Alarm reset not working

My alarm reminders pop up fine, but the three buttons on the right do not work most of the time, i.e. close, reset timer and the examine doc in iCal buttons.
On occasion they will pop up or work straight away, but most of the time they are just inactive. Really frustrating when you are just looking to reset the alarm for another 15 mins!
The normal top left Red 'close window' button does work though.
Any thoughts?

Hold down the Command key when you click them and they will work every time. Cheers!

Similar Messages

MY iCal alarms do NOT work...

MY iCal alarms do NOT work since January 2009! Not during Leopard and not now in Snow Leopard. I have tried desperately to get my sounds back and checked ALL preferences for iCal. Anyone else have this problem and WHAT can I do about it? What is the "fix" for this stupid glitch???? 911...

+*MY iCal "Update" to those who might experience the same i-s-s-u-e of no alarms popping up and no sound either.+*
I did go to my Apple Sore and traipsed up to the Genius Bar with my 24" iMac... AFTER I made a reservation online of course. I do have that great little AppleCare Protection card.
The good news is that Brad, my genius, at the Apple Store Genius Bar fixed my problem! My iCal now pops up my alarms which I "hear" clearly and on time! *Problem fixed in 5 minutes. WOWZER!* He also told me the iCal problem wasn't my fault, there were some files he needed to delete in my library and cache folders and that the problem seemed to be just a glitch that shouldn't happen again. He didn't know why the files where there... they just were. Thank you, Geniuses at my Apple Store in the Millenia Mall, Orlando, Florida.
Problem in iCal solved. *So this is my story and I'm sticking to it. ;-)*

Alarm Clock Not working from 12:00AM 01/01/2011 ?

Has anyone experienced their alarm clock not working today ? I set an alarm this morning and it never went off.

Wow, do you literally sign up and post without even looking. Just scroll down list as this has many threads already started.
I do apologize for coming off rude, but does show zero effort on your part.

I'm using iPhone 4S, why my weekdays alarm still not working?

I'm using iPhone 4S, why my weekdays alarm still not working?
By the way, single alarm is working.

wifi appears to be OFF and ON on my device !.
but when i used to turn it ON , it is not showing anything.
just showing as 'searching for devices'.

Lumia 920 alarm clock not working properly

The alarm clock on my Lumia 920 does not work properly. It randomly fails to sound the alarm. When the alarm should sound it just disables itself without making any indication that something has happened. Usually this happens when re-enabling existing alarms. This week I tested to always create a new alarm and it has already failed multiple times. Rebooting the phone seems to solve the problem temporarily but it always comes back.
I have not hard reseted my phone as I was hoping that the Amber update would contain a fix, but unfortunately the problem still exists with the update installed . I don't turn my phone off for the night and the problem is not with the volume being muted etc.
I bought my phone in December 2012 from the operator TeliaSonera (Finland).
This bug is really annoying as I have to carry a secondary device just for the alarm.

Ive found this problem with the 920/925 myself i usually stick it in flight mode at night now and leave it upside down so as to get full effect from the speaker,on the 925 that is.
I Hard reset it and its been fine since.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My alarm is not working

i set my alarm for the morning and my volumes was all the way up and so was my sounds in settings and i wake up half an hour after my alarm went off but not a sound came out!? i used this every mprning and now all of a sudden the new year comes and its not working at all!!! i need help por favor.

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Screen is frozen on apple logo and standard reset not working

All of a sudden the apple logo appeared on the screen of my 6th generation ipod classic and the standard process to reset will not work although I've attempted it numerous times. I also noticed that my ipod is not being recognized by either My Computer in Windows 7 or ITunes. I need help desperately!

So you can't the iPod to boot past the Apple logo? What happens if you try to manually force it into Disk Mode? Does that work? If so, you can try connecting it to your PC and iTunes in that mode to see if that will iTunes or your PC recognize it long enough for you to perform a restore operation.
Putting iPod into Disk Mode
B-rock

Alarm Clock not working

I have been unable to find a way to get the Alarm clock function to work on my nano.
When setting to "beep" it should use the internal speaker on the nano, but it is not doing so (even with clicker sound turned on or through headphones or both).
Time is set correctly, turned on, etc. but no alarm.
Anybody else encountered this problem?

I bought my 4gb black nano online, will I have a problem exchanging it instore here in LA? I want to exchange it, I'm very unhappy with the alarms not working. Even the guy at the genius bar couldn't get them to work.

Af:query + reset not working

Hi,
I am using jdev 11g(Version 11.1.1.3.0) .
I created a view object for a table with query which has a where clause( the clause expects a date from the user).
then i dragged the All queriable attributes on the jspx page as query with table option.
it renders a search region with iinputext(case id) and input as date(calendar) and a table below it which is rendered as per the input.
Everything works normal, but when i click on the Reset button rendered in the search section, it does not clear the date field.
if i write soemthing in case id field, that is cleared on the reset but the value entered by clicking the calendar is not resetted.
Besides on reset, it does not clear the table as well. Well from what i have been reading i assume i will have to reset the table programmatically.
But i am not so sure how to approach this situation.
Will highly appreciate if i can get any suggestions or point me to appropriate links.
Thanks in advance
ash

