ALBPM Enterprise SA 5.7 MP3 and Weblogic Express 9.2
We are using ALBPM Enterprise SA 5.7 MP3 and Weblogic Express 9.2. We have the following questions:
1) Why, after assigning a Parametric Role to an user, we have to restart the portal in Weblogic before the user can log back into the system? When we do not do it, the user will see an error on the screen informing of a lack of permisions to visualize the activities of the new assigned role. This happens even when we have already clicked several times on the button labeled "Re-load Information from the Directory" (in ALBPM's WebConsole) and even after a few hours have passed. All our engines have a "Directory Polling Interval" of 1 minute, but it seems not to work.
2) Do we have to modify any extra value, or set something in particular in Weblogic?
Thanks in advance. We look forward for suggestions.
We are using ALBPM Enterprise SA 5.7 MP3 and Weblogic Express 9.2. We have the following questions:
1) Why, after assigning a Parametric Role to an user, we have to restart the portal in Weblogic before the user can log back into the system? When we do not do it, the user will see an error on the screen informing of a lack of permisions to visualize the activities of the new assigned role. This happens even when we have already clicked several times on the button labeled "Re-load Information from the Directory" (in ALBPM's WebConsole) and even after a few hours have passed. All our engines have a "Directory Polling Interval" of 1 minute, but it seems not to work.
2) Do we have to modify any extra value, or set something in particular in Weblogic?
Thanks in advance. We look forward for suggestions.
Similar Messages
-
We are currently using Weblogic Express and trying work with IBM MQ queues without upgrading our Weblogic license.
What are the possible ways of interfacing with IBM MQ using Weblogic Express?
Thanks.Kumar,
MQ is a queuing mechanism whereas Oracle B2B is trading partner integration product. Oracle B2B does support communication over IBM MQ -
https://blogs.oracle.com/oracleb2bgurus/entry/b2b_communication_using_ibm_mq
Let me give you a simple scenario, suppose where a .Net/java application wants to send data to Mainframe or any other ERP system. If application is internal, you may directly publish data to MQ and consumer app will push it to mainframe (if there any).
This could be very well established by integrating Oracle SOA and any Oracle B2B alsoYou will need these products only when the client application is external and you cannot expose your internal servers to the internet/WAN. You will need Oracle B2B only when the incoming message is a business message being sent over a specific transport and exchange and is part of a business process otherwise by just using SOA Suite you can receive the message from client and pass it to the mainframe.
We would need to store the messages to use one of the messaging tool.Oracle B2B and SOA Suite are not just a messaging tool but they form an entire enterprise middleware based on SOA. MQ is just one of the queuing mechanism.
Regards,
Anuj -
Help: Install "WebLogic Express Server" license
I am having problem to install my "WebLogic Express Server" license.
As I understand, the "WebLogic Server" and "WebLogic Express Server" use the same
installation file, the only difference is the license. So I downloaded the "WebLogic
Server 6.0 Service Pack 2" from BEA's web site. After the installation, I found
a "license.bea" file under WebLogic home directory. I replaced this file with
my license file for "WebLogic Express Server". Unfortunately, I can not start
the default server anymore.
Neither the "UpdateLicense" command works: it seems to me that it only merges/replaces
the existing license with the new one. So although I "updated" the "WebLogic Server"
license to "WebLogic Express Server" license using this command, it seems that
I am still using the "WebLogic Server", because I can still see the EJB component
page in the admin console.
Did I miss something? What is the best way to check whether "WebLogic Express
Server" has been sucessfully installed? Your help is highly appreciated!Hi,
Find the Link with the screenshots of the whole installtion and domain creation process for Weblogic in all the ways
Installing Weblogic in GUI mode - weblogicexpert
Installing Weblogic 10.3.6 in console Mode in windows machine - weblogicexpert
Creating Domain In GUI mode - weblogicexpert
Creating Domain in Console Mode - weblogicexpert
Starting Weblogic Admin Server
Starting/Stoping Weblogic Admin Server - weblogicexpert
Starting Weblogic Managed Server
Starting/Stoping Weblogic Managed Server - weblogicexpert
Configuring Node manger
Configuring NODE MANAGER And Starting Managed Server from Console - weblogicexpert
Deployment process
Deployments - weblogicexpert
Security concepts
Security Concepts and Hands on - weblogicexpert
Installing Weblogic 12.1.2
Weblogic 12c - weblogicexpert
All other basic information are available in the blog
Hope it helps -
How to Import Custom Views and JSPs to ALBPM Enterprise
Hi,
I am using ALBPM 5.7. I have developed a custom view in Studio. When I publish and Deploy the Project in ALBPM Enterprise (WebLogic 9.2), I check true the Import Custom JSPs and Views (or similar terminology). But when I login to the portal after installing the EAR, the view is not listed in my work pane.
