Album shuffle not right with 3.1.1 update

After updating to the latest formware last week, I hit a new issue: If you have multiple albums with the same name, by different artists, such as something obsure like 'Greatest Hits', album shuffle mode ignores the different artists, and shuffles between the albums. So instead of hearing all of Elton John's Greatest hits, and then some other album, I have a mix of Elton John, Simon and Garfunkle, and Benny Goodman, and The Outlaws. Not what I really wanted, and if I did, I'd put it on song shuffle.
Has anyone seen this before the latest release, or is this a new feature, and does anyone at Apple know if there are plans to implement this correctly?

Some people have reported that Updating iChatUSBCam
and deleting the Macam drivers and then the
com.apple.ichat.plist is the way to go.
Thanks for your help!! I tried these things before, but tried them again in the order you suggested with no success. I'm pretty sure it is not a UVC compliant camera. It's not on Logitech's list of UVC cameras.
M/N: V-UBG35
P/N: 861228-0000
PID: CE6420A
If I try it without the Macam drivers it doesn't show up as a camera is connected at all.
It's so frustrating because it was working great with iChatUSBCam until the recent update. It still works in Skype with no problems, but I'd rather be using iChat if I can - much better video quality.
Thanks for any suggestions!
Matthew

Similar Messages

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • My safari will not open with the new iphone update

    my safari will not open with the new iphone update...help

    Hi Robin,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I would first suggest you restart your iPhone to see if the issue persists.
    iOS: Connecting to Wi-Fi
    http://support.apple.com/kb/HT5569?viewlocale=en_US
    Cheers,
    - Judy

  • My new iPad will not sync with itunes. itunes is updated to lastest version. Do I need to uninstall itunes and reinstall?

    My new iPad will not sync with itunes. itunes is updated to latest version. Do I need to uninstall itunes and reinstall?

    That could be a solution. Are you getting any error messages or error codes? Is the iPad recognized in iTunes? Does anything happen at all when you try to Sync? Can you provide more details?
    You can try a very simple first step, quit iTunes, reboot your PC and restart the iPad.

  • My ipod touch calendar is not syncing with outlook 2007 after updating itunes

    My ipod touch 4g, ios6.1 is not syncing with outlook 2007 since updating itunes last month.Also my calendar entries i added before one
    month are missing in my ipod touch.Those entries are automatically deleted from my outlook and i found those entries in the deleted data
    folder in my outlook. Even new entries i added in my ipod touch later are also not syncing with outlook.

    See:
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    or
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

  • Photos album names not syncing with iPhone

    I'm having trouble with the new Photos application.  I've renamed several of my album names on the app, but in iTunes the changes are not being recognized and thus not syncing to my iPhone either.
    Separately, several albums have "x" number of photos in them, but when I sync that album to my phone less than "x" photos actually flow into the album.  It's frustrating.
    I have rebooted everything (phone, computer, etc.) and I'm running the latest version of all software, so those basic fixes will not work here.  Any ideas?!?  Thanks in advance for your help...

    Solved here...
    Photos app not syncing with iTunes

  • Shuffle not working with iTunes Match when 3G is not enabled and the track playing is not the one showing (previous one)

    When I use Music on m iPhone on 3G with the downlod disabled on 3G, shuffle is not working.
    It stops after each track, as if it was not capable to find the next local track.
    Morevoer, it plays a track and show another one. It seems it plays the previous track but show the following.
    This makes my iPhone not usable with iTunes Match unless I disable show tracks from iCloud.

    Hi Bhushan,
    Isuse is with IIS Process. Whether its running on 32bit or 64bit. that's the one who decide which dll they want. So, in above the resolution is 
     If you are working with 32 bit you can use 
    string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework\v2.0.50727");
    while the other way for 64 bit IIS Process, you will require 
    string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework64\v2.0.50727");
    Hope this answer will helps some other developers issue.
    Regards, Brijesh Shah

  • Import via Drag & Drop not working with LR CC (after Update from 5.7)

    I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
    This does not work with LR CC anymore.
    The longer way via "Import" works fine.
    Any suggestions?

