ALE Customizing Problem
Hi all,
I am customizing ALE Between two servers : sand ( client 900 ) and vat ( Client 600 ).
I want to transfer material from sand to vat.
I have made ports and RFC Destination as required on both the servers.
Ports and RFC Configuration on Sand is as follows :
RFC Destination name : VAT600
PORT Name : VAT600
Ports and RFC Configuration on VAT is as follows :
RFC Destination name : SANCLNT900
PORT Name : SANCLNT900
SANCLNT900 is the logical name of the client 900 of sand server.
VAT600 is the logical name of the client 600 of VAT server
Customer distribution model is also made on the sand server.
Partner profile on sand server is as follows :
Name : VAT600 ( logical name of the vat server ).
O/B Parameter : matmas
Partner profile on vat server is not made . I think it has to be made after distributing the model to the vat server.
Now when i try to distribute the Customer distribution model from Sand to vat server , the system gives following error :
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS VAT600 SYNCH does not exist.
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Please tell me where I am wrong.
I dont know how to overcome this problem.
Please help me.
Thanks and regards
Gurpreet Singh
hi,
i thing you need to set the partner profile in the VAT ( client 600 ) also before you distribute the Customer distribution model in clien 900
cheers,
sasi
Similar Messages
-
ALE Customer master SD: Transaction NACE application DB
Hi,
What I want to do: Sending a IDOC with a ALE transactional, and this for all creation or modification of customer in SD (transaction VD01, VD02).
I have already create a full ALE for ORDERS (V1).
My problem is in transaction NACE (condition for output control), in the displayed list in field APPLICATION I don't see DB. If I put the cursor on application field and with F4 I obtain a list from table T681A and in this list I can see DB.
I am vorking in vesrion 5.0.
So my question is: Can I for customer use Transactional ALE with DB application?
If yes what I have to do to set "DB" in NACE's list?
IF no, I will use change pointer ! Or other new method if exist and you tell me.
Best regards
HenriHi
Try transaction V/46. here you can determine the cust output procedure and assign the required condition types.
Further, assign the procedure to the required account groups in transaction OVT0.
Reward points if this helps you
rgds -
Consignment fill-up - Output Printing Problem - Z customizing problem
Dear Gurus,
I have customized and copied the following 2 sales documents types:
- OR
- KB
into ZSTA and ZKB
When I create a Sales Order using VA01 and ZSTA, and chose 1 material + 1 service, the printed invoice clearly shows 2 items for each one of them.
When I create a Sales Order using VA01 and ZKB, and again chose 1 material + 1 service, only the material appears on the invoice and not the service...
Does anyone has an idea about where the problem might come from?
Your help is greatly appreciated.
Thank you
Chris.Hello Lakshmipathi,
I give you more information if it might help you:
These are the item categories that have been created into the system for ZKB: (Consignment Fill-up)
ZKB TEXT TATX
ZKB LEIS ZTAW TAD
ZKB NORM ZKB1
These are the item categories that have been created into the system for ZSTA: (Standard order)
