Alarm problem solve

Most likely it the app notification. Settings nitivications apps and check alarm app and turn nitivications back on. This did it for me. When I got the phone, I turned of some of them and the problem started

@zoutzak
http://talk.sonymobile.com/t5/Software-Updates/Lollipop-New-Features/m-p/955490#U955490
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

3110c Alarm problem

The alarm clock on my 3110 classic is not working properly.
All works fine if no repeat days are set (or if all days of the week are enabled for repeat).
However if repeat days are set with some days disabled, the alarm does not always function as expected. Sometimes the alarm does not sound on enabled days or it sounds on disabled days (at the set time).
This problem started after the LCD screen was repaired by the local Nokia service agent. They also upgraded the firmware to ver. 6.60 (not sure what it had before).
The security code was set on the phone, but they never asked for it. Can this cause a problem when updating firmware?
I updated to firmware ver. 7.21 RM-237 using the Nokia software updater, but the problem still persists.
Any suggestions?
Solved!
Go to Solution.

Well after setting the date several times and rebooting the phone after each, the problem has disappeared!
I suspect that it had something to do with the date not updating when set, but cannot understand why or how this problem solved itself...
Anyway, the phone is working reliable again and my wife is happy to have her phone back.

Printer Problem Solved!

I was happily printing valentines for my grandchildren when all of a sudden my Epson Stylus N11 would not go. The printer icon in the dock bobbled and the message said the printer did not recognize the ink cartridges! Very weird. So I turned the printer off and on and then when I tried to print the message said the computer was unable to communicate with the printer. Restarting my iMac did nothing.
That was very alarming. Did this mean the printer was malfunctioning? Would I need to go out and buy a new one?
Then I went to my preferences in my home folder and deleted everything that said printer or Epson. Restarted the computer. Problem solved! The symptoms seemed to indicate a problem with the printer itself, fortunately it was not. I thought this might be useful to share.

Hello Lars,
i agree with you that the v2.00 of the UFR2 driver works. I have been recommending it for a while now in this forum.
However, during my testing I found that it did not always work perfectly on 10.6 and it did not support all the models of Canon iR. So while it is currently working to your iRC4580, it may not be your final solution because it was not designed to work with 10.6 and I just wanted to make others who read your post aware of this.
Also, because the driver does not officially support 10.6, I was suggesting this as an explanation why Canon
Europe had not posted the same.
One final note. For the sake of other readers If the iRC4580 had an imagePASS-H1 print controller attached, rather than using the internal Canon board, then the UFR2 driver cannot be used.
Hope this clears things up. Like I said, I wasn't disagreeing with you. i was just trying to answer some of the items you raised.
Pahu

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Bug fix for Mac book wireless - problem solved!

Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
I haven't even attempted to touch my router configuration - don't need to.

Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
Mac OS X 10.3 or later
1. Log in as the user who wishes to have a login item or as an admin user.
2. Choose System Preferences from the Apple menu.
3. Choose Accounts from the View menu.
4. Click the name of the user.
5. Click the Startup Items button
6. Click the "Add {+}" button.
The item you selected will automatically open the next time you log in.
there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
http://www.apple.com/macosx/resources/
happy mac-ing!

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

Acrobat printing problems (solved)

Hi Folk
I'm getting on well with Arch apart from one problem, I can not print from Acrobat reader, it accepts the command and does precisely nothing, the jobs are appearing in cups but not being printed, I can print from Open Office and test print from cups but no cooperation with acrobat, anyone have any ideas? thanks
Pete
Last edited by pete051 (2009-09-29 19:14:12)

I don't know what DE are you using. In my case, I use xfce and when acroread starts with his stupidity I just change the print command to 'xfprint'. That forces acroread to redirect the print job to xfce's printing frontend, and problem solved.
Now, if you're using kde, I guess there is something named 'kdeprint', 'kprint' or similar. For gnome, I've no idea.
I hope this helps.
p.s. Sometimes, cups takes his time to print. When its taking too long I purge cups' temp files and restart the daemon.
Last edited by kjon (2009-09-25 00:32:23)

Missed a flight due to Alarm Problem!

I don't know why apple didn't send out any warning messages to users about this issue. Apple really upsets me!

