Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Similar Messages

Officejet 6500A Plus Suddenly only prints red for most but not all occasions.

In the middle of printing a report it switched to RED ink. I bought and replaced black cartridge... though it still had ink. (NO SUCCESS) It prints BLACK for copies, for documents on Pages (I Mac) and from wife's laptop that is connected. SOMETIMES IT PRINTS BLACK when I click on PDF and Print.... but not all the time. It ALWAYS PRINTS RED when I print an e mail. No TROUBLESHOOTING suggestions seem to fit this irregular problem

PDF's are typically send to the printer as graphics, which may cause them to be printed with the color cartridge rather than black. If your cyan cartridge is low (or not working) the print will appear red. To address cyan not printing properly the document here may help.
Depending on your OS you may be able to set the printer to print in Grayscale and Black ink only.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

LDAP works for some but not all

I have CPS set up, and it's been working for years, all of a
sudden all of my users at one location cannot authenticate. The CSI
file is fine, but it's had to be replaced a few times. The users
LDAP settings haven't changed.
The server is at siteA and all siteA users are fine. SiteB
users cannot authenticate to contribute, but they can log into VPN
and choose a VPN connection at siteA and they work just fine.
The Access Denied message is coming from CPS, and is not NTFS
or other security.
We've deleted an affected user and recreated the account in
CPS and still no luck.
Anyone Seen this issue before?

Problem resolved. After a few conversations with different
teams, we found a change that went in at the time this started and
investigated what that change was.
There is a new Wan optimization appliance that started being
used between site A and site B which apparently caused my problem.
Once my connections where excluded from this appliance, everything
started working again as normal.
Just in time, I was planning to tear down and completely
rebuild my server today.

Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

How do I disable copy/paste for most (but not all) of a .pdf?

Hello, I'm trying to create a .pdf document that is a "how-to" guide. I'd like to disable copy/pasting from 95% of this document, with the exception of a few sections that i'd like my users to be able to copy and paste and use as email templates. I've gone ahead and set pasword security settings and un-checked the box for "enable copying of text, images, and other content". Is there any way that I can enable copy/paste for just a few small sections of my document? or is it an "all or none" function?
Thanks in advance for your help. -Geoff

Graffiti, Can you please expand on that? I'm using Microsoft Word as my original document. I'll have mostly paragraphs of non-copyable text, with a few sections that contain sample email templates that will be copyable. Example below. Thanks, Geoff
Here is my description of an amazing new process written in Word. To use this process, copy the email template below and customize with your own name.
Email Template
Dear John,
Copy this email and send it with your own name.
Thanks,
Geoff
More non-copyable text.

Fix *most but not all* issues with Time Capsule, Time Machine and 10.5.3

There are so many posts related to this issue, that I just wanted to create one short post with a how to fix / quick tips that seems to work for most but granted not all
Issues: Cannot backup, gets stuck into preparing phase or backup volume seems to be corrupted or not working. User was able to use TM with TC w/o problems before update to 10.5.3
1) Turn off TM
2) reboot TC (unplug and plug back in or do it via Airport Utility)
3) Disable energy saving and screen saving features (* see remark at the end)
4) reboot iMac, Macbook or whatever you are using
5) go to finder, unmount the backup volume
6) force a manual backup in TM
7) it will take up to 30 minutes preparing backup and then it should work
(*) I found that if the Mac enters into sleep mode or a password protected screensaver sometimes the backup gets interrupted and one get an error message. This seems like a bug and I reported it to Apple.

Hi! I've had the same problem and in my case I even couldn't access the Time Machine with the Airport Utility though I was properly connected with the network. Now it seems to work, and here's what I did:
- I did a hard reset of TC by pressing the reset button for 5 sec. until the light starts flashing
- I set up the whole network/airport/tc preferences again (what you always have to do after hard reset)
- I manually startet a backup.
When I manually started the back up for the first time, the TM preferences said "Preparing" and then stopped without backing up anything.
I restarted the backup again (manually) and finally it worked like described in this post: "Preparing" for roughly half an hour.
In this time, Time Capsule/Machine finds out, what files needed to be backed up. After that Preparation period, time machine started backing up as usual.
All you have to do is hard resetting and setting up the Time Capsule from new. You DO NOT have to delete the hard drive!!!
Message was edited by: DoubleMumboJumbo
Message was edited by: DoubleMumboJumbo

Ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?

ever since I turned on ITunes match, album art shows in coverview but not in other views on my iphone. Anyone else having this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Outlook and Treo 700 wx are missing most, but not all, of my calendar entries

I am running Windows XP and Outlook 2003 (SP3). I have a Treo 700 wx with service from Verizon. I normally sync via USB using ActiveSync. A few days ago I noticed that most, but not all of my calendar entries were missing. I am missing 99% of my future appointments, which of course is my big concern. I am not missing too many historical appointments (at least starting 1 month ago). I have synced the same way for years without a problem. I did try to set up Wireless Sync via Verison about a week ago. I called Verizon support to see if I somehow screwed up my calendar in the process of trying to set up Wireless Sync, and they said I never succeeded in setting it up (which I suspected), so they don't think that was the problem. Do you have any idea what I could have done wrong and how I get my future appointments back?
Post relates to: Treo 700wx (Verizon)

I am running Windows XP and Outlook 2003 (SP3). I have a Treo 700 wx with service from Verizon. I normally sync via USB using ActiveSync. A few days ago I noticed that most, but not all of my calendar entries were missing. I am missing 99% of my future appointments, which of course is my big concern. I am not missing too many historical appointments (at least starting 1 month ago). I have synced the same way for years without a problem. I did try to set up Wireless Sync via Verison about a week ago. I called Verizon support to see if I somehow screwed up my calendar in the process of trying to set up Wireless Sync, and they said I never succeeded in setting it up (which I suspected), so they don't think that was the problem. Do you have any idea what I could have done wrong and how I get my future appointments back?
Post relates to: Treo 700wx (Verizon)

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Flash shockwave 11.5 works for youtube but not amazon instant video

Shockwave 11.5 r502 works for Youtube but not for Amazon Instant Video.

Hi,
It asked me if I wanted to install something to make the videos load faster -
Check Safari / Preferences - Extensions. Might be lurking there. If so, select the plugin then click Uninstall.
Check:
~/Library/Internet Plug-Ins (~) Tilde character represents your Home folder
Check:
/Library/Internet Plug-Ins
/Library/Application Support
/Library/Input Managers
And check your Safari downloads folder. If the file is still there, double click to open. Might be an uninstaller you can use.
Help here for troubleshooting Flash
Carolyn
Message was edited by: Carolyn

My iPhone 4s lost most (but not all) of my iCal entries. Where did they go? How do I get them back?

My iPhone 4s lost most (but not all) of my iCal entries. Where did they go? How do I get them back?

Jhelin wrote:
My iPhone 4s lost most (but not all) of my iCal entries. Where did they go? How do I get them back?
The person that found them has deleted them on the phone so you iCal is gone is what I can figure.

Album Art works for most, but not all

Similar Messages

Maybe you are looking for