Album settings reverting during playback

i have imported music into itunes, and changed the album name and information for the file. however, when i listen to the track it reverts it back to what the album name and information was originally. because of this, i also can't change the album artwork.
what do i need to do to solve this problem?

Is there anything else that should fix this problem? I have converted my problem tracks' tags to 2.3, and also tried 2.2, and the information still reverts when they play or I Get Info on them. Fortunately it's only one one CD's tracks, but it's still maddening!
iTunes 8.0.2

Similar Messages

  • I purchased and successfully downloaded Caravan Palace - Caravan Palace and Panic. Both albums skip and cutout during playback. Q: what's happening and why?

    I purchased and successfully downloaded Caravan Palace - Caravan Palace and Panic. Both albums skip and cutout during playback. Q: what's happening and why?

    Sounds like a corrupt download.
    From iPad:
    Delete the albums: swipe you finger across and tap delete
    Make sure you have a good internet connection & re-download: Open iTunes app > More > Purchased
    From computer:
    Delete the albums: Select > right-click > delete
    Go to iTunes Store > Purchased (in Quick Links on the right)

  • Pan settings and sometimes volume levels change during playback

    pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

    pan settings and sometimes volume levels change during playback without my touching them in Logic X! I haven't set any automation and strangely a similar thing happened to some plug-ins i used in pro tools m-powered. Any ideas as to why this is happening would be greatly appreciated? Cheers

  • Audio dropping out during playback in timeline

    Hey everyone,
    I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
    27-inch, Mid 2011 iMac
    3.4 GHz Intel Core i7
    16GB 1333 MHz DDR3
    AMD Radeon HD 6970 1024MB
    Running Mac OS X Lion 10.7.5 (11G63)
    Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
    Working in Premiere Pro CS6 Version 6.0.2
    Editing in a sequence with settings:
    1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
    Working with footage that is 23.98fps
    Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
    The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
    I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
    Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

    Having this annoying problem also.  Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
    Really annoying.  Audio used to be so simple and untaxing to a sequence.
    Adobe Premiere Pro CC 2014.1 release
    8.1.0(81) Build
    OSX 10.8.4
    40 GB RAM
    G Raid G Speed Q w/ ESATA connection
    1920x1080 29.97 Progressive Scan Sequence
    48Khz
    Apple PRoRes 422
    12 channels of audio/ only 2 of 12 monitored.
    1/2 resolution on Program monitor
    ADOBE.....WISH THERE WAS A SOLUTION?

  • IPod Nano 4G Skips During Playback with Apple Lossless Songs

    My iPod Nano 4th Generation has been consistently skipping a brief portion of music about every 5th Apple Lossless song during playback. I've been working unsuccessfully to resolve this issue with tech support and fixed the problem when I disabled the energy level setting in the playback menu. While this is a hit to battery life, the skipping no longer occurs. Hoping that this issue is permanently resolved in an upcoming software update.

    Hi,
    I brought my ipod yesterday and had the exact same issue. it would skip certain songs frequently and was extremely frustrating. Im not sure if this is the case for all ipods (i have an ipod nano 16Gb 4th gen, with firmware 1.0.4), but i fixed my issue in a series of steps. Im not sure which exact part of my method did the job, but here it is:
    1. plugged it into iTunes and clicked "restore" under the tab "summary". WARNING: This will delete everything, and restore factory settings. im not sure if this is necessary, but youll need to delete the songs which skip anyway.
    2. pressed the eject button IN ITUNES (under "devices", and next to your ipod icon), ejecting the ipod. wait for the ipod to specify when it is ready for it to be unplugged. proceed to unplug said ipod.
    3. Choose the language of your ipod, and go into playback settings and (settings/playback or something) and turn OFF "shake" and "energy saver"
    4. Plug your ipod into your computer again and drag all the songs onto your ipod using itunes.
    5. after it has finished copying, WAIT until the ipod no longer says "synching", and until it says "connected"
    6. Press the eject button IN ITUNES (again, under devices, and next to your ipod icon)
    7. Eject when the ipod says it is ok to do so.
    As i said, im not sure which part of the method did it for me, but i think it might be the way in which i was ejecting it. Before i was ejecting the ipod on my desktop. I think it is important to eject it using itunes. Anyway this fixed my ipod. Im not sure if it will do the same to yours, but if its making you very angry (to say the least) like it made me, its worth a try i guess. I would appreciate it if people let me know if this works.

