ALE and BAPI
What is the differnce between ALE and BAPI.??
Hi,
ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
Regards,
Anil
Similar Messages
-
Scenario's related to ale and bapi's developments and customizing
hi can u help any one of u in sending scenario's related to ale and bapi's developments and customizing
Hi
By using table you can get tax percentages against tax condtion types. For values you have to use fuction module calculate_tax_item
1. SE11 - EKPO - contents - PO number - execute Note down tax against field MWSKZ
2. SE11 - A053 - contents - tax code - execute, Note down tax condtion record number and validity
3. SE11 - KONP - contents - conditioin record number - execurte, Note dow tax percentages against each condtion type
Raju -
ALE,EDI,IDoc,OLE and BAPI
plsease give the detailed concept for ALE,EDI,IDoc,OLE and BAPI
awaiting reply
thanks
Moderator Message: The long waiting ended...
Edited by: kishan P on Jan 9, 2011 7:38 PM<<non-detailed concept definitions removed by moderator>>
Edited by: kishan P on Jan 9, 2011 7:36 PM -
Data transfer - ALE or idocs and bapis
hi ,
thank you guys for the support.
i am into a data migration project.
i need the initial setup for the idocs and bapis.
i dont know anything about these so can u send me the process for the setup and the data migration process too with idocs and bapis.
i didnt understand when they asked me if we can data migrate with a ALE, is that the same as using idocs and bapis or is it a different approach.
u can send me at any inofrmation connected to my eamil addr.
i would really appreciate that.
thank you.have a look at the links
hope they will help u
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
links on bapis
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
http://www.erpgenie.com/abap/bapi/example.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
http://www.allsaplinks.com/bapi_example.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
For More Info check this thread.
https://forums.sdn.sap.com/click.jspa?searchID=2721366&messageID=1761503
Do reward if helpful -
Data migration ALE or idocs and bapis
hi ,
thank you guys for the support.
i am into a data migration project.
i need the initial setup for the idocs and bapis.
i dont know anything about these so can u send me the process for the setup and the data migration process too with idocs and bapis.
i didnt understand when they asked me if we can data migrate with a ALE, is that the same as using idocs and bapis or is it a different approach.
u can send me at any inofrmation connected to my eamil addr.
i would really appreciate that.
thank you.Hi,
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
for VA01 use BAPI_SALESORDER_CREATEFROMDAT2
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Thanks and regards,
Sarada -
Different between ALE, IDOC and BAPI?
Hi Folks,
What is the different between ALE, IDOC and BAPI? and send me the following steps?
Thanks in advance.
SivaHi,
please read the below lines.
ALE
ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
BAPI
BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
Pros and Cons for both BAPI and Call Transaction
BAPI
One of the big plusses for BAPIs is that the interface and function are not supposed to change. This is a big plus when you do upgrades or hot packs because the transaction can change (format, required inputs etc) which means you then need to update the call transaction.
Some of the BAPIs are better documented and easier to use than others.
You usually need to perform the BAPI that actually does the COMMIT after you call your BAPI.
The Program coding for calling a BAPI is usually cleaner than setting up the screen flow etc for the Call Transaction.
You don't need to worry about special data circumstances interrupting the normal data flow of the screens and causing errors because of that.
BAPIs probably have better performance since they don't do the screen flow processing.
In general if the BAPI exists for the transaction you want to perform and you can figure out how to use it the BAPI is probably the best way to go.
This is just from my experience working with both BAPI and Call Transaction. I have had some very good successes with BAPIs, but very occasionally found that I could not get the BAPI to perform the update I needed.
Regards,
Anki Reddy. -
Im new here in SAP,
so i ask for help on how to configure BAPI, ALE and IDocs please....And
what are those objects? Tnx! Godbless us<b>Hi ,
These are some links for ALE/IDOCS.
http://www.erpgenie.com/sapedi/index.htm
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi2.jhtml
http://www.sapgenie.com/sapedi/edi_sap_training.htm
http://www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
http://www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
http://www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
http://www.easymarketplace.de/online-pdfs.php
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.onestopsap.com/interview-Question/ale/
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Please check this link for EDI/ALE/IDoc online documentation.
http://www.easymarketplace.de/online-pdfs.php
Thanks
Manju.