    With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
    What works with your setup doesn't work with mine.
    I attached a screenshot:
    As you can see (cursor) i can't import the file from the file explorer on the right.
    (The file is not already in the catalogue and i am in the library tab grid view mode).
    Using Windows 7 x64 prof Service Pack 1

  • Itunes not connecting with store & won't update iphone 4

    First, please don't tell me to look through the archives, because I already did and can't find a solution.  If you have 5 hours to search for me, please do so and let me know what thread the answer is in.
    After the second to last itunes update (back in July/August, maybe?), itunes would not connect to the store.  When I went to update my iphone to the latest software, it would start backing up and then stay there forever.  When the next (latest) itunes update popped up a few weeks ago, I was thrilled because I thought the problem would be solved.  No dice.
    I've uninstalled, reinstalled, and updated.  The only thing I haven't done is downgraded but that is because one, I can't find an old version of itunes, and two, I read in other threads this didn't work anyway.  I've deauthorized and reauthorized my computer.  That didn't work.  I can't sync, update, or back up my iphone. 
    Does anyone have any other advice???
    Thank you!
    PS I just noticed that somehow I DO have the latest version of the iOS, but not sure how this happened since the iphone never connected with itunes.

    Had some time at lunch to work on this issue. On my Win 7 PC I noticed the Apple USB drive had an ! mark on it in the device manager. I right clicked on it and updated driver software. I picked the automatically search for new driver. Now it works.

  • My 4th gen iPod Touch does not work with Ford sync since updating OS

    When I updated my iPod to the new os, it does not work with my ford sync system anymore. how do I fix this?

    Have lots of issues with Fords MySync and here's some info that might help....
    Using ford sync interface, goto the phone section, then settings, and look if your iPhones name is listed, if so select the phone name thru sync interface and remove/delete it from the sync list, then go thru the Bluetooth pairing process again.
    If that doesn't work, do the same on the iPhone, select ford sync entry in Bluetooth and remove sync or forget this device on the iPhone and then go thru Bluetooth pairing again.
    If that doesn't work Power off iphone ( not sleep) hold power button till you see red slider to power off. Then restart iphone, try pairing up again.
    If that doesn't work go back to MySync and goto phone settings and use the up-down slider till you see sync master reset. Confirm then go thru BT pairing again.
    If that doesn't work there is a fuse for the my sync system. Fuse box is usually behind kick panel of front passenger seat side for the Mustang #3, its behind a paper black cover. Remove fuse for 5-30 secs then replace.
    Lastly, make sure your MySync Firmware is the latest vers. Mines 4.0.2 goto fords MySync support page to check
    http://www.ford.com/syncmyride/
    or call 1-800-392-3673 Opt 3
    A google search might help for your model and year if not a newer mustang and you couldn't get to ford.
    Good Luck

  • IMessage not working with new iOS 6 update

    Updated my phone today with the new os update and now my imessage seems to not be working. Anyone else? Help?

    Go into Settings-General-Reset-Reset Network Settings (this will cause you to forget your WIFI network passwords you have entered) but I have found doing this to help me when I had weird imessage/texting issues.
    https://discussions.apple.com/message/19739709?ac_cid=tw123456#19739709
    This helped me with Activation problems with Imessage/Facetime.

  • I get constant notifications to update to a safer and better Firefox. I've tried many times with no success. Now it tells me my computer is not compatible with a newer or updated version of Firefox. What can I do to make it more compatible?

    Mac mini OS X 10.5 Firefox 3.6.13 dmg

    You could use firefox 3.6, which is old but still supported and secure. However the best solution is to give up on using Google Toolbar because Google no longer support it with firefox, mainly because it has little to offer.
    You can still save google bookmarks by copying them into Firefox. Please have a look at
    * [[google Toolbar is not compatible with Firefox]] <-- clickable link -- <br> which may help with some ideas and proposed solutions.
    I am hoping the Norton report you refer to merely says your system has vulnerabilities, rather than that it has an actual infection (or that it has dealt with or quarantined any malware).

  • Firefox's latest update could not cope with the latest java update. So my computer is not functioning normally. Why?

    I just downloaded the latest firefox. I got a message that there was something about the latest java that it could not cope with. I did not think that it would be a problem so I downloaded. However when I loaded up the betfair page I could not get the list of sports to come up. So then I started clicking on symbols to f.ind a help button. I am not very computer literate. I eventually clicked the bookmarks button and tried to look at an item but ended up with a reduced size homepage overlaying the bookmark page and It seems to be stuck.The restore item on the history page is not working so what can I do?

