ALE : BD10 & BD11
Hi Folks,
I have 2 questoins regarding ALE/IDOCS.
1- If we want to transfer some master data e.g any master data. Do we need to create message types for that, OR for all master data messagesa types are 'built in' in sap standard system like MATMAS.
2- Once we have configured everythign for ALE/IDOC, do we need to create distribution program for every master data which we want to distribute or they already exists and we have to use them like BD10 & BD11.
Thanks.
>
WDAbap wrote:
> 1- If we want to transfer some master data e.g any master data. Do we need to create message types for that, OR for all master data messagesa types are 'built in' in sap standard system like MATMAS.
> .
Some message types (and corresponding idoc and processing routines) are pre-configured in SAP. MATMAS is one of them. For other you can define your own message type.
>
WDAbap wrote:
> 2- Once we have configured everythign for ALE/IDOC, do we need to create distribution program for every master data which we want to distribute or they already exists and we have to use them like BD10 & BD11.
>
> Thanks.
Usually for each message type you have processing function module which, depending on the direction of message (inbound or outbound) create idoc from data or post data from idoc in system.
e.g. function module IDOC_OUTPUT_INVOIC for message type INVOIC create IDoc from invoice data
and function module IDOC_INPUT_ORDERS for created sales order (VA01) from incoming IDoc
Similar Messages
-
Hello Everyone,
Can anyone tell me as to how a posting program is create in ALE IDOC.As we have predefined posting program like BD10,BD11 etc.How do we create one for the custom made IDOCS.I expect a speedy response.
Thanking you in advance.
Regards,
Sirisha.Create new segments -- WE31
Create new IDOCs -- WE30
Create a new message type -- WE81
Link message type with IDOC type -- WE82
<b>Outbound program LOGIC</b>-<b><u>Posting program</u></b> with example
Select data from application tables
Fill data into IDOC
Pass IDOC to ALE layer
(Call function MASTER_IDOC_DISTRIBUTE)
Commit Work
REPORT zale_example.
Parameter for material number for getting related information
PARAMETER : s_matnr TYPE matnr.
Internal table for populating the control information for the IDOC
DATA : i_edidc TYPE STANDARD TABLE OF edidc INITIAL SIZE 0
WITH HEADER LINE.
Internal table for the communication control record
DATA : i_c_edidc TYPE STANDARD TABLE OF edidc INITIAL SIZE 0
WITH HEADER LINE.
Internal table for the populating the data record
DATA : i_edidd TYPE STANDARD TABLE OF edidd INITIAL SIZE 0
WITH HEADER LINE.
Structure for the storing material related information
DATA : struct_mara TYPE mara.
Structure for the storing the material description
DATA : struct_makt TYPE makt.
Structure for the segment to populate the record in the data record
DATA : struct_e1maram TYPE e1maram.
DATA : struct_e1maktm TYPE e1maktm.
Constants for the segment names.
DATA : c_e1maram TYPE edilsegtyp.
DATA : c_e1maktm TYPE edilsegtyp.
START-OF-SELECTION.
Get the application data from the tables MARA and MAKT
PERFORM get_app_data.
Populate the idoc.
PERFORM pop_idoc.
*& Form GET_APP_DATA
Get the Application data from the MARA and MAKT
FORM get_app_data .
Get the Material related information from the mara.
SELECT SINGLE *
FROM mara
INTO struct_mara
WHERE matnr = s_matnr.
Check for the sy-subrc value
IF sy-subrc NE 0.
Sy-subrc is not equal to zero go out of the program.
EXIT.
ENDIF.
Get the material description from the makt by using matnr
SELECT SINGLE *
FROM makt INTO struct_makt
WHERE matnr = s_matnr.
Check for the sy-subrc value
IF sy-subrc NE 0.
Sy-subrc is not equal to zero go out of the program.
EXIT.
ENDIF.
ENDFORM. " GET_APP_DATA
*& Form MOVE_TO_E1MARAM
populate the segment E!MARAM
FORM move_mara_to_e1maram .
Clear the segment
CLEAR struct_e1maram.
Pass the message type related information into the segment.
MOVE: "STRUCT_MARA-MSGFN TO STRUCT_E1MARAM-MSGFN,
struct_mara-matnr TO struct_e1maram-matnr,
struct_mara-ersda TO struct_e1maram-ersda,
struct_mara-ernam TO struct_e1maram-ernam,
struct_mara-meins TO struct_e1maram-meins.
Populate the internal table for the data record by passing the
Segment name and application data.
PERFORM pop_idoc_edidd USING c_e1maram struct_e1maram.
ENDFORM. " MOVE_TO_E1MARAM
*& Form MOVE_MAKT_TO_E1MAKTM
Populate the segment E1MAKTM
FORM move_makt_to_e1maktm .
