Album Cover won't display properly

I just purchased a TV Season of a show, and every episode downloaded properly, but the Album Art cover does not display correctly. I really hope I don't have to delete, and purchase this season again. Has this happened to anyone else? How is there a way to fix it?

I have a 9 GB iPOD touch and this very thing happen to me. I can see the artwork via iTUNES but some of the artwork would not transfer to the iPOD. When looking at the album covers on the iPOD you'd just get a blank area where the album artwork would be.
I was unable to find any place inside of iTUNES or on my iPOD that would allow me to select or deselect artwork artwork as has been stated above.
My solution was to do a restore to factory settings. After I did this and did not use the back up... that may have been messed up too... All my artwork was there and the iPOD seems to be acting much better... it was sluggish after I updated to 2.x
Anyway if anyone is having issues and you have not resolved it try doing the restore as if it was a new iPOD.

Similar Messages

Photo page won't display properly in safari

Hi everyone!
I'm completely new to building websites and need some of your expert advice?
For some reason my photo pages won't display properly in Safari but ok in Firefox?
It worked fine a week ago and I can't think what I've done wrong since I republished last night?
http://www.abeledo.talktalk.net/losavellanos/House.html
Can anyone help?
I'll buy you a pint!
Cheers

No luck unfortunately.
I changed the background to a solid and made the changes that you suggested roddy, but neither seemed to work. I know I must be doing something wrong? Do the photos appear ok with you roddy? All I see, is half the page i.e nav bar, top image, 'the house & garden etc text and top half of the darker box where the thumbnails should appear. And this happens with all 3 photo pages currently on the site.
http://www.abeledo.talktalk.net/losavellanos/House.html
http://www.abeledo.talktalk.net/losavellanos/Teror.html
http://www.abeledo.talktalk.net/losavellanos/The_Island.html
I've been clearing my cache in both browsers every time I republish.
I've also tried upgrading to the new 3.0.3 beta Safari? You'd think - out of all the browsers- iWeb would work seamlessly with Safari wouldn't you? - Firefox is fine.
Do you think I should start from scratch?

Some album artwork won't display on iPad

Hi guys,
Some of the song's album artwork won't display on my iPad or iPhone but shows up against each song in the album on iTunes on my Mac. There are entire albums' artwork not showing, yet when I open and play the same song in iTunes on my mac, it's there.
Any ideas?

in iTunes, choose to not *display Album Artwork on your iPod*, then sync your iPod, then change it back to display album artwork and sync again. I believe that will fix it.
Message was edited by: TronDon

Why won't my album cover won't show on my iPod touch 4g or my computer?

Why won't my album cover won't show on my iPod touch 4g or my computer?

Delete the songs with no artwork on your iPad and resync your music from iTunes on your computer.

Some album artwork won't display on iPod Classic

I've had a strange problem recently with my new iPod Classic(and, come to think of it, my 2nd gen. iPod Nano): certain album artwork won't properly display, but will instead show up as a black square(like the 5th Metallica album, or the Spinal Tap album...). Sometimes, this happens only with certain songs on an album. For instance, I purchased 2 songs from the album "Employment" by Kaiser Chiefs last year. Recently, I purchased the CD, and I imported it to my computer. I chose "get album artwork" so the album cover would display for the newly imported songs, as well as the 2 I already bought. Now, the 2 songs I bought last year display their artwork normally, but the newly imported tracks just display the black square.
What's going on, and how can I fix it?
Thanks in advance..

in iTunes, choose to not *display Album Artwork on your iPod*, then sync your iPod, then change it back to display album artwork and sync again. I believe that will fix it.
Message was edited by: TronDon

Album frames don't display properly: Since .MAC converted to MobileME help?

