Album Art, Small image displays, Large does not
I have been adding album art to my tracks, and all looks good in iTunes, and they were syncing to my iPod with no problems...However, I noticed today, that when playing a track, the small album art appears fine....if I click the center of the click wheel twice, to get the "full screen" album art...I get a blank square! Any ideas???
Perhaps my album art is too big? (I have been using 300x300, I thought this was appropriate).
ipod G5 Windows XP
Just happened to me. No large artwork, only small. I unchecked 'display artwork', 'apply' and then checked it again, 'apply'. I saw a hopeful sign that the iPod was "optimizing artwork". But that sequence quit with a -50 error.
I have almost 80G of music stored on there from my collection. And Apple doesn't ALLOW you to transfer it over to your hard drive. This is my own purchased music. If I have to reset the whole thing, what do I do?
Similar Messages
-
Album Art doesn't display in all cd in the Zen Visio
Album art doesn't display in all cd in the Zen Vison M . I have 649 cd and most of them display correct on ZEN Vision M. But some doesn't , I try to delete de Cd and rip it again and add the album art it didn't work for some reason some of the albums does not dipslay. The album art shows in Zen Explorer but not on the Zen vision M. Do you know why. I also try to get the Cover enlarge 200x200 or larger 500x500 but still odesn't work please any help. I had read all the suggestion in the forum also and follow suggestion but it doesn't work.
Take Care
AussieDogIf you select multiple songs and choose Get Info, the Album Art box will always be blank, even if the individual songs each have the same common Art. This is expected behavior.
Copying the Art directly to the iPod will never work. If your iTunes displays the Art fine, and the nano doesn't, your problem is likely to be a firmware issue with the iPod. I would suggest performing a "restore" and then try again. Otherwise, if issues remain, reinstall iTunes if more than one XP user is affected. -
I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab
Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!
-
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.
Adobe - Lightroom : For Macintosh
Hal -
Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this
Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler -
Display Preferences does not detect dual monitors
Display Preferences does not detect dual monitors.
There is no workaround here.
Only a prompt update from apple will solve this.
Any level 5 geniuses I welcome your guidance... please prove me otherwise.
thanks
--MarconiHi marconi de baloni,
Thanks for the question. Based on what you stated, it seems like the computer is not recognizing a second display. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
OS X Yosemite: Connect multiple displays to your Mac
If a display is not recognized, choose Apple menu > System Preferences on the primary Mac, click Displays, then click Display.
Open the Display pane for me
Then click the Detect Displays button.
You can also try putting your Mac to sleep and then waking it.
Thanks for using Apple Support Communities.
Cheers,
Mario -
How do you delete the images in the Iphone images album. Not the camera roll. There is an album called Iphone images and there is not a delete option
The same way you put them on the phone. Connect the phone to iTunes on your computer, click on the name of the iPhone, then the Photo tab. Uncheck the albums you don't want on the phone and click Sync.
-
E18 - "Your display server does not support XComposite..."
I used e17 quite a bit, but since it was upgraded to e18, I've run into this problem.
ESTART: 0.00000 [0.00000] - Begin Startup
ESTART: 0.00004 [0.00004] - Signal Trap
ESTART: 0.00004 [0.00000] - Signal Trap Done
ESTART: 0.00005 [0.00001] - Eina Init
ESTART: 0.00019 [0.00013] - Eina Init Done
ESTART: 0.00019 [0.00000] - Determine Prefix
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:25^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:26^[[0m Enlightenment relocation handling
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:27^[[0m =================================
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:28^[[0m PREFIX: /usr
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:29^[[0m BINDIR: /usr/bin
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:30^[[0m LIBDIR: /usr/lib
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:31^[[0m DATADIR: /usr/share/enlightenment
