Album art does not match the song after iOS 5 upgrade

The subject pretty much speaks for itself

I think I figured it out: Connect your ipad/iphone to your iTunes PC/MAC. In iTunes, click on the iPad/iPhone. On the "Summary" tab for your device (in iTunes), select "Sync with this iPad/iPhone over Wi-Fi". On your iPad/iphone go to "Settings", then "General". Toward the bottom you'll see "iTunes Wi-Fi Sync". Select it. Select the "Sync Now" option. It's the only option. iTunes should start syncing the missing album covers.
I'm doing this as I'm writing this. Good luck!

Similar Messages

My album artwork does not match the song in my playlists

After making playlists with music purchased from itunes in my music app, the art work does not match the title of the song / album. How can I fix this problem?

Hi freezerman84,
Thanks for the question. I understand you are experiencing issues with Album Artwork on your iPhone 5. To troubleshoot this issue, it may be best to completely resync your iPhone with iTunes. To do so, uncheck the "Sync Music" checkbox, and apply the changes (so there is ultimately no music syncing to your iPhone).
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, it may be necessary to restore your iPhone:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Additional information:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
Thanks,
Matt M.

HT201412 my ipod touch is randomly playing songs on its own. i cannot choose the song I want to hear it continuosly skips several songs and then suddenly plays it. also the album cover does not match the song playing

My ipod touch is randomly playing songs on its own. It skips several songs then suddenly stops and plays that song. If i try to select a song it will not play that song it keeps skipping over severla songs at a time then plays again. The album covers do not match that song that is playing and now its not connected to wifi. I need help

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Album art does not match artist

About 50% of the album art does not match the artist titles on the iPod. In iTunes they are fine. I've reset and resynced. Any ideas?
thanks

If your iPod is set to update automatically then try this:
iTunes 6
1. Connect your iPod
2. Disable "Show Album art" in iTunes>Edit>Preferences>iPod.
3. Syncronise the iPod with iTunes. (Disconnecting and then reconnecting your iPod will do the trick)
4. Re-enable "Show Album Art" in iTunes>Edit>Preferences>iPod.
5. Syncronise the iPod again.
iTunes 7
1. Connect your iPod
2. Disable "Display album artwork" in iPod>Music tab and click Apply.
3. Syncronise the iPod with iTunes.
4. Re-enable "Display album artwork" in iPod>Music tab and click Apply.
5. Syncronise the iPod again.

IPod album art does not match song

Whenever I play songs on my iPod the album art is messed up. The art does not show up with the correct song and I don't know what to do. I have checked and all of the album art is correct on the computer. I don't know what is wrong with my iPod and I would like to be able to solve this problem without having to send my iPod out to Apple. Any advice would be helpful. Thank you.

If you have an iTunes store account, you can use the "get album artwork" option in iTunes. You don't actually need to purchase anything from the iTunes store, just to have or create an account. Provided that the album or song for which you are looking to add artwork is available for sale in the store, iTunes will find it and add it to your library.
If you go to preferences/general in iTunes and check the box marked "automatically download missing album artwork", it will automatically add the artwork when you import a CD into iTunes.
One downside to this is that if you have an album or song misspelled in your iTunes library, it may not be found by iTunes because it will be looking for a match.
See: How to add artwork using iTunes.
If you don't have an account or don't want to create one, here are a couple of other methods.
First off, make sure you have "show album art" enabled in iPod options.
Highlight a song or album in iTunes, then right click on it and select the "get album artwork" option.  Go to Google Image Search and type in the artist/album name and click on search images.   Double click on a picture you like, then at the top of that page click on "see full size image".   When you get that image, simply copy/paste it into the space for album artwork in iTunes.   Make sure you select the album in the browser of iTunes before you copy/paste.   You'd be surprised what Google Images can bring up. There are literally millions, and even obscure album artwork can be found.
In the unlikely event that Google can’t find an image, you can also get artwork from Amazon.
If you’re happy using images from Amazon, and don’t want to copy/paste, then iTunes Art Importer is a nice free program to do it for you.

Album art does not correspond with song

My album art doesnt correspon with my song example: life in the fast lane b van halen instead of the Eagles!! How can i fix? Any info would help. Thanks.

I had the same problem and the only thing I could get to work was to erase everything on the ipod and reload it back from itunes. First I had to put all ipod files on my hard drive, clean out itunes and reload the saved files back to itunes and then back on the ipod. I think 1 of the songs has a bad id3 tag that messed it up. But after clearing everything out and then reloading it fixed it. Good luck

Album art does not match songs after syncing iPhone on new iTunes

Hi,
I recently updated my iTunes to version 11.1.12. After doing so, I soon realized that the album art for my songs does not transfer to my iPhone correctly. On iTunes the album art for each song is matched correctly, but when I sync it to my phone, my phone displays artwork for other songs. So when I have song 1 and song 2, the album art for song 1 is tagged with song 2 on my iPhone...i'm very frustrated and have tried everything but a hard reset which i'm REALLY hoping I don't have to do.
HELP HELP HELP!!