Helpful reward points.
</b> -
Last question on ALE and VA01 : how link ALE and VA01 ?
My aim is to send via ALE sales orders when created with transaction VA01 or when modified with transaction VA02.
I have done a lot of customizing and create module function and so and so.
Now what I don't know is how it's working! When I create a sales order with transaction VA01, what I have to do, to make a relationship between transaction VA01 and my IDOC?
It's automatic and I have forgotten some customizing?
Use an Use exit to call the Module function?
Create a workflow on events ?
Or ????
I have created a function to populate and distribute Idocs
but by which action this function will be called during the sales order creation ?
I have used transaction BDBG to link ALE interface and BAPI, WE41 to link process code to function module.
If some one have a little solution, wellcome
HenriHi Henri,
I wish I could help you more
But please check this online documentation which will help you to understand and configure the ALE/IDoc for sales orders.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDEDI/SDEDI.pdf
Again, let me know if you need further assistant.
Regards,
Ferry Lianto
Please reward points if helpful. -
Hello Masters,
What Makes the exact difference between RFC and BAPIs. Both can perfom same thing. BAPI uses the RFCs only. Then how can it justify?
Thank youRFC:
RFC --- > Function module and general will be used to make call to function
sending the function (XI has RFC adapter)
BAPI:
BAPI ---> Other version of RFC (Objected oriented) mostly we will use for Sync
calls (Mostly in XI using proxies we will call BAPI's)
Refer these links for more details:
http://sapabap.iespana.es/sapabap/sap/faq/ale_idocs_bapi.htm
http://www.sap-img.com/fu033.htm
BAPI Vs IDOC - in detail
http://searchsap.techtarget.com/tip/1,289483,sid21_gci824860,00.html
/thread/127699 [original link is broken]
IDOC,RFC,BAPI
Re: When and Why we use BAPI, RFC and IDOC.. in XI
Diff... between ALE, IDOC, RFC, BAPI, BADI --- Not clear and clarify
idoc and bapi
Difference among IDOCS,BAPI,RFC?
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
Differences Between RFC & BAPIS
RFC Vs BAPI
For more details:
refer this thread.
What are idocs, BAPI, RFC?
BAPI is nothing but the Business process programing interface which are standard and stable and these are store in the business object repository.
Standardized programming interface that enables external applications to access business processes and data in an SAP System
RFC is the remote function call which is used to call the function remotely which may be in same system or ather system
its also used communication between SAP systems , between SAP systems ,external systems.
idoc and bapi
Difference among IDOCS,BAPI,RFC?
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
Differences Between RFC & BAPIS
RFC Vs BAPI
http://www.sap-img.com/abap/ale-bapi.htm
RFC means remote function call,
these are the function modules which can help u to access across the sap and from sap to third party front end,
BAPI means Business application programing interface which is the RFC enable function module and uses in OOPS concept.
RFC ,IDoc and BAPI
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
This is a short description of BAPI and RFC
BAPI stands for Business Application Programming Interface. It is a library of functions that are released to the public as an interface into an existing SAP system from an external system.
RFC is the protocol used to call functions in an R/3 system by a caller external to R/3 or to call programs external to R/3 from an R/3 system. -
Hi All,
I am a Junior ABAP developer. I am new to EDI, ALE and IDOC's. Could someone help me out how to start with this and the necessary material required to go through!!
Thanks in advance!!HI Penchanta ,
Go through this links for additional information.
1.http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
2.http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
3.http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
4.http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
5.http://www.sapgenie.com/sapedi/index.htm
Regards.
Note: Reward if useful
Also check this link from SDN
(1) /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
(2) /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
(3)http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
(4) idoc
(5)http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2178a651ce11d189570000e829fbbd/frameset.htm--
--This is for Message Control. See the Left Pane in this web page to get the ALE implementation for BAPI's also.
(6)/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment - Converson Rules Guidelines -
Study material on ALE and IDOCS
Hi
If anyone has some study material on ALE and IDOCS ,if you can please send it across to me , it would be very helpful to me .
My mail id is : [email protected]
Thanks in advance
Ankit1. What is ALE?
