ALE Error + Mass deletion of variants for Reports

Hi,
       I have two questions
1- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error  “An Idoc without a message type was passed to the ALE layer”.
I have already check file port is set up correctly and I am passing message type “HROT_BRM”.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something?
Waiting
Bye

There are some function modules like "KYVA_REPORT_VARIANTS_DELETE” or get user variants "RM_GET_VARIANTS_4_REPORT_USER".
- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error “An Idoc without a message type was passed to the ALE layer”.
I have already check file port is set up correctly and I am passing message type “HROT_BRM”.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something?

Similar Messages

  • Mass deletion of variants for Total Records

    Hi there,
    during tranings we create a lot of variants for the Total Records (UCWB->Analysis->Total Records->Save Variant). Is there a way to do a mass deletion of those variants?
    The standard options of deleting variants only allows to delete one variant per selection.
    We work with a SEM BCS EHP 4.
    Thanks for all help,
    Helge

    Helge
    you can do a mass deletion of variants.
    First you will need to find the program name for the Totals Records.  This can be found from the totals records screen when you click the Get Variant button. Across the top of the dialogue box you will see;
    "Variant catelogue for program XXXXXXXXX". 
    Note this program ID.
    Go to TCode SE38
    Key in the program - make sure the Short description for the Program is "List of Totals Records"
    Check the Variants checkbox
    Click on Display
    From the menu - go Variants > Catelogue
    This should give a list of the variants for the Totals Records. If not then you must have the wrong program.
    Click the button which has the picture of the rubbish bin with the words "Selection Criteria".
    This will then allow you to put a check mark against all the variants you want deleted.
    Click the button which has the picture of the rubbish bin with the word "Variant"
    This will then mass delete your variants.
    Regards

  • Error reading cluster table COIX for report 13BUD1A

    Hi All,
    We have issue when display report 13BUD1A using t.code CJE0 in ECC6 system. The error message appear as per below:-
    Error reading cluster table COIX for report 13BUD1A (ID=13BUD1A     KP  01RPSCO_X                        0)
    Message no. KH050
    Diagnosis
    The report structure for report 13BUD1A is stored in the cluster table COIX. An error occurred while the system was reading this data (ID = 13BUD1A     KP  01RPSCO_X                        0).
    Table TKEB1 (Report List) contains administration information for report 13BUD1A. Consequently, table TKEB1 has an entry for the report, but table COIX does not.
    The error may have resulted following a transport -- COIX has not yet been transported to the current client but TKEB1 is already there.
    Procedure
    If it is a transport problem, see if you can execute report 13BUD1A in client 000. If so, import it to the current client again.
    If it is not a transport problem, delete report 13BUD1A from Tables TKEB1 and TKEB2.
    Need you advice, how can we solve this error.
    Thank You.

    Dear AP,
    Thanks for your reply. FYI, we dont have access to client 000. And how to resolve this issue without access client 000?

  • Selection screen variant for report

    Hi,
    Can we restrict the selection screen variants for reports by user? For example my report is ZREPORT. Different users can save variants for the report. When they choose a variant for executing the report, they would like to see only the variants they created.
    By default SAP lists all variants created (irrespective of who created).
    Thanks
    Anil

    Hi,
      If you want the other users doesn't want to execute (Not see) other variant..you can check if that user has created the variant