ALD Failed to conect to Sap Business One

Hi, i install a client in my PC, so when i log in in SBO,so SBO tells me that i need install ALD "its ok, i need it", the install runs rigth, and now i have ALD in my client, i close SBO and openin again.
Therefore in the init, before i can´t make anything, send me a system message error "Resource error", i click ok, inmediatly another system message "initialization failed" click ok, then another error out of SBO, header "SAP Business One Outlook Advanced Layout Designer", body "Failed to conect to SAP Business One"
After click Ok, in the last message, i can work with SBO but i can not open ALD, no even print preferences " the 5° check box".
i did everything i think, reinstall, reg scan, a new DB in sap, nothing works.
so i someone can help me, thaks to everyone.

hi Sergio Guillerm... ,
Check this link with subject Resource error,solution given by Rakesh pati.
Resource error

Similar Messages

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

SAP Business One 9 on HANA - AddOn "AddOnName" Installation Failed

Hi,
I'm trying to install an add-on in a SAP Business One 9 on HANA (64 bits) but i'm facing a problem:
- The add-on installation (from the add-on Manager Form) on windows finish correctly, but after a few seconds the system shows a Message box with "Please wait for add-on installation to finish .....Select Yes if installation finished succesfully, otherwise select No" . After that (YES option selection) the system shows "AddOn [AddOnName]: Installation Failed"
The making of the .ard file (AddOn registration file) was the same that the generation of .ard file for the SAP Business One 9 for SQL Server (here the addon works correctly). The only difference was the replacement of the DI API dll, UI API dll, AddOnRegGenerator and the AddOnInstalAPI.
Please Help!..
Thanks...

Hi,
When generating the ard file for the installer, there is a property that defines whether the addon is a 64bit addon.
https://websmp202.sap-ag.de/~sapidb/011000358700000247582013E/SDK_CompGuide_90.pdf
Create Add On for 32 bit and 64 bit computer SAP Business One 9.0
The above link may helpful to you.
Regards,
Silambu

Fail to connect DB via DI-API on SAP Business One 9.0 for HANA

Hi,experts.
I am coding a sample program using VB.net on SAP Business One 9.0 for HANA.
But this problem fail to connect DB.
The code relevant to connect DB is below.
============================================-
SAPbobsCOM.Company.DbServerType = 6
SAPbobsCOM.Company.Server = ServerName:30015
SAPbobsCOM.Company.UseTrusted = False
SAPbobsCOM.Company.DbUserName = SYSTEM
SAPbobsCOM.Company.DbPassword = ********
SAPbobsCOM.Company.CompanyDB = CompanyDBName
SAPbobsCOM.Company.UserName = manager
SAPbobsCOM.Company.Password = ********
' Connecting to a company DB
RetCode = SAPbobsCOM.Company.Connect
============================================
(Result) RetCode = False
(Expected result) RetCode = True
I think this is a commonly difinition on SAP Business One for HANA.,
but I can not find any useful information...
Could you give me advice about this problem?
Best regards,
Yuka Masuda

Thank you for your reply, Maik.
I changed DbServerType from 6 to 9,
and the program works!!
I appreciate your useful information.
Thank you.
Best regards,
Yuka Masuda