Also, in one of the Interactive Activity I am calling a JSP, which gives a Null Pointer Exception when execute the instance, In my opinion, the Custom JSP is not deployed.
I have also copied the JSP file in location \bea\ALPBM5.7\j2eewl\webapps\portal\customjsp\
Please suggest as how do I deploy the View and JSP
Thank you,
Regards
Jayant
Edited by jayantbit at 06/19/2008 8:01 AM
Edited by jayantbit at 06/19/2008 8:21 AMHi Mohamed,
Please check below link.
What is Drag and Relate in SAP Business One - YouTube
https://help.sap.com/saphelp_sbo882/helpdata/en/45/100314cf465d7ae10000000a11466f/content.htm
https://help.sap.com/saphelp_sbo882/helpdata/en/45/10ff71cf465d7be10000000a11466f/content.htm
SAP - SAP Business One: Your Solution for Generating Custom Reports
Hope this helps
Regards::::
Atul Chakraborty -
Jbuilder 6 enterprise and weblogic server 6.1 integration problem
hello,
i am using jbuilder 6 enterprise and weblogic server 6.1. i just got a new
workstation and imported my old project from cvs into jbuilder and
everything is fine up to this point.
the application in question is using servlet filters, so i absolutely need
web application version 2.3. it seems, though, that my jbuilder believes for
some reason that only tomcat 4 and borland enterprise server are capable of
using servlet filters. i cannot remember how i fixed this last time around,
but i did somehow. i had a recollection that the jb6_all_001 patch did the
trick, but obviously it didn't this time, at least. what is really annoying
is that the wizard does not allow me to create servlet filters and the
webapp dd editor does not allow me to configure filters, either. of course,
i can edit web.xml manually, but starting the server changes the dtd back to
2.2 and removes everything that is 2.3 specific.
please help me fix this?at the moment it is possible for me to work, though. i worked around the
problem and i set web.xml as a read only file. i still can't use wizards to
create servlets and i can't edit web.xml with jbuilder. -
Scope of ALBPM Studio and ALBPM Enterprise Server
Hi
I have some simple questions about ALBPM Enterprise Server:
it is really necessary to have this component in a production environment?.
For example, if a company is very small with 10 or 15 employees and you have only 2 processes in the company, ALBPM Studio is not enough to execute and to administrate these processes?
What are the problems that I would have if I decided to set up a production environment only with ALBPM Studio?
What things I could not do if I will not have the Enterprise Server?
How many users simultaneosly support the ALBPM Studio in a testing environment?
Thank you so much...Hi,
The short answer is 'yes', you'll need an Enterprise server. Here are some of the issues with using Studio:
Functionality:
You can't do everything you can do in the Enterprise server in the Studio engine. However, whether this is an issue would depend on the complexity of your processes/requirements. For example, the Studio engine doesn't support the versioning of processes.
Licensing:
I don't know for sure, but I doubt the ALBPM licensing allows for Studio to be used in 'production'.
Runtime
The Studio engine can't be isolated from the Studio application. So you'd always have to make sure someone had studio running on a PC somewhere.
Users
You are limited to 5 concurrent users in Studio.
There did actually used to be a copy of the Engine that was aimed at small scale deployments called 'Express' (I think), but it disappeared a while back.
Hope this helps,
Tim -
Error while configuring the directory in ALBPM Enterprise 6.0 WL edition
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
DeepakDeepak:
Could you please check the info on
http://tracker.fuegolabs.com/browse/EAP-985
HTH
Nico
Deepak Vinod Kumar wrote:
Hi,
We have installed ALBPM Enterprise 6.0 for Weblogic edition to deploy ALBPM processes into Enterprise 6.0. I tried to configure directory through ALBPM admin center.
I have checked the below options and provided necessary information asked in the series of dialog boxes.
- Create Directory Service
- Create Process engine
- Create ALBPM application EARs
- BEA Weblogic Configuration
We get error in the last step (BEA weblogic configuration) stating that there is some problem in executing the WLST script:-
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\14360\.configWizard\tmp\config.py", line 640, in ?
NameError: engineType
We tried to deploy the ALBPM application EARs manually to weblogic. But there are lot of dependencies, so we couldn't successfuly deploy them.