  • My apple tv stalls during playback. How can I fix this?

    My Apple TV stalls during playback. I am hooked up through ethernet so I'm certain that it is not a network issue. What happens is that after a few minutes of normal playback the movie that I'm watching simply stalls. It looks like AppleTV is trying to reboot it. if I rewind it briefly and restart the movie by pushing play it seems to be fine. But it it stalls again after a few minutes. I have to do this very often and it becomes quite distracting when you're trying to watch a show.
    One thing I have noticed is that if I pause the program before it stalls and leave it for about 15 minutes I can watch a large portion of the show uninterrupted.
    The files are in my iTunes library. I don't seem to have this issue if I'm playing the files from my iPad via AirPlay. I have restarted, reset, and rebooted AppleTV several times and it still keeps doing it. Any suggestions out there?

    640 x 480
    Widescreen 16:9
    These settings are contradictory. Please post a screen capture image of the QT "Inspector" window to confirm what encode matrix setting, PAR display setting, and Scale display settings are actually embedded in your file. Also please confirm whether or not the source material was widescreen and it is 4:3 aspect you wish to correct at this point. If not, then please state the height at which the transcoded file was encoded and the target aspect ratio at which you want files to play in all media players.
    Once compressed it plays back in Windows Media Player as 16:9 video.
    When played back with Quicktime it is squished into a 4:3 format.
    Different players dispay content aspect differently.
    Why is this happening and how can I fix it?
    QT 7, for instance, displays the file using specific Scale dimensions and if these dimensions are not equivalent to PAR/anamorphic playback settings, then the file can display differently in differently media players. As to fixing the problem, that depends on which setting you are trying to fix and what platform/software is available.

  • External monitor frozen during playback

    I am having trouble with my monitor not PLAYING during playback. I get an image when I scroll through the timeline but when I play - the image is frozen.. As soon as playback stops, the monitor refreshes to the correct frame - but it doesn't show during playback.
    We have tried all these steps already:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    7 ) If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
    What is really mindboggling is that the monitor is working in terms of giving us the correct image - just not during playback.
    PLease help - thanks.
    G4 Powerbook   Mac OS X (10.4.4)   Final Cut Pro 5

    I think you may be onto something with the graphics card concept. The problem I am having only exists when I am working on an HD project. When I switched back to DV-NTSC then the monitor is fine during playback.
    Yes, I am routing my external monitor through my DV deck, which is not an HD deck - so again, that could be another weak link in the chain.
    This is the first HD project that I am editing, so obviously a few kinks still need to be worked out. My internal hard drive has 1.5 gigs of ram but I am not sure what the specs are on the graphics card.

  • HD footage in 4:3 timeline project comes out stretched during playback!

    Hello Fellow Final Cutters,
    I am doing some projections for a theatre show, and need to project in 4:3 aspect to maximize screen area on an unusual shaped screen. I am using FCP6 and monitoring onto both my Apple 20" display and/or NEC (native 4:3) projector with display settings set to 1024x768. My sequence settings are Custom size 1024x768, square pixels or PAL ratio, field dominance none, compression Animation, Photo Jpeg, or ProRes422. I've tried all combinations of this but the problem is, I can monitor the correct aspect when the frame is STILL, but when PLAYING it squeezes into 16:9.
    This will be a problem when doing test projections in rehearsals, as it won't fit the custom 4:3 screen in the set. Exporting a QT displays fine in 4:3 on the external displays, it is just when playing from the FCP timeline, the image becomes squeezed.
    Does anyone have any suggestions on basically monitoring a custom 4:3 sequence during playback without 16:9 distortion?
    Cheers, hope you're all well
    Sam