Addon not loading - B1 Usability Package for all users in SAP Business One

Hello, I am a new admin to SAP B1 and am about to go live in a few weeks. We are running SAP Business One v. 8.80.227.
Envirorment details: Dedicated server for SAP database, and Terminal Server for remote connections.
I have a demo group of users in Active Directory that have permission to Remote Desktop to the TS and load SAP. For now, theses users are local admins on the TS. ( Permissions to be revised once addon issues are worked out ). I am the companies tech, and we have a SAP implementation company leading the project development.
Currently the addons that we are running are CRSB1Addon SAP 8.8 and B1UP from boyumit.
For one of the users in the Active Directory Security Group all the addon's work great. However the other users get the error below;
When logging in the system message window shows the following:
Failed to assign SAP Business One user license to SAP Add-ons. The Add on is configured to automatically load on startup, yet once I get the error, I open the Add on Manager and I don't see the B1UP in either tab at all.
The error on the TS in the log is here:
Log Name:      Application
Source:        Application Error
Date:          18/03/2010 10:55:25 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OVCL-TS.laurieroptical.local
Description:
Faulting application SAP Business One.exe, version 8.80.227.0, time stamp 0x4b8fadd4, faulting module ole32.dll, version 6.0.6002.18005, time stamp 0x49e037d7, exception code 0xc0000005, fault offset 0x000472da, process id 0x1f14, application start time 0x01cac6a4a2da01c9.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-18T14:55:25.000Z" />
    <EventRecordID>3778</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OVCL-TS.laurieroptical.local</Computer>
    <Security />
</System>
<EventData>
    <Data>SAP Business One.exe</Data>
    <Data>8.80.227.0</Data>
    <Data>4b8fadd4</Data>
    <Data>ole32.dll</Data>
    <Data>6.0.6002.18005</Data>
    <Data>49e037d7</Data>
    <Data>c0000005</Data>
    <Data>000472da</Data>
    <Data>1f14</Data>
    <Data>01cac6a4a2da01c9</Data>
</EventData>
</Event>
Any comments would be greatly appreciated.
Thanks
Edited by: dontforgetken on Mar 18, 2010 4:05 PM

hello Ken - Boyum IT has its own License Administration - path of Administration > Add Ons > B1 Usability Package > License Administration...
Do all of the users have a checkmark to give them access???
When a user has only the Main Menu window open, select the "Form Settings" icon and follow the same path on the Form Settings window that is diplayed and make sure they have checkmarks next to the B1 Usability Package to be "Visible".
Are all of the user set to display Boyum IT on their machines???
LOL - I am not technical so I have no idea what that other stuff means...
Hope that helps...
Zal

Crystal Reports Dynamic Parameters with SAP Business One

Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One.
Let's start with the software versions:
- Crystal Reports 12.3.0.601
- SAP Business One 8.8 (8.80.231) SP: 00 PL: 13
- Windows XP SP3
(SBO Server on Windows 2003 and SQL 2005)
What I'm about to describe is something I've tried in several reports and for which I created a very, very simple test report to see if it was reproducible in a very simple situation.
- I connected to a Business One server through CR's SBO connection type. Logon is successful, tables are shown.
- I pick OCRD and plac CardCode and CardName in the details section on the report. Previewing the report shows data.
- I create a dynamic parameter on CardCode and in the Select Expert I select the CardCode field and define that that should be equal to the parameter.
- I preview the report again. Now it asks me in such a parameter screen for logon credentials. It shows the server and database it tries to connect to and in the username it shows the SQL Server username I used to connect to the SQL Server in the first place. However, the password for that user is not accepted. I also tried to login with the Windows administrator user and with the SBO manager user, but no success with any attempt.
I also tried to add a static parameter and add all database values to the list. Same screen, different result:
Crystal Reports 2008 wrote:
Logon Failed.
Error in File UNKNOWN.RPT:
Unable to connect: incorrect log on parameters. (rptcontrollers.dll)
(On a side note: the report is saved as report1.rpt)
Anyone else got similar issues and found a solution?

Hi,
When you have fixed your crystal installation following the note posted earlier, please take a look at the [how to guide|http://service.sap.com/sapidb/011000358700000882232009E.pdf] and also at the [e-learning|http://service.sap.com/sapidb/011000358700001370262010E] about SAP Business One 8.8 and Crystal Reports.
There are so called "tokens" which you need to use instead of dynamic parameters.
Dynamic paramters don't work in SAP Business One 8.8, if they are not defined as a static paramter with token.
Best regards,
Darius

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Cannot connect SAP Business One with iPad

Hey all,
I am new to SAP Business One. And i am exploring SAP Business One Mobile Applicaiton for iPad.
I've tried to follow the step to set up my both SAP Business One and iPad but failed.
The message "Connecting to server" keep loading and after few minutes show me "Tje request timed out (-1001)"
So am I did something wrong? Or miss out something?
Please advice with this problem.
Thank you.
Regards,
Wai Leng