Appreciate any help on resolving the WLST error.
Thanks in advance
Deepak -
Integrate LDAP with ALBPM Enterprise
hi,
Did anyone tried to integrate LDAP with ALBPM Enterprise?
If using LDAP for creating directory, will it create a new schema in LDAP?
If need to make use of existing LDAP schema, how can we do it?
Need HELP!!!
ThanksHi Jasmine,
Here are the choices you have for your Directory Service in ALBPM 6.0 Enterprise Standalone (I pulled them off of http://portal.plumtree.com/portal/server.pt?open=512&objID=3422&&PageID=5325&mode=2&in_high_userid=573417&cached=true).
Sorry - I don't see "Open LDAP" in the list.
Single Source JNDI Plugins: Sun ONE Java System Directory Server 5.2 (JNDI), MS Active Directory 2003 (JNDI). (Deprecated - they cannot be created any more); Single Source JDBC Plugins: Oracle 9i and 10g, MS SQLServer 2005, IBM DB2 UDB 8.2 and 9.1 using DataDirect JDBC Drivers 3.6; Sybase ASE 15.0.2 will be supported in ALBPM 6.1; Hybrid Plugins: Sun ONE System Directory Server 5.2 and Oracle 9i, Sun ONE System Directory Server 5.2 and Oracle 10g, MS Active Directory 2003 and Oracle 9i, MS Active Directory 2003 and Oracle 10g, MS Active Directory 2003 and MS SQL Server 2005, Sun ONE System Directory Server 5.2 and IBM DB2 8.2 or 9.1
hth,
Dan -
Problem with a web service with Jbuilder 2005 and Weblogic 8.1
Hi,
i�m trying to create a web-service using Jbuilder 2005 Enterprise and Weblogic 8.1. It is a very simple web-service, come kinda "Hello World".
In the last step, after deploying my "ApplicatioModule1", i get this error:
"Unable to connect to server t3://localhost:7001 as user weblogic.
Reason: javax.naming.CommunicationException. Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:199)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:125)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:291)
at weblogic.jndi.Environment.getContext(Environment.java:164)
at weblogic.jndi.Environment.getInitialContext(Environment.java:143)
at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(MBeanHomeTool.java:157)
at weblogic.Deployer.runBody(Deployer.java:555)
at weblogic.utils.compiler.Tool.run(Tool.java:146)
at weblogic.utils.compiler.Tool.run(Tool.java:103)
at weblogic.Deployer.main(Deployer.java:399)
Check option -adminurl, -username and -password. "
I dont know why i get this error. I think the weblogic server is properly configured and running.
Anybody can help me?? Thx.i have found the solution to the problem myself. I only had to execute this command file startWebLogic.cmd which is placed in this default installation directory C:\bea\user_projects\domains\mydomain in order to put the server listening to ports.
i hope anybody with the same problem could fix it by reading this post. -
This blog post provides a suggested methodology for helping users of VMware vROps/vCOps decide which of the existing solutions, the vROps Management Pack for Oracle EM and the VMware vROps Hyperic Plugins for Oracle, should be used to monitor their Oracle workloads.
It’s been a nearly a year since VMware transferred the vCOps Adapter for Oracle Enterprise Manager (OEM) to Blue Medora and since that transfer Blue Medora has released a number of major updates as well as rebranded it the Blue Medora vROps Management Pack for Oracle EM. Over that same period of time VMware has continued to evolve their Oracle-focused (Oracle Database and WebLogic J2EE) Hyperic agent-based plugins culminating most recently with a October 2014 update to the Oracle Database plugin that provides support for Oracle Database 12c.
vROps for Oracle Database - Management Pack vs Hyperic comparison
Read the rest here.can you also post 28,000 more lines? I'm sure this will be helpful....
-
Websphere and weblogic version
hi everybody,
Can anyone please say me the free version of websphere and weblogic that supports the
oracle waveset/sunIDM8.1version.
Please anyone help me out from this issue.
Thanks,
Tarun.From: http://docs.oracle.com/cd/E19225-01/820-5592/820-5592.pdf
Here are the supported application servers that can be used with Sun IDM 8.1 (see below).
Of course, instead of Sun IDM 8.1 you should utilize Oracle Waveset 8.1.1 and then apply the latest patch, which is 8.1.1.8. This is the latest possible version and contains all possible fixes and enhancements.