ZSTA TEXT TATX
ZSTA TEXT TAC TATX
ZSTA TEXT TAM TATX
ZSTA TEXT TAN TATX
ZSTA TEXT TANN TATX
ZSTA TEXT TAP TATX
ZSTA TEXT TAQ TATX
ZSTA 2 TAC TAM
ZSTA 2 TAC TAE
ZSTA 2 TAE TAE
ZSTA 2 TAM TAC
ZSTA 4 TAM TAC
ZSTA 4 TAC TAE
ZSTA 4 TAM TAM
ZSTA 5 TAO
ZSTA ALEN ALEN TAN
ZSTA ALES ALES TAN
ZSTA BANC TAB
ZSTA BANS TAS TAN TANN TAW
ZSTA DIEN TAX TAW
ZSTA DIEN TAN TAX
ZSTA ERLA TAQ
ZSTA ERLA TAP TAE
ZSTA ERLA TAQ TAE
ZSTA LEER TAU
ZSTA LEER TAQ TAZ
ZSTA LEIC TADC TAW
ZSTA LEIC TAN TADC TAW
ZSTA LEIH TAL TAN
ZSTA LEIH TAN TAL TAN
ZSTA LEIH TAX TAL TAN
ZSTA LEIS TAW TAD
ZSTA LEIS TAN TAW TAD
ZSTA LUMF TAP TAQ
ZSTA LUMF TAP TAN
ZSTA NLAG TAX TAW TAD
ZSTA NLAG TAN TAX TAW TAD
ZSTA NORM TAN TAP TAQ TANN
ZSTA NORM TAC TAE
ZSTA NORM TAE TAE
ZSTA NORM TAG TAN
ZSTA NORM TAM TAN
ZSTA NORM TAN TANN
ZSTA NORM TANN TANN KBN
ZSTA NORM TAP TAN
ZSTA NORM TAQ TAE
ZSTA NORM APO0 TAPA TAN
ZSTA NORM APO0 TAPN TANN
ZSTA NORM APO1 TAPA TAPN
ZSTA NORM APO1 TAN TAPA
ZSTA NORM APO1 TANN TAPN
ZSTA NORM APO2 TAPA TAN
ZSTA NORM APO2 TAPN TANN
ZSTA NORM APO3 TAPA ALES
ZSTA NORM CSEL TAN TAN
ZSTA NORM FREE TAN TANN
ZSTA NORM PSA1 TAPA
ZSTA NORM PSA2 TAPA TAN
ZSTA NORM PSEL TAX TAPS
ZSTA NORM PSHP TAX
ZSTA NORM SLSV TALS
ZSTA NORM SLSV TALS TAUL
ZSTA SAMM TAG TAN
ZSTA SAMM TAG TAN TAS TAB
ZSTA VOLL TAQ
ZSTA WERT TAW
ZSTA WERT TAN TAW
Please let me know what your thoughts are. Remember that the problem is that on the final invoice, we can only see the price for 1 or more selected materials in ZKB and no services at all.
Thank you
Chris. -
ALE custom function module for IDOC_INPUT_COSTCENTER
We are setting up an ALE to update cost centers in our HCM system from our ECC system. In conjunction with the cost center update I need to convert the company code (it's not straight-forward enough to use a conversion rule) so I have created a custom copy of IDOC_INPUT_COSTCENTER and included my conversion logic there.
I have done all of the necessary configuration steps associated with the custom function module; created message type ZCOSMAS, process code ZCOSM, etc. When I execute BD16 it is passing the correct message type and process code to the HCM system but I am getting a status 51 'Function module not allowed: IDOC_INPUT_COSTCENTER'.
I must be missing some piece of configuration in my HCM system that should trigger Z_IDOC_INPUT_COSTCENTER rather than IDOC_INPUT_COSTCENTER. Can anyone tell me what I have missed?
Thanks in advance for any assistance you can provide.
Regards,
Pat
Edited by: Patricia Holland on Dec 22, 2011 2:38 PMI thought that I had found found my problem in the model view but I was mistaken. I am still getting status 51 'Function module not allowed: IDOC_INPUT_COSTCENTER'.
It should be using Z_IDOC_INPUT_COSTCENTER.
Edited by: Patricia Holland on Dec 22, 2011 3:00 PM -
Creating an ISP Bill for Customer Problem, What did i do wrong?
Ok so the point of this program is to create a bill for customers selecting different packages for this ISP. Now i have done all the code, made the methods and what now, but there is a problem, in my main method which tests the methods in my class, the object does not get passed through the method and my toString method does not return the output. i will post the code below, did i do anything wrong?