ORIGINAL MESSAGE POSTED TO APPLE SUPPORT
Ever since .MAC was recently down - and converted to Mobile Me - I have been having problems with my iWEB site:
1. Frames around Photo Albums no longer display (on mac or win web browsers)
- On Windows Computers - The Frames do not Display at all
- On Mac (Safari or Firefox) they all look like see thru WIRE frames
2. iWEB text box frames (that were once hidden) now seem to Display and
they display in weir positions over and under other boxes.
3. Safari Web Browser now ask to load certain fonts!
4. Browsing my iWEB site is VERY VERY VERY SLOW!
- From home
- From work
- over at friends
In other words the speed of a persons internet connection does not seem to
make any difference. It was all beautiful and fine before the transition, and now
its slow.
I have not done an upload to .MAC from iWEB for several months - so I don't believe it is anything I have done.
My iWEB site is our FAMILY TREE site - so family members have been calling and telling me of the problems and the slowness over the past week.
PS: I like the extra 10GB of storage, and the new Mobile ME features seem cool --BUT I MUST GET our family iWEB site running smooth once again.
I have just recently upgraded to Leopard and for the most part everything is running fine - but as stated - I have NOT performed an iWEB upload using Leopard - the last was two months ago under Tiger.
MacBookPro Intel Core Duo
2.16GHz processor
2GB RAM
120GB Harddisk
Mac OS X 10.5.4 (Jaguar - just installed July 7)
Second posting to Support
Hello,
Ever since the transition - I'm still having the following problems with anyone trying to view my iWEB site (uploaded over 2 months ago before the Mobile ME transition).
(of note: I performed the MobileME system update yesterday and that did nothing)
1. Website redraw is VERY SLOW
2. Text Box FRAMES are now Visible - when they were not before!
3. Viewing my WEBSITE that I built using iWEB - the FRAMES applied to Photo and Movie Albums do not display properly as they did prior to the Apple mobile Me conversion. (see attached screenshot).
As stated I have not done an iWEB upload for over two months - and everything was working fine until this Mobile me conversion. Now when viewing on Mac or Windows all of my Photo Album frames display improperly (they look like see through wireframes) when viewing in Safari or MS Explorer. NOTE: The albums will NOT display at all using FIREFOX.

Since I recieved no responses I assume no one knows. Thanks anyway.

The album artowrk won't display on my iPod.

To put it basically, the album artwork does not display on my iPod any more. It is shown in iTunes, and when I right-click on a song and look at its "info" It shows the artwork.
I have tried deleting all of the songs and re-adding them from their original files, but nothing happens. What can I do?
All songs have been purchased from iTunes.

Well you should be able to do this with the newest iTunes, I have no trouble doing this.
I just copy/paste an image into the artwork box. This doesn't work for you?
Doing this didn't didn't work in iTunes 7, but does in iTunes 7.0.1.

GoDaddy site won't display properly

I have been working with a client's Dreamweaver site; however, when I went to upload it to GoDaddy, the pages and images don't display properly. How can I fix this?
Will I need to change the links for every missing graphic, so that they come directly from the root? Is there an easier way?
This particular site has multiple level and sub-folders, etc.
Please HELP!!!!

Thank you so much! I hadn't thought about that. Since it's a one-time fix, I'll go through and change any absolutes to relative.
Thanks again.
Sincerely,
Lynn

Noise reduction won't display properly in LR 3.4.1 Develop Module

I encountered this issue first time last night - noise reduction will not show in "Fit" view of the Develop module for pictures that have a graduated filter applied as well. Having said this,
- The pictures display correctly in Library Loupe view (Fit and 100%)
- The pictures display correctly in Develop module when zooming in to 100%
- The pictures display correctly in Develop module when clicking in history on Luminance smoothing (first picture). Selecting the next step in the history, Add Graduated Filter, displays the picture without noise reduction (second picture - I tried on a virtual copy the other way round - first have a graduated filter and then apply noise reduction, but doesn't work either. Noise reduction just won't display in Develop module / Fit View once a graduated filter is applied as well.
Has anyone else seen this behaviour or, even better, found a solution? I already tried purging the raw cache, no success. Working on Windows 7 / 64bit.
Thanks,
Andreas

Jeff, I had difficulty understanding this same issue as presented at the link I posted above. With my low-noise Canon DSLR RAW images I simply couldn't see the onscreen rendering issues they were talking about. It even appeared this might be unique to Mac platforms and Windows 32 bit OS, since my Windows 7 64bit system didn't appear to have this issue.
Following suggestions to shoot a picture at -4 F stops and then increase exposure by +4 F stops in LR helped me get a better understanding:
http://forums.adobe.com/message/3857767#3857767
Granted this is an extreme shooting situation, but it helps demonstrate what happens when using exposure, fill and HSL sliders to increase exposure significantly (+2 to +4 EV) in specific areas of the image. Now you have noise that will be visible in smaller exported scaled images, perhaps even those sized for posting to the web.
The issue is at lower ISO settings (camera specific), view sizes less than 1:1 have no noise reduction applied (Mac & Windows) or sharpening applied (Mac & Windows 32). There appear to be platform differences in the way sharpening is applied, because on my Windows 7 64bit system sharpening is applied at all ISO and all view sizes including "fit" view, but noise reduction is only applied at higher ISO settings – the same as all others have described. I wanted to point this out since it is one of the reason I had difficulty duplicating what the OP was seeing.
We know sharpness and noise reduction settings interact with each other, so it is important to have both applied in the onscreen image to determine their affect. Using images with additive Exposure, Fill and HSL slider settings approaching +2 to +4 EV, there is simply no way to see accurate rendering without both noise reduction and sharpness applied at all view sizes, including “fit” view. This can occur with low ISO images, not just at some predetermined camera specific high ISO where noise becomes predominant.