Application Link Enabling (ALE) is a set of business processes and tools that allow applications on different computer systems to be linked. This can be done between different SAP systems as well as between SAP and non-SAP systems.
In a single SAP system different applications are integrated via a single database (e.g. finance, sales, production, human resources). However, many companies do not have just one integrated system but a distributed environment with different applications running on different systems. To run the whole business in such an environment the distributed applications have to be linked. This can be done through Application Link Enabling (ALE).
ALE provides distributed business processes that can be used to link the applications on different platforms. There are some ALE business processes delivered in the standard SAP system. Furthermore, there are tools that can be used to change the existing ALE business processes or to implement new distributed business processes.
Besides the business processes there are special ALE services that are required to set up and control a distributed environment. These services include a distribution model, business object synchronization and tools for monitoring or error handling.
ALE is a major part of SAP's Business Framework Architecture. Besides the basis middleware, that provides the communication between components, and the interfaces (BAPIs), ALE business processes and ALE services enable the cooperation of the single components within the framework. That makes ALE the glue of the Business Framework.
2. What are the benefits of ALE?
With ALE companies get the opportunity to improve business performance and to solve organizational or technical issues.
Through distribution you can decentralize your business, enabling local units to operate independently from each other. This flexibility enables the local units to return better business results than in a centralized environment. They have the necessary flexibility to optimize business processes in different organizational units and can ensure that information systems can handle the speed of change in rapidly expanding markets. Distribution allows a high level of freedom, provided that this level of freedom has been clearly defined.
On the other hand, some companies, that already have a distributed organization with different computer systems in the local units, have the opportunity to link their units through ALE business processes. This enables them for example to provide a 'one face to the customer' approach. Another area that can benefit through ALE are virtual organizations (partnerships between independent companies, joint ventures and mergers and acquisitions).
Of course, in many cases an integrated solution based on a single system is not possible at all. Some applications used by a company can not run on the same computer system. This includes legacy systems or complementary software. It may also be possible that a company uses different SAP industry solutions or specific country solutions, which do not run on the same SAP System. If these applications run on different systems they can not be linked by a central database but have to use a special integration mechanism like ALE. In this way ALE also links SAP Core Systems to other SAP components like CRM, Business Information Warehouse or APO.
Besides the benefits of having an improved flexibility in setting up the whole business processes, ALE may also reduce costs, in particular costs of upgrading. If the whole business is run on one integrated system you have to upgrade the whole system, even if only one part of your company (e.g. human resources) requires an update. So the entire company is affected by the upgrade project and all users have to be trained for the new release. Within a distributed environment with release independent interfaces, like those provided by ALE, you can focus the upgrade project on that part of the company that has to be upgraded. The other parts of the company are not involved and need no training. This can save a lot of money. Furthermore, existing investments are protected.
Another cost factor for distribution might be communication costs. For an overseas connection it can be more expensive to provide online access to one central system (T1) than to connect distributed systems to each other (64K line).
There might also be some technical reasons for distributed systems. If some parts of the business have special requirements for security of data access (e.g. human resources), this can be set up much safer on a standalone system, which is, however, linked to other parts of the company through distributed business processes. A similar example is high availability. High availability is usually required by the operations part of the company (production, logistics) but not by other areas (e.g. financials, human resources). In a distributed environment high availability can be set up for specific parts of the environment instead of for the whole business. This can also reduce costs.
In a distributed environment you can not decrease the overall workload of the systems but you can separate the user workloads on different systems. Through this scalability you can improve performance. Another benefit of distributed systems is that if a technical failure occurs on one system, all other systems continue to operate. Only a small part of the business is disrupted by the error. On one central system such an error would disrupt the entire business.
3. When should ALE be used?
Besides the benefits of ALE there are also reasons not to distribute:
The functional scope in a distributed environment is restricted. Not all functionality that is available in an integrated SAP system can be used with distributed systems in the standard yet. Although ALE provides tools to create new ALE business processes or to enhance existing business processes, this does involve additional expenditure.
Each company needs some organizational standards and data harmonization. In a distributed environment less standards are required than on a single integrated system. However, in a distributed environment the maintenance of the standards and the data harmonization is more difficult than on a single system.