    If you mean this one:
    It's the orientation lock, it stops the display rotating when you rotate your phone.
    You can turn this on/off from the control Centre which you can reveal by swiping upwards from the bottom of the screen.

  • Track List and Grouped Album Art not right

    I purchased a 2 disc album from iTunes. I did nothing but click buy. I have not changed any default settings. When viewed under "+view grouped with artwork+", most tracks are separate instead of being grouped together under one album image. There are a few that are grouped together randomly. For example: +track 1 of 16 on Disc 1+ is with +track 1 of 15 on disc 2+, or +tracks 3, 4, 5, & 10 of 15 Disc 2+ are grouped together.
    Another problem is with the order of the tracks. When I downloaded to my iPhone, the tracks are out of order. For example: +#16 of disc 2 is now #1+, +#1 of disc 1 is now #17 of 31+.
    Finally, The artwork downloaded to my iPhone for most, _but not all_ of the tracks.
    What on earth am I doing wrong!?!?
    Thanks for your help

    I've since started over from scratch with a 'clean' phone.  Formatted the SD Card, created Music & Videos folders & copied all respective files using a card reader with the PC.
    SD Card installed in the phone & when switched on ALL tracks appear in respective artist/album location - only once.
    Connecting the phone to the PC to add new albums results in all new albums being detected once BUT with NO artwork (cover image).  Deleting an album results in that being deleted the list available in the 'Music+Videos' App.  Copying the album back results in that being detected BUT with no artwork.
    Trawling through the web, I've discovered a brilliant app MPAtool which magically restores the missing artwork. It's not 100% effective as it doesn't necessarily locate all artwork, but these can be found manually either by , locating them in Music or, if that also fails, copy the artwork to 'camera roll' & point MPAtool to that location.
    So far, I've had no more duplications & all albums have their respective artwork.
    It is also important to ensure that the MP3 tag is 100% correct.  Using Winamp to rip my CDs to MP3, the CDDB imports the information for artist, album, track etc & populates all the necessary locations without error.  However, some earlier MP3 tracks that I have had had erroneous entries which confuse the Windows 8 software.  Also when ripping albums with more than 1 CD, Winamp identified each CD as 1/2 & 2/2 with track numbers 1 - n on each rip which Windows 8 interprets as 2 albums.  I prefer to see all CDs in an album as one & use Tag & Rename to ensure at references to 1/2 & 2/2 are removed & track numbers are changed accordingly.

  • Photo Event/Album Thumbnail not Synched with iPhoto

    Hi and tnxs for reading.
    Is there a way to sync my iPhoto Album/Event Thumbnails with my iOS devices? I am noticing that on them, only the first photos are used as thumbnails.
    Tnxs, cheers

    1) why is this not an automatic feature? I mean, do I have to manually trash that folder every time I do modifications and need to sync them or is it supposed to autoupdate automatically sometimes?
    You shouldn't have to. This should update automaically.
    I see that my thumbnails are not synched aswell. In iPhoto Events/Albums I can select a thumbnail. However, on my iOS devices photo library, the thumbnail is the first photo of the Event/Album. Any chance to syncautomatically the same thumbnail I have in iPhoto
    I have no idea. I'd ask that on a forum for your Phone/Pad/Pod...
    Regards
    TD

Maybe you are looking for

  • GL account posting when billing doc saved

    Hi to all,               Please make sure the term. How GL account posting when billing document saved or it release to accounting? Thanks.

  • T61 dim display

    Dim display, external video ok, lcd comes on when lid is shut & opened then goes dim. I have seen this problem on older laptops with a stuck lid closure switch ... can't  find one on this laptop though ... HELP!??

  • Can't delete custom color profile

    I created a custom color profile and now it won't let me delete it, the delete option is grayed out. I have looked in the colorsync profile folder and it isn't there either. Does anyone know how to delete it? Message was edited by: Chad3405

  • JNLP runtime classpath

    I have a JNLP file which downloads a single jar file. the problem I have is that it depends on two other jar files from Oracle which would normall be installed on the client already. I do not want to download them with my application, mearly referenc

  • Unlock slide not responding

    Unlock slide is not responding. i restored and updated to latest sw, but no success.I reset phone with menu button and on/off. no success.