Album pictures gone on my ipod after update

my albums pictures are gone after I updated to the newer software for my ipod. I used to see a picture of an album when I listened to a song. does anybody know how to fix this problem?

This is still lady of the woods.
I finally uninstalled iTunes 7 & then installed iTunes 6 again. Now I can transfer music, but I get no Video.
Any suggestions?

Similar Messages

  • Frozen 5G iPod after updating

    After purchasing an album from iTunes, I was advised to update to iTunes 7.0, and subsequently to a newer iPod software. On completion, my iPod 'froze'. Every time I reset it, it behaves normally for approximately 20 seconds then freezes again. I've restored the original settings, have drained the battery and completely recharged, but nothing else seems to work. Appreciate any advice!!!

    Sure -- here you go:
    iTunes 6: http://www.filehippo.com/download_itunes/?1249
    Firmware 1.1.2: http://www.apple.com/support/downloads/ipodupdater20060628forwindows.html
    The only way to get back to the old firmware is by first downgrading to iTunes 6.

  • Itunes not recognizing 7th gen iPod after updating to windows 8.1 and latest itunes, works on other computers

    So I updated my computer to 8.1 I don't know if I synced my ipod after that, but I know immediately after updating iTunes, I began to receive an error message saying iTunes recognizes that I connected an iPod, but can't identify properly.
    I've tried uninstalling and reinstalling as well as restarting the computer, trying different USB ports. it works when I connect it to other computers.

    Hi HIJKay,
    Thanks for using Apple Support Communities.  This article has some steps you can take if iTunes isn't correctly recognizing your iPod:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    Cheers,
    - Ari

  • Podcasts fail to show on iPod after updating to iTunes 10.1.0.56

    Hi,
    I'm using a 5th gen iPod classic. When I updated iTunes to version 10.1.0.56, all the podcasts I downloaded from iTunes after the update failed to show up on my iPod after synching. I've downloaded podcasts before and had them show up on my iPod. Is there a different procedure I don't know about?
    Thanks for any help.

    Hello msapostol,
    And welcome to Apple Discussions!
    You may want to double check your iPod's Sync settings for podcasts from under your iPod's Podcasts tab in iTunes while it is connected.
    Updates to iTunes or your iPod has known to reconfigure certain settings.
    B-rock

  • Itunes does not recognise the ipod after update to itunes 8.2.0.23

    Hi, Now find, after putting new songs in my play list, that when I plug in ipod to update songs on ipod itunes does not recognise the ipod.
    The version of iTunes I updated to was 8.2.0.23 - everything worked fine until then. I see there is a newer version 8.2.1 now available - do you think by installing this the "unable to recognise" problem would be fixed???
    Thanks for your thoughts!

    I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

  • PC won't recognise ipod after updating iTunes

    I have just updated iTunes to the latest version for Windows, and spent some time getting it to work again - I had to reinstall Quicktime (version 7) before iTunes would open. The new version would not recognise my iPod, so I downloaded the latest iPod updater 2005 11 17 and ran that.
    The dialogue box asks me to "plug in the iPod to update it", but when I do it just sits there. The iPod remains in "do not disconnect" mode, nothing happens for a while and then the entire system crashes to a blue screen that explains that Windows has shut down...
    The iPod is about 2 years old and one of the 40GB models with a plain wheel and the four buttons across the top.
    Can any kind person give me a pointer what to do next?
    Thanks
    Nick
    Evesham Laptop   Windows XP  

    Could it be due to the recent iTunes update as I've just updated it and since then my iPod hasn't been working? :S

  • ITunes won't recognize iPod after update

    I got a 40G color photo ipod froma friend and had it restored, plugged it in, added my music, unplugged it, and used it just fine. I went to plug it back in to add a few more things and it was not recognized by iTunes. The autoplay window came up and then the iPod installer said I had to restore the iPod- which I did. Then I reinstalled my music, unplugged it, and it worked fine. Then I plugged it back in and the same thing happened. I went to the apple store and they restored it again and ran diagnostics on it. It seems to be just fine. I got it home. plugged it back in to my laptop, added my music, and it worked fine. Then I unplugged it and it messed up again.
    You can see the frustrating cycle that I find myself in. Here are the things that I have noticed:
    When I stop the update partway through, disconnect and then reconnect, it seems to be fine. Once the update is finished and the iPod is disconnected and reconnected, it seems to never work properly.
    Also, it seems that when it is working properly, when I open the safely remove hardware window, the iPod is recognized as an iPod. It reads:
    USB mass storage device
    Apple iPod USB device
    When it is not being recognized, I open the safely remove hardware window, and it says:
    USB mass storage device
    Generic volume - (E:)
    Apple iPod USB device
    Could this be the problem?
    iPod 40G color photo   Windows XP Pro  

