Album artwork either all mixed up or not showing up at all

All of my albums have the correct artwork in itunes but after i sync it to my ipod touch, most of the albums dont have the covers and some of them have the wrong cover. how can i fix this? I dont remember any of this being a problem until i upgraded to software version 2.2 for my ipod touch and the newest itunes.

I have the same problem with the artwork for just one album on the IPOD touch. It shows the cover from another album. However, the album names are not the same and the artist is not the same. All is correct in iTunes. I have not yet figured out how to force a refresh of the artwork on a sync, but perhaps there is a way.
Either the correct artwork got over written at some point, or as you guessed, the hashing scheme for linking the artwork to the album is flawed with more than one album cover resolving to the same key.

Similar Messages

  • Why won't Itunes get my album artwork? It just says could not be found when all the info is the same as Itunes.

    Out of no where suddenly Itunes refuses to get my album artwork. The info is exactly the same as Itunes but it refuses to get any artwork. I tried signing in and out, then back in. Nothing seems to work! Why won't it get my album artwork?

    .wav tracks don't have a tag, so you can't save artwork, or indeed other metadata to them. Use AIFF or Apple Lossless if you want the highest quality, but 256k or 320k mp3 may be just as good depending on the equipment you have and your own hearing.
    tt2

  • All profit centers are not showing up in KCH6N

    Hi All,
       We have loaded a list of profit centers to a new box and all of them are not showing up in KCH6N. CEPC table has all the loaded PC's.
      Thank you in advance,

    Hi,
    How did you load these profit centers - LSMW, ALE or manual? 
    If it is anything other than ALE, it will be available under the corresponding nodes when your do a expand all nodes.
    If you have uploaded the profit centers in the new system through an ALE, the problem is that it updates the table CEPC directly without using the t-codes and therefore the standard hierarchy doesn't get updated.  Even SAP recommends not to update the standard master data tables directly and it should be done by using the relevant t-codes either manully or through LSMW
    We had such an experience and we had to reload all the profit centers through LSMW again.
    Thanks and Regards,
    Bhuvaneswari.S

  • HT4759 change do not show up on all my divices like contacts

    change do not show up on all my divices like contacts

    Are you saying that changes to your contacts are not syncing to your other devices?  If so, you need to make sure that the contacts you are changing belong to the iCloud account.  To do this, open the contacts app on your device and tap Groups.  Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
    Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section).  Do you have the Default Account setting there, and if so, what is selected as your default account.

  • Why is my website not showing up AT ALL in Google?

    I uploaded my website at the beginning of this week and it's working OK, but not showing up at all in Google.  It is not so much an SEO question, because even if I google the exact website, it still doesn't show.
    I have no idea what I did wrong, but I assume it's a meta data issue.  What should I have filled out in the HTML for <head> box?  It's blank now.
    Thanks!!!

    You didn't do anything wrong most likely. It takes time to get indexed. Could be months depending on how your site is optimized, your content and traffic you generate to it.

  • Accordion not showing up at all in IE6

    I have a standard accordion set up at
    www.taradeal.com/pow.html
    and it works fine in Safari and Firefox, but does not show up at
    all in IE6 (the initial load of the text bits flashes up, but the
    Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
    freshly updated for DW CS3.
    The accordion display a standard RSS XML.
    Here's some code:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN">
    <html>
    <head>
    <meta content="text/html; charset=iso-8859-1"
    http-equiv="Content-Type">
    <link rel="alternate" type="application/rss+xml"
    title="RSS" href="pow-rss.xml">
    <script src="SpryAssets-xpath.js"
    type="text/javascript"></script>
    <script src="SpryAssets-SpryData.js"
    type="text/javascript"></script>
    <script src="SpryAssets-SpryAccordion.js"
    type="text/javascript"></script>
    <script type="text/javascript">
    <!--
    var powrss = new Spry.Data.XMLDataSet("pow-rss.xml",
    "rss/channel/item",{sortOnLoad:"pubDate",sortOrderOnLoad:"descending"});
    powrss.setColumnType("pubDate", "date");
    powrss.setColumnType("description", "html");
    //-->
    </script>
    <link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
    type="text/css">
    </head>
    <body>
    ... some table code
    <div id="poems" spry:region="powrss" align="left">
    <div id="Accordion1" class="Accordion" tabindex="0" >
    <div class="AccordionPanel" spry:repeat="powrss">
    <div class="AccordionPanelTab">{title}</div>
    <div
    class="AccordionPanelContent">{description}</div>
    </div>
    </div>
    <script type="text/javascript">
    <!--
    var Accordion1 = new Spry.Widget.Accordion("Accordion1", {
    useFixedPanelHeights: false });
    //-->
    </script>
    </div>
    ...some more simple display, and a Google tracker
    </body>
    </html>
    Thanks for any pointers on what's wrong.
    -dan