    Oh, when I'm working in rehearsals its good to be able to update as fast as possible... watch a section of performance, project the images simultaneously, stop say after 30 secs, adjust image, re-render, playback from timeline, stop, adjust image, re-render, etc. Similar to editing with a client in studio, I need the display to show what the final outcome actually is on the fly.
    Usually I am working in HD, projecting 16:9 or previously in SD projecting 4:3, but it seems in the crossover with FCP HD codecs there is some conflict trying to playback 4:3 using hi-res codecs (something better than SD PAL def). The included Film Academy setting (2048x1536) plays back without stretching, but this is REALLY hi res and is about double the rendering time. maybe I'll try downrezzing the Film Academy setting...

  • TS5150 i'm having trouble with the sound during playback on my apple tv

    theres no sound during playback on my apple tv

    Welcome to the Apple Community mdez3799
    Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
    If you are using a sound system/receiver, make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
    Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device?

  • Playhead randomly JUMPS to the end of the timeline when "editing" during playback

    CS 6.0.1
    OSX 10.7.4
    I love the new feature in CS6 that lets you edit DURING playback, and playback won't stop. Brilliant.
    Now, I use this feature a lot making cuts as I go. I use the "command + shift + k" combo to make an edit to all tracks while the playhead is moving along. It seems though that every so often when I do this, the playhead warps to the end of the timeline. Very frustrating, and when dealing with long timelines,really slows me down, to get back to where I was working.
    Also I can repeat this "glitch" very easily, so its not some totally random occurance. Just pushing cmd+shift+k while the playhead is moving a few times repeats it very quickly.
    Am I doing something wrong here? Or toggling some OTHER key command inadvertently? Or is this a legit glitch?
    EDIT: I would like to add that using the "nudge" command during playback has the same glitch of arbitrarily jumping to the end of the timeline if you click the nudge command quickly in succession.

    This issue was NOT resolved by manually installing all cs6 updates that were failing with adobe product manager, then doing a clean installation of the latest drivers from Nvidia's website using the ODE (Optimal Drivers for Enterprise) Graphics Drivers.
    The issue came back after editing for a little bit., however this following fix worked:
    *FIXED BY ADOBE TECH SUPPORT INDIA*
    The solution was to delete all media cache files and all cache settings for the specific project.   Check all your cache locations and encoded media file locations.
    Rebuild project on load.... edit.    Thanks.

  • Skips & Scratch Noises during playback ...

    I am all of a sudden getting skips & scratch noises during playback on certain albums during playback on Itunes and it transferred over to my ipod ... What could be causing this and how can I get rid of it.  ( No it is not the CD it was burned from cause it sounds perfect playing on other devices)
    thanks for any ideas or tips :-)

    I have observed this with my 4th gen Nano. The sound is pristine through the headphone jack, but when connected via some (older) dock devices there are little bursts of static every few moments.
    I have tried this with a Bose Sounddock and a Tivoli iSongbook. Same thing. The little static bursts are NOT repeatable (random), and do NOT appear in headphones. Most people would probably never notice this noise, especially if they play only rock music. Music with less percussive sound reveals the problem more easily.
    The very same files played through the dock devices on my old 3rd Gen iPod sound perfect.
    I was getting ready to ask Apple to exchange my Nano for another to see if that has any effect. Other than this issue, I love it and it works great.

  • No sound while recording but I can hear during playback

    I plugged my iRig HD in my macbook air (Yosemite), opened garage band and configure input output settings. While I was recording couldn't hear any sound but during playback I could hear clearly everything. I haven't got any problem on Amplitube 3. Is there any different settings on garage band?

