Alcatel 1353sh (HPOV NNM B.05.01) equipment view not showing

HP UX 11.0 Xsession client set up on a Tarantella 3.4 SUN Unix Server. In
Xsession users can open application (Alcatel 1353sh) which is based off of
HPOV NNM B.05.01. However, any attempt within the application to open and
"equipment view" for any element fails. This process used to work on
Tarantella 3.3 SUN Unix Servers. The equipment view is executed by right
clicking on an element and selecting "Show Equipment". Would be curious
if anyone utilizing HPOV NNM has seen a similar problem? Can't figure out
if this is font translation related or Java related?

Hi David, thanks for the feedback,
Previously, we had utilized the 3 button mouse option under "Advanced" to
resolve this problem (with mixed results - it initially fixed it but
later, the problem would resurface). So the 3 button mouse box is already
selected for this xsession application. For some reason it still does not
work. I'm possibly suspecting a java issue (java1 or 2 issue?) or a font
issue. I'm not really sure.
We have other Java based applications running on user PC's.
David wrote:
Daniel,
Under the Attributes tab of the application, please select "Advanced", and
then make sure that you check "Application supports 3 button mouse only".
Then please launch the application and try the "Equipment View" again.
Please let us know if this helps or not.
Regards,
David
"daniel healey" <[email protected]> wrote in message
news:d3iq4i$d8k$[email protected]..
HP UX 11.0 Xsession client set up on a Tarantella 3.4 SUN Unix Server. In
Xsession users can open application (Alcatel 1353sh) which is based off of
HPOV NNM B.05.01. However, any attempt within the application to open and
"equipment view" for any element fails. This process used to work on
Tarantella 3.3 SUN Unix Servers. The equipment view is executed by right
clicking on an element and selecting "Show Equipment". Would be curious
if anyone utilizing HPOV NNM has seen a similar problem? Can't figure out
if this is font translation related or Java related?

Similar Messages

Equipment mailbox not showing partial days on calendar for certain user (in month view).

We have one user that is having a problem with viewing Equipment Mailboxes.
We are running Exchange 2010 version 14.02.0328.009. Client machine is running Outlook 2010 x86.
The mailbox is a check-out vehicle that he and one other person manage. When someone sends a request to the van, it books it for that time, then doesn't allow others to book it for that same time as expected. However, some users don't like to do their own
booking so they have him do it for them. Several times now he has went out on the calendar (actually 3 different vans, all respond the same way) and booked a van on a day that looked available to him, only to find out on that day that two different people
show up expecting that same van. One person booked it on their own, and he booked it again. It never gave a prompt to disallow him or tell him it was taken from the attendant. However, for the other guy that manages the mailboxes it looks just fine, for me,
for many other users I've compared with, it looks and responds as it should.
I have checked the settings on the equipment mailboxes as well as compared his Exchange account with the other person who is working as expected, they are identical. The thing that I've found is that if someone books a van for an 'all day' event, he sees
it just fine. If they set it up for a partial day, it never shows to him in month view.
Looking at the calendar permissions for the mailbox both of the people have equal rights. I tried setting this person to owner to see if it helped, to no avail. I also tried setting the "Show As:" to free, busy, tentative, out of office, all respond
the same way.
It seems to show up when he does a schedule view, but from a month view, nothing shows and it allows him to book the van. For everyone else that I've tested, it responds as expected.
I have deleted and recreated his profile on his local machine, and he even recently got a whole new desktop so it shouldn't be anything local (has been going on for many weeks), but I honestly have no idea why it's doing it. Any suggestions from the gurus
on here would be appreciated. Thanks!

Hi,
Since the issue only happens when this specific user view the equipment mailbox's calendar in Outlook monthly view, please access this user's mailbox in OWA and view the equipment maibox's calendar and send test meeting requests to have a try.
If the issue also happens in OWA, please run the following cmdlet to check the equipment mailbox calendar configuration:
Get-CalendarProcessing equipmentmailbox | fl
Regards,
Winnie Liang
TechNet Community Support

Equipment Number not showing after created through IE01

Hi,
We have created a Equipment through IE01...after it system shows a message - Equipment XXXXXXXX and asset XXXXXXX created...
But when we want to see it through IE03 or in master table EQUI (or in all equipment related tables), this is not showing...
Also system showing information - Express document "Update was Terminated" received from author "XYZ"...
Pleas guide..

No....not using User Exit...
But in SM13, this is showing an Error in Status column...
After db click on it, showing like this...
1..     ITOB_CALL_BADI     V1     Initial
2..     MCI1_STATISTICS_UPD_V2     V2     Initial
3..     CLVF_VB_INSERT_CLASSIFICATION     V1     Error
4..     STATUS_UPDATE     V1     Initial
5..     BG00_WARRANTY_LINK_UPDATE     V1     Initial
6..     OBJECT_NUMBER_INSERT_GENERIC     V1     Initial
7..     ITOB_BUF_EQ_SAVE_UPD_TASK     V1     Initial
8..     ANLA_WRITE_DOCUMENT     V1     Initial
9..     RA_ASSET_MODIFIKATION     V1     Initial
As indicated on 3rd line, showing error...
and after db click on it, showing an popup..in which giving Error Details -
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
If duplicate record exists, then where they are??? No Table updated....
Plz guide..

