ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI

Hi all,
I need ALE Configuration for PEXR2002(Basic Type) IDoc , it's message type PAYEXT.
I don't know ALE Configuration for sending data from SAP IDS to SAP XI.????
I need ALE Configuration doc/pdf??
Please give me some guidline for this..
Regards,
Umesh

Umesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave

Similar Messages

ALE configuration for Outbound Idoc - Help me

Hi Experts,
I am newbee in SAP and XI. I was trying to send MATMAS Idoc from R3 and i was running into some issues. So i would appreciate if someone can help me.
I am using following link as reference. /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I did all the steps mentioned in the above link ( Creating Logical Systems, Assigning Client and RFC destnations, Creating distribution models ..... etc)
and then everything went well and i saw success messags in all the steps.
I used BD10 to send material and it went well. But when i check TRFC queue, i see some error messages; "No service for system SAPRDI, client 800 in Integrion Directory"
And all the messages are hanging in the TRFC queue.
Note: I havent configured anything in XI yet. I wanted to make sure IDoc gets to XI client first.
Thank you in advance. Pls help me its very urgent.
Thanks,
Surya

I created RFC destination (SM59) and Port (IDX1)
Then i sent another material (BD10) and checked tRFC queue. i found bunch of error in the Queue.
1.connection to host 10.4.23.120, service sapgw00 timed out / CPI-C error C
No service for system SAPRDI, client 800 in Integration Directory
partner not reached (host 10.16.176.29, service sapgw00) / CPI-C error CM
connection to host 10.16.136.127, service sapgw58 timed out / CPI-C error
Note: i have noticed entries for R3 in SLD as below
System Name: RDI ( not SAPRDI as mentioned in the error message)
System Home: r3ides
That might be reason. If so, how to change it in R3 box? Any suggestions?
Please send me if you guys have any links or docs to address this issue.
Thanks,
Surya

How to drop an IDOC and stop message type to trigger ?

Hey Guys,
I am creating oubound IDOC for sales order confirmation. Based on storage location values I have to restrict line items which should go in IDOC. I am using program ZXVEDU02 to write the code and achieve this.
The problem is that based on the logic and conditions when there are no line items are to be sent in sales order to particular partner, I have to drop IDOC itself. How to do this? please help.
If in the above program, I write delete int_edidd, the sales order is not getting created with update termination message coming in user inbox.
I wanted to stop the trigerring of message type also.
any inputs on this will be appricated.
Thanks and Regards,
Vishwanath Purohit

hi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm

Implementing EXIT_SAPLIEDP_002 for PEXR2002 Idoc

Hi Experts,
I am implementing user exit EXIT_SAPLIEDP_002 for PEXR2002 Idoc and PAYEXT message type.
My requirement is to update E1IDKU2-BUSGEO filed based on comparison between E1IDB02 BB u2013 FIIBLAND and E1IDB02 BB u2013 FIIBLAND .
If E1IDB02 BB u2013 FIIBLAND) = E1IDB02 BA u2013 FIIBLAND, populate u2018DOu2019 in E1IDKU2-BUSGEO filed.
If E1IDB02 BB u2013 FIIBLAND <> E1IDB02 BA u2013 FIIBLAND), populate u2018INu2019 in E1IDKU2-BUSGEO filed.
Can please suggest me how to approach on this.
Thanks in advance.
Regards,
Ram

T-code CMOD
enter project = FFEDI001
click on enhancement Assignment radio button
Click on Display
Then click on the "components" button
Then click on EXIT_SAPLIEDP_002 button.
SAP will edit the function.
Include code on ZXF08U04.
Hope this helps,
Mirko.

Ale configurations for IDoc?

hi..
What are the ALE configurations need for an IDOC?
bye.

Hi,
Perform the following ALE configurations
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Also gothru this Blog <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> by Swaroopa Vishwanath
Regards
Santhosh
<a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
Use a Good Subject Line, One Question Per Posting - Award Points

ALE configuration for printer

Hi all,
Can u tell me how to configure printer setting using ALE.
Senario:
As we have 2 clients 200 and 500. 200 is open and 500 is closed.
If we configure printer from spad in 200 client the same should reflect on 500.

Umesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave

Client context error message while configuring for social login and personalization

Hi,
I am getting the below exception while configuring for social login and personalization.
27.12.2012 11:21:25.463 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper Problems while creating connection.
27.12.2012 11:21:46.549 *WARN* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.oauth2.Oauth2Helper token was null or not in UNAUTHORIZED state:1
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587485463] GET /etc/cloudservices/facebookconnect/sample_fb.login.html/callback/connect HTTP/1.1] com.adobe.granite.auth.oauth.impl.servlet.OAuthProfileImportServlet requestAccessToken: could not retrieve user
27.12.2012 11:21:46.549 *ERROR* [127.0.0.1 [1356587506549] GET /etc/cloudservices/facebookconnect/sample_fb.login.html HTTP/1.1] com.day.cq.wcm.core.impl.designer.DesignerImpl No design at /etc/design/cloudservices. Using default.
27.12.2012 11:21:48.455 *ERROR* [127.0.0.1 [1356587508455] GET /etc/clientcontext/default/contextstores/profiledata/loader.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Uncaught SlingException org.apache.sling.api.SlingException: An exception occurred processing JSP page /libs/cq/personalization/components/profileloader/command/load/load.json.jsp at line 41
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspExceptionInterna l(JspServletWrapper.java:574)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.handleJspException(JspSer vletWrapper.java:499)
at org.apache.sling.scripting.jsp.jasper.servlet.JspServletWrapper.service(JspServletWrapper .java:451)
at org.apache.sling.scripting.jsp.JspServletWrapperAdapter.service(JspServletWrapperAdapter. java:59)
Thanks,
Shankar .A