Clear the segment
CLEAR struct_e1maktm.
Pass the message type related information into the segment.
MOVE : "STRUCT_MAKT-MSGFN TO STRUCT_E1MAKTM-MSGFN,
struct_makt-spras TO struct_e1maktm-spras,
struct_makt-maktx TO struct_e1maktm-maktx.
Populate the internal table for the data record by passing the
Segment name and application data.
PERFORM pop_idoc_edidd USING c_e1maktm struct_e1maktm.
ENDFORM. " MOVE_MAKT_TO_E1MAKTM
*& Form POP_IDOC_EDIDD
Populate the data record by passing the segement data
-->P_C_E1MAKTM segment name
-->P_STRUCT_E1MAKTM Application data
FORM pop_idoc_edidd USING p_c_e1maktm
p_struct_e1maktm.
Clear the work area for the data record internaltable I_edidd
CLEAR i_edidd.
Move the segment name
MOVE: p_c_e1maktm TO i_edidd-segnam,
Pass the application data
p_struct_e1maktm TO i_edidd-sdata.
Append the internaltable.
APPEND i_edidd.
ENDFORM. " POP_IDOC_EDIDD
*& Form POP_IDOC
Populate the Idoc with related information
FORM pop_idoc .
populate the control record
PERFORM pop_con_data.
populate the data record by first populating the header segment
PERFORM move_mara_to_e1maram.
Populate the data record by populate the data segment
PERFORM move_makt_to_e1maktm.
call the fM master idoc distribute for creating master idoc
PERFORM create_mat_idoc.
ENDFORM. " POP_IDOC
*& Form POP_CON_DATA
Populate the control record
FORM pop_con_data .
Variable for the logical system name
DATA: l_logsys TYPE edi_sndprn.
Get the logical system name.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
IMPORTING
own_logical_system = l_logsys
EXCEPTIONS
own_logical_system_not_defined = 1
OTHERS = 2.
Check for the sy-subrc value
IF sy-subrc NE 0.
Sy-subrc is not equal to zero go out of the program.
EXIT.
ENDIF.
Clear the work area of the control record
CLEAR i_edidc.
Move the partener type to the control record
MOVE : 'LS' TO i_edidc-sndprt,
Populate the sending system name
l_logsys TO i_edidc-sndprn,
Populate the type system partener used
'LS' TO i_edidc-rcvprt,
Populate the partner number
l_logsys TO i_edidc-rcvprn,
Populate message type
'MATMAS' TO i_edidc-mestyp,
Populate the idoc type.
'MATMAS03' TO i_edidc-idoctp.
Append the control record data.
APPEND i_edidc.
ENDFORM. " POP_CON_DATA
*& Form CREATE_MAT_IDOC
Call the FM MASTER_IDOC_DISTRIBUTE
FORM create_mat_idoc .
Call the FM MASTER_IDOC_DISTRIBUTE for passing the IDOC to ALE layer.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
master_idoc_control = i_edidc
TABLES
communication_idoc_control = i_c_edidc
master_idoc_data = i_edidd
EXCEPTIONS
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
OTHERS = 5.
Check for the sy-subrc value
IF sy-subrc NE 0.
Sy-subrc is not equal to zero go out of the program.
EXIT.
ENDIF.
ENDFORM. " CREATE_MAT_IDOC -
ABOUT DATA SENDING IN idoc TO file SCENARIO
How the data is sended in idoc to file scenario?
what is the difference in sending data through BD10, BD14 and WE19 ?
Is the data is sended through XI OR R/3 SYSTEM?Hi Rammohan
>> How the data is sended in idoc to file scenario?
Makeing settings in SAP R/3 side then based on the RFC
destination,port,parterner profiles.....
Idoc can hold the data with out any direction but RFC port will direct where to
go ...based on the partner profiles (Out buond IDOCS)
>>what is the difference in sending data through BD10, BD14 and WE19 ?
BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
generally will be in the production(But not for testing) and this will be depending
on the declaration of profiles in the BD64
--- But we19 will be used to test the Idocs with any data
but here we need to give all the parameters like senders,receivers,ls,idoc...
>> Is the data is sended through XI OR R/3 SYSTEM?
Data will send through XI i.e XI will receive the Idoc and Convert into XI specific
SOAP XML message and process all the pipe line steps ...based on the target
it will send
Here target is file so choose the file adapter as target and give all parameters
it will work fine
I hope this will answer your question
regards
--- prasad -
Material master upload to new SAP system
Hi,
Please help me to decide the procedure on migrating material master from ECC 5.0 to ECC 6.0.
One of my idea is to use LSMW and other is to use ALE.