this is the code for the class:
public class Customer extends appProg
//these are the base set of hours for each package
public final double BASE_HOURS_A= 10.00;
public final double BASE_HOURS_B= 20.00;
public final double BASE_HOURS_C= 9999999999999999999999999999999999999999.00;
//these are the base costs for each package
public final double BASE_COST_A= 9.95;
public final double BASE_COST_B= 14.95;
public final double BASE_COST_C= 19.95;
//these are the additional costs per hour for the packages
public final double PER_HOUR_COST_A= 2.00;
public final double PER_HOUR_COST_B= 1.00;
public final double PER_HOUR_COST_C= 0.00;
private double totalCharges;
private char packageType;
private double hoursUsed;
private String customerName;
// Below are the Constructors for this class
// The constructors will help instantiate the object
public Customer()
{ totalCharges=0;
packageType='b';
hoursUsed=0.0;
customerName="";
public Customer(char packageType, double hoursUsed, String customerName)
this.packageType=packageType;
this.hoursUsed=hoursUsed;
this.customerName=customerName;
// The following are the accessor methods
// the getPackage method returns the package type
public char getPackage()
return packageType;
// the getHoursUsed() returns the hours used of the customer
public double getHoursUsed()
return hoursUsed;
// the getCustomerName() returns the name of the customer
public String getCustomerName()
return customerName;
//the totalCharges methods calculates the total charges
public double totalCharges()
if(packageType=='A' && hoursUsed>10.00)
totalCharges=((hoursUsed-10)*PER_HOUR_COST_A)+(hoursUsed*BASE_COST_A);
if(packageType=='A' && hoursUsed<=10.00)
totalCharges=(hoursUsed*BASE_COST_A);
if(packageType=='B' && hoursUsed>20.00)
totalCharges=((hoursUsed-20)*PER_HOUR_COST_B)+(hoursUsed*BASE_COST_B);
if(packageType=='B' && hoursUsed<=20.00)
totalCharges=(hoursUsed*BASE_COST_B);
if(packageType=='C')
totalCharges=(BASE_COST_A);
return totalCharges;
//The following are the mutator methods
//the setPackage method will set the package type for the customer
public void setPackage(char packageType)
this.packageType=packageType;
//the setHours method will set the amount of hours used for that customer
public void setHours(double hoursUsed)
this.hoursUsed=hoursUsed;
//the setCustomerName method will set the name for the customer
public void setCustomerName(String customerName)
this.customerName=customerName;
//the following are input and output methods
public String toString()
return "You have used a total of "+hoursUsed+" hours and your total cost is "+totalCharges+"";
} // end class Customerand this is the code for the appProgram that goes with it:
public class appProg
//************* MAIN METHOD ******************************************
public static void main(String[] args)
String packageT;
char packagetype;
double hoursUsed;
String name;
Scanner keyboard = new Scanner(System.in);
System.out.println("This program was written by Ashkan Gholami for CSC15 with JONES.");
System.out.println("");
System.out.print("Please enter the Customers name: ");
name=keyboard.nextLine();
System.out.print("Please enter the package type: ");
packageT=keyboard.nextLine();
packagetype=packageT.charAt(0);
System.out.print("Please enter the hours used: ");
hoursUsed=keyboard.nextDouble();
keyboard.nextLine();
switch(packagetype)
case 'A':
System.out.println(""+name+" has chosen package A.");
break;
case 'B':
System.out.println(""+name+" has chosen package B.");
break;
case 'C':
System.out.println(""+name+" has chosen package C.");
break;
case 'a':
System.out.println(""+name+" has chosen package A.");
break;
case 'b':
System.out.println(""+name+" has chosen package B.");
break;
case 'c':
System.out.println(""+name+" has chosen package C.");
break;
default:
System.out.println("That is an invalid package type!");
break;
Customer customer1= new Customer(packagetype,hoursUsed,name);
customer1.totalCharges();
customer1.toString();
}in my main method which tests the methods in my class,
the object does not get passed through the method That statement makes no sense. You can pass objects to methods. However, you do not pass objects "through methods". In any case, neither your totalCharges() method nor your toString() method is defined to accept any parameters--much less an object as a parameter.
and my toString method does not return the outputHow do you know that? Your toString() method is defined to return a String. Where in your program do you attempt to display the String that is returned?
did i do anything wrong?If you call a method on an object, and the method returns something, you need to assign the returned value to a variable--otherwise the returned value will disappear into the ether. Subsequently, if you want to display the returned value, you have to take steps to do that as well.
It sounds like you need to revisit a simple "Hello World" program and play around with it a little bit. -
ALE IDOC Problem...
HI..
I am facing a problem on the inbound side.
If I check the IDoc in WE02, I am getting a status error as
"No status record was passed to ALE by the a"
Customised IDoc is used.
Please advise if you can ThnxHI,
IAM GIVING A DOCUMENT WHICH HELPS YOU TO UNDERSTAND EASILY AND YOURSELF CAN WORKOUT WITH THIS REAL TIME SCENARIO WHICH TRANSFERS THE DATA BETWEEN TWO SYSTEMS.
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07. -
Hi All,
I need to transfer cost centers via ALE. The issue is that the filter which I have to implement in the distribution model is based on company code (unlike controlling area which is the standard filter group for message type cosmas).
I searched a number of sites, but couldnt find much information on how to create custom filter groups in ale.
any suggestions?Hii Mridula..
In Your Scenario you have to Create a Filter Object type.
Find the Detailed Steps below.. You can implement The Same Example for Company code field...
<b>These are the Steps to Implement Data Filtering in ALE.</b>
<b>Filter Objects: These are the Fields based on which you define The Conditon.</b>
For eg: Matnr, Mtart...