The administration of decentralized systems is more expensive. Support and service costs for hardware and software in decentralized systems are higher than these costs in a single centralized system.
ALE should be used in a company if the benefits of ALE for this company outweigh the reasons against distribution. For this you always need to carry out a company specific investigation, in which you also should consider the culture of the company. ALE is good for some companies but not for all.
4. What is the relationship between ALE and Middleware?
Electronic Data Interchange (EDI) is a term for the transfer of business messages between two systems. There are many such messages, the most common of these include a customer sending a purchase order message to a vendor, or a vendor sending an invoice message to a customer. Classic EDI is mainly restricted on the exchange of transactional data, no master data or configuration data. In most cases, EDI replaces the transfer of paper copies of these documents. Via the messages ALE business processes can be implemented between business partners. The EDI messages also use the ALE services.
For the communication between different types of systems special EDI messages are defined as standards for inter company communication. There are many standards for these messages - in the United States, the ANSI X.12 standard is the most prevalent, in Europe, the UN/EDIFACT standard is used. For sending EDI messages the information has to be converted into an EDI standard. With SAP systems this is done by EDI subsystems. This conversion is the only difference between EDI messages and other messages used in ALE business processes. The processing of these messages on the SAP System is the same as the processing of other ALE messages.
5. Which ALE business processes are available?
IDoc Types - Message Types
ALE business processes are integrated business processes that run across distributed systems. This can be two different SAP systems, links between SAP and non-SAP systems, SAP and Web-servers (Internet Application Components) or SAP and desktop applications. The links between the systems may be loosely (asynchronous) or tightly (synchronous) coupled. These business processes are release independent and can run between different release levels of the systems.
Many SAP applications offer ALE distribution processes. The following list gives some examples:
Master data replication (IDoc Types - Message Types - Master Data)
- Material
- Customer
- Vendor
- General Ledger accounts
- Bill of materials
Accounting (IDoc Types - Message Types -Accounting Business Processes)
- Links to logistic systems
- Distributed financial accounting
- Distributed cost center accounting
- Distributed special ledger
- Profitability analysis
- Distributed profit center accounting
- Consolidation
- Treasury
Logistics(IDoc Types - Message Types - Logistics Business Processes)
- Reallocation of materials
- Distribution of sales and shipping
- Product data management
- Purchasing contracts
- Sales and operations planning
- Warehouse management
- Links to warehouse control systems
- Links to production optimization systems
- Links to transport planning systems
Information systems (IDoc Types - Message Types - Logistics Business Processes)
- SAP Business Information Warehouse (BW)
- Exchange of data between information systems
- Web reporting
Human resources (IDoc Types - Message Types - HR Business Processes)
- Human resources as a single component
- Payroll results
- Travel expense accounting
- Links to time collecting systems
However, these standard solutions may not fit 100% for a company. There may be differentiation in the business process or a required distributed business process is not supported in the standard. If this happens, ALE provides tools that can be used to adapt a standard ALE business process or to create a new distributed business process.
6. Which ALE services are available and what do they do?
To integrate distributed systems you need more than a communication infrastructure and interfaces. Some additional services are required that are provided by ALE:
Business process harmonization:
Within system overlapping business processes multiple functions running on multiple systems are involved and connected through multiple interfaces. The processes are combinations of functions (sub-processes) running on the single systems.
(Example: A business process for customer order management involves functions in sales, manufacturing, warehouse management, finance, and so on. It is possible that the sales functions are carried out on another system than the manufacturing, the warehouse management or the accounting. Furthermore, some information exchange with the customer, a supplier or a bank may be involved in the process.)
ALE helps to coordinate the whole business process by defining it within a global model. In this model the business rules for the distribution are defined. Via the model the sub-processes get to know which part of the overall process they have to do themselves and when they have to pass the process over to another system. Through this the whole business process gets harmonized.
Receiver determination:
For distributed business processes a sub-process on one application (client) has to start another sub-process on another application (server). It is important that the new sub-process is started on the right server. Which server is the right one can not be defined by technical values, it depends on the business content of the process.
