ALE clients in single R/3 system.

Hi Experts,
I am having a single R/3 system for which i have set different clients. But if i want to exchange data between these clients through ALE under single R/3 system ,then i am unable to create 2 clients with the same key i.e. '800'.
Is it possible to transfer data under a single R/3 system between 2 clients...
Thank You.
Regards.

800 is key to a particular client, so how can you assign the same number to two different client, your number 800 is to identfy a particular client in your system, so it always should be unique.
With luck,
Pritam.

Similar Messages

In ale client and logical system

Hi,
do we need to assing logical system to client in ale configuration.
thanks,
Jigar

Hi,
Yes, you need to define and assign logical system for ALE client.
Path: SALE -> Basic Settings -> Logical Systems -> Define Logical System
Path: SALE -> Basic Settings -> Logical Systems -> Assign Logical System to Client
Regards,
Ferry Lianto

Transport ALE Configuration from Development to Production System

Hello All,
We have created ALE-IDOC scenario in the development system and its working fine. Now we want to transport it to the Production / Quality system. How can we transport the settings like logical systems, port definition, partner profiles, distribution model , RFC destinations from one system to another system??
Because the client numbers are different for development , quality and production systems.. Do we need to transport the logical system and client assignment using STMS or create directly in the target system??
Thanx in advance...

The issue with transporting the ALE distribution model is that the source and target logical system names change between the dev, test and prod environments.
Assume an ECC6 and PI landscape with dev/test/prod called E6D/E6T/E6P and PID/PIT/PIP with all systems using client 100. By default (SAP recommendation) the logical system name for E6D client 100 is E6DCLNT100 and its PI partner in the dev landscape will be PID client 100 with logical system name PIDCLNT100. In test the logical system names will be E6TCLNT100 and PITCLNT100 and in prod E6PCLNT100/PIPCLNT100.
So, when a distribution model is set up in dev with a source system of E6DCLNT100 sending messages to a target system PIDCLNT100 everything works nicely. This assumes that the PIDCLNT100 logical system partner in WE20/WE21 is mapped to a port which maps to an RFC destination pointing to client 100 of PID.
When this model is transported to the test system it won't work because the logical system names are wrong.
It is possible to create a logical system name called PISERVER in SALE and then map that, via WE20/WE21 to point to the corresponding PI instance. Thus in E6D, WE21 would map logical system PISERVER to the RFC destination for PIDCLNT100 but in E6T the mapping would link to RFC destination PITCLNT100 and in E6P to PIPCLNT100. In this way any ABAP programming trying to use the ALE distribution model would send messages to PISERVER and would be transportable.
However, setting up the source system in the same way appears to be impossible. When attempting to generate partner profiles, transaction BD82 stubbornly insists that the source system for which it will build profiles MUST be the logical system name defined for the execution client in SCC4. Theoretically, mapping similar to that for PISERVER could be performed for ECC6SERVER and the ALE distribution model could be built to send messages from ECC6SERVER to PISERVER but BD82 won't honour this source system.
This appears to make it impossible to transport an ALE Distribution Model. Can anybody provide a process to overcome this apparent architectural limitation?

Error Message from SLD - "Selected client already has a business system..."

I have successfully created and test a File to IDOC scenario from a File system to ERP ECC 6.0 (client 101, system name sapdbt02)
Right now, I creating another File to IDOC scenario for a different file system to the same ERP ECC 6.0
At the SLD, I would need to create two new Techncial System and Two new Business System.
However when I creating a Business system for the ABAP Type for the ERP ECC 6.0, when selected the same client and system name of the first scenario that I have done, I got this error message
"Selected client already has a business system associated, please select a new client or system"
I am puzzled that I would need to a configure a new client for the same system ID for another FIle to IDOC scenario
going to the same ERP system
Please advise.
Best Regards
Freddy Ng

For example:-
create business system for R3 system in SLD as suggested by stefan. I assume that u have one R3 system which is either sending or receiving data from XI.
assign the system to ur scenarios, u can use common IDOC/RFC/XI channel for sending data to R3 system.
Separate R3 business system is required incase u have to send data to different R3 system.
If u have different files coming from different File system in that case better to create different business service and use them.
chirag

How to Changing Productive Client in an ABAP+Java System?

