrupt. As for software to use the player on a 64 Win 7system? there is nothing for the Vision M. You may want to read this page? http://support.creative.com/KB/showarticle.aspx?sid=605&h=3

  • ICal Alarm for birthdays

    I am unable to set an alarm for birthdays. I cannot believe that this is not possible to do, anyone got any ideas?

    Hi,
    A lot of people on this forum seem to want this feature.
    I have written an Applescript Studio application that duplicates the functioning of the birthdays calendar (syncing dates to iCal in the background), plus adding a lot of extra features, including alarms.
    Dates to iCal automatically syncs your Address Book birthdays, anniversaries and custom dates to iCal, creating alarmed, editable events in a seperate calendar. With Dates to iCal you can:
    - Add Address Book date events automatically to iCal.
    - Choose which event types you want added (birthdays, custom dates or both).
    - Have any type of alarm you like for the event, from a message to emailing a whole Address Book Group.
    - Choose the notice in days and hours the alarms are set for.
    - Manually make changes (i.e. adding notes) to these events.
    - Add birthdays manually for people you don't have a seperate card for in Address Book.
    It is freeware. To get a copy go to www.nhoj.co.uk.
    Best wishes
    John M
    Disclaimer: Although Dates to iCal is free, I do ask for donations on my site. So, in compliance with the Apple Discussions Use Agreement, I may receive some form of compensation, financial or otherwise, from my recommendation or link.
      Mac OS X (10.4.5)  

  • Critical Alarm for Nexus 7010 device

    Hi Team,
    We are getting Critical Alarm for the Data center device Nexus 7010 continuously from 28-Oct.
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:00:18.227 DC-Core-Switch2 29 10:00:18 %KERN-2-SYSTEM_MSG: EXT3-fs
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:28:37.497 DC-Core-Switch2 29 10:28:37 %KERN-2-SYSTEM_MSG: EXT3-fs
    error (device hde1) in start_transaction: Journal has aborted - kernel
    2012 Oct 29 10:28:42.398 DC-Core-Switch2 29 10:28:42 %KERN-2-SYSTEM_MSG: EXT3-fs
    Also attaching the complete logs collected for this device and suggest if there is any Hardware related issue or some Software related issue.
    Regards,
    Ashutosh

    Hello
    hde1 is the logflash device. Looks like there were IO errors and the kernel mounted the fs read-only. You can try to reload the device and if logflash will come back up fine after the reload, its a transient issue; if the issue comes back, the logflash device most likely is damaged bad and needs to be replaced. You will need to open a service request with TAC to get it replaced.
    HTH,
    Alex

  • Cant find a silicone case for my zen please help does anyone know of

    [size="+2"]I?cant find a silicone case for my creative ZEN not a ZEN micro but a 20gb ZENMessage Edited by stink on 03-23-200602:5 AM

    I am not sure if this is what you're looking for. But I love the flexiskin I purchased for my Zen Sleek. I have found that it is definitely helping to keep dust out of the screen and protecting the Sleek. Here is a link of what I purchased:
    http://www.amazon.com/gp/product/B000CC7KRM/03-242852-3357458?%5Fencoding=UTF8&v=glance&n=72282

  • Easy solution for connecting Zen Touch to P

    Hi,
    I'm a Mac user, when I want to connect my Zen Touch to any Mac I used "xnjb" a small freeware (.7Mb) that I could run directly from my USB key; It work great, install nothing on the computer and could upload or download any kind of files between the zen and the computer.
    I try to find a similar solution for PC without success, I even try to install "JB3MV2_PCWDRV_US__30_03.EXE" on a computer friend; this not the ideal solution because it install something on his computer and even with that installation the window explorer see a USB device but can't read it.
    Is some one have a solution similar to what I used on Mac?
    Cheers,
    Luc

    Hi Mosey,
    I don't want the new firmware because my Zen touch work good with the old one and the Mac software for the Zen are not supporting the new firmware yet,
    Do you have a solution working with the old firmware, even if it's a third party one.
    Cheers,
    Luc

  • Arm strap for the Zen Mic

    I'd like to take my Micro to the gym, but I need an arm strap because I'm afraid of bumping the unit with a weight if I were to clip it to my waist.
    Could anyone recommend a good arm band/strap that will fit the player snugly? Anything specifically made for the zen micro (5gb) would be a plus.
    Thanks!
    p.s. I won't be able to check this board too often. If you have a suggestion and would be so kind, please e-mail me at [email][email protected]][email protected][/url]. Thanks again.

    I got one of these
    http://www.tunebelt.com/ab4
    which is pretty good and very affordable. Good service from them as well!
    As it says it was intended for ipodmini but also fits the Zen Micro.
    jake

Maybe you are looking for

  • Pavillion G

    Having problem with the sound system of HP Pavillion g series Corei3  any help

  • How can I get a cursor position?

    Hi Everyone! In my TextArea, there is a blinking cursor. How can I get the cursor position not the mouse position. Thanks,

  • Dynamic Interface in a Sender Agreement

    Hi all, I need to  know if It is possible to change the interface in a sender agreement in runtime. I wonder if I am able to make this change in a  module. Other thing I need to know if there is any way for make it possible that one communication cha

  • Urgent-smartform

    have modified standard layout of script(form) by means of smartforms,now how can i attach it to the driver program and execute and see the output of smartform.

  • Optimizer error

    Dear Sir,   When i executing the t-code DSWP some error is  coming (profile parameter icm/host_name_full is not set correctly see long test) Can u please tell me how to solve this issue. REgards, K.Ramamoorthy