(Example: A sales system forwards customer orders to two different production systems. To which system a special sales order is forwarded depends on the entries in the sales order (this may depend, for instance, on the ordered material or on the customer). One sales order may also be split into two or more different orders that may be forwarded to different production systems.)
To notify the client which system is the receiver of the communication (server), ALE uses a distribution model. From this model the applications get the information about the right server. There are special ALE BAPIs and function modules available for this. The receiver determination makes sure that the information is sent to the right places.
Business object synchronization (semantic synchronization):
If business processes run across distributed systems, they have to share some data to be harmonized. This is data like business information data, master data or customizing data. If this data is changed in any of the distributed systems, other systems have to be informed about the change. There has to be some kind of subscription of the data.
ALE provides a special service for this data synchronization. This service can detect data changes and distribute the information to those systems that need to know about the change. This service also defines which data is shared. You can determine which fields of a data object shall be common and which fields may vary locally.
Consistency checks:
For a business process running across two distributed applications there has to be some harmonization of the sub-processes in the single applications. For making sure that the sub processes are harmonized there are special ALE consistency check tools. These tools help to find and repair inconsistencies. By this it can be ensured that the whole ALE business process works in the right way.
Monitoring:
For the monitoring of distributed processes it is not enough to monitor all activities on the single systems. The overall business process has to be monitored. The ALE monitoring services provide detailed information about the communication process, the sub-process on the other systems and its results. Database links are created between the business objects in question on the client and the server. This is especially important for loosely coupled applications with asynchronous links. In this case the server can not give return values back to the client directly so that the ALE monitoring is the only channel for feedback.
Error handling:
Another problem with asynchronous communication is error handling. If an error occurs on the server the calling process on the client may have finished already. So the server can not return the error message to the client. A special error handling process required. This process is one of the ALE services. It uses workflow functionality to identify the error and to start the required error handling.
7. Synchronous vs. asynchronous links?
When distributed applications are linked by ALE business processes, the question often arises as to how tight the link should be. Synchronous and asynchronous links have both advantages and disadvantages.
Synchronous links have the advantage that the sub-process on the server can return values to the sub-process on the client that has started the link. Problems with synchronous links occur if the communication line or the server is temporarily not available. If this happens, the sub-process on the client can not be finished (otherwise there would be data inconsistencies).
(Example: There is a logistics system and a financial system. Every stock movement in logistics has to be posted in the general ledger of the financial system. If the link between logistics and finance is synchronous, no stock movement can be recorded in the logistics system if the communication line to the financial system is down.)
Because of this, synchronous links are usually used if the client only wants to get some data from the server and the sub-processes on the server do not have to write any data to the database.
With asynchronous links the sub-process on the client can be finished even if the communication line or the server is not available. In this case the message is stored in the database and the communication can be done later. The disadvantage of asynchronous links is that the sub-process on the server can not return information to the calling sub-process on the client. A special way for sending information back to the client is required. In addition, a special error handling mechanism is required to handle errors on the receiving side.
Asynchronous links are used if a synchronous link is not applicable. For the problems with sending return information to the client and with error handling there is some support from the ALE services.
8. Which kind of interfaces do ALE business processes use?
ALE business processes are integrated processes across distributed systems, requiring interfaces between the systems. These interfaces have to be stable to enable the communication between different releases and to reduce the impact of release changes within the distributed environment.
In SAP R/3 release 3.0 and 3.1 ALE uses IDocs as interfaces. An IDocs is a data container for transferring messages asynchronously. They are release independent. Since SAP Release 3.1G BAPIs are a new type of object oriented, stable interfaces that can be called synchronously or asynchronously. Asynchronous BAPIs use IDocs as data containers. ALE business processes can use BAPIs as well. In the future new ALE business processes will use BAPIs as interfaces. But the existing IDocs will still be supported. In time, BAPIs will be created with similar functionality to existing IDoc interfaces.
9. Why does SAP uses ALE instead of database replication or distributed databases?
Database replication is another possibility for doing business object synchronization. However, there are some major disadvantages with database replication. At the moment database replication is database dependent and release dependent within one database. This makes database replication impossible for the use with non-SAP systems and even for the replication between SAP Systems you have to make sure that all systems are running on the same SAP release and the same database release of a single database vendor. Furthermore, with database replication you cannot do things like field conversions or version changes. ALE does not have these shortcomings because it offers application driven data replication independent of the underlying database.