1. Create a Filter Object (If it is not available for ur Requirement)
Tcode: BD59
New Entries:
ALE Filter Object type : MBRSH (Industry Sector)
Segment type : E1MARAM
Segment field : MBRSH
Save.
2. Link the ALE Filter Object type to the Table field in DDIC
Tcode: BD95
New Enries:
ALE Filter Object type : MBRSH (Industry Sector)
Table Name : MARA
Table field : MBRSH
Save
3. Creating Data filtering using this Filter Object type
Tcode: BD64.
Expand ur Model view.
Under the Message Type MATMAS
Double click on No Data filter / Data filter Active.
Create a Filter Group.
It will list out all the Filter Objects of the Message type:
(you should find the New filter Object type)
Double Click on the Filter Object type MBRSH .
Assign the Filter values
Save.
<b>REWARD POINTS IF HELPFUL</b> -
GRC 10.0 Workflow customizing problem
Hi experts,
We are working with GRC Access Control 10.0 and when doing the customizing tasks related with workflows we have an issue that doesnt let us continue.
Here is the background information.
We are in the "IMG/Governance Risk and Compliance/General Settings/Workflow/Perform Automatic Workflow Customizing" or easiest, we are in transaction code SWU3.
Here we have: Maintain Runtime Environment, all green, Maintain Definition Environment, all green, Maintain Additional Settings and Services, a red cross :(.
So, when opening the tree of our red cross task, we find that the only task that is with a red cross is "Maintain Web Server".
So, we execute the task, and here we have the following information:
Service = Webflow (Internet)
Address web server = http://<our web server>:8000/
Protocol Address = HTTP
Path of service = sap/bc/workflow_xml/?
URL = http://<our web server>:8000/sap/bc/workflow_xml/?
And here is something that kept our attention. When we push the button to test the URL, our IE opens a page but it is in blank (it doesnt show anything).
As we saw that, we thought that the service was not active and so went to transaction SICF and checked it, and yes, when you test the service, it doesnt work.
We finally, checked support packages upgrades and went to SP5 in our GRC server and SP5 in both plugins in our SAP ERP server.
And, here we are. Have no idea what else to do or check.
Any suggestion?
Thanks very much in advance.Hi,
I have just checked my SICF settings and found that we have not actually activated those services at all and our NWBC sessions work fine now.
Have you activated the sap/bc/nwbc and sap/bc/webdynpro services?
Also, have you activated the required BC sets for the standard content on Access Controls? This removes the need to do a lot of the basic setups but you still need to follow through the event linkages to check the successful generation etc.
Simon
Edited by: Simon Persin on Sep 21, 2011 5:51 PM -
Dear All,
I have created import PO of 100 Nos. Vendor has send 100 Nos.
To receive it I need to pay to cusotms, hence I have done MIRO for Customs commisionarate for 100 Nos where it is debiting for 100 Nos.
At the time of GR, I found only 80 Nos balance are in transit loss. Hence I am doing MIGO for 80 Nos.
At this time Customs clearing account is Crediting for 80 Nos only.
Due to this Customs clearing account is kept Crediting balance for balance 20 Nos hence it is not knocking off. As I paid to customs I can't able to claim back.
How to solve this?
Rgds
Sriniresolved hence closed
-
ALE Configuration problem in FI
Hi all,
I need some help on a solution to set up for FI doc ALE distribution using standard tools.
The goal is to send Invoice Documents (FB60) from an R/3 to another external R/3 system via IDoc, using standard messages, functions, etc.
I am looking for some guidelines and technical explanation on how I should proceed.
I saw that message type FIDCMT should be used. Do I need to enhance User Exit EXIT_SAPLF050_007?
I found some explanations in OSS Note 114814 and on other forum threads but I am kind of confused on what I need to do exactly. Some setups in BD64 were described in other threads, is that relevant?
Thank you in advance for your answers.
Regards,
Sylvainfirst of all u have to find out the user exit.and then if u need to add fields ,then u can write the code here. and then determine the outbound partner profle using tcode WE20. AND then u can u can assign those things in bd64 bussiness model.and if need filters u can set there.
Regards,
Jampani. -
Edit Customer Problem and Logical Port
Hi Experts,
ISSUE 1
In Web Service Administration, when I look at /iwcnt/actionitemvi_document service in details, I can see one Endpoint only, that is Binding_T_HTTP_A_HTTP.
