Alarm settings under iPhone clock

After the time change all of my Alarm settings are an hour behind. They show the correct time but go off an hour later. I've powered off the phone and still they don't go off at the time set. Has anyone else had this problem. I've re-crated my alarms and that has fixed the problem. I don't know if anything else is off-set due to the time change.

I had the same problem, but in my case simply rebooting the iPhone 4 sorted it out. What I didn't think to try was using the Application Switcher (double-click home button) to quit the clock app. It may be that the Clock app retained the DST version of the alarm times as long as it had been running continuously since before DST ended. If so, it's possible forcing the Clock app to quit and then restarting it would have cured it. Or not; I really don't know.
I didn't notice that anything else was affected.

Similar Messages

  • I got the new iPhone 5C. In my cellular settings, under "Use cellular data for", it only show passbook and facetime. How can I add other apps? Also, my carrier is AT&T

    I got the new iPhone 5C. In my cellular settings, under "Use cellular data for", it only show passbook and facetime. How can I add other apps? Also, my carrier is AT&T

    Hello Sophie59
    You should be able to see two different tabs when setting up the email if you go to Other > Add Mail Account. Once you enter in the email address and password, you should be at the next screen to provide more details about the email as far as incoming and outgoing servers and at the top there will be a blue section to add it in as a POP or IMAP email account. Check out the article below for further troubleshooting and emails setup options.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    iOS: Adding an email account
    http://support.apple.com/kb/ht4810
    Regards,
    -Norm G.

  • Can I trigger an applescript from my iPhone clock alarm?

    I have a home audio system in my home in which my computer is one of my sources. I have an applescript that tells me the current weather, if my sports teams are playing that night or anything else in my calendar for the day. I would like to be able to control this through the alarm on my iPhone. If I had my alarm set for 6am it would trigger this applescript and act as an alarm through my speakers. It would only trigger this event if the alarm is enabled. Is it possible to trigger an applescript through my alarm in the clock of the iPhone?

    Pretty much no. There is no way to trigger an Apple Script on your computer using the clock app on your phone.

  • HT4623 My iPhone does not have "software update" in Settings under General

    Hi,
    I have an iPhone 4. It has the software it came with - iOS 4.3.3 I believe. I want to upgrade it to iOS6 but I'm not sure how. First, in my settings under general, there is no "upgrade software" section. Second, do I need to upgrade to iOS5 first before I upgrade the phone to iOS6? Also I ended my contract with AT&T months ago & they still have a "no sim" message on my ipad2 (successfully upgraded to IOS 6 after I upgraded using the macpro laptop computer I have to upgrade it to iOS5 it took forever to upgrade to 5 and only 20 minutes to upgrade to 6) anyway, back to my iPhone 4 - I use it on my wireless network at home. I do not use it as a phone and don't plan to. But I use it for so many other things around the house (stay at home mom) like calendars and email and a book. Can anyone help me with the questions I have about upgrading my iPhone 4 to iOS6 without losing the newborn baby photos of my 7 month old?
    Thank you!!

    Only iOS 5 and later can be updated "over the air".  If you want to upgrade your iOS you will need to do so using iTunes. 

  • How i change the apn settings under ios6 on iphone 5 ??

    ??

    I have an unlocked UK iPhone5 on T-Mobile, and can't for the life of me find the APN settings.
    There is no 'Settings --> General --> Mobile Data scroll down a little -- Mobile data network' option
    & as someone on another thread suggested, there is no option to change settings under the Cellular button either!
    Please help!

  • Re: alarm settings on Nokia 5800

    The mp3s wont show in the alarms menu if you have too low RAM or your memory card has corruption issues.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

    chanchan05's post actually belongs to this thread:
    /t5/Nseries-and-S60-Smartphones/alarm-settings-on-Nokia-5800/td-p/732881
    There's something wrong, Original Thread is moved to Nseries but chanchan's post is still here.
    @Mods: can you please move this to its thread.
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • I have a new Apple ID and have updated it in iTunes. However it still says the old ID in settings under iCloud. It will not let me change it and prompts me to enter my password for the old ID. I put in the old Password but it doesn't work.

    I changed my Apple ID and it is not changing on my ipad. I did change it in iTunes but I can't change it or delete or update in settings under iCloud. It prompts for the password to the old id I put that in and it tells me that's not correct. I put the new password in and it tells me that's not correct. HELP!

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT4623 Unwanted Alarm/Reminder on iPhone

    My iPhone sets off an alarm/reminder sound when I have it connected to a power source and have the clock application displayed. I cannot find any place I've set it to do this. I can't use it for my alarm clock because this sound comes on randomly--usually at the top of an hour. Any suggestions to stop it so I can use the alarm feature on the clock?

    Hi DLN355,
    Welcome to the Support Communities!
    The articles below may be able to help you with this.
    Click on the links to see more details and screenshots.
    iCloud: Troubleshooting iCloud Reminders and Tasks
    http://support.apple.com/kb/ts4000
    OS X Mavericks: If you turn off iCloud Reminders on your Mac
    http://support.apple.com/kb/PH14400
    If you turn off the Reminders feature in iCloud preferences ( Apple menu > System Preferences > iCloud) or Internet Accounts preferences, your iCloud reminders are removed from your Reminders app. If you turn it on again, your reminders reappear in the app, up to date.  If your other devices have iCloud Reminders turned on, they continue to have your most recent reminders.
    OS X Mavericks: Keep content current on all your devices with iCloud
    http://support.apple.com/kb/PH14354
    Cheers,
    - Judy

  • Dashboard Clock Widget like iPhone Clock

    I've had an iPhone for a couple of years, and this week I'm finally making the switch from PC to Mac. One of the really simple questions I have is where to find a clock widget for the dashboard that functions like the iPhone clock with time zone clocks, timer, and alarms. Everything I've managed to dig up so far is too bloated for simple daily tasks like quickly checking what time zone a client is in before calling. Is there anything out there someone can recommend that is as easy to use and straightforward as the iPhone clock app except for the dashboard?