Another technology, distributed databases, is no alternative for ALE at the moment, either. There are some good results of distributed databases available, but the performance is far from sufficient for using it with larger applications like SAP.
10. What is the relationship between ALE and middleware?
For distributed business processes many different services are required. Most of these services are offered by SAP. For some of these services you can also use products that are provided by SAP's complementary software partners or by other companies:
The communication service for doing the pure communication is usually done via Remote Function Call (RFC). RFC is provided by SAP for most platforms both for synchronous and asynchronous communication. There are other messaging systems for the communication service available as well, like IBM's MQSeries. However, the communication between SAP and the messaging system is still done via RFC.
For the serialization of asynchronous communication the RFC provides little functionality at the moment. The serialization has to be checked by the application. ALE offers some support to do these checks. The serialization of the RFC communication will be improved in the future. Serialization services are provided by some of the existing messaging systems, but even they can not guaranty a 100% serialization of the communication, since they use RFC for the connection to SAP.
The monitoring and error handling of the communication is done via services provided by the RFC and ALE. If messaging systems are used for the communication they also offer some monitoring and error handling functionality.
If a non-SAP system is involved in the ALE business scenario and this system does not understand SAP's BAPI or IDoc interfaces, the data has to be mapped to any interface structure that this system offers. For this mapping SAP does not provide a service but it certifies mapping tools from software partners. These tools are called ALE translator. The most known product in this area is probably Mercator from TSI International Software. The same kind of mapping can also be done by 'EDI converters'.
Another type of middleware products offer process ware. This is mainly a combination of the communication service, the mapping service and a set of rules for the mapping. Some ALE translator can be used for this as well.
Receiver determination is one of the ALE services (see above). Parts of this service can also be provided by some of the messaging systems, but you cannot use these systems without using ALE receiver determination.
For the other ALE services like application monitoring, application error handling, semantic synchronization and business process harmonization, there are no middleware products available as a replacement of ALE.
ALE is open for the use of middleware products for the distribution, but in most cases the additional middleware is not necessary. In a communication between different SAP systems usually the use of additional middleware makes no sense at all. For the communication between SAP and non-SAP systems there might be some benefits, especially if the middleware is used at the company already. The only middleware tool that is really required if the non-SAP system does not understand BAPIs or IDocs is an ALE translator.
Check different sites for more information.
Regards -
Business Objects and BAPI (SAP-ABAP)
Hi Friends,
Could anyone help me about followings:
1) what is Business Objects, SAP Business Objects in SAP ?
2) Why it is used ?
3) what is BAPIs, why it is used, How it is works actually ?
4) we have ALE and EDI to communicate data between SAP-SAP and SAP-NonSAP respectively.why we go for BAPIs?
5) What is OOPs,how it works in realtime ?
Please treat it as urgent.
Thx in Adv.
BobbyHi Bobby,
Answers for your OOPS question
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
++++++++
Helpful links and examples ........
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
http://www.erpgenie.com/sap/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Thanks, Aby Jacob -
Hi Friends,
I would like to know where can i get FAQs on ALE/Idoc and BAPI..
Thanks..
AbdulHere are some links
http://searchsap.techtarget.com/general/0,295582,sid21_gci1110008,00.html
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://help.sap.com/saphelp_nw04/helpdata/en/43/b46c4b53c111d395fa00a0c94260a5/content.htm
Regards,
Rich Heilman -
Hello All,
I am newly join in IT company (Name don't want to specify) . They have putted me in a consolidate project in which I do have to work on IDOC,ALE and EDI object.
yet in my career with SAP ABAP I haven't work on the above mention terms of SAP. Can some One please guide me and provide me some material to prepare my self best for the things.
Regards
Swati NamdevSome use full Tcodes:
ALE / EDI/ IDOCS TRANSACTION CODES
Transaction Code Description
WE02 List Of All Idocs Created. (Default, Additional, EDI)
WE05 List Of Idocs Created. (Standard, Additional)
WE06 Active Monitoring For Idoc Processing.