When I try to add motion to a photo, the image just becomes white and won't display properly--what am I doing wrong?

Although the photo settings display properly and seem to indicate what I want will happen (the sliders work and I can set start and end times, etc.) as soon as I click the check box for "ken burns effect" the image becomes white and stays that way unless I undo my actions. Very frustrating. If accepted, it stays white and does not show the original image when the movie is played. What is going on here?

On the right hand side of the Photoshop window I used the Levels under "Add and adjustment". The tag for the photo in the upper left corner says IMG_3639 copy.psd@25% (Levels 1, Layer Mask/8)

Album covers won't display in Cover Flow mode.

I've just recently re-installed my Windows XP, re-installed iTunes, and re-installed all my music again from my back-up discs. My iTunes is working fine ie plays the music, searches, displays iTunes store etc. However, when I click on the Cover View icon when playing an album it states, 'iTunes unable to browse album covers on this computer'. The album covers show up in the list/album view but not in cover view. It didn't do this before. Maybe it's something simple I've missed - any ideas?

Does this article help?
http://docs.info.apple.com/article.html?artnum=304402

Album Artwork won't display correctly.

I've been having this issue for a few months now. My music doesn't have the right cover art on my Ipod touch 4 (running 6.1.6) but it displays correctly on iTunes 11.1.4 for PC. What happens is cover art for other music that i own will be on albums that don't match the artwork. I've tried clearing and redownloading the artwork, reinstalling (the same version) iTunes, deleting my entire library and starting from scratch, and restoring backups of my ipod but to no avail. Is this fixed with iTunes 11.1.5 or am i stuck like this?

i am having the exact same issue right now
on the music list (also in itunes) it'll display the correct album artwork but when i play the song it'll display a different artwork rather than the original :/
i want to find a way to fix it since it's bothering me a bit

Animated GIFs won't display properly in Mail.app

I have a weird problem with animated GIFs received as attachments in Mail.app. On my Mac mini, they're only displayed as the first frame within the Mail message window and the animations don't play. But on my iMac G4, the same messages display the animations properly within Mail.app. Both Macs are currently running Mac OS X 10.4.4, but I've observed this problem since 10.4.3. I have the same software installed on both machines. Does anyone have any ideas why this is happening?

* Test.java
* Created on January 13, 2007, 6:52 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package Test;
import javax.swing.*;
import java.awt.*;
import java.util.*;
* @author Calbrenar
public class Test extends JFrame
    private JList testList;
    private DefaultListModel listModel;
    private JScrollPane serverLogScroller;
    private Container container;
    /** Set up GUI */
    public Test()
       super ("List Test");
       //Get content pane
       container = getContentPane();
       container.setLayout(new FlowLayout());
       listModel = new DefaultListModel();
       listModel.addElement("");
       testList = new JList(listModel);
       testList.setVisibleRowCount(1);
       //testList.setFixedCellHeight(35);
       //testList.setFixedCellWidth(400);
       serverLogScroller = new JScrollPane(testList);
       serverLogScroller.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
       serverLogScroller.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
       container.add( new JScrollPane( testList));
       setSize(700, 75);
       setVisible(true);
    public void addStatus(String str)
       listModel.add(0, str);
       //testList.setPreferredSize(new Dimension(400, 15));
       //serverLogScroller.revalidate();
       container.validate();
    public static void main ( String args[])
       Test application = new Test();
       application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
       application.addStatus("-ERR");
       application.addStatus("+OK Enter Password");
       application.addStatus("-ERR Bad Pass");
} // end class Test

Imac 2006 monitor won't display properly

The left half of my monitor is fuzzy and black on my 2006 imac. I have a cable to connect an external monitor. How do I get the external monitor to work properly. Right now when I plug in the external monitor, all I can see is when I move the mouse left to right (and off the imac monitor, it continues onto the external monitor. I am a beginner with all this.

Open System Preferences, click on Display, click Detect Displays, select your external display, and check the box for Mirror the Internal Display. That should make the external display what the internal display is supposed to show.
You might have to fiddle with Resolutions to get the external display to appear properly (if at all, because it is probably a bad logic board or graphic processor, which will make external display not work properly, and is a very expensive repair).
Good luck.

Album art won't display on ipod screen

i just rec'd the new 60gb ipod for xmas and i can't figure out how to make the album art display on the screen. can anyone help me?

the album art has to first be imported into iTunes for it to show up on iPod. To do this, open a site like google and do image searches on the albums (don't go above 300x300 pixels or it'll take up too much space). Then, open the song edit and drag the album art into the space for it. repeat for all discs and then update iPod, should work fine.

Album Cover won't display properly

Similar Messages

Maybe you are looking for