    B- I plugged in my iPod again this morning and got the same autoplay window- and no recognition. I went in to change the drive letter of the iPod following the instructions on the link you gave me. When I pull up the disk management window, I see 2 disks listed: (C:) and (E:), but it does not say IPOD like the picture does on the help page. Should I change the drive letter anyway? Does this mean that it's not recognized as an iPod? Thanks for your help...
    Also, about 3-5 minutes after the autoplay window comes up, I get an "iPod not readable" message that instructs me to open the iPod updater to restore my iPod- which I've done 5 times already.

  • Oh no! Something has gone wrong... after update

    Hi all!
    Yesterday I updated my Arch with `pacman -Syu`. After reboot all gone fine until GDM load. From now on I get background briefly displayed and after 1 second or so I get a screen with:
    Oh no! Something has gone wrong.
    A problem has occured and the system can't recover. Please contact a system administrator.
    ...and a picture of a monitor with sad emotion
    Not too informative.
    I've looked syslog, messages, dmesg, gdm logs and found nothing special in them. Trying to `rc.d stop gdm` spawns it again with same symphtoms.
    I have ThinkPad E420 (Intel graphics) if it matters.
    Where should I look to narrow down the problem? Thanks in advance.

    Omg, got it!
    I've fount something like:
    JS ERROR: !!! Exception was: Error: Argument 'text' (type utf8) may not be null
    JS ERROR: !!! lineNumber = '0'
    JS ERROR: !!! fileName = '"gjs_throw"'
    JS ERROR: !!! stack = '"("Argument 'text' (type utf8) may not be null")@gjs_throw:0
    ()@/usr/share/gnome-shell/js/ui/dateMenu.js:212
    in /var/log/gdm/:0-greeter.log and after few tries and errors I deduced the problem to a line in /etc/locale.conf
    export LC_TIME="ru_RU.UTF-8"
    I commented it out and voi-la, gnome started as usual. Crazy, crazy day…
    Now the question is still open. Have anybody ideas how could ever such thing stop GDM and Gnome from starting?! How could I return back my local date/time format?

  • HELP!!! Pictures gone since iTunes / iPod ?!

    I did get an iPod from my boyfriend. My iPod works fine. So far so good.
    But now the problem. Since I 've installed Itunes I don't find my pictures back.
    Most of them are gone. Some of them have only left my an empty map. Some of them have changed from jpg into jpg.file but are also empty.
    Nothing to find in the trash.
    Who can help me to solve this problem?
    Thanks!

    I think your best bet is to create a new library and start over.
    First to recover the pics from your current (damaged) library:
    To create and populate a new library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Then add i any pics you recover in the normal way.
    Regards
    TD

  • No longer safe to remove iPod after updating (synching)

    I'm using iTunes 7 on XP Pro. AMD Athlon 64. 4G 60-gig iPod (color).
    "Enable Disk Use" is NOT checked, but my iPod now shows up as a Removable Disk in XP. And after synching, iTunes says "iPod update is complete" but no longer tells me it's safe to remove my iPod.
    Yes, I can manually eject the iPod, but that's a bit of a pain. I'd rather just grab it and go. Any ideas?
    (Please don't tell me, here in the WINDOWS forum, that buying a Mac will solve all my problems. Another answer like that will send me into the nearest clock tower.)

    Well, I believe you should keep it because you may need it later.
    Try to delete other files on your computer, or backup some of the data to CD-R, DVDR or external hard drive and then remove them.

  • Cannot sync iPod after updating to 10.4.1 for windows. Help?

    I recently updated to iTunes 10.4.1 for Windows 7 on my PC and now I can no longer sync my iPod. Once it starts syncing music, I get an error message that says "iTunes Has Stopped Working" and it does not give me any kind of resolution to the problem. I have uninstalled / reinstalled iTunes and all other Apple software from my computer but I'm still running into the same issues after I've reinstalled everything. Does anyone know why this might be happening and how I can resolve the issue? I've researched the issue and it seems like a lot of people are running into this and I haven't found any kind of universal fix yet.
    Thanks

    Upgraded to iTunes 10.5 and it syncs fine now so if anyone else is having the problem, that's the only solution I've found out there.
    PS - Posting on these forums appears to be pretty useless!