I am expecting many changes in the current material master, so using standard ALE BD10 is difficult. Example: ECC5.0 material type "ABC" would be "XYZ". (XYZ and ABC are of same material type, example: FERT). I choose to have different material number in new system. Like that there are few more changes.
What are all the best methods to extract the data from ECC5.0? I was checking the program RMDATGEN to download the data, but it is not readable. I can prepare a file format and map the columns in ECC6.0 LSMW. Since both the systems are SAP, I am thinking why to prepare a seperate input file format? Again I need to download the data from ECC5.0 for that format. Is there a simple to download and upload the data? Please let me know.
Thanks
NagarajanHere you define your Partner profile:
IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Partner Profiles and Time of Processing > Maintain Partner Profile Manually
And in the details you define for yor message type MATMAS:
Receiver port: X
Output mode: Collect Idocs and Do not start subsystem
This collection writes the idocs to a file.
This file can then be found in SAP file system with transaction AL11.
a clever basis guy can then move it from there to your network. -
Idoc serialization and change pointers automatic trigger
Hello Experts
How to trigger an Idoc automatically once the application has been saved ?
Scenario 1: Here serialization of message types are used, all the idocs in the serialization group must trigger & sent to the receiving system as per the sequence even if any field in the complete serialization group of message type changes (Note No Manual processing using reports Like RBDSER01, RBDSER02 etc..or Batch Jobs)
Scenario 2: Again Idoc has to trigger and sent to the receiving system as per the change pointer configuration once the application has been saved (Note: No manual processing like BD10, BD11 etc.. and no user exits has to invoke while saving the application).
Please let me know is this two cases can be implemented. Thank you in Advance.
Regards
Imran.Hi Fernando,
I'm trying to accomplish the same thing that you were... trying to get a change pointer to be created based off the status change of a technical object (functional location or equipment).
Can you give me any detail on what you did?
Thanks,
John -
Export materials master data using LSMW?
Hello gurus,
is it possible to export material master data using LSMW? Or are there other ways to do this (apart from manually selecting the desired data from the DB tables?)
It would be great if anyone could point me to some documentation on this.
We would like to export the master data from one SAP system and import it in another one.
Thanks in advance
AliciaWhat I usually do is transferring the data via ALE (BD10) as IDOC to a file (instead of a different system). This file can even be located in an shared folder that can be accessed from both SAP systems
Then I use LSMW in target system, map IDOC to IDOC (almost done automatically) and import the data from this file, and beeing able to exchange field values if necessary. -
Hi friends
What is the difference between Tcodes BD10 & BD11 to BD14 &BD15
Regards
Simha
Edited by: simha.n on May 11, 2009 4:52 AMHi,
BD10 -- Send Material
BD11 -- Get Material
After setting up a distribution model and partner profiles in sending and receiving clients.
BD10 is used to send material from out bound (sending system ) to in bound (recieving system)
in out bound BD10 reads the application document and generates IDOC
BD11 is used to read the IDOC and creates application document in inbound system
both are different in functionality
Similar to the material master for vendor master we can use BD14 & BD15
BD14- Get Vendor
BD15 -- Open vendor
Thanks
prasad.s -
Outbound with and with out message control
hai All,
In Out bound process when to go with message control and when to go with direct(without message control)?
thanks in advance
PraveenHi,
There are two ways to trigger an outbound idoc, 1. thru message control
and 2. without a message control.
Message control comes into picture if the application document is controlled by a output type.
Suppose a purchase order is created, then to send the purchase order to vendor, with the help of output type, the idoc will be triggered. This output type along with message type will be configured in Partner profiles.
Without message control comes into picture if its a master data like Customer master r Material master. U can use BD10,BD11 etc.,
Regards
Kannaiah -
Hi friends need some help in ALE IDOC !
For training purpose I am trying to create an IDOC using ALE
where I am using the same client as server as well as receiver......So I am using as receiver "NONE" . this is already present in the SM59 under logical systems..
But i cant create a port for that...as its saying its not compatible with the TRFC "
Can any one tell me what is the way to create the port ?Hi,
You are new to ALE and IDOCs so I am giving all step by step to do the ALE.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Thanks
Sarada -
Hi,
Iam trying to send a MATMAS Idoc from one client to another client , which is in the same R/3. The outbound staus is 03 and the inbound is 51.
I just created a material (Material details are attached below for reference) and send tht material to the other client using BD10.
can you please tell me the Inbound function module name which i should use to post it again.
