ALE distribution of planned material changes made using MM12

Greetings,
I have searched and come up empty-handed looking for an answer, perhaps someone in this forum can point me in the right direction.  I am trying to find out if there is a tcode and idoc message type that will distribute a planned material change, prior to it's activation, while it is still in it's planned state.  While in the source system, I can see these changes in mm14, I do not see the "future" values as part of the MATMAS generated by a BD10, nor as part of the ECMMAS generated by a CC92 transaction.  Ideally we could allow material master changes in our source system on a future date using the same ECM number as a BOM change for example, and distribute these changes together to the target system, prior to the ECM effectivity, without further requiring a additional BD10 to be performed after the material change activation date.  Does anyone have advice on this?  Thank you for any info you can provide.

1. Activate change pointers
2. Customize it to check for status before activation and trigger the distribution. (I think it should generate even if the material is not activated so no customization required - but just test and confirm. It's been a while I've looked at this).
3. Maintain this in your distribution model and distribute master data accordingly.

Similar Messages

  • How to find out if SQL execution plan is changed proactively using job/grid

    Hello,
    Can you help me on How to find out if SQL execution plan is changed proactively using job/grid control?
    Thank you..
    -

    The answers so far are supposed to show ways how to see that a plan changed after the fact - that is not really proactive but that was the question.
    A way to see a plan change proactively would be to create a SQL Plan Baseline for the SQL statement with the 'good old' plan and then watch DBA_SQL_PLAN_BASELINES for new rows with that SQL_HANDLE which would indicate that a new execution plan was computed - although not yet used.
    Kind regards
    Uwe Hesse
    "Don't believe it, test it!"
    http://uhesse.com

  • Tracking of changes made using T,codes CJ32, CJ37

    Hello experts,
    I would like to know the changes made(report) using T.Codes CJ32, CJ37, is there any report or T.code which shows the details of changes made by usiong these T.Codes.
    Thanks in advance
    Regards,
    Channa

    Hi,
    Check CJ3B or CJI8 transactions to see the changes like intial budget, supplement, return, transfers etc.
    Regards,
    Sandeep

  • Really urgent: Collective display of material changes made f

    hi,
    i had been assigned a work in which  i have to display that from this time period 1.12.2007 to 31.12.2007, these are the materials in which these are the changes made by these persons.
    can anybody provide me tcode for this ,as help will be definately rewarded.
    plzzz its really urgent.

    HI,
    BUT IWANT TO HAVE COLLECTIVE DISPLY FOR IT.
    PLZZ DAT TCODE . I KNOW DAT DIS TCODE MM04 BU TIT SHOWS FOR SINGLE MATERIAL BUT I WANT IT FOR COLLECTIVE MATERIAL.

  • Transport changes made using se63

    Hi ALL,
    I have made some text changes using se63 in ECC 5 .
    Can you please let me know how cna i move the changes to production server.
    i.e how to attach transport request to the changes made.
    I am changes label for standard screen of XD01
    thnx a million
    ket
    Message was edited by:
            Ketan patel

    Hello,
    Check this:
    http://help.sap.com/saphelp_nw04/helpdata/en/d4/73c33e3a443907e10000000a114084/content.htm
    Regards,
    Vasanth

  • Does Aperture show changes made using Nik Software plugins in its metadata?

    I recently heard on a photography podcast that when you use one of the Nik Software plugins, Aperture records the changes made in its metadata. I have not been able to find this, but I hope its true. Please let me know where this can be found.
    Thanks -
    Dudley Warner

    It was the TWIP Podcast from a couple of weeks ago, and Scott Bourne was speaking. This is from the show notes:
    "Scott points out that the one difference between the way Aperture handles and the way Lightroom handles it is that when it roundtrips back in Aperture it retains and edit list of the adjustments that were done so if you ever need to go back and see what you did you can see the steps and not have to guess at your changes."
    Now that I am re-reading this, I am guessing that the info. is only available if you re-enter the plugin from within Aperture. Although it is not what I originally thought, it would still be pretty helpful. I will check it out tonight.
    Dudley Warner

  • Changes made using "old" version of iTunes not showing up

    A colleague uploaded new thumbnails and created new courses in an old version of iTunes. When I go on our page – using the current version of iTunes - none of the changes are reflected. When I log in as the administrator, I now see it in the “old” version (I used to see the current version/configuration) and all the changes are there. We made these edits a few weeks ago. Any ideas how to fix this?