  • Why can't I sync my ipod after update

    After doing the latest update, my ipod, iPad and iPhone is no longer recognised in iTunes. None of the devices I have are connecting or showing in connected devices box, it is all greyed out. I have run the device test on iTunes but it says there is an error and it cannot find any connected devices. Please help, this update has driven me crazy as my iTunes and my devices always connected with no problems.

    What did the error message say?
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

  • Notes are gone on Macbook Pro after updating to OS X Mavericks

    Right after my mac restarted itself for the OS X Mavericks update, I looked in my notes and literally everything was gone. I unfortunately didn't have them backed up to anything, so they're most likely gone unless Apple can help me with that. But, nevertheless, why would this happen?

    Make sure Notes is selected using your correct Apple ID in System Preferences > iCloud.

  • My iphone 3Gs has gone into recovery mode after updating via itunes..help..

    I plugged my iphone 3gs into itunes yesterday and it started to update the software - presumabley to 10.5? - came back to it an hour later and it was displaying an image of a usb cable and itunes symbol which i now undertand means its gone into recovery mode.
    I tried to restore it to the factory settings as advised but it won't work. Its telling me "This device could not be restored, it is not eligible for the requested build"
    Please help - this phone is not jailbroken!

    Ok, after 2 nights searching forums and trying different things I have managed to find a solution. I had to add a '# ' at the begining of the host directory.  This means nothing to me and I had to follow the steps in the following link but it worked perfectly -
    https://discussions.apple.com/thread/3042366?start=0&tstart=0
    Hope this post helps someone else sometime.
    Matt

  • Cannot eject Ipod after updating to 5.0

    I've never had trouble with ejecting until just updating to 5.0. I get the message, "the Ipod 'ipod' cannot be ejected because it contains files that are in use by another application." Now the new music on my desktop won't go to the Ipod. Any suggestions would be greatly appreciated.

    My problems on an iMac G5 running Tiger started 9/21 when I upgraded to iTunes 5.0.1. (Prior to that there were problems mounting the iPod if I waited too long after turning on the computer, iTunes 5.0).
    On 9/21 iPod mounted but would not sync nor eject. Strangely, on 9/22 iPod synchronized and ejected; but on 9/26 it would not sync even though iTunes said it had. And then it would not eject, giving error messages to the effect that the iPod or its files were in use by antoher application.
    9/27 I plugged the iPod into a Powerbook running Panther... no mounting problems... no ejection problems.
    The iPod is third generation with version 2.3 software... connected by firewire.
    I need help also... I am concluding that the problem lies in either the computer, Tiger or iTunes. But how to fix?

Maybe you are looking for

  • ADF messages in locale Catalan

    Jdev. 11.1.1.4 Does anyone know if ADF messages are also in "Catalan" language. It is an european local language. Or anyway to look for it..... I'm translating an application to his language and have found that some System messages appear in English

  • Recipient Cannot Open Attachments

    I'm terribly sorry if this is a repeat but I could not find this question anywhere in Help area or in Discussions. It seems EVERY SINGLE TIME I send an e-mail with an attachment (click attach file button, choose file, click OK) the recipient calls me

  • EP6.0 Configuration in Solution Manager4.0

    Hi All, I have Solutionmanager4.0 with SPS12 and EP6.0. I would like to configure my EP6.0 system in Solution Manager for EWA. Could anyone help me for this Configuration? Thanks in advance Regards Pranav

  • My fans don't speed up until 95degrees celsius on MBP 15 2012 non-retina, why?

    I recently upgraded my laptop from a mbp 15 2.2ghz late 2011 to mbp 15 2.3ghz mid 2012. After I installed iStat menu I noticed that my fans speed increase only after the processor gets 95 degrees celsius (until 95 stays at 2000rpm); when it gets to 1

  • Steps to Get Microsoft.Workflow.TestServiceHost.exe to register my events

    Hi: I have created a Visual Studio 2013 Blank SharePoint project, entered in my url of choice and choose farm solution. Next, I added in a Workflow added a single sequence. In that sequence I then added a WriteToHistory and WriteLine. All is well. I