Material Name:KRMATERIAL
Industry sector : Mechanical Engineering
Material Type : Finished Products.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
Thanks
-KarthikHi Karthik,
Just follow the procedure, this is for MATMAS
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
<b>Reward Points if this helps,</b>
Satish -
what r the diffrent methods& steps to tranfer the data from outbound to inbound ,viceversa in ale/idoc ?
explain each and every method ? plzzzApplication Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
idoc:
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Reward points.. -
Need of ALE settings to connect 4.7 to 5.0 to send IDOc
Hi
I have two servers 4.7 and 5.0 .
Now I want to send Idoc from 4.7 client 800 to 5.0 client 800.
Can anybody provide me the steps to create ALE settings and to send IDOC.
creating logical systems in source and destination and creating RFC and partner profile and port.
Thanks in AdvanceHi,
For ALE senerion for sending the material from one system there are three methods are there
1) Executable program only for Master Data
2) Message type Master As well as Transcation Data
2) Change Pointers Master As well as Transcation Data
1) SCC4 Create the Logical systems.
ALG800 for 800
ALG810 for 810
2) Assign the Logical systems to the Client using SCC4> selecting the Client and Double click> maintain the logical system name which you had created in the step 1
3) Main RFC destination SM59---> use the same Logical system name as the Logical system name
log on to 800 and goto SM59 --> create
ALG810 --> provide the 810 logon details and save
test with remote logon...it will open the client 810..
logon to client 810 goto--> sm59 --> create
ALG800 --> provide the 800 logon details and save
test with remote logon...it will open the client 800..
logon to 800 goto BD64 maintain CDM-->change
create CDM
ZCDM01 CDM
ALG800 sender
ALG810 Reciever
MATMAS Message type
ZCDM01 CDM
ALG810 sender
ALG800 Reciever
MATMAS Message type
save
Environment ---> Generate partner porfile.
edit --> distribute CDM
Logon to 810
goto BD64---> select CDM ZCDM01 ---> Environment ---> Generate Pratner Profile.
Edit --> distribute.
ALE Setting are compleated.
Logon to sender system 800.
create material in MM01
Material 10001
Industry sector mechanical engee
Material Type finished
enter
Base Unit of Measure KG
Weight unit KG
Gross Weight 100
Net Weight 100
save
Execute BD10 in client 800
Check the Idoc in WE05.
Log on to Client 810
Execute BD11
check the IDOC status in WE05
goto MM03 provide the material numer enter...
Thansk,
Nelson -
Hi Friends,
Plz any one can give the brief step by step ALE , EDI, IDOC
I don't need the screen shots just sequence of transactions .
Please do this favor for me from long time am struggling with this.
thanks in Advance,
Sheethal.Jagadesh,
Go thru thesee.......
ALE---IDOC Creation Steps
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
check the following Links
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
ALE and IDOCs
iDocs
IDOCs !!!!!! need your help
idocs
ALE, EDI and IDOCS
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Regards. -
Hi friends ,
I want upgrade my skills in abap ,currently i am working on reports i want to develope an idoc program actually every one saying cofiguration settings and distribution model and so on..........but in general what is the actual work of an abaper in developing an idoc and please can any one give the solution how to learn
idoc developement process, if possible give me the reference code.
Thanks in advance,
sasi.Hi
see the doc
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Create Model View
Tcode BD82 - Generate partner Profiles & Create Ports
Tcode BD64 - Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE - for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 - Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 - Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 - Send Material Data
Tcode WE05 - Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Regards
Anji -
Please help me in understanding ALE
1. _Please can anybody send me the ALE Real time scenario, please dont say that it is to send the data from one client to another i.e master data ?
HI Friend,
I dont know what you are expecting but here i have a complete scenerio step by step to send material from one client to another .
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for
transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name
and case sensitive to create the ports automatically while generating the
partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change
Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save
and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the
description and save it
it will effects the target systems material desciption will also
changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your
getting 51 Error
Hope this Helps.
Thanks
Mahesh
Maybe you are looking for
-
ok this has to be simple but I'm getting stuck I'm trying to display a value when no data is found in a sql querry. similiar to an nvl but nvl doesn't work because no rows are found. I don't want to do any pl/sql or user defined functions. so for exa
-
We are using CUP (BO AC 5.3 SP14) with role provisioning via SAP CUA. Whenever there is a system upgrade etc on our CUA systems, we would prefer if any role requests could be "put on hold" in CUP, ie keep all workflow functionality but just not provi
-
I've graduated from uni and am looking to buy Dreamweaver. My student card is valid until July 2015, so am I still entitled to student discount?
-
My ipad is saying this apple id has not yet been used in the itunes store
my ipad is saying this apple id has not yet been used in the itunes store
-
Problem running through IDEs in Linux.
I have a really weird issue. I'm a beginner and i work with simple .java files. I'm using Linux at the moment and i can compile my source and run file using java 1.5 from the terminal. I have a couple IDEs installed as well that i would like to use.