    Not on the computer.
    If you are logged in to the same account on the phone, you can go through the music and app store to download purchased content directly.

  • Planning Material Where-Used list

    Hi All,
    I wish to know in which materials and plants a Planning Material has been used. How is it possible?What are the transactions involved...kindly help!!!
    Thanks & Regards,
    Deepak Prasanna S

    Deepak,
    I think your query was on planning material which is getting assigned in Materail master MRP3 view. The data should be available in MARC table, right now i dont have access to system to check the field for Planning material, you can check it place your cursor in the planning material field and then use F1 key in key board in the popup screen hit the technical information button to get the field and table details.
    You can use transaction SE16 or SE11 to get the data from table, if you want this to be used frequently then you can create a query using SQVI transaction.
    If your are looking for whereused list of a component in BOM then CS15 will do.
    Regards,
    Prasobh

  • Planning data changes through CJR2  transcation

    Dear all,
    Kinldy let me know how to track changes made in my financial planning through CJR2 . because f these changes , my project planned datas are changed and gross margin reduced.
    I wish to know, is it possible to track the changes made using CJR2 transcation ?  like , when , what and which WBS changed .
    i tried CJI4 but no result .
    Appericiated your help as usual,

    Thanks for your reply  , But my concern is not to get the old value there , I have a hardcopy to serve that purpose, but I really want to know who did it ?  Like user name , time , which WBS got changed . I have tried CJI4 to capture this changes , but I am not getting any values under CJI4.  Is there any other transaction available  to track this changes ?
    Eg. For sales order , any time will get a change report on line by line , I am looking something similar to that .

  • New Products Lunch - Planning with Planning Material

    Hello All
    WE Plan we planning material (strg 63).
    Each finish good is assigned to a planning material and in each planning material we maintain parameters like consumption mode and consumption periods.
    For products current in production this strategy works fine, but for new finish goods that are not yet in production the ,confirmation is a challenge.
    Imagine a planning material that contain both types of materials, in production and a new materials that start production in month 3.
    The consumption indicator is 2 (backwards and foreword) and the backward consumption period is 30 days.
    if you enter a sales order today and if planning allow he gets confirmed for today even thou production only start in month 3.
    Any advice to make sure SAP only confirms after the 3 month even thou planning exists before? and how to make sure that only the planning that  is maintained after the production start is considered even thou the backword consumption is define to look back
    any comment / suggestion is appreciated
    Thanks
    PCoelho

    hi
    In Planning with planning material Planning material  means if there is a material which determines the profitability of the company or which is of great importance to the company.
    The planning strategy "Planning with planning material" is particularly useful if you have several
    finished products with the same main assemblies.
    Here, you define a planning material which contains the common assembly and its BOMs.
    The planning run is carried out for the planning material which triggers the production and
    procurement of the planning material's components.
    The sales order for a finished product which refers to the planning material reduces the planned
    independent requirements of the planning material and simultaneously triggers final assembly.
    When processing the sales order, you can check whether the planned independent requirements
    quantities cover the demand (that is, the availability check as a check against the planned
    independent requirements).
    In the material master record of the planning material, you must enter strategy 60, the consumption
    mode and the consumption periods. In the material master records which refer to the planning
    material, you must enter the planning material as a reference and strategy 60. The consumption
    periods are calculated starting from the planned independent requirements of the planning material.