Note: If you run the latest patch version of Sun IDM 8.1 (8.1.0.15) it also supports (from the 8.1.0.15 Rel Notes):
IBM WebSphere 7.x application server can now be used with Identity
Manager. (ID-13555125) 8.1.0.15
If you have any additional questions please let me know.
==========
Application Servers
The application server you use with Identity Manager must be Servlet 2.2-compliant and
installed with the included Java platform (unless noted as follows). Identity Manager requires
Java SE Development Kit (JDK) 5 or 6 on the following application servers, if the application
server supports these versions.
■
Apache Tomcat 5.5.x, 6.0.x
■
BEA WebLogic Server 9.1, 9.2, 10
■
IBM WebSphere 6.1
■
JBoss Application Server 4.2
■
Oracle® Application Server Enterprise Edition 10g Release 3 (10.1.3)
■
Oracle Application Server Standard Edition 10g Release 3 (10.1.3)
■
Sun Java
TM
System Application Server 9.1 (GlassFish
TM
v2 UR1, v2 UR2, v2.1 32-bit and
64-bit)
■
Sun Java System Application Server Platform Edition 8.1, 8.2, 9.0
■
Sun Java System Application Server Enterprise Edition 8.1, 8.2
■
Sun Java System Application Server Standard Edition 8.2
Note–
■
If your current application server does not support JDK 5, please check with your vendor to
examine the implications of upgrading to one that does before installing Identity Manager.
■
Identity Manager requires a JDK that correctly handles the 2007 adjustments to U.S.
Daylight Savings Time (DST). You must install any relevant DST patches for the JDK
version you are using. For Sun JDK 5, Update 15 contains the necessary DST fixes. All
versions of Sun JDK 6 contain the necessary DST fixes.
■
You can run Identity Manager on BEA WebLogic application servers with all
WebLogic-supported 5 JDKs.
========== -
Visualage and weblogic !!!
Hi ,
I was wondering if there is someone who has used these two products
namely Visualage and Weblogic together.
Regards
Suchak JaniWe integrate with the Professional version of VAge which doesn't support JSPs.
Their Enterprise version does, but is tightly coupled to WebSphere and an
earlier release of the JSP spec.
You can do debugging of JSPs in VAge but you'll need to convert them to java
servlets first (use weblogic.jspc, see the JSP documentation.
-dana
suchak wrote:
>
Dana ,
Please could you tell us about JSP's within the integration of VAge 2.0 and
WebLogic 4.5.1.
Regards
Suchak Jani
"suchak" <[email protected]> wrote in message
news:8f6fug$baa$[email protected]..
Hi Dana ,
Thank you for your reply !
I have a question though ...
BEA currently provides a integration with VAge 2.0 and WebLogic 4.5.1.This Integration , does it incude JSP's ??
Regards
Suchak Jani
"Dana Jeffries" <[email protected]> wrote in message
news:[email protected]..
BEA currently provides a integration with VAge 2.0 and WebLogic 4.5.1.
We're getting ready to beta the VAge 3.02 Integration Kit for WebLogic5.1.0.
The beta should be available around the middle of the month. Check out
weblogic.beta.tools.visualage for a notice of the release.
Dana Jeffries
BEA WebLogic Engineering
suchak wrote:
Hi ,
I was wondering if there is someone who has used these two products
namely Visualage and Weblogic together.
Regards
Suchak Jani -
Differences between Weblogic Server and Weblogic Server Suite?
Hi
What is the differences between Weblogic Server and Weblogic Server Suite, beside licens costs?
Regards
/MartinWebLogic server standard edition, you get the WebLogic with no clustering.
Clustering is available in the WebLogic Enterprise Edition.
The WebLogic Suite also gives you Coherence and JRockit real-time
A desciption of the various products can be found here: http://www.oracle.com/us/products/middleware/application-server/index.html -
When you deploy a project in ALBPM enterprise for WAS how do you get to the workspace like you see when you click the blue button in Studio versions toolbar? Stupid question but I need to see the audit trail.
Hi,
Please correct me if I am not following you.
You want to log into the workspace to do the task after deployment into the enterprise server as you did in your studio. If this is your problem then invoke the workspace by using the following URL
if you are in ALBPM 6.0/10g R3 then: http:/<server ip address>:<port no>/workspace
Example: http://localhost:8686/workspace/faces/jsf/workspace/workspace.xhtml
If you are in ALBPM 5.7: http:/<server ip address>:<port no>/portal
To view a work item's audit trail in 5.7:
1) To view details about a work item, in the right pane, click in the Description column for the work item.