I've had this same problem a couple times. First time I didn't have a clue as to cause but fixed it by unsyncing all music (removing it from phone) and resyncing it back on. This latest time the miss matched artwork occurred on albums I bought on my iPad and then sync'd to my computer and then to my iPhone. Artwork is fine on the iPad and computer (iTunes 10.0.1.22 on XP machine). Artwork shows as other albums for only new purchased albums from iPad. I haven't had time to do the unsyncing and resyncing but will do it this soon and report in to verify that it worked (or didn't). I'm hoping the artwork the iTunes couldn't find, and I did from various places on the net, will be there when I resync the music.

Album art does not display on iPod after sync with iTunes

I synced my 1G iPod nano to the new iTunes 7, and it did not seem to fully sync my iPod. I downloaded some album art onto some songs and they dont display on my iPod nano. Does anyone have the same problem as I do? Much help would be appreciated

I was hoping I could find the answer here. I have a 60GB Video and before v7 about 30% of my albums had art that I found and attached myself, they showed up on my iPod. With v7 I chose for iTunes to get my album art and it did, all of my songs had corresponding art to go with it, when I plugged in my iPod to sync last night I just let it run because there are so many. This morning I get my iPod and I play a song, nothing, then another and another and still no art but when I open iTunes, I see the album art. What gives?

Album art does not match songs after I-phone 3GS upgrade to IOS 5.0.1

How do I correct this mismatch without losing all my content on iphone 3gs?

Updating to iOS 5
http://support.apple.com/kb/HT4972
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Art does not match Song/Artist

I sync my iPod with the home computer. Today at work it was running low on battery so I conected it to the office computer (not the same as home) just to charge, obviously not sync. I have done this several times with no issues afterwards.
After it charged, I disconnected and started using and noticed that the art displayed did not match the song. I played several songs and the same problem. I tried a soft reset, did not work.
Any ideas? Thanks!!!

I can't promise this is going to work, but you can give it a try.
1. In iTunes, select your Ipod under Devices.
2. In the Music tab, clear the Display album artwork on your iPod, and then click Apply.
3. Reselect the check box and click Apply.
This worked for me when the artwork stopped displaying.
Good Luck,
30 GB Windows XP

When I copy an artist over to itunes and that particular album has multiple albums, it does not separate the albums but lines up all of the songs...such as all the 1's..then 2's and so on. How do I fix that?s

when I copy an artist over to itunes and that particular album has multiple albums, it does not separate the albums but lines up all of the songs...such as all the 1's..then 2's and so on. How do I fix that?

JPSchrader wrote:
when I copy an artist over to itunes and that particular album has multiple albums...
Should that read "when I copy an artist over to itunes and that particular artist has multiple albums," because if not, I don't understand?
If I'm right about that, I'm still not really clear at all about what you're doing. Where are you importing these songs and albums from? Is it existing songs files and if so, what format are they in?

The free space for my iphone on itunes does not match the free space on my iphone after syncing.

The free space for my iphone on itunes does not match the free space on my iphone after syncing. iTunes shows 6.7 G free, but my iphone shows 6 G free. Why such a delta?

They've never sussed this out - been a problem the last year or two for me regardless of all the new iOS versions and iTunes versions. Regardless of multiple resets and full restores. Mine showed 3.7 avail on computer, less than .5 on phone. I did a reset and full restore. It helped - but still differs dramatically - now showing 5.8 avail on computer but only 2.9 on phone.
APPLE!!! I have spent 10s of thousands on your products both at my business and home - why? "Because it just works" I've been telling people. Not sure if I can keep on saying that if you don't get this figured out!!

Album Art does not show up when using shuffle.

When I turn on shuffle in my 80gb Classic the album art does not show up.
It is about 50/50 some songs will show art and some will not. The art that did not show up the last time I shuffled will show up this time. It is not consistant. When I am not in shuffle the art always shows up just fine.
Anyone having this problem? Any ideas on how to stop this from happening? Thanks, Robert

You might also recreate your iTunes library on your computer... and then when you connect your iPod you should be presented with a dialogue asking you to erase & sync the iPod. Click the erase & sync button (provided your songs are still in iTunes).
Here's how to recreate your library:
http://support.apple.com/kb/HT1451
CG

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Album art does not match the song after iOS 5 upgrade

Similar Messages

Maybe you are looking for