Hiding a Equipment view in a transaction iq01

Hai Friends,
             How to hide a Equipment view in a transation for create material serial number (iq01).
Regards,
Sathis Kumar R

Hi Naresh,
Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
when you define the subroutine, it will ask you creat a mian program, in this main program, you need 'INCLUDE lsvcmcod'.
Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
INCLUDE lsvcmcod.
FORM yourSubroutineName.
DATA: viewname TYPE vclstruc-object,
        error_flag TYPE vcl_flag_type,
viewname = 'ZTEST_VIEW1'.
* PERFORM vcl_set_table_access_for_obj USING    viewname
*                                       CHANGING error_flag.
----> according your condition to change the view.
IF xxx = yyy.
DELETE vcl_struc_tab WHERE object = viewname.
ENDIF.
ENDFORM.
regards,
Archer

Bulk activation of Equipment View in serial numbers

Hi Experts,
Our client has erroneously created material-serial numbers which needs to be active the equipment view. There are around 2000+ details to be changed and a bulk change option is required to active "Equipment View".
I have tried to create a LSMW but ended unsuccessfully.
Appreciate you valuable guidance to find a solution
Thanks In Advance

Thanks for the prompt reply.
I have only tried LSMW.
We have set mandatory the "Location" field for equipment. There for when i execute the LSMW, following appeared
'Formatting error in the field ITOB-STORT'
'Fill in all required entry fields'
Thanks

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

HT1595 I am not able to connect from my laptop to airplay mirroring equipment, icon is not showing on my laptop.

I am not able to connect from my laptop to airplay mirroring equipment, icon is not showing on my laptop. It does show when I hook up a HDMI wire to the apple TV box.

I think you mean Ethernet, not HDMI wire. If the airplay icon is showing up when wired then that would indicate an issue with your wifi network.

R3AS Equipment download not working with filter

Hi, all
I set filter equipment in r3ac1 and then I executed initial download Load Object EQUIPMENT in r3as.
but occur abort EQUIPMENT in r3am1 and outbound queue MASS_CRM_CS_EQU_* and R3AD_CS_EQU_* are stop in R/3
there are entries 1.
I apply Note 838174 - Equipment download from R/3 to CRM and Note 1224016 - Filter condition for EQUIPMENT is ignored but same problem.
I wonder one thing queue R3AI_EQUIPMENT is status blue in SMW01 .
What is table can I check initial download equipment ?
ref. CRM2007 SP 17
R/3 620
please any help
thanks

hi,Lee Jun Seok :
I think you shoud active the badi implementation 'CRM_EQUI_LOAD_STDIMP' .
If it is inactive ,the equipment can not be downloaded for ECC.

Not showing all equipment order in zreport ( SAP-PM)

Dear Sir,
I am working monthly perfomance report related of SAP -PM. which that show data of equipment order wise. these order is create plant wise.
i am fetching data through plant code and order final date .
***selection-screen*******
t001w-werks OBLIGATORY,
p_spmon TYPE s115-spmon OBLIGATORY,
in this program i am using tables AUFK, AFIH, and EQUZ.
My problem is that this report is not showing all data for only one plant. becoz only two line item show in Table EQUZ according order date and plant. and in table AFIH showing 10 line time. whenas 63 order has been created in that date .
so, i want know that where is problen either my program or standard table EQUZ
Plz guide me ......................
Moderator Message: Basic Question . Thread Locked.
Edited by: kishan P on May 12, 2011 12:39 PM

Dear sir,
I want fetch equipment no. of order from EQUZ. when i pass date from 01.03.2011 to 31.03.2011 then showing only one equipment number in EQUZ table.
when as 63 orders has been created between 01.03.2011 to 31.03.2011 which are showing in table AUFK and AFIH.
in my z report i am using table EQUZ for equipment no.
so, i don't understand that why not showing all eqipment number in EQUZ table between 01.03.2011 to 31.03.2011
this problen for only one plant (459B), rather than other plant (like 460A, 470A....................) all data are showing in my report.
Plz guide me......................

Equipment View Profiles????