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:32^[[0m LOCALE: /usr/share/locale
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_prefix.c:33^[[0m =================================
ESTART: 0.00027 [0.00009] - Determine Prefix Done
ESTART: 0.00034 [0.00007] - Environment Variables
ESTART: 0.00036 [0.00001] - Environment Variables Done
ESTART: 0.00036 [0.00000] - Parse Arguments
ESTART: 0.00037 [0.00001] - Parse Arguments Done
ESTART: 0.00037 [0.00001] - Eet Init
ESTART: 0.00163 [0.00126] - Eet Init Done
ESTART: 0.00164 [0.00001] - Ecore Init
ESTART: 0.00512 [0.00348] - Ecore Init Done
ESTART: 0.00514 [0.00001] - EIO Init
ESTART: 0.00516 [0.00002] - EIO Init Done
ESTART: 0.00517 [0.00001] - Ecore Event Handlers
ESTART: 0.00517 [0.00001] - Ecore Event Handlers Done
ESTART: 0.00518 [0.00000] - Ecore_File Init
ESTART: 0.00566 [0.00049] - Ecore_File Init Done
ESTART: 0.00567 [0.00001] - Ecore_Con Init
ESTART: 0.00567 [0.00000] - Ecore_Con Init Done
ESTART: 0.00568 [0.00000] - Ecore_Ipc Init
ESTART: 0.00569 [0.00001] - Ecore_Ipc Init Done
ESTART: 0.00569 [0.00001] - Ecore_X Init
ESTART: 0.00958 [0.00388] - Ecore_X Init Done
ESTART: 0.00959 [0.00002] - Ecore_Evas Init
ESTART: 0.00978 [0.00018] - Ecore_Evas Init Done
ESTART: 0.00978 [0.00001] - Elementary Init
ESTART: 0.01301 [0.00323] - Elementary Init Done
ESTART: 0.01302 [0.00001] - Emotion Init
ESTART: 0.01645 [0.00344] - Emotion Init Done
ESTART: 0.01646 [0.00001] - Ecore_Evas Engine Check
ESTART: 0.01647 [0.00001] - Ecore_Evas Engine Check Done
ESTART: 0.01648 [0.00000] - Edje Init
ESTART: 0.01648 [0.00001] - Edje Init Done
ESTART: 0.01649 [0.00001] - E Intl Init
ESTART: 0.01650 [0.00002] - E Intl Init Done
ESTART: 0.01651 [0.00001] - E_Alert Init
ESTART: 0.01651 [0.00000] - E_Alert Init Done
ESTART: 0.01652 [0.00000] - E_Hints Init
ESTART: 0.01683 [0.00031] - E_Hints Init Done
ESTART: 0.01683 [0.00001] - E_Configure Init
ESTART: 0.01687 [0.00003] - E_Configure Init Done
ESTART: 0.01687 [0.00000] - E Directories Init
ESTART: 0.01695 [0.00008] - E Directories Init Done
ESTART: 0.01696 [0.00001] - E_Filereg Init
ESTART: 0.01696 [0.00001] - E_Filereg Init Done
ESTART: 0.01696 [0.00000] - E_Config Init
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1223^[[0m Performing config upgrade for 1.12
^[[32;1mINF<^[[0me^[[32;1m>^[[0me_config.c:1244^[[0m Performing config upgrade for 1.13
ESTART: 0.01766 [0.00070] - E_Config Init Done
ESTART: 0.01767 [0.00001] - E_Randr Init
E_RANDR CONFIG RESTORE
Calculated Screen Size: 1920 1080
ESTART: 0.01850 [0.00083] - E_Randr Init Done
ESTART: 0.01850 [0.00001] - E_Xinerama Init
ESTART: 0.01851 [0.00001] - E_Xinerama Init Done
ESTART: 0.01851 [0.00000] - E_Env Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01851 [0.00001] - E_Env Init Done
ESTART: 0.01852 [0.00001] - E_Scale Init
ESTART: 0.01853 [0.00001] - E_Scale Init Done
ESTART: 0.01854 [0.00000] - E_Pointer Init
ESTART: 0.01854 [0.00001] - E_Pointer Init Done
ESTART: 0.01855 [0.00001] - E Paths Init
ESTART: 0.01856 [0.00001] - E Paths Init Done
ESTART: 0.01857 [0.00001] - E_Ipc Init
ESTART: 0.01864 [0.00007] - E_Ipc Init Done
ESTART: 0.01864 [0.00001] - E_Font Init
ESTART: 0.01865 [0.00001] - E_Font Init Done
ESTART: 0.01865 [0.00000] - E_Font Apply
ESTART: 0.01866 [0.00001] - E_Font Apply Done
ESTART: 0.01866 [0.00000] - E_Canvas Recache
ESTART: 0.01867 [0.00001] - E_Canvas Recache Done
ESTART: 0.01868 [0.00000] - E_Theme Init
ESTART: 0.01870 [0.00002] - E_Theme Init Done
ESTART: 0.01870 [0.00001] - E_Moveresize Init
ESTART: 0.01871 [0.00001] - E_Moveresize Init Done
ESTART: 0.01871 [0.00000] - Efreet Init
ESTART: 0.01980 [0.00109] - Efreet Init Done
ESTART: 0.01981 [0.00001] - E_Intl Post Init
ESTART: 0.02764 [0.00783] - E_Intl Post Init Done
ESTART: 0.02766 [0.00002] - E_Actions Init
ESTART: 0.02800 [0.00034] - E_Actions Init Done
ESTART: 0.02801 [0.00001] - Screens Init
ESTART: 0.02801 [0.00001] - screens: atoms
ESTART: 0.02820 [0.00019] - screens: manager
ESTART: 0.02822 [0.00002] - screens: container
ESTART: 0.02823 [0.00001] - screens: zone
ESTART: 0.02824 [0.00001] - screens: desk
ESTART: 0.02824 [0.00001] - screens: menu
ESTART: 0.02826 [0.00002] - screens: exehist
ESTART: 0.02827 [0.00001] - screens: get roots
ESTART: 0.02828 [0.00001] - screens: focus
ESTART: 0.02828 [0.00001] - screens: border
ESTART: 0.02830 [0.00002] - E_Comp Init
<<<< Enlightenment Error >>>>
Your display server does not support XComposite, or Ecore-X was built without XComposite support. Note that for composite support you will also need XRender and XFixes support in X11 and Ecore.