Hi Shankar,
Any luck with this issue. I am also seeing the same issue
Thanks
Pushparajan

Urgent - Idoc type and the Message type

Hello
Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
Thanks in advance

HI
Pratibha
How are you ?
Please check the below links:
http://scn.sap.com/thread/990524
http://www.erpgreat.com/pm003.htm
http://scn.sap.com/thread/1386811
http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
Mutti

TS4000 I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?

I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?
What do I do to get rid of this message as it is preventing me accessing the iPad or closing it down?
Thanks
AndyNess59

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again. Finally, open Settings > iCloud > Storage & Backup, and make a backup. The device will be backed up when it's plugged to the charger and connected to your network

I did upload CC PS on my wondow 7 pc , it only stays open for 30 sec and geta message and it shuts down

I did upload CC PS on my wondow 7 pc , it only stays open for 30 sec and geta message and it shuts down

What message do you get?

Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

How to enable IDOC serialization at message type level

Hi,
I am trying to enable IDOC serialization at message type and i am unable to achieve the desired results.
SETTINGS DONE:
I have done the settings required under SALE trsanaction
ALE IMG (transaction SALE)
   Model and Implement Business Processes
      Configure Master Data Distribution
          Set-Up Data for Sending and Receiving Serialization
              Serialization by Message Type
I have done the settings in both the receiving system and the sending system.
PROBLEM:
I am trying to send the Material classification first and then followed by Material class and then try to send the material itself to the other system. Since the serialization is enabled in the system, i was expecting that there should not be any errors.
But since the material classification IDOC is posted first it throws an error saying the Material Class does not exists. Since the serialization is enabled in the system i was expecting that the system would ensure that it post the Matrial class first and then post the material classification. I mean it would post in the order in which i have defined in the serialization.
Settings at Partner Profile.
    - I have set the trigger in background for all the message types except the SERDAT message type which is set trigger immediately.
Any idea what i am missing? Any suggestions on what needs to be done to ensure that the idoc is posted in serialization?
Edited by: Workflow learner on Jun 4, 2008 1:21 PM

Hi,
Create a custom transaction for PO Print & make the necessary changes as per your requirement In the custom program which you attach to the custom transaction you can put a validation to display the price based on user ID or some other parameters.
Thanks & Regards,

What's the difference between segment filtering and reduced message type

Hi gurus,
What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
Thanks in advance.

Hi,
BD53 is for IDoc Reduction.
this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
there mandatory fields will be in Green color..
And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
the table related to this transation is TBD20
please go through below blog you have an idea abt that,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
http://saptotal.com/IDoc%20Segment%20Filtering.html
regards,
ganesh.

Can I get Vendor Account Group & Cost center from PAYEXT Message Type?

Hi Everybody,
I am getting all the IDOC's of message type "PAYEXT" fro EDIDC & EDID4 tables. But will these IDOC's will contain Vendor Account Group & Cost Center ? If so could you please let me know the Segment & corresponding fields.
Thanks & Regards,
Nagaraju Maddi

Hi
You can find the all related IDOC fields in the SDATA field of EDID4 table
Yhis is a 1000 CHAR field which stores all the Segments data by concatenating into a string
have to search for the required field by looking into the related segment..
Reward points for useful Answers
Regards
Anji

Alert and Fault Message type Usage

Hi All,
I struck to the use of Alert and Fault message type.
(a) Can we use Alert in scenarios without BPM ? If yes where can we use?
(b) Can we use Fault Message Type in scenarios except Proxy ? If yes, how?
Kindly suggest me .
Thanks
Anup

Hi Rabi,
In order to use Alert for your File to File scenario, you need to setup Alert Configuration.
To configure alerts, you need to create the following:
1. Alert Categories in tcode ALRTCATDEF
- Here you need to define the alert message that will be sent once error occured and alert has been triggered. You would need to define here the recipients who will receive email notifications about the error message.
2. Alert Rules in Runtime Workbench
- Here you need to define which alert category you would use based on the rules you set. You can define if the error is in the Integration Engine or in Adapter Engine (for errors in File Communication channels). Also, you need to define condition for the alert by selecting the sender and receiver systems, interfaces that would be involved for the alert.
For further details, you may look the SAP documentation:
http://help.sap.com/saphelp_nwpi711/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Regards,
Jenny

ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI

Similar Messages

Maybe you are looking for