    What if I want to use mac's speakers or an external speaker
    As long, as are not recording using the internal microphone it should work to change the output in the GarageBand Preferences > Audio to System Settings and to set the System Preferences > Audio > Output to the internal speakers or the internal output , if you have speakers plugged in instead of your headset.

  • I'm seeing a strobing effect during playback of clips and timeline in FCP7. How do I fix?

    I'm seeing a strobing effect during playback of clips and the timeline in FCP7. Footage isn't corrupt. Apple techs said its not hardware after their tests at the Apple store. I did a full reinstall of FCS. There's 4GB of RAM free at all times during playback. The problem is still there... How do I fix this?
    Strobing:
    By strobing, I mean there's only about 1 ever 10 frames playing back for me. Everything is rendered and the comp settings match the clip settings. It's not constant though, but the strobing is triggered at certain points on the timeline and effect a few clips after that (10 seconds or so at a time), and then when the next clip is displayed on the timeline the strobbing stopps and is reset back to normal playback... until another random clip is encountered by the playback head to which then the process repeats. Also, when strobbing is happening and I move the playhead back a few seconds, or pause & play, or even forward a little on the same strobbing clip (basically when i inturrupt the playback process) the strobbing STOPS! I can watch the same footage that was strobing without it strobing any longer until I move back the playhead far enough and try again, then the strobing is triggered again. I hope this all makes sense, it's very picular and I've seen or heard of nothing like it in my 4 years of editing in FCP7.

    SStrange my enough the problem started occurring a few hours into the project. The only thing I can think of is that I shot with all Canon 5D mark iii footage when I usually shot with a mark ii. My workflow hasn't changed and I have never had this problem. I've also used other mark iii footage in the past without a problem but I don think I've edited entirely with mark iii footage

  • NO AUDIO DURING PLAYBACK ON TIMELINE

    Ever since I tried using the Narration tool in Premiere Elements 12, I have had nothing but problems with audio.  The narration tool itself cause Premiere to crash.  I decided not to use it again, but I continue to have problems.  I can hear audio in the clips when i play them through the source monitor, but if I drop it on the timeline, then there is no audio during playback.  I've already checked my audio output settings and I've already tried restarting Elements and my Macbook.  I've even tried to change the audio output devices just to make sure I didn't screw it up when trying to activate the microphone for narration.  Please help!
    *NOTE - this is only a problem in the current project.  When I made a new project, it played back fine.  The problem is that I have hundreds of assets that I've renamed with descriptive file names, as opposed to the formatted file name the camera gave them. 

    Good morning Steve.
    Yes, there is a waveform on the clips.  However, when I open Audio Mixer, I do not see any audio registering. 
    Also, I do not have a USB microphone plugged into my computer. 
    Finally, I have done the Audio Hardware check.  I have tried using both "Built in Output" and "System Default Input/Output" but neither works. 
    Not sure if it helps to know this, but I have also tried to add music files to both Audio 1 track and also Soundtrack track.  Neither one will play back audio on the timeline, even though I can clearly see the waveform on the file.  It also does not register on the audio mixer.  This tells me that it;s definitely an issue with this specific timeline.  Is there any setting or mute button I may have accidentally changed?  None of the mute buttons are checked off in the audio mixer.

  • Zoom in and pan trough video during playback?

    Hi,
    is it possible to zoom in and pan trough video files during playback on iphone 3gs? I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback? Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
    Thanks

    I is it possible to zoom in and pan trough video files during playback on iphone 3GS?
    Yes.
    I know that there is a zoom inside accessibility inside settings but is it possible to use that during video playback?
    Yes. Three-fingered double-click to turn it on or off. Three-fingered drag to move the zoomed image.
    Sometimes during playback I need to enlarge some parts of video in a way to read numeric settings or something similar.
    The video will have been compressed for use on the iPhone, so zoom may help, but it won't be able to show detail that was lost in the compression.

Maybe you are looking for