Alarm not working. cannot set/create new

I have an iphone 5c running 8.0.2
I was having issues with sending text messages so I looked up similar problems and ended up having to reset network settings. this resolved the issue with the text messages but now I cannot set/create new alarms and all of my previous alarms were deleted. seems odd that the two are somehow connected but that is all I can think of that I have done since this morning (where it worked just fine).
this is very frustrating, any help is appreciated.

I am having the same problem with my Iphone 4s running 8.0.2
I noticed yesterday that all of my set alarms were deleted. When I go to add a new alarm, nothing appears after I press 'save'. The small alarm icon appears in the top right for a moment, but disappears after a split second.
There is no error message.
I've used the same alarms for years without any problems.

Similar Messages

Navigation bar not working cannot add a new one says there is a warning but does not indicate what kind of warning

In the space where you would add a widgit there is a warning so a new navigation bar cannot be added. I tried uninstalling and reinstalling but that did not help. When I pulishedd my website the navigation bar did not work. It only linked to one page but I cannot fix the problem because of the warning.

Hi
Are you creating a manual menu and while adding another menu item you are facing error ?
Please elaborate more as what are the steps you are taking and upload screenshots of navigation bar that you are using in design mode , if site is published then share the url.
Thanks,
Sanjit

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

IPhone 4 alarm not working since 01.01.2011

iPhone 4 iOS 4.2.1 alarm not working since 01.01.2011. Tried different settings such as turning off automatic update and changing location. Nothing seem to be working. Any solution?

Same for both mine and my wife's iPhone 4 4.2.1. Her work woke us up. I found a short fix while testing it out. If you setup a repeat alarm for the day you want it to go off it works. I don't know why but it works, if I don't set the repeat the alarm does not sound. Hope it helps some people but Apple... Fix it please!

Set up exchange email on my imac but that same information will not work to set up exchange on my iphone. Any ideas?

set up exchange email on my imac successfully but that same information will not work to set up exchange on my iphone. Any ideas?

If your Imac is connected to the same Lan as your Exchange Server he might be able to access the DNS record for the autodiscovery services (the url that allow outlook/entourage or modern smartphone to autoconfigure the exchange account).
If this url has not been made public by your IT staff, your iphone cannot resolve it.
Typically, the url for autodiscover is based on your address email domain, i.e. if your email address is [email protected] the url for autodiscover will be https://autodiscover.company.com/autodiscover/autodiscover.xml
A good test is try to open this URL from a web browser (authentification may be requiered) from the imac and iphone then compare result. The expected behavior would be the display of an xml page with very little content (this is normal), if there is an http error or that the page cannot be displayed then autodiscover is not available from the network you are using.
If so you need to request from your IT the name of the ActiveSync Url to use, most company use the same as the webmail url, so if to access your wemail you need to go https://webmail.company.com, the name to use on your iphone would be webmail.company.com
Hope that help
TriaaD

BB apps is not working, how to create BB email add? please help

BB apps is not working, how to create BB email add? please help

If none of the blackberry apps are working and you are unable to setup an email address..... have you got a Blackberry Data Plan active on your account?

Not working my setting for my icloud

not working my setting for my icloud

In what way is it not working? Please give us more info.

IPhone 4s back camera not working even after buying new iphone 4s

Back when the ios 6 updates were coming out in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone and finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

A new phone has a warranty. So take it to an Apple store. If they can't fix it, they will replace the phone. Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do?

When I try to open Lightroom5 (creative cloud) I am taken to the Select Catalog screen but I have no catalogs and I am not being allowed to create new ones. What can I do to correct this?

This could be a read/write permissions issue with the destination folder for the catalog. Use your favorite search engine to search for changing disk permissions. What operating system are you using?

Alarm not working. cannot set/create new

Similar Messages

Maybe you are looking for