ALE change pointer error - master data

Hi friends,
While loading master data (customer,material and order number) all delta,we faced the error "ALE change pointers are not set correctly".
In the discussions posted earlier,it was said that the change pointer in BD61 activation would solve the issue.
If i do that now,whether my other delta loads will be affected or it doesnt have any relation to my other transactional deltas.Pls clarify me.
Also explain me the reason fot this error.
Thanks & Regards
Ragu

thanks ajay for your input
regards
ragu

Similar Messages

Change pointer for Master data

Hello Experts :
If I Configure and Activate Change pointer ,so will it record only existing change or it will update new entry also
Example : Did changes in vendor master payment terms (I know change pointer will work for this).
But if I create any new vendor in system 1 will change pointer will record this change and going to update system 2 and will create this vendor in system 2 ?

the graphic in the docu cleary says create/change master data will create change pointers:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a61bd507d11d18ee90000e8366fc2/content.htm

ALE distribution of HR master data to CRM - subtype CELL and MAIL

Hello,
Overview/Introduction:
we are using the ALE distribution of HR master data to CRM. The distribution has already been set up and it is running. We know that the infotype communication (0105) is especially distributing the subtypes 0010 (e-Mail) and 0020 (telephone number). This e-Mail address and the telephone number are stored in the business partner in the CRM system.
For this infotype 0105 there are also the subtypes CELL (cell phone) and MAIL (e-Mail address). Unfortunately this cell phone number and the mail address (from subtype MAIL) are not stored at the business partner in CRM.
Our request is on the one hand to store the data from subtype CELL into the field mobile number of the business partner. And on the other hand we want to store the e-mail address of subtype MAIL at the business partner instead of subtype 0010.
For some reason it seems that these requests canu2019t be setup within SAP standard.
So we found SAP note 758426 which suggests to use the BAdI HRALEX_INBOUND and the report RH_ENHANCE_BP_TEMPLATE.
Problem:
Now the problem is that the BAdI does not get called! The BAdI is active! We tried to set break points -> unfortunately did not stop! And we also implemented an endless loop in the BAdI -> even with this the system did not u2018stopu2019!?
Any ideas?
Thank you,
Roman

Hi,
First you need to create a distribution model using transaction BD64 : Edit > Model View > create.
Then you will need to maintain fields for description and technical name. In partner box you need to enter the source system (HR) and the target system (FI) in the second field. Then you need to assign a message type and filter settings if you need it. You need to create this distribution model in source system (HR).
After, still in BD64, go to environment > change partner profile or transaction WE20
Select your target system and enter the corresponding message type ( HRMD_A or HRMD_ABA depends on your scenario) with the correct customizing (receiver port, packet size, idoc type, syntax check and output mode).
Then please do the same things in your source system using WE20 for your source system and define your inbound parameters (Process code HRMD, processing by function module : use trigger immediately if it is not a production system or else trigger by background program and this case you will need to run report RBDAPP01 to process Idocs).
Once done, then go back to your model view in your source system (BD64) and go to Environment > generate partner profiles. Then please go to Edit > Model View > distribute
After all these settings done, it should work.
Please also check out documentation :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/82/933b90aa9e11d6b28800508b5d5211/frameset.htm
Best Regards
Christine

Send changes of Artical master data from sap to nonsap (idoc outbound prog)