2) In the Task toolbar, click the Audit Trail button. The Audit Trail dialog box opens and displays information about each of the activities for the work item.
3) To expand an activity, in the Activity column, click the minus icon for the activity.
Hope this help you.
Bibhu
Edited by: Bibhuti Bhusan on Aug 24, 2010 9:10 PM -
Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3
Hello,
I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
Please guide me to resolve the problem.
C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
Do you wish to run the CRS evaluation installation? [Y/N]: y
Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
The CRS evaluation install will attempt to create the database. Press [Return] t
o continue or any other key to quit:
Enter mysql database connection details
Enter user name: admin
Enter user password: admin
Enter database name: crsprod
Enter 'root' user password:
Creating database...
Finished database creation
Enter weblogic admin server URL: http://localhost:7001
Enter weblogic admin server username: weblogic
Enter weblogic admin server password: weblogic123
Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
all:
[copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
[delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
cim.tmp
BUILD SUCCESSFUL
Total time: 0 seconds
Application Server: weblogic
The following installed ATG components are being used to launch:
ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
Nucleus running
atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
(Searching for products... done.)
atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
atg.cim.productconfig.appserver.AppServerSelectTask starting...
atg.cim.productconfig.appserver.AppServerSelectTask finished.
atg.cim.productconfig.appserver.AppServerPathTask starting...
atg.cim.productconfig.appserver.AppServerPathTask finished.
atg.cim.productconfig.appserver.DomainPathTask starting...
atg.cim.productconfig.appserver.DomainPathTask finished.
atg.cim.productconfig.appserver.UrlTask starting...
atg.cim.productconfig.appserver.UrlTask finished.
atg.cim.productconfig.appserver.UsernameTask starting...
atg.cim.productconfig.appserver.UsernameTask finished.
atg.cim.productconfig.appserver.PasswordTask starting...
atg.cim.productconfig.appserver.PasswordTask finished.
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
atg.cim.database.CreateSchemaTask starting...
atg.cim.database.CreateSchemaTask finished.
atg.cim.database.ImportDataTask starting...
Combining template tasks...Success
Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
/CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
icing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
oreRepository
/CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
catalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
ce/pricing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
pository
/CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
iteRepository
/CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
atalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
pository
/CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
ts/Giftlists
/CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
entory/InventoryRepository
/CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
ofileAdapterRepository
/CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
OrderRepository
/CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
rder/OrderRepository
/CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
tores/StoreRepository
/CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
e/claimable/ClaimableRepository
... > Success
All Imports Completed Successfully
atg.cim.database.ImportDataTask finished.
atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
atg.cim.productconfig.appassembly.EarFileNameTask starting...
atg.cim.productconfig.appassembly.EarFileNameTask finished.
atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
Error Executing Batch File
atg.cim.worker.TaskException: Error deploying to weblogic
atg.cim.worker.TaskException: Error exececuting batch file
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
130)
at atg.cim.Launcher.startCimFlow(Launcher.java:278)
at atg.cim.Launcher.main(Launcher.java:99)
Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
at atg.cim.worker.Task.handleException(Task.java:72)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:159)
at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
pl.java:150)
at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
(HeadlessExecutorImpl.java:140)
at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
tchChooserExecutor.java:169)
at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
120)
... 2 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
red while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
utionWrapper.java:167)
at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:155)
... 7 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 20 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
1
at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 34 more
Nucleus shutting down
Nucleus shutdown complete
Thanks.This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
http://localhost:7001 instead of t3://localhost:7001
Thanks.
Maybe you are looking for
-
I have a spreadsheet that a column can only contains 30 characters, how can I easily make numbers either identify those over 30 characters or chop off the extra ones?
-
Hi Experts, I have a requirement like I have to create the MI applications in English as well as in Hindi (an Indian language). The application is ready, now I have to upgrade it to support Hindi language only, mainly the labels and hard-coded text s
-
11.2.0.3 impdp table_exist_action question
Hi everyone, Need some help with my question about table_exist_action. My expdp is normally done as: full=y contents=all. My impdp is normally done as: full=y contents=all (OR) schemas=xxxx contents=all I've been reading about table_exist_action para
-
some time ago I installed firefox version 5 but I had problems with my Norton anti-virus, now once again use the version 3.6.18. in principle, this problem with the email had not occurred, it is now more than a month that the problem has occurred wit
-
how do i convert a binary number to a decimal number using Jbuttons and Jlabel for the output? the binary number should be entered into a Jtextfield thank you