No, January 1st is NOT when the i Phone alarm problem hit -- Apple has known about this problem since it first showed up on iPhones in New Zealand in October. see this Apple Insider report from last November:
"The new support document [<http://support.apple.com/kb/TS3542>]*, published on Wednesday [11/03/10], comes days after Apple made headlines with an iPhone bug that caused repeating alarm clocks to go off late across Europe. The issue occurred because of a change from daylight saving time, and could repeat itself in the U.S. on Sunday when America concludes daylight saving.
Apple's documentation notes that users can resolve the issue by setting the repeat interval on an alarm to "Never." If users reset their alarm every day, the daylight saving bug will not affect them.
The support note says that after daylight saving ends in the U.S. on Nov. 7, users will be able to set their alarms to repeat again. The iOS issue affects the iPhone 4, iPhone 3GS, and iPhone 3G, as well as the fourth-, third- and second-generation iPod touch models.
In October, the same bug caused alarm clocks in New Zealand to go off an hour early. Apple said it was aware of the issue and had already developed a software fix, but it has not yet been released.
This week, Apple released the golden master of iOS 4.2, the next software update for the iPhone, iPod touch and iPad, to developers. Golden master status suggests that the software is finalized and a release to the public is imminent. It's possible that Apple could release the software update before this Sunday, allowing users who update their iPhone to iOS 4.2 to avoid the daylight saving bug."
*Apple Support doc: <http://support.apple.com/kb/TS3542> posted November 3, 2010, which said:
"Symptoms
In some regions, shortly before or after the daylight saving time (DST) change, repeating alarms created in the Clock app may work incorrectly.
Products Affected
iPod touch (2nd generation), iPod touch (3rd generation), iPhone 4, iPhone 3G, iPod touch (4th generation), iPhone 3GS
Resolution
To resolve this behavior for existing alarms, set the repeat interval to Never. You will need to reset these alarms for each day you need them.
After November 7th, 2010, you can set your alarms to repeat again"
NB: This Apple Support doc was posted 11/03/10, and has not been updated since.
But the problem didn't "fix itself" on 11/07/10, after the DST change, and it didn't fix itself today, January 3, 2011 -- Apple's next promised date that the iPhones would "fix themselves," -- as both my daughter in CT, and my son-in-law in KC, KS can attest: their iPhone "wake-up" alarms both went off an hour late, in different time zones.
Want more on "No kidding, Jan. 1 is when the problem hit. Jan. 3 it goes away?" Try these:
Computerworld IT Watch
iPhone alarm clock glitch: Still not working; iOS bug FAIL
By Richi Jennings. January 3, 2011
Despite Apple's promise that it would fix itself by today, the iOS alarm clock glitch is still making pomaceous owners oversleep. iPhone and iPod Touch alarms stubbornly persist in not working due to yet another bug with alarms. In IT Blogwatch, bloggers rub their eyes in disbelief.
From SkyNews, 01/03/11
An Apple spokeswoman released a statement to Macworld on Jan. 2 saying it was aware of the problem and that the alarm on the £499 ($773) handset would begin functioning normally again Monday.
However, the firm has yet to release a further statement on the problem.
Read more: http://news.sky.com/skynews/Home/Technology/iPhone-Users-Say-Alarm-Clocks-Yet-to -Be-Fixed/Article/201101115878764
from CNNTech, 01/03/11 ,http://www.cnn.com/2011/TECH/mobile/01/03/iphone.alarms.mashable/index.html?hpt= Sbin>:
"Apple said yesterday that the failure of its clock app only happens when you set a one-time alarm, and it will somehow fix itself on January 3.
"We have made a call and sent an e-mail into Apple asking why this happened."
From PC Magazine: <http://www.pcmag.com/article2/0,2817,2374971,00.asp>:
"iPhone Alarms Still Silent On January 3 "Self-Fix" Date"
"Just two days ago, we reported about a frustrating glitch for those using various permutations of iOS 4 on Apple's iPhones—specifically, an annoying bug that was preventing one's mobile alarm from ringing on either day.