WE07 Idoc Statistics.
WE08 Display View u201CFile Statusu201D:Overview-Path Name.
WE09 Idoc Search For Business Contents (Database).
WE10 Idoc Search For Business Contents (Archive).
WE12 Modification Of Outbound File, Triggering Inbound Processing.
WE14 Process All Selected Idocs.
WE15 Selection Program For Issuing Output.
WE16 Trigger Inbound Processing.
WE17 Trigger Status Processing.
WE18 Generate Test Status File For Outbound Idocs.
WE19 Test Tool For Idoc Processing
WE20 Partner Profile.
WE21 Ports In Idoc Processing.
WE23 Display Test Catalog Test Idoc Interface.
WE24 Maintain Table View. Direction-1.(Outbound)
WE27 Maintain Table View. Direction-2.(Inbound)
WE30 Develop Idoc Type.
WE31 Develop Idoc Segments.
WE32 View Development.
WE33 Maintain Table Views.
WE34 Change View u201CTable Of Style Ids With The Objects To Be Loadedu201D
WE40 Display System Process Code.
WE41 Display View: Logical Msg Overview. For Outbund.
WE42 Display View: Logical Msg Overview. For Inbound.
WE43 Display Status Records.
WE44 Display Partner Types
WE45 Maintenance Interface: Forwarding Inbound/EDILOGADR For Application
WE46 Global Parameter For Idoc Interface.
WE47 Status Maintenance.
WE50 Display Text For Process Code System.
WE54 Idoc Function Module For File Name
WE56 Display Status Process Code
WE57 Idoc Assignment Of FM To Log. Message And Idoc Type.
WE58 Text For Process Code Status.
WE60 Documentation For Idoc Type.
WE61 Documentation For Idoc Record Type.
WE62 Documentation For Idoc Segment Type.
WE63 Documentation For Idoc Record Types And Idoc Types (Parser).
WE64 Process Code In Idoc Inbound And Outbound.
WE70 Conversion Table For Basic Types.
WE71 Conversion Table For Extensions.
WE72 Conversion Table For Field DOCTYP.
WE73 Conversion Table For Logical Message Type.
WE81 EDI:Logical Message Type.
WE82 Message Types And Assignment To Idoc Types.
WE84 Assignment Table Between Idoc And Application Field.
ALE / EDI/ IDOCS TRANSACTION CODES
Transaction Code Description
BD10 Send Material (Matmas)
BD11 Get Material.
BD12 Send Customer.
BD13 Get Customers
BD14 Send Vendor.
BD15 Get Vendor.
BD16 Send Cost Center. (Cosmas)
BD17 Request Cost Center.
BD18 Send G/L Accounts.
BD19 Get Master Data G/L Accounts.
BD20 Inbound Processing Of Idocs Ready For Transfer.
BD21 Creating Idoc Types For Change Pointers.
BD22 Delete Change Pointers.
BD23 Serialization Using Time Stamp: Deletion Of Old Time Stamp.
BD24 Send Cost Elements.
BD25 Send Activity Type (COAMAS)
BD26 Request Activity Type
BD27 Cost Center/Activity Types: Transmit Plan Quantities And Acty Prices.
BD28 Cost Center/ Cost Elements: Send Control Records.
BD30 Material Bom Distribution. (Bommat).
BD31 Document Structure Distribution. (Bomdoc)
BD32 Plant Allocation To Material Boms Distribution.
BD33 Distribution Of Material Variants. (STTMAT)
BD34 Distribution Of Boms (BOMORD)
BD35 ALE: Send Business Process Group.
BD36 ALE: Send Business Process.
BD37 ALE: Send Business Process Price.
BD40 Generate Idocs For Serialization Group From Change Pointers.
BD41 Dispatch Of Idocs Of Serialization Group.
BD42 Check Dispatch Status Of Idocs Of Serialization Group.
BD43 Processing Inbound Idocs Of Serialization Group.
BD44 Change View u201CSerialization Groupu201D.
BD47 Dependence Between Methods.
BD48 Dependence Between Methods And Message Type.
BD50 Activate Change Pointers For Message Type.
BD51 Characteristics Of Inbound Function Module.
BD52 Determine Work Area.