Hey Lisa,
Yes, I've tried what I found in this forum and the Support Portal.
But it's is failed again.
As iPad doesn't really need a mobile phone number, so i just simple key in a number for both SAP B1 and my iPad. Is it any problem?
Another question, I've tested my connection for B1D1, but failed, following is the error message.
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-107) Unable to connect with the specified username and or password
Anything i miss out?
Thank you.
Regards,
Wai Leng

Import Crystal Reports Dunning letter as SAP Business One layout

Hello,
I have created a dunning letter in Crystal Reports. I want to import this layout as a layout (not a report) in Business One.
Problem is that I don't know the parameters in the report so I can import the layout between the standard PLD layouts (like Dunning 1, dunning 2 dunning 3 dunning all etc). I tried a few but import fails everytime. You also don't get any errormessage when the layout cannot be imported.
Anybody knows what parameters to use in this report? Thanks.
Regards Thijs

Hello Gordon/ Rahul,
Thanks for yor reply.
I already created a Crystal report that runs as a report. In this case you select the WizardName and the report will give an output of all dunning letters in this report.
Unfortunately it is not possible to import this report because when I do that I only get the error that SAP Business One couldn't import the layout. EXporting a layout is af course not possible because only PLD layouts are available in dunning.
Regards Thijs

Upgrade to SAP Business One 8.8 - Legal List Format

Hi All,
I am currently experimenting with the upgrade process from 2007A PL46 to SAP Business One 8.8 PL5.
On some company databases that I try I get the error Legal List Format - Failed during the database upgrade process. Does anyone know what this refers to and how it can be fixed?
Many thanks,
Damian

No it's a very clean installation in the sense that it is a database that has only run against the core SAP Business one. the only add on that would have been used during the original set-up would have been copy-express and DTW.
The company data i am using is a copy of our own corporate data, nothing fancy as we are an SAP partnership so no real inventory even.
d

Installing SAP Business One 8.8

Hello people,
I cant install SAP Business One Server in the Database UserID and Database Password i dont know what to put in I installed MYSQL Server 2005 .. I read in the internet that the default one is sa and the default password is B1Admin but everytime i type it in it says "The Connection to the specified server has failed..Check your password and that the server exist on the network".
I tried making another login in the SQL Server Management Studio Express.. But when i put it in the Database UserID and Password it says the error.I dont know what to do next i tried google but SAP B1 Opensource installation is no where to be found even in youtube.

Hi,
you may try this following SAP note solution:
The connection to the specified Server has failed.
Symptom
The connection to the specified Server has failed.
Check your password and that the server exists on the network
Other terms
Installation,Upgrade,login details,Installer,Unable to upgrade
Reason and Prerequisites
Consulting
Solution
In the Installshield the length of the combobox for selecting SQLServer name is limited to 24 charactes.
For example if the server name is PRODUCTIONSERVER\PRODUCTIONDATABASE.
Since the instance name is exceeding 24 characters the full server name will not be provided.
Please use(local)\PRODUCTIONDATABASE OR .\PRODUCTIONDATABASE, instead
of entrying the wholestring

Outlook Add-On in SAP Business One 8.8

Hi Experts
I recently Upgraded to SAP Business One 8.8
I installed Outlook Add-On (I installed Outlook server, outlook .ard file and Outlook stanalone) when I start the add-on its is connected and it gives a message Initialization Failed.
So I cannot see the 'create default templates' screen.
But the strange thing is when i click syncronize in outlook it can syncronize all datas and it also creates snapshots for business patners.
My question is how I can fix the error says initialization fails and how to send emails from SAP business one using Outlook.
Thanks and regards
Vinodh Kumar

Hi Vinodh Kumar,
What is your OI version? I am afraid there is no 8.8 compatible version ready yet.
Thanks,
Gordon

Trying to install SAP Business One 8.8 on a clean Windows 7 professional pc

Hi, i am trying to install SAP Business One V 8.8 on a clean Windows 7 professional laptop. I need to install the server and client sides. I have already installed SQL server express 2005.
When i try to to install the server software I get the error message 1628 installation failed almost straight away. I ket the same message if I try and install the server tools, SBo server or outlook integration.
What am I doing wrong?
Thanks in advance
Simon