<<<< Enlightenment Error >>>>
Enlightenment cannot setup compositing.
E18: Begin Shutdown Procedure!
^[[31mERR<^[[0mefreet_cache^[[31m>^[[0mlib/efreet/efreet_cache.c:1108^[[0m org.enlightenment.DBus.Canceled Canceled by user.
E - PID=849, valgrind=0
Apparently ever since they upgraded from e17 to e18, they now require XComposite. I'm using the default package through pacman. Pacman installed all the required packages it apparently needs. I've tried uninstalling e18 completely and reinstalling which didn't work. When I do a pacman search for XComposite, E-core-X and XRender, the updated libraries show up.
Do I need to build every package from scratch just to get this to work? Or is there an easier way? I tried googling the problem, but only four sites came up with three being .c code. The other didn't offer any real help.
Thank you in advance for any help.Scimmia wrote:hmm, 1.9.3-1 was just released, but 1.9.2-1 should work just fine. Anything custom in your X setup? How about trying a clean configuration (rename ~/.e and let E recreate it)?
There's nothing custom in my X setup. I've tried deleting the .e folder but still no luck. I'm not sure if it helps, but here's my xorg.conf file. I'm also using the closed source NVIDIA drivers if that matters.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VE258"
HorizSync 24.0 - 83.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Ancor Communications Inc ASUS VW224"
HorizSync 30.0 - 85.0
VertRefresh 55.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 550 Ti"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x90$
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection -
Album Art on Most Music Files Do Not Display after 9.2 Upgrade
I downloaded and installed the 9.2 upgrade for iTunes on my Windows 7 laptop. Nearly all of the music files no longer display the album art. When I try editing the files to change or restore the art, nothing happens or the program stops responding.
Is there a fix for these and other problems on the way, or how do I go back to 9.1?You may want to follow this thread of users experiencing similar issues.
http://discussions.apple.com/message.jspa?messageID=11699285
No workaround or fix has been found yet. -
Album art is showing in itunes but not on my ipod
I have a new 60GB ipod video and am having a problem with album artwork. It shows in all the right windows in itunes but not on the ipod itself.
The problem is affecting random songs (singles and odd album tracks) and is not as a result of any software updates.
I have tried unchecking and rechecking the 'display album art' option in preferences, deleting and reinserting the covers and even deleting and reimporting the affected songs from scratch. So far nothing has worked and I don't know what else to do!
Any suggestions?
Apple iBook G4 Mac OS X (10.4.3) ipod 60GB with videoThanks but still no luck I'm afraid.
To update: I have been using itunes 6 from the outset and have always manually updated the ipod - it has never even been switched to automatic as I changed this at the start (advice from a friend). File formats for the affected tracks are all either AIFF or Apple Lossless - same as all the unaffected tracks.
The even stranger thing is that artwork for some albums, where all the tracks were imported manually at the same time, shows for some tracks on the ipod and not others. The artwork does, however, show for all of the tracks on the ipod when viewed through itunes! -
My findings -- Album art shown in iTunes 7 but not in iPod
Well, after several round of testings, here's my conclusion:
For song in iTunes library, i can change the album art and upload the song to iPod. The album art shows in iPod and stays...however if i decided to change the album art later for the same song by directly dragging the album art to song info box in iPod, the updated album art displays in iTunes BUT not in iPod, in fact NO ALBUM ART is displayed at all...even though how many times i check/uncheck the DISPLAY ALBUM ART box.