    Well, it seems to be a bug in the handling of the XML file
    contents. I fixed it by changing the code in SpryData.js to force a
    "manual" parse of the XML code. Not a good solution, but I don't
    know the codebase well enough to find the root of the problem. I
    know that the firstChild.nodeValue is "Object required" but I can't
    figure out who sets that and why. Maybe no ActiveX object?
    http://www.taradeal.com/pow2.html
    still broken in IE6 if you want to check it
    http://www.taradeal.com/pow.html
    uses changed code and dynamic-data accordion works
    Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
    function(xhRequest)
    // XMLDataSet uses the responseXML from the xhRequest
    var resp = xhRequest.responseXML;
    var manualParseRequired = true; /*** DC for IE6 **/

  • Some Devices are not showing up at all in the Discovery reports

    Hi all,
    The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
    My question is:
    Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
    Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
    Your kindly respond is highly appreciated.
    Thanks in advance.

    I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
    1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice]  : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice]  : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice]  : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
    2. in the CSDiscovery.log:
    Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
    I checked the file and the casusers has a Modify permission
    My Question is:
    1. what is the meaning of those output exactly?
    2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
    Many thanks for your help.

  • Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Have 2 airport extreme base stations connected in chain.  Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink.  Anyone have any ideas?

    Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
    As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
    Power off the AirPort by pulling the power cord
    Wait a minute or two
    Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
    Release the reset button and allow a full minute for the AirPort to restart
    Now try to configure the AirPort again.  If you continue to see the same symptoms as before, the AirPort will need to be replaced.

  • Calculate result as average in the report not showing average for all

    Hello,
    I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
    1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
    2. Aggreagation tab: exception aggregation: Total and reference char: []
    Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
    Please help me in resolving the issue- why portal not showing value for all.
    Thanks,
    Vijaya

    SAP note solved the purpose.
    Thanks & Regards,
    Vijaya

  • The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

    Hello,
    I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

    Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

  • Yosemite Calendar - All day events are not showing

    I have been using  Apple Calendar for quite some time but after I upgraded to Yosemite All day events does not show in the calendar any more. Other events in my calendar is showing.
    Environment:
    1: I'm on Macbook Pro Retina, running Yosemite 10.10.1
    2: Calendar is version 8.0 (2026)
    3: I am using Google Calendar, added as account to Calendar
    Problem/Bug:
    This has been working fine on Maverick until this upgrade and I think it is a bug in Calendar.
    1. I tried to add an all day event from Calendar, using my Google account calendar
    2. Event is saved, but once saved it isn't shown in Calendar.
    3. When I login to my Google account calendar, the event I created just created is shown nicely there!
    I then tried adding a new calendar using my iCloud account, but same thing happened:
    1. I tried to add an all day event from Calendar, using my iCloud account calendar
    2. Event is saved, but once saved it isn't shown in Calendar
    3. I once again try, this time by logging into my iCloud account, the event I created just created is shown!
    This is really weird and a major issue as all-day events are kind of important to see when you are planning and scheduling meetings.
    One additional thing, I'm not sure if it is related, I have Time zone support turned on as I am working across multiple time zones.
    Anyone else that have encountered this?
    Thanks in advance.
    // Per

    I  have the same proble. In all views all day events don't show up. If I search for the event, there is a result but it does not appear in the calendar.

  • I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
    Mylenium

  • When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

    When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

    It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
    I'm not sure if anyone else has this trouble, but it is a bit of a pain!

  • HT1386 My ipod touch is all of a sudden not showing in the left hand tool bar, I checked my cable it is fine.. help can't Sync

    My ipod touch is all of a sudden not showing in the left hand tool bar, I checked my cable it is fine.. help can't Sync

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I have several albums in my library that do not show the album artwork.  It states it is not available in the iTunes store.  In the past I could copy and past album artwork.

    I have Windows 7 on my laptop and the latest version of iTunes.  I have several albums in my library that do not show the album artwork.  iTunes states that it is not available, even though the album is available on iTunes.  In the past, I could copy album artwork and then paste it on my albums in iTunes.  In the lates version of iTunes, a past option does not seem to be available.

    JPGronek,
    There are 3 ways to get custom art into the Artwork box:
    copy/paste
    drag-n-drop
    Add from a file location.
    In various iTunes releases, it is common that one of the the three is broken.  Try one of the others.

Maybe you are looking for