Hi Simon,
Solution to Problem ID :1618
Try the following Steps :
1. Clear the 'Temporary' Folder of Windows 7 : Start ->Run->%temp%->Press 'Enter'->Select All & Delete
2. Restart your machine. (This is Must)
Actually it keeps an image of the previous installations, so always for re-installation you need to perform this steps.
Same is with Win 2008 Server editions also.
Now proceed with the installation and remember always run SBO installations in Windows 7 and 2008 Server by clicking on 'Run as Administrator'
Hope your problem would be solved.
Regards,
Saikat Roy

Error while 'Crystal Report for Sap Business One' addon started

Hi,
I have try to install Crystal Report for Sap Business One (Addon Versione number 2.0.0.7).
The installatione finish succesfully, but when I started the addOn i retrieve this errore message: External Connection to the dataBase failed. Sap Crystal Addon may not function properly. Please re-run the account setup with superuser login.
I'm logged in Sap with manager (super user), so maybe I have forgot some step in the installation?
I have see the Demo in the Channel Partner Portal, I have note that I have to isntall the CR_Runtime_12_0, but I don't find it, I don't know where I can download this file. I have just installed SapCrystalSetup.exe and registered the Addon like a normal Sap B1 addon.
Where is the error??
Regards
Marco

You must configure in each cliente Pc the connection with the DATABASE.
You must Know the Database Super User (In SQL Server usually sa, and its password, the standard form SAP Business One is SAPB1Admin)
In Administration > Crystal Reports Administration > Account Setup
The CR_Runtime_12_0 is only necesary to view reports, but isn't necesary to start de addon.

SAP Business One v8.8 (PL12) - Upgrading

Hello Forum
this is my first post so apologies....
I am trying to establish a SAP B1 v8.8 test environment on a 'offline' server. I am encountering 2 issues when installing/upgrading...
Original environment:
         HP ProLiant Server
         5gb RAM
         Windows 2003 R2 Enterprise Server
         (Service Packed and Updated from Windows Update)
Firstly,
    SAP Server Tools / Server / Client will all install using a base of PL05, I can then upgrade this to PL10 (both of which were supplied by our Partner) - I operated on this PL level for a week or so with no trouble what so ever. Later I recieved PL12 on a disc from our Partner and went through the upgrade process from PL10 to PL12.
   This failed showing 'Creatordll.DLL' error straight away when the process started to upgrade the SBO-COMMON database. I could see the Server Tools get upgraded first and then the SBO-Common database getting backed up and as soon as this has completed the error happens. The upgrade then rolls back (Restores) the SBO-Common and then stops advising also that the Server Tools will need a manual restoration.
   MS Visual C++ 2005 Redistributable Package was the only reference that I could find on SDN so I followed the instructions here.
Amended environment:
         HP ProLiant Server
         5gb RAM
         Windows 2008 Enterprise Server
         (Updated from Windows Update)
Secondly,
   When attempting to troubleshoot this problem, the directory "C:\Program Files\SAP\SAP Business One Server " has only the B1_SHR available in Windows Explorer. When I check this against our LIVE environment using SAP B1 2007a the same directory has "B1_SHR \ DI API \ SAP Business One DI API \ B1iServer \ B1iSetup" listed.
When in the PL05 or PL10 environments SAP operates perfectly fine despite the fact that there is no other directories showing here. The base install and upgrade to PL10 completed without error so I had no need to investigate the SAP Business One directory until PL12 failed.
I'm hoping that someone in the Forums can help me out with these issues.
Thanks

Hi Garry,
I would suggest you to download the latest installation package on 8.8 PL10 which is available on the Service Market Place. In order to solve the issue with 'Creatordll.DLL' please follow the steps from the Note [1408662|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1408662]. Issue could be caused due to missing Microsoft ATL security patch.
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

ALD Failed to conect to Sap Business One

Similar Messages

Maybe you are looking for