Hi,
When i try to programmatically reset the table, it does reset it but the problem is after resetting if enter a search criteria and click on search again, nothing shows up.
If i do a search before clicking on reset, it works fine, but afer reset the search stops working??
Any idea why this could be happening?
Following is teh reset code which i am refereing
    if(QueryOperationEvent.Operation.RESET.equals(queryOperationEvent.getOperation())){
      AppModuleImpl am = this.getAm();
      ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
       submittalVO.setNamedWhereClauseParam("bind_date", "");
       submittalVO.executeQuery();
       AdfFacesContext.getCurrentInstance().addPartialTarget(resId1);
    queryOperationEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
on the jspx page, have added the following code in af:query component
<af:query id="qryId1" headerText="Search" disclosed="true"
                              value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                              model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                              queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                              *queryOperationListener="#{backingBeanScope.backing_SubmittalLog.resetListener}"*
                              binding="#{backingBeanScope.backing_SubmittalLog.q1}"
                              resultComponentId="::resId1"
                              saveQueryMode="hidden" />Thanks
ashvini

Reset NOT Working

For the past month my Time Machine hasn't been able to keep its network up for more than about 5 minutes. Sometimes when I do a hard reset (take out the power and ethernet internet feed cables then re-plug them after a couple minutes) it will come back and the network will work (though only for 5-10 minutes). Other times the reset does not work at all.
The obvious reasons for this being annoying are: I can't get on the web and I can't back up my computer.
Anyone have any thoughts?

You may do better in the Time Capsule or Airport forums, as many of us here (like me) aren't very familiar with them.
Those forums are hidden in the DIgital Life section, at: http://discussions.apple.com/category.jspa?categoryID=140

OBIEE 10g RPD Paswword Reset not working

I have gotten 2 10g RPDs, the password of which I do not know. I ma trying to change/ reset the password by making use of the technique wherein "AUTHENTICATION_TYPE = BYPASS_NQS;" is uncommented within the NQSConfig.ini file. It does not seem to be working. I have also changed the Default RPD name within the config file to the new RPD alongside ensuring there are no gaps/ spaces in the RPD name which are the common pitfalls.
The strange part is that it did work with another 10g RPD couple of weeks back but is not working with the two RPDs I got yesterday. I have just the client 10.1.3.4.2 installed so eliminates the possibility of the BI server being up and running.
Is there anything else that could be preventing/ hindering this?

Nope. Did not work. Message returned back is that the existing password does not match the RPD password.
I have pasted the NQSConfig.ini file from "OracleBI\server\Config" below, just in case I am overlooking something that you happen to spot that might be preventing the overwrite:
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star     =     tsbrit03_VisualBI.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "English-usa";
SORT_ORDER_LOCALE     =     "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with manageRepositories permssion
# 2: evaluate is supported for any user.
# other: evaluate is not supported if the value is anything else.
EVALUATE_SUPPORT_LEVEL = 0;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Mac acting as if the apple key is stuck down+ pram reset not working

My Mac pro has started acting as if the apple key is held down! Menus and cursers are all wrong or not working at all. Rebooting cures it for a few hours but sometimes only a few minutes, I've tried swapping keyboards ( twice ) and using diffrent usb sockets without any joy so I'm starting to think it's a system problem. One suggestion I read was to reset the pram but even that won't work. Holding down the command / option / P / R combo at start up doesn't do anything.
HELP! PLEASE

Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some Discs have it inexplicably on Disc #2. Some models have a separate AHT CD.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

TCP Reset not working

I have my man-port on vlan 2 this is our MGT vlan we do not use vlan 1, tcpreset is not work. Below is the step I did to set it up
1 vlan 1 is up but no ip address on this due to vlan 2 is MGT IP
2 I have the man-port on vlan 2
intrusion-detection module 9 management-port access-vlan 2
3 I ran the tcpdump and noting came back go a pars error.
can anyone shed light on my problems I'm not sure I have everything config right.
Thanks

Not sure what you are asking.
Sounds like you may be confusing the management port with TCP Reset event action for signatures.
The TCP Reset packets as event actions for signatures will not be sent out of the management port. They are sent out a TCP Reset port.
The TCP Reset port is not user configurable or even viewable in Native IOS.
The configuration you need to worry about is not the management-port but instead the data-ports of the IDSM-2. The data-ports need to be properly configured to monitor the traffic you want to execute the TCP Resets on,

PI7.1 HU6 password reset not working

Hi Guys
I received password reset emails few days back. I was able to reset and change password for all system except PI 7.1 HU6 system. I have tried multiple times receiving new reset password but for some reason, I am not able to login or reset my PI 7.1 HU6 password. The client is 800
Can you please let me know the solution if any you faced similar situation
Thanks

Hi Trevor
I have 'S' User id...I cant create a message as you said..Seems like i dont have enough authorizations...Every time i request password reset to PI 7.1, I get all systems reset and only PI does not work
can you let me know other possibilities
Thanks
Kishore

HT3964 MBP SMC reset not working

The built in- camera on my MBP is not working. I've identified the problem and it lies in the SMC, following this guide: http://support.apple.com/kb/ht3964 told me to press the ctrl + option + shift + power button simultaniously as well as releasing them the same way. There is no way to remove the battery unless i intend to remove 10 screws, so I take it I am not supposed to solve the problem this way..? Anyway, when turning on the computer after following instructions it simply powers up as normal, I log in and the camera is still not found. Is there anyway I can solve this problem myself?

It wouldn't hurt to re-install OS-X. Maybe a PRAM reset would help, you could try that for good measure. http://support.apple.com/kb/ht1379 Upgrading to OS X Mountain Lion wouldn't exactly be directly related but it's not a bad idea either. It's only about $20 right now!

Alarm reset not working

Similar Messages

Maybe you are looking for