Dear All,
I have a question about the equipment views profiles
After creating eq. category X there was four standard views BUT after creating the view profile and assign it eq. category only the views in this profile appear and the other four is not appear ??????
As i know the profiles is created to add new tabs/screens why the standard ones is not appear and what is the solution.
thanks in advance

hi
What are the four standard view that doesn't appear. Even if yuo do not assign the view profile to the equipment category ,system will display some standard view while creating equipment master like General data.Location etc.if you assign the view profile to the equipment category then it will overrite the standard one .hence whatever the tabs mentioned in the View profile will only get displayed
regards
thyagarajan

Equipment number not saved in AS02

Hi All,
Client is trying to link equipment number to asset master via change asset AS02.
After saving the asset master they are not able to see the equipment number.
We did the below customization and also implementer OSS notes 1329249 but nothing seems to be working.Please note client does not want to create new equipment number he want to link existing equipment to asset (AS02)
If anyone has solution for this issue please share with me...
SPRO--> Financial Accounting --> Asset Accounting --> Master Data --> Automatic Creation of Equipment Master Records.
Edit asset master record
Create equipment NO SYNCHRONIZATION
Change equipment NO SYNCHRONIZATION
Edit equipment master record
Create asset NO SYNCHRONIZATION
Change asset DIRECT SYNCHRONIZATION AFTER SAVING
SPRO--> Financial Accounting --> Asset Accounting --> Master Data -->Assign master data fields of assets and equipment
5 BUKRS Company Code BUKRS Company Code
10 TXT50 Description SHTXT Equipment descriptn
15 INVNR Inventory number INVNR Inventory number
20 KOSTL Cost Center KOSTL Cost Center
25 WERKS Plant SWERK Maintenance plant
30 STORT Location STORT Location
35 GSBER Business Area GSBER Business Area
40 LIFNR Vendor ELIEF Vendor
45 HERST Manufacturer HERST Manufacturer
50 LAND1 Country of origin HERLD Country of manufact.
55 ANLN1 Asset EQUNR Equipment
Thank you in advance...
Cheers,
Blessy.

Dear:
Your question contains answer ... Please change "Change equipment NO SYNCHRONIZATION" into DIRECT SYNCHRONIZATION AFTER SAVING and also make sure that Synchronization button is on in AS02 for relevant assets in Allocation tab. Please do this and revert back. Please also refer to an excellent article about PM & AA synchronization. Hope it will help you solve your issue.
http://help.sap.com/saphelp_46c/helpdata/en/4f/71db54448011d189f00000e81ddfac/content.htm
Regards

Equipment Internal Note

Hi,
I need a automatic popup of Internal note maintained in Equipment Master during Notification creation.Is this possible without any userexit?
Secondly,how is "Classification View & Display" in Obect Info Customising done?How can I customise views for classification?
Please provide step by step guide.
BR,
Rajat

Create an excel spreadsheet which logs on to SAp and extracts the data via an RFC or BAPI
See [here|http://www.google.co.uk/url?sa=t&source=web&ct=res&cd=1&ved=0CAcQFjAA&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F608058b4-81b7-2910-4598-8a66dcdba0a8%26overridelayout%3Dtrue&ei=YUH9SsTuGp_bjQfuytCJCw&usg=AFQjCNHuNR-TDxYSzjUG3sT3oA1jG8RaVg] for more details

Changes on equipment are not saved at the backend (MAM30_031)

Hi,
if I change some equipment data e.g. street and city on the client, this changes are not done at the equipment in the backend. Status of MAM30_031 is I-Finished which holds the correct changed data inside. But if I now look into the equipment at the backend, there's still the old data. Changes done at the backend are synchronized fine to the client, but not the other way.
Any idea why this doesn't work?
Thank you and regards,
Florian

Hi Florian,
here is what I would do:
1. Check in "O-Sent" in a sequence which is a response for the change in equipment what is the status of your change. There should be something like, "All top updated successfully...", or "Conflict...", or "BAPI return...". That will give you and idea what happens with your change.
2. If you "Successful"... message or no message - that is garanteed BAPI problem. You should open OSS message to SAP (component XAP-MBA-MAM).
Which version of MAM3.0 SR3 you are running? There is Patch02 which I know for sure has some fixes for technical object change fucntionality. (If you are on the lower version: reintsallation will be required, there are SynBo changes either in Patch01, or Patch02, don't remember exactly which).
Cheers,
Larissa Limarova

Bapi / F.M. for creation of install base for equipment (CS, not CRM)

Hi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
Andrea

Hi everybody,
Do you know any bapi / F.M. for the creation of an istall base, with one equipment and several materials?
Thank you
Andrea

MD04 Does not show Service orders for owned equipment

Hi,
Is there a way to make MD04 - Material Stock Requirements List, to show a particular type service order? Our loaner equipment is owned by us and goes through Repair after it comes back from a customer. We create service orders for those materials and when running MD04 we would like to see those service orders as supplies.
Thank you very much,
Sergiy

Unfortunately, third party purchase orders have nothing to do with my issue. My case is service orders, repair orders for the materials we own. MD04 shows requirements as these loaners are going out to customers on customer repair orders. When they get back they get repaired and put back into our own stock and then shipped to another customer on a loaner program. If the service order is scheduled to be completed we would like to know how many are coming back into stock and make decisions based on requirements in MD04. Therefore, I would like to have MD04 show those service orders as supplies.

Alcatel 1353sh (HPOV NNM B.05.01) equipment view not showing

Similar Messages

Maybe you are looking for