How to Changing Productive Client in an ABAP+Java System?

1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME

Client transport from one sap system to another one

When I want to make a client transport from one sap system to another (i.e. the source system is a system without a enhancement package and the destination system is with ehp5) can it be that there come critical conflicts in the modules (like FI, CO or HCM or other ones)?

Hi Damian,
It is not recommanded to import TRs from SAP system not at equal level.
Get both the systems at same level if possible.
But still if you have senario like this , pls ask to transport owner about changes included to undersatnd criticallity
Regards,

Client copy between different operating systems.

Hi Experts,
Our production system is running on HP-UX OS. We are installing a standby quality system and planning to do a client copy to this system from production by taking this into transport domain. But this new system is in windows. So, is it possible to perform a client copy where the source system is HP -UX and target system is windows??
Regards,
Amit.

Hi Amit,
Follow SAP Note 552711 for client copy. Refer to qns no 4 & 5, which is relevant for your question.
Can I create client copies in a heterogeneous system landscape?
Remote copies or client transports can also be carried out between different database and operating systems.
Regards,
Debasis.

Transporting ALE Distribution Model to a Target System

Hi,
      How do I transport an ALE Distribution Model from a Development System to another target system
      While transporting, how do I ensure that in the target system, the ALE Model points to the correct partner system?
      e.g. a Dev System1 points to a Dev System2. Hence a QA System1 must point to QA System2.
        When I created the ALE Model, the system prompts for a transport request, so there must be a way to transport the same
Regards,
Aditya

Hi Aditya,
In my experiences, we always maintain manually the distribution model and partner profile in our production system due to data integrity and security reasons.
However, we always maintain the distribution model and partner profile for QA system from development system via transaction BD64.
For logical system name, you need to tranport from DEV -> QA -> PROD system.
Hope this will help.
Regards,
Ferry Lianto

SCM question -2 SCM system connected to single R/3 system

Hi Gurus,
What is the implication using two SCM systems with single R/3 system when both SCM systems using for different modules (say one for DP and other one for GATP).
I know SAP recommends using multiple OLTP with single SCM. But this scenario opposit of that.
Thanks,
BKN
Edited by: BKN on May 6, 2008 7:08 PM

It is possible that there can be multiple SRM system connected to 1 R/3 system...You need to setup on...IMG>SRM->SRM Server->Technical Basic Settings>Define Backend System-> There you need to provide Logical System/Description/RFC Distination and Sys Type.
I hope it clarifies your issue.

Client creation in PI 700 system

Dear All,
We have the system PI 700 installed for development and all the post actions are done from the client 001.
Now I want to create a new client say 100 and want to use this client for all the configuration and development from now.
My question is , weather it is possible to use new client from now or we have to stick to 001 only.
And if we it is possible to work with new client from now please guide me what all the configuration settings I need to do in new client.
Regards,
Sekhar.