"The bug allegedly only affected single alarms set for either January 1 or January 2. According to Apple itself, the company was aware of the issue and was advising users of a crafty workaround—setting recurring alarms for either day, which would bypass the issue for whatever reason. And according to said Apple spokesperson, the bug would allegedly go away on its own come January 3.
Or so we all thought.
"Reuters is now reporting that some iPhone users are indicating that the alarm issue persists, a claim that's being slowly backed up by affected users' Twitter posts."
Washington Post 01/013/11:
<http://voices.washingtonpost.com/fasterforward/2011/01/iphonealarm_problemspersist.html?wprss=fasterforward>
"iPhone alarm problems persist
By Hayley Tsukayama
Call it Y2K-11. When a bug kept iPhone and iPod touch alarms from sounding on Jan. 1 and Jan. 2, Apple suggested that those having trouble should set recurring alarms, and that the alarms would fix themselves by Jan. 3, the first work day of 2011."
Yahoo News, UK & Ireland, 01/03/11: <http://uk.news.yahoo.com/22/20110103/ttc-uk-apple-asia-fe50bdd.html>
"Some iPhone users in Asia and Europe complained of malfunctioning alarms on the first working day of 2011, even after Apple reassured users that its phones' built-in clocks will work from Monday.
"Bloggers, Facebook and Twitter users complained they missed flights or were late to arrive at work, as the alarm built into Apple's iPhone failed to go off for a third straight day for some users."
BBC: <http://www.bbc.co.uk/news/technology-12104890> 10/02/11, updated 09:14 ET 01/03/11:
iPhone alarms hit by New Year glitch
Setting New Year single alarms was to no avail
A glitch on Apple's iPhone has stopped its built-in alarm clock going off, leaving many people oversleeping on the first two days of the New Year.
Angry bloggers and tweeters complained that they had been late for work, and were risking missing planes and trains.
Apple has acknowledged the problem and says it will be fixed by 3 January.
The reason has not been given but the glitch appears to affect single alarm settings on the iPhone 4 and earlier models with software updates.
“According to the company, the problem will resolve itself on 3 January, but that is two days late for many people”
Jonathan Fildes
BBC Technology reporter
A similar problem hit the iPhone alarm when the clocks went back in November, again causing many users to be late for work or for transport arrangements.
"We're aware of an issue related to non-repeating alarms set for January 1 or 2," Apple spokeswoman Natalie Harrison said in a statement quoted by Macworld.
"Customers can set recurring alarms for those dates and all alarms will work properly beginning January 3."
'Two days too late'
"BBC Technology reporter Jonathan Fildes says the problem is embarrassing for Apple, not only because of previous problems that came to light when the clocks changed, but because the company prides itself on the simplicity of use of its products.
"This seems like another simple error, but it cannot afford to have too many before its reputation becomes tarnished, he says.
"Apple should have learnt from that example and seen this one coming, he adds. According to the company, the problem will resolve itself on 3 January, but that is two days late for many people.
"More than 1.7m people around the world had bought iPhone 4 handsets by June 2010, in what was the company's most successful product launch."
DEAR APPLE DISCUSSION GROUP MODERATORS:
This is not a rant, I'm simply reporting the news regarding the situation with the iPhone Alarm function as it stands this morning, 01/03/11. People claiming that this was a new problem as of 01/01/11 are simply wrong, as your own TS doc <http://support.apple.com/kb/TS3542> of November 03, 2010 clearly attests.
It would certainly be helpful to know the latest Apple timetable for the iPhone alarm problem to "fix itself," or if Apple has managed to come up with any workarounds, other than the third-party alarm clock apps that are available for the iPhone.
Best of luck.
Bart Brown