In the Troubleshooting Guide, in section 5. No Workflow / Reports reach the SCL from backend system, there are mentioned two endpoints: Binding_T_HTTPS_A_HTTP and Binding_T_HTTP_A_HTTP - all other setting, I have, are the same on my server as mentioned in the troubleshooting guide. So why there is diffrence in binding on that particular service?
The other thing I noticed, is, that when looking closer on the logical port creation on backend system in the Behind the scene video, it mentions, that the Path Suffix include binding_t_http_a_http whereas in the Troubleshooting Guide it is showing binding_t_https_a_http - why this?
What is the right path suffix for the logical ports at the backend system?
ISSUE 2
When we edit a customer from SharePoint, we get the following error:
Error
An unexpedted error has occured
Correlation ID: ea04d908.xxxxxxxxxxxxxx
Looking closer at the correlation at SCL, everything seems to be green and no error is reported, but in the ULS Viewer, following info are displayed:
Microsoft.BusinessData.Runtime.BackendNullReturnException: LobSystem (External System) returned a null structure which is incompatible with the associated metadata.
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.WrapAsEntities(IMethodInstance methodInstance, IEntity thisEntity, IParameter parameter, ITypeDescriptor entityInstanceRootTypeDescriptor, Object correspondingAdapterObject, IEntity targetEntity, ISystemUtility dataSystemUtility, ILobSystemInstance lobSystemInstance)
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInstance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[]& overrideArgs, IFilterCollection filters)
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.FindSpecific(IEntity thisEntity, Identity entityInstanceIdentity, String specificFinderName, ILobSystemInstance lobSystemInstance)
regards
TariqHi,
ISSUE 1:
This is very likely because SSL is not configured. First of all can you go to SOAMANAGER -> Business Scenario Configuration and deactivate and activate the DUET_ENTERPRISE_ALL. When activating check if you are getting errors for the Assertion profiles (my guess would be, that you are getting errors).
In this case check the SSL configuration from SMICM -> \[Menu] Goto -> Services
Here you should see an active service HTTPS. If that is not the case, check that the SSL certificate is created (STRUST) and make sure that the required profile parameters are set (see also Deployment Guide -> "To configure the use of SSL in the SCL host" on page 33 at http://www.service.sap.com/instguides -> Duet -> Duet Enterprise 1.0 -> Duet Enterprise SAP Deployment Guide)).
Regarding the backend configuration for the logical ports in LPCONFIG. Here it depends on how you have setup the configuration on the SCL. If you released the services with HTTPS then the URL in the backend has to be HTTPS binding, if you configured it via HTTP, then it has to be HTTP binding Did you perform the connection tests as described in the videos or in the checkpoint of the troubleshooting guide?
ISSUE 2:
Can you take a look also on the SAP side in SRTUTIL? Do you see any additional error information there? You might also want to check the errors from the log viewer /IWFND/VIEW_LOG
Regards,
Holger. -
WHO WILL LISTEMN TO CUSTOMER PROBLEM
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
Redemption Code - 2239692
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
Redemption Code - 2239692
We acknowledge receipt of your online Registration and claim documents against notebook Serial Number CNU0282YQW under the HP Diwali Celebrations offer for the gift of an Titan Gift Voucher.
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
Redemption Code - 2239692
We acknowledge receipt of your online Registration and claim documents against notebook Serial Number CNU0282YQW under the HP Diwali Celebrations offer for the gift of an Titan Gift Voucher.
We however regret to inform you that we are unable to process your claim due to the below mentioned reason:
DEAR SIR I AHVE PURCHSED A COMPAQ LAPTOP FROM HP ON OCT 30TH 2010 AT THAT TIME THEER WAS GIFT COUPON SCHEME OF RS 200-/-THE CONDITION WAS THAT THE CUSTOMER HAS TO SEND THE BILL NUMBER AND SERIAL NUMBER
I HAVE SEND THE SAME ON NOV 10TH 2010
I AHVE AGAIN SEND THE SAME ON NOV 14TH 2010 THAN ON NOV 25TH 2010 I HAVE RECIEVED AN EMAIL THAT
Dear Sir/Madam,
Redemption Code - 2239692
We acknowledge receipt of your online Registration and claim documents against notebook Serial Number CNU0282YQW under the HP Diwali Celebrations offer for the gift of an Titan Gift Voucher.