Hi,
If you want to change the default client & make another client as your development client means
Check this NOTE:::940309
If you want create New Client means
Creation of Users And Clients In SAP R/3
While Creating the Clients:-
1. Logon With Administrator User Accounts Like Client 001 User DDIC And Pwd .
2. Go to Transaction code SCC4.
3. Click on Change Button ( With Pencil Shape).
4. Click on New Entries.
5. Provide All Credentials And Click on SAVE Button.
( Keep Empty For the Logical System Name As per Now).
6. Go to Transaction code RZ10.
7. Select Instance Profile in the Profile Column(Press F4).
8. Click on Change Button.
9. There is one Parameter login/no_automatic_user_sapstar, Make sure that the value for that
parameter is set to FALSE )its in 0 or 1) make it to 0.
a) In Case if u r unable to find out the parameter, then click on Create.
b) Give login/no_automatic_user_sapstar in parameter name.
c) Give Value as 0.
d) Then click on Copy.
e) Go Back> Save>Save All the Windows what ever they popup.
That means the default user SAP* wil be activated once you create a new client. You need a
system restart after that.
While Copying the Client:-Note --552711
1. Logon with the Newly created client(Ex: 100 or 200) , User is SAP*, Pwd is PASS.
2. Go to the Transaction code SCCL.
3. Select the Suitable Profile as SAP_UCUS and the Target Client ( From which Client u want to
Copy).
4. Check the Check Box Test .
5. You can select Start Immediately OR Schedule Background Process.
While Creating the User:-
1. Logon with the newly created client, User is SAP*, Pwd is PASS.
2. Go to the Transaction Code SU01.
3. Give the Name of the User Which u want to Create.
4. Click on Create.
5. Provide All the Credentials.
6. Give Passward And Give Profiles in the Profiles TAB.
How To Set a Particular Client As Your Default Client While in the Logon Screen
1. Go for Transaction RZ10.
2. Select Profile As DEFAULT.PFL and Extended Maintainence Radio Button
3. Click on Change Button.
4. Change the value from 001 to 100.
Save and activate the profile and restart ur server.
Regards
Seshagiri

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

How should implement multi-thread in single-threaded Operating system using

How should implement multi-thread in single-threaded Operating system using java?
Java supports "Multi-threading".Is there is any way run the multiple threads (Implementing multi threading) using java in a Single-threaded Operating system (That is the operating system does not support for multi-threading).

Previous questions from OP suggest they are using J2ME, so the question might be possible.
806437 wrote:
How should implement multi-thread in single-threaded Operating system using java?
What is the actual question/problem?
A java app doesn't do threads or not do threads. It uses classes. The VM does threads.
So if you have a platform that does not have threads and you want to support the thread class then the VM, not a java app, must provide some pseudo mechanism, such as green threads, to support that.
If your question is about java code and not the VM then you must build a task engine and insure that the tasks are of short enough duration that it is an effective use for your system.

Difference between client Export/Import and a system refresh

Hi Experts,
I would like to know the diffrence between client Export/Import and System refresh.
Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
Thanks & Regards,
Injamuri

Hi,
What is system refresh when and why it is done?
The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
Mostly the refresh of clients will be happen at the time of development stage.
System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
The process to carry out the same is as follows:
1. Create a client on quality system using txn scc4
2. Create a RFC between Production system and Quality System (need to create on quality system)
3. Login to the newly created client using sap* and pass as a password
4. Txn sccl to start the client copy.
You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
Anil

How to i get client IP address of a system on Oracle E-biz

We are trying to extend our audit to getting the client IP address of a system on Oracle E-biz. This is to track down some users trying to perform a fraudulent act. Anybody has an idea. Maybe there are some scripts i need to run.

Hi user;
Please check:
How to get Client IP address in oracle apps. Are there any API's.
Re: How to get Client IP address in oracle apps. Are there any API's.
Hope it helps
Regard
Helios

Documentation if 32bit client and 64bit client can coexist on 64bit system

Dear all,
I have read that I am not the first guy how try to install a 32bit client and a 64bit client (multiple homes) on 64bit system, but I still couldn't find something about this issue in the official Oracle Documentation.
Can anybody please give me a hint or a link where I can find something written in the official Oracle Documentation if a 32bit client and a 64Bit client can coexist on 64Bit system ...
Thanks in advance!

Could not find anything in official documentation (may be my search is not comprehensive enough).
However, you can just get in touch with Oracle support (I don't know if you need to raise SR for this) and ask them if it will work. To my knowledge, it would work under 32 bit emulation mode but results cannot be guaranteed.

ALE clients in single R/3 system.

Similar Messages

Maybe you are looking for