The only way to change the album art again is to drag the new album art to the song in my iTunes library and later drag that song again to iPod.
As a summary, it DOES NOT allow me to add or change any album art directy to songs stored in iPod. The only workaround is have the exact copies of songs stored in iTunes library and do auto sync.
For me this is totally not flexible as in order to save hard drive space, i believe most of us will store songs in Ipod and remove them from iTunes library (correct me if i am wrong). And all we can do is wait til the next release of firmware from Apple.........
Hello Apple, r u listening out there!?!?!
BTW, i am using iTunes 7 and iPod 5G 60GB 1.2 firmware.phewww. Been going crazy, thinking i waas the only one with this problem. It was never a problem with 6.5.
and yes, we all dont save tracks in the media library. i have never even used it
So fix ASAP. -
How do I download album art from Cd's I own not offered on Itunes?
I own some old cd's that I have imported into itunes, some from other countries. Some of these cd's are not offered on in itunes. Is there a way to download the art directly from the cd? Any ideas? I've already clicked "download album artwork" and it does not work.
There's no artwork on the CD. A tip for finding suitable artwork is to go to Amazon, locate the album, save the picture to your desktop and drag it to the iTunes artwork pane. Another way would be to locate artwork using Google image search and put the artist or album name and save the picture you find there in the same way. There are also some programs like this one: iTunes Art Importer or MP3 Tag
Here are a few more useful pages:
iPod & iTunes for Dummies - Adding Album Cover Art or Images in iTunes
Add Song Information, Lyrics, and Artwork to My Tunes
iTunes: How to Add Artwork to Songs -
Hi there.
I recieved the fifth generation iPod recently, and I freaking love it. Got one little... Well, big at the moment... quip, though. I got bored today, and decided to go and put album art on all of my assorted songs. All 1000+ of them. You can imagine that when 90+% of them refused to display on my iPod, I was quite tweaked. I had already noticed that some songs that had album art, but would not display anyways. Hoping it would make a difference, and because when (if) I got my DVD writer I would delete my library from my hard drive, I did not update the songs on the library, but the ones on my iPod. iTunes is set to update all songs MANUALLY.
It may be good to let you know that I have recieved a few errors in my iPod career, the one I most often get randomly being "An error occured while updating the default player for audio types. You do not have enough access privleges for this operation", and then one that worries me more: I searched google for a fix that involved turning album display on the iPod on and off, and I recieved "The iPod Hyperion EX (The name for my iPod, obviously) cannot be updated. An unknown error occured. (-50)"
I would really like to get this problem fixed. It worries me quite a bit, this thing cost 400 freakin' bucks. If you need any other info, do let me know.I had a problem where the incorrect album art was displaying once in a while. I used the same 'fix' of disabling the art and then re-enabling it. I got the same (-50) error, and ended up with most of the art disappearing (I guess because it bombed out of the process).
I ended up using the iPod updater to do a restore which blew away everything and set it back to a clean unit. I then re-synced everything from iTunes and all was sweet - haven't noticed another problem with the album art since doing this. Hopefully it will stay that way.
Oh, I also get the same message about 'access privleges' but just ignore it - haven't noticed any detrimental side-effects with doing that yet.
Cheers. -
..... is that a software problem due to ios 5? What can I do to fix that?
Thanks
WaymoreI am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al
Maybe you are looking for
-
Idoc Scenario from SAP to SAP via PI 7.1o
Q: Two idocs will process from SAP to SAP via SAP-PI 7.1o and generated together. Requirement : Sync 2 IDOCs – as we explained our design will require two IDOCs. The first IDOC will be developed by a Z code and the second IDOC is generated by 100% St
-
How do I stop auto launch of apps at start
Even when unchecking the box at shutdonw to not repoen apps at start up, the system continues to reopen apps at the next start up.
-
HT4108 iOS 6.1.3 and av adapter issue
A few weeks ago bought the Apple Digital AV Adapter, Model # A1422, for use with an iPad 2 (wi-fi only). It worked without issue for about two weeks until I updated the iPad to iOS 6.1.3 in connection with my purchase of a new MacBook Air. Now I ha
-
Powershell Get-Eventlog to export logs based on target machine
Is there a way to export windows event logs based on target machine with powershell? I want to use this code to filter or classify System Center related logs according a specific agent on a hostname.
-
Customer Master - Debit Notification Preferences
In the Customer master, on the Payment Details tab, there is a section at the bottom called "Debit Notification Preferences", under which I can choose a delivery method (email, fax, printed) and then enter the corresponding information (email address