Hi Experts,
I am new to interfaces
I have one requirement in Idocs, i.e the changes of artical master data is send to sap to nonsap system through idoc.
idoc type is ARTMAS05, msg typ is ARTMAS.
I am giving some information for my object.
For article (MATNR) by site (WERKS plant)
     If MRP Type (MARC-DISMM) = u201CX0u201D
          Then if changes to fields:
          MARC-KZAUS     Discontinuation ind.
          MARC-AUSDT     Effective date out
          MARC-NFMAT     Follow-up article
Then send idoc type ARTMAS05 with the following data
segment E1BPE1MATHEAD
     MATERIAL
segment E1BPE1MARCRT
MATERIAL             PLANT                     DISCONTINU
EFF_O_DAY            FOLLOW_UP
Systems Referred to:
The planning system for our client is nonsap system. This software requires to be informed of relevant changes on articles in order to start its planning runs. When an article is superseded by another we have to send the replacement article (if any) as well as the discontinuation date.
Dependencies/Prerequisites :
     Change pointers for Article master active
     Change pointers active for fields:
     MARC-KZAUS      Discontinuation indicator
     MARC-AUSDT     Effective date out
     MARC-NFMAT     Follow-up article
Idoc ARTMAS05 required with reduction in order to only send relevant fields
Filter to only send idocs for materials in the u201CAutomotiveu201D type where MARC-DISMM = u201CX0u201D.
So this is my requirement, please send some sample code or idea how to complete object.
with regards,
gs reddy.

Hi,
All the details mentioned seems to be correct.
just change one "automotive" material and check change documents are getting generated.
i hope partner profiles are already in place.
once change docuements are inpalce check RBDMIDOC program is scheduled in back ground or you can manually execute the program for testing.
and check the IDoc generated.
do you want supress some segements?
di your NOn-sap ssytem can accept Idoc?
Suresh

Changes of asset master data - S_ALR_87012037

Hi Colleagues,
Could please help me by settings in order to see changes of asset master data ?
I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
is there any another option to get request display of data ?
Thanks a lot for your response

HI Gora,
Standard report is the best option, but you can also use Table CDPOS:
S_ALR_87012037 Output:
You can also use Table CDPOS/CDHDR, in se16n.
Regards
Javed

To track changes to the master data

Is there a report or program to run to see, who made changes to the master data, deleted a record or so?
Please help.

Hi ,
Use the report RPUAUD00(Logged changes in infotype data). This report is to display all documents that were created with the creation of infotype log (short: Change documents). any changes, creation/deletion.
to ensure that changes to infotype fields are entered (changes, creations, deletions), these fields must be maintained in the following views: HR Documents: Infotypes with Documents (V_T585A), HR Documents: Field Group Definition (V_T585B), and HR Documents: Field Group Characteristics (V_T585C).
Hope this hellp you.

Changes in customer master data

Hi
Is there a different way (apart from using IDOCS) to identify changes (create/update/delete) in customer's master data to the following Condition Class:
BPAR
TESTRF
DEBI
KLIM
Best Regards
Tal

Hi
I want to know if all the changes in customer master data objects: BPAR,TESTRF,DEBI,KLIM
are recorded in the system and where?
is it relevant to customization?
Best Regards
Tal

Mass change of Asset Master data

Hi!
Is there any transaction code for mass change of asset master data. I need to change Depreciaiton start date for all assets?
regs,
Ramesh

Use OA02 - Mass change, create a substitution. Add in all prerequisites and save it.
Go to AR01, execute it for the list of assets to be changed and create a worklist for the same.
Execute the worklist in AR31 and refresh it till all changes are completed.

Mass change of customer master data

Hi,
I would like to do a mass change of customer master data.
I need to remove the international VAT register number for local Polish customers, as we will use the local NIP number for these customers.
Which transaction code do I need to use?
Are there any things I should keep in mind?
Thank you.
Kind regards,
Linda

Hi,
You haev a Transaction called MASS. Please check whether you have the authorization for the same. If you have then it is very much easy for you to maintain the same. If you dont have the MASS authorization then you have to create a LSMW and then make the change.
Steps:
1. Enter MASS
2. Object type - Select KNA1 (avaialble in the drop down) and execute
3. You should have an option "Customer master (VAT registration numbers general section) " with table KNAS. Execute
You will be able to choose those customers whom you want and make the changes.
Hope this should help you.