We however regret to inform you that we are unable to process your claim due to the below mentioned reason:
Gift offer not applicable on the purchased Product
THAN I HAVE REPLIED BACK THAT GIFT COUPON IS AVAILBLE ON THE PRODUCT I HAVE PURCHASED & I HAVE VALID PROOFS THAN ON DECMEBR 6TH 2010 AT 6 PM(ITS GREAT TIME TO REPLY AFTER 10 DAYS)
THEY REPLIED WITH THE EMAIL
Dear Customer,
This is with reference to your participation under Compaq Presario/HP pavilion Diwali Celebration offer, in case you are submitting the claim documents for the first time, please be informed that we shall not be able to accept your claim documents for validation and processing of the redemption item since the last date of the submission of claim documents was 25-Nov-10. Any further query pertaining to this matter shall not be entertained at our end and your claim will be treated as rejected.
Thanks & regards,
HP Redemption Cell
I REQUEST HP CUSTOMER SUPPORT TO GO THROUGH THE WHOLE MATTER I CAN PROVIDE YOU AL THE EMAILS WHICH I SEND AND I RECEIVED
THIS IS GRAET JOK INFACT THAT YOU ARE GIVING LUCRATIVE OFFERS TO CUSTOMERS MAKING THEM FOOL AND IN THE END YOU ARE WRITING THAT YOU WILL NOT ENTERATIN
ITS HEIGHT!!!!!
KINDLY REPLY AND TELL ME TO WHOM I APPROACH OTHERISE I HAVE TO SEEK THE COURTYou need to contact the store or company that offered the rebate.
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation -
IDoc ALE converting problem with BD79
Hi,
i need some help with the ALE IDoc converting BD79
i need the following mapped.
IDoc = ORDERS
Condition:
IF Sender E1EDKA1/PARVW = YP then Receiverfield ABLAD = NAME1 from Senderfield E1EDKA1/PARVW = YP where ABLAD in PARVW=WE.
ideas ?
GordonHi Gordon,
Check the following blog:
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Hope this helps.
Regards,
Gajendra. -
Hello,
I am sending material in bulk quantity more than 1000. There I am getting message in WE02 it is displaying status in ORANGE color with following message.
Kindly suggest how to solve this problem.
<b>
IDoc: 0000000000000025 Status: IDoc ready to be transferred to application
No resources, immed. processing not possible: Quota for rdisp/rfc_max_own_used_wp exceeded
</b>Hi Dilip,
Sometimes the IDOC gives the status 25 with msg <b>IDoc ready to be transferred to application</b>.
In this case run the program RSEOUT00 and give this IDOC number as input and run to get the status 03.
Pls. reward if it helps u.
Thanks
Eswar -
Hi folks!
Hi,
this is upgrade from 4.6 B to ECC5.0.
Problem:
There is a flat file in unix directory. that has to be uploaded to the inbound system(my system).But the error is occured due to the port configuration.
Actually the port details are given in unix directory flat file. so, we didn't create ports manually in our system.
But the error occurs due to port configuration only.
why the error has happened like this.
can you send me the solution to resolve this problem.
I mean the steps to resolve.
Note: file is in same system.
i am really appreciate you for resolving the problem ASAP.
satisfied answers will be highly rewarded
Thanks & Regards,
srisaiHi,
You need the receiver port configuration at your end too.
Rgds,
HR
Maybe you are looking for
-
How can I move Logic settings from one machine to another?
I have a plugin that works find on my desktop but not on my laptop. On the laptop, Musical typing" doesn't produce sound on a track that uses that plug, and I don't get sound when I connect the laptop to my MIDI keyboard. Works fine on desktop. I wan
-
Hi, I just bought an E63 just to realize that I cannot use it with my work WiFi. My workplace WiFi is WPA Enterprise. Is there an upgrade to the software to support WPA Enterprise Solved! Go to Solution.
-
How to create an ImageIcon from other ImageIcon's part?
I have an ImageIcon instance and want to create an other one from the specified part of the initial icon. How can this be done?? Thanks. Boris.
-
Album artwork lost on iTunes 11.1.3
I have noticed recently that since installing the latest version of iTunes that some album artwork has disappeared on my Macbook Pro but is still visible on other devices. I am currently running OS X Mavericks. Any ideas?
-
Does the Webkit engine make use of the browser cache when downloading images?
I am creating an application that downloads a lot of images. Its an HTML Javascript based AIR application. I can't seem to find any documentation that relates to how cacheing is handled. Is there a cache for the webkit browser?