    Actually if you want to do a bit of tinkering you can change the clock face to ANY city town or village you likr just follow this link
    http://www.macosxhints.com/article.php?story=20050430193250534

  • HT4623 my  phone 4s stop making sounds, I tried reset and still no sounds only vibrate reset  all settings under general and still have the problem, also sync again to see if this help. still no sounds

    my  I phone 4s stop making sounds, I tried reset and still no sounds only vibrate. Did reset - all settings under general and still have the problem, I also re- sync again to see if this help. still no sounds.

    Hi there,
    It sounds like you have tried a few things already, but you may still find the article below helpful.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    -Griff W.

  • IPhone Clock App. (error?)

    If you go the iPhone Clock, set any world clock, and notice that rather than displaying the day of the week, it displays "Today". I'm no "genius", but I'm pretty sure that it's today right now. I'm also pretty sure that it's always "Today", but is that just laziness in coding or perhaps a slight oversight? Maybe they grab the day of the week from the Calendar App which shows "Today" in one place. Who knows? Is there any Apple staff that read this that can suggest a fix or let the right department know for a future update?

    But it's a world clock - all it's meant to do is give you the time and day in relation to your own local calendar settings. I've got Melbourne entered in my world clock. It's currently showing "21.08 Today", cos they're 9 hours ahead of me in the UK. In 3 hours time, the Melbourne entry will say "00.08 Tomorrow"

  • Ideal iMovie export settings for iPhone?

    What is the proper setting for iMovie exports to the iPhone?
    Obviously 480x320 is the desired target resolution, but I tried using "Quicktime" and encoding in h.264, but the video is not viewable on the iPhone. Alternatively, in selecting MPEG4, oddly h.264 was greyed out as not an option.
    Anyone? I know the "iPod" settings work, but that is not the ideal iPhone screen resolution.
    blakespot

    I had the same problem getting iMovies over to my AppleTV and found a solution that works for iPhone too.
    In iMovie click: Share>Share...>Quicktime (at top of box)>Expert Settings (under Compress Movie For)>Share (button at bottom of box)>Movie to iPhone (on Export: pick list). Click Save at the bottom of the dialog and you're off!
    I used this to convert several of the movies I had on my AppleTV and put them on my iPhone.

  • Why does it say "verifying phone number" in settings under iMessage? It worked properly in past.

    Why does it say "verifying phone number" in settings under iMessage? It worked properly in past.

    Go to supportprofile.apple.com and remove your device. Alternatively you can call in to apple and have Apple look up your phone number. They may be able to remove it from their end.
    If it does not show up in either of these places, have the people whe own the other iPhone send you a message> this message will be blue for an iMessage> have them push an hold on that message and select the option "send as text"> this should send the message as green> do this two - four time till it starts sending as green on its own.> this should fix it.

  • Some Voice Memos do not sync, Voice Memos tab under iPhone blank

    I have all my iPhone music and videos manually managed, but somehow the voice memos got synced to my iTunes automatically each time I click Sync iPhone under the album "Voice Memos" and artist name "&MyPhoneName" which is fine by me. Is that normal? How to turn it on or off?
    Then I notice that some of the voice memos do not sync, and the Voice Memo tab under iPhone is blank. All the voice memos are still in my iPhone. How does that happen?

    In the music part of your iphone in itunes, uncheck the box for syncing voice memos. Then apply changes. Check that it is all gone on your iphone. Go back to itunes and check the box for voice memos and sync. Itunes would copy the voice memos back to your iphone in the process.
    that worked for me. +Don't forget to update to ios 6 latest, as apple fixed (at least improved) the bug causing wrongly sync music/voice memos not appearing.

  • Okay so when I try to download apps on my phone a totally different Apple ID that I've never used before popped up. I've already tried settings under apps/iTunes and signed into my own apple account. But even doing so my apple Id won't show up

    Okay so when I try to download apps on my phone a totally different Apple ID that I've never used before popped up. I've already tried settings under apps/iTunes and signed into my own apple account. But even doing so my apple Id won't show up

    Try this:
    Open the iTunes app, select the Music tab, then scroll all the way down to the bottom.  Here you can sign out of any current Apple ID and sign into a new one.  Good luck!
    And just in case there is another Apple ID linked to your account you can check at http://appleid.apple.com.

Maybe you are looking for

  • EHP4 Upgrade ABAP+JAVA stack

    Hi SDN Team, We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error, Trouble Ticket Log =============== Trouble

  • Problem in Upgrading to OS 10.2.1

    I am having trouble in upgrading my BlackBerry Q10 from OS 10.2.0 to 10.2.1. I have tried to manually scan for updates through my device  but it said you have the latest Software installed on your device, I then connected my device to the BlackBerry

  • Install peoplesoft on Windows 7!!

    Hi, I have been struggling to make peoplesoft 8.51/HCM9.1 working on windows 7 64-bit, as it has been failing with an error "missing or invalid version of sql library psora (200 0)". When I gone through the various posts on this error I realized that

  • How to disable previously opened and closed apps from opening up again when turning on my mac?

    Since I started using Lion every time I turn on my mac all applications open, how can I prevent this from happening?

  • Integration of client machines into Win2003 DC

    Hi everyone, we have a eDirectory and ZW 7 environment with server based profiles and Windows XP client machines. Everythings just fine at the moment but now we want to integrate the client machines with a newly set up Windows 2003 SP 2 Domain Contro