Stuck with grub problem (SOLVED)

Today i tried to upgrade my Arch Linux, it downloaded everything that should be downloaded, it was installing upgrades but at the installing grub it stucks as like this
"Copying /boot/grub/grub.cfg.pacsave to /boot/grub/grub.cfg"
I've waited it for about 15 minutes, it didn't move on. So i did ctrl+z to break. Then i tried to update again. But it gives an error which is:
error: failed to commit transaction (conflicting files)
python: /usr/bin/2to3 exists in filesystem
Error occured, no packages were upgraded.
Please help me guys!
Last edited by bilgee0629 (2011-03-21 10:36:28)

Problem solved by moving 2to3 to other directory.

Dr.Watson problems solved.

DR.WATSON PROBLEMS SOLVED:
System:
WLS 5.1 with SP11 running on NT4 Using OCI817_8.
Oracle 7.3.4 running on NT4.
Problems:
Dr.Watson exceptions in native code...
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside
the VM.
# Program counter=0x60239689
When asking BEA and Oracle:
"Use the latest OCI available. It is backward compatible !"
What have been done to solve the problem:
Going through all SQL code (and doing some rewriting), configuring connection
pools (TestOnReserve / TestOnRelease, refresh, etc) and several other configurations...
At last, we tried to change to the OCI version matching the Oracla versions we
were connecting to (from OCI817_8 to OCI734_7).
Voila ! NO MORE DR.WATSON EXCEPTIONS !
Our conclusion:
If possible, use the OCI version that matches the Oracle version you are running
on.

Hi Abhijit
Couple of pointers which could resolve the issue:
1. Since you are using the JDBC-ODBC bridge what occurs internally is that your JDBC API through the Virtual Machine make calls into the ODBC API on your Windows system. So the Watson error that you are getting is probably an illegal access by one of the methods in the ODBC API - this is for the Diagnosis part.
2. The Solution part -
a. Should I change my JDBC-ODBC driver? Not necessarily because the problems could be with the ODBC interface implementation and changing the driver might not help.
b. Should I change my programming style? This is one thing which could really help. The problem with creating connections each time is that it takes a lot of resources to do it, So there is a performance degradation. What you could do inyour code is use a Java Bean to create the required Connection. You can also think of using a prepared statement appropriately encapsulate it since you are invoking a particular query repeatedly. In your JSP page you can retrive(create) this bean through the jsp:useBean tag with the session as the scope attribute. The <jsp:setProperty methods could also be used to set the DSN name and the driver.
Once this bean is successfully created you have an open connection.
Now for the part you have pasted - replace the create connections with getting a new Statement object which would hold your Query. At the end of the JSP just close the Statement object.
Once you are done updating the page you may transfer the control to a different JSP - Let that transfer trigger the connection close in the Java bean.
This should solve the Dr.Watson problem.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

Am I able to find my iTunes serial number? I need it for the problem solving as my problem is solely bad on my iTunes.

For the Apple problem solving section I need a serial number, my issue is that my problem regards missing contents within my iTunes. Do I have an iTunes serial number? And if so, where can I locate it? If there is not a serial number for iTunes, advice on what to do next is much appreciated.

iTunes has no serial number. If you are trying to get to Apple phone support, that is linked to the purchase of Apple hardware, so you need to enter in the serial number of an Apple device. Otherwise, for assistance with problems with iTunes itself you would need to call Apple Support and they would almost certainly charge for the call. I would instead suggest you post the issue you're trying to address here in detail. Someone here can probably offer suggestions.
If your issue is with the iTunes Store, not the iTunes application, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report your issue to the iTunes Store.
Regards.

Aperture to export photos either TIFF or JPEG files, highlight and shadow transition has obvious faults, this problem solved!?

Aperture to export photos either TIFF or JPEG files, highlight and shadow transition has obvious faults, this problem solved!?

What problem?
You will have to be _a lot_ more specific if you'd like responsible feedback.
I export thousands of TIFF and JPG files a week with no obvious faults.
(Sent from my magic glass.)

HOTSYNC PROBLEM SOLVED -between Palm TX using desktop version 6.2 & Windows 7 64 bit

I to struggled with performing hotsynch between my Palm TX and my new Windows 7 64 bit computer. After 2.5 hours of palm tech support on my pc they gave up and deemed the task not solvable. I spent hours trying various options-nothing worked until this.
I performed a google search for Toshiba bluetooth x64 drivers. This took me to the following link:
http://aps2.toshiba-tro.de/Bluetooth/?page=download
I downloaded PC Bluetooth Stack version 7.00.10 for Windows 7 x 64. After downloading this suddenly the palm syncing software on my pc gave me the option to connect via bluetooth and I was on my way. My bluetooth dongle (cirago BTA-3210) was not a toshiba, but did use the toshiba driver stack. The driver that came with the bluetooth was not up to date- even though it was just purchased at newegg. The driver update that my pc found was also not 64 bit compatible. The only fix was to download the driver from Europe- hooray!!!!! PROBLEM SOLVED
Post relates to: Palm TX
Post relates to: Palm TX

Thanks for reporting your success!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Alarm problem solve

Similar Messages

Maybe you are looking for