  • CO88-Error :Perform the planned price change for material

    Hi Experts,
    While running CO88 i get this error. "Perform the planned price change for material ". My material is manage at S and it doesn't have any marked cost. The status is FR and no other status on cost etimate for the article are active. what i shoul do? why if i run the PP order with KO88 i don't have any error?
    Please help i'm facing the closing period.

    Hi,
    If dynamic price change is active in your system the first posting in the new period of this material tries to
    - release a future cost estimate of that period OR
    - change the price to the future price in accounting view
       (if the future price date is reached)
    Unfortunately this dynamic price change does not work in order settlement. Therefore you are asked to perform the price change first by t-code CKME (or CK24).
    If you are using price determination control 3, any price change or release should always be the first transaction in a new period to avoid any inconsistencies.
    The dynamic price release will only release the price with transactions which involve material movement and this is not the case by posting invoices and order settlements.
    if you are in period 12/2009 then a settlement in 12/2009 does not require the release cost estimate of 01/2010.
    But if you are already in 01/2010 therefore settlement in 12/2009 is a posting into the previous period. This will change also data of the current period. Therefore the cost estimate has to be released first.
    Another option, if you don't want to receive this message, would be to change this message from Error to Warning (check note 434752).
    Please follow the following steps:
    T-CD:OMRM
    Message M8 394
    =>you set the message type to '-' for error message M8394, that means no message is to be issued.
    regards
    Waman

  • I am using Outlook 2010. Changes made to my iPhone 4 or my iPad2 appear on each other (tasks, calendar, Contacts) but not in Outlook. Why is this?

    I am using Outlook 2010. Changes made to my iPhone 4 or my iPad2 appear on each other (tasks, calendar, Contacts) but not in Outlook. Why is this?
    Also, changes made in Outlook do not appear on Phone or IpAd

    I'm guessing outlook doesn't support iCloud or vice versa or the settings for iCloud in Outlook are turned off. Just a guess though I don't use Microsoft products if I can help it.

  • Plan changing when using variables instead of constant

    Hi,
    I have a query, when run with the constant values uses a better plan. But when these constants are replaced with variables, plan is changing and taking much longer time to complete. I don't want the query to use a different plan when using the variables in place of constants.
    Please help.
    Thanks

    Probably you got caught by bind variable peeking (if the plans are same for both variables)
    If you have default 10g Statistics gathering job it means you are collecting histograms
    If my bind peeking + histogram assumption is true Check this link to fight with peeking
    http://www.pythian.com/news/867/stabilize-oracle-10gs-bind-peeking-behaviour-by-cutting-histograms
    if deleting histograms doesnt help
    check this link
    http://www.oracloid.com/2006/07/bind-variable-peeking-with-no-histograms/
    A. Coskan GUNDOGAR
    Oracle DBA
    http://coskan.wordpress.com
    ““Knowledge is of no value unless you put it into practice.”.”
    Anton Chekhov

  • Report of changes made by user to a material on a purticular date

    hi,
    i am working on report in which i have to display the changes made by user to a material on a purticular date.
    i am able to display he all fields but i want to 1 more field which is in tcode MM04 i.e. text field(which means discription of te action taken).
    i want to display this field plzz help me out as help will be deinftely rewarded.
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 1:45 PM

    it's possible that there will be no change document for it and in this case you will have an issue because you will have to directly check in the database or enhance this transaction with adding a change document in some customer exit or BADI.
    I wish you good luck
    /wg

  • To create/change material determination records using VB11/VB12 transaction

    To create/change material determination records using VB11/VB12 transactions, do you know any relevant FM's or BAPI's for these transactions instead BDC?
    Thanks in advance.
    regards,
    vamshi

    Thanks for the response. I wrote the BDC.
    Have some problems in BDC for VB12.Uploading ten thousand records at a time.
    Following problems exist.
    Before updating i am reading existing data.
    In   selection condition, if i give ten thousand records
    i am getting dump.
    (ii) In the change material determination third screen
         to delimit the date ( Valid on and Valid to) it does for header not at item level. No option to do at item level.
    thanks,
    vamshi

Maybe you are looking for