Loading error "Master data/Text of Characteristic ZMAT already deleted"

Hi,
I have some problem about SAP BW loading.
while loading I'm getting this error "Master data/Text of Characteristic ZMAT already deleted"
and loading is failing.
So when I try to loading again sometime loading is completed but sometime is failed with this error.
I try to find out root cause and I check table RSMASD there is ZMAT entry this table.
How do I remove the entry?
How can I fixed this problem ??
Now my SAP BW is 3.0 B and support package 26
Hope this helps...
Sumaru

Hi,
Check table RSMASD or SM12 for an entry there.
RSMASD should be blank normally.
SAP Note Number: 936694, 946992 and 936694.
Try
Re: Error while running InfoPackage
Master data/text of characteristic 0MATERIAL already deleted
Master data/text of characteristic ZXVY already deleted
Re: Data Load Error due to Master data deletion
Hope this helps.
Thanks,
JituK

Online Change Transfer for Master Data

HI,
whats transaction for Online Change Transfer for Master Data, and how to use it.
regards
manish

Hi Manish ,
You make the settings for change transfers in transaction *CFC9 (Change Transfer
for Master Data setting)*
For material masters, customers and vendors, the change transfer can occur
periodically or can be executed online immediately. You also have the option of
deactivating the change transfer.
You can also configure an immediate change transfer for work centers and
resources. In this case, the change transfer only concerns the header data of the
individual work center capacities.
Hope it will help you.
regards
Ritesh

Attribute Change Run VS Master data activation

hello guys
I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
Thanks and Regards
S

Hi S,
Although they seem to be the same there are differences.
Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
The 2nd function, is that it realligns the aggregates for the changed attributes
let me give you an example.
You have an aggregate based on material group which is an aggregate of material.
Consider that you have a material X which initial belonged to group A.
The aggregate would look like this
Material Material Group Keyfigure
X A 100
Now you change the material group of the same material as B
The aggregate would not change automatically....ie it would still be X A 100
To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
X B 100
Hope this helps.
Regards.

Changes in the master data of assets

Hello Guys,
Is there some transaction or table in the assets accounting, where are recorded the historical changes in the master data?
Thanks a lot.
Best regards,
Rodrigo Soares

Hi Rodrigo,
To add on Bernard's post, after selecting the asset using tcode AS03 and choose Environment tabe in the top of the SAP screen - you will have two options to choose
a) on asset
b) on field
The first option will entire list of changes happened on the assets and in the second option you can get the list of changes for any particular field in the asset master data.
Best Regards

ALE Change pointer setup for master

Hello everyone,
When I am extracting data from R/3 some of the changes are not getting extracted. I want to check if all the proper Message types are turned on or not. What is the best way to do that?
I am extracting 0cust_sales.
thanks

It is activated there, I checked. Thats like a master switch which controls change pointers for all message types.
But dont I also have to turn on change pointer for each message type ?
I am refering to customizing in R/3
SAP Netweaver-> SAP Web Application Server -> IDoc Interface / Application Link Enabling (ALE)->Modelling and Implementing Business Processes->Master Data Distribution->Replication of Modified Data->Activate Change Pointers for Message Types
Thanks

IDOC to XI (Using Change Pointer) - Error

Hi all,
I have 1 scenario to update external GL master data using XI. in this case i already configure the source system (SAP) to sending the IDOC to XI whenever got changes.
BD61 ---> Activate Change Pointer Globally,
BD50 ---> Activate Change Pointer for GLMAST Message Type.
SM59 ---> RFC destination for XI system (PX6CLNT300).
BD54 ---> Logical System source (ST6CLNT100) and target xi (PX6CLNT300)
WE20 ---> Partner Profile for XI (PX6CLNT300).
BD64 ---> Create Distribution Model View. Sender = ST6CLNT100, Receiver = PX6CLNT300 and Message Type = GLMAST
The system can generate the IDOC whenever changes happen with running program RBDMIDOC. but the got error with no sender / receiver information in WE05.
Please advise any step that i have to do ?
Best Regards
Fernand

Hi Matias,
Thank you for your answer. The problem is because i had used wrong logical system in my distribusion model. The system using not common logical system. nomarly it will use "PX6CLNT100" but in my system the basis people using different logical system that's why the GLMAST IDOC cannot pass throught to XI system.
Best Regards
Fernand

ALE change pointer error - master data

Similar Messages

Maybe you are looking for