BD53 Reduce Message Type.
BD54 Change View: Logical Systems
BD55 Idoc Conversion.
BD56 Maintain Idoc Segment Filters.
BD57 Link Type And Serialization Type Of Message Type.
BD58 Convert Organizational Unit.
BD59 Allocation Of Object Type.
BD60 Additional Data For Message Type.
BD61 Activate Change Pointers Generally.
BD62 Display Conversion Rule.
BD63 Transport Of Ale Tables For A Message Type.
BD64 Display Distribution Model.
BD65 Maintain Idoc Type Required Fields.
BD66 Change Idoc Fields.
BD67 Function Module For ALE/EDI Overview.
BD68 Maintain List.
BD69 Assignment Of Idoc Type To Message Type.
BD70 Cross-System Comparison Of Number Range Objects.
BD71 Attributes For Receiver Determination.
BD72 Active Events For ALE/EDI
BD73 Start Error Handling For Non-Posted Idocs.
BD75 Status Conversion With Trfc Execution.
BD77 Generate Transport Requests For Distributing ALE Customizing Data.
BD78 Monitoring Ale Customizing Data Transport
BD79 ALE IDOC Segments - Conversion Rule
BD81 Filter Objects For BAPI Parameter Filtering
BD82 Generating Partner Profile
BD83 Re-Processing Incorrect Outbound Odocs.
BD84 Re-Processing Of Idocs After ALE Input Error.
BD85 Consistency Check: Reassignment Between Two System.
BD86 ALE Consistency Check: Create Purchase Order From Sales Order.
BD87 Select Idocs
BD89 Customizing Data Modeling For Distribution Model.
BD91 Distribute All Characteristics Via ALE.
BD92 Distribute Class Via ALE: Send Direct.
BD93 Distribution Of Classification Data Via ALE.
BD95 Ale Object View
BD96 Filter Object For Receiver Determination Of Methods.
BD97 Assign RFC Destination For Synchronous Method Calls.
BD98 Consistency Check With Workflow Link
BD99 Dependencies Between Message Types.
BD100 Display Serialized Idocs. (Serialization Using Object Types)
BD101 Serialization Using Object Types: Consistency Check.
BD102 Ale: Outbound Channel Registry. -
MATERIAL ON IDOC,ALE AND EDI
hi,
IF U HAVE ANY MATERIAL ON IDOC,ALE AND EDI PLZ SEND TO MY MAIL ID([email protected]) OR GIVE ANY SITE ADDRESS?hi,
for ALE/IDOC
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
http://www.sapgenie.com/ale/why_ale.htm
http://www.sapdevelopment.co.uk/training
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
for EDI
check these links.....
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.onestopsap.com/interview-Question/ale/
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Please check this link for EDI/ALE/IDoc online documentation.
http://www.easymarketplace.de/online-pdfs.php
good link
http://myweb.dal.ca/hchinni/sap/idocs/IDoc%20Cookbook%20for%20EDI%20and%20Interfaces.doc
If you need further info shoot me a test mail to [email protected]
Regards,
GNK
Maybe you are looking for
-
Can't add funds or purchase in app store?!?!
Trying to buy angry birds in space and I can't add funds or purchase the app. Says your request cannot be performed at this time please try again later... Anyone else having problems? Starting to get annoyed with apple's software issues. Bring Jobs b
-
Hi all, Basically we have users that will use dongles to work from home when they are not in one of our offices. We need the proxy settings to be disabled when they are not on the network and we dont really want the users having to change the setting
-
Hope u will send me the details of calling an applet from another
hai to all i am trying to do an applet ,and it corrct in jdev ide,but trying to run in explorer i cant connect the database, but in applet viewer also i cant call another applet throught a button or any thing i hope u will send me details and thanks
-
I have tried to purchase songs on iTunes tonight and my iPhone keeps telling me "Cannot connect to iTunes Store". I can listen to samples of the music I want, I am just not able to download them. Any suggestions??
-
Dear All Any suggestions ? Currently when we try and transport requests between systems, the transports are getting 'stuck' in the delivery stage (Truck icon) and not moving. I can add transport fine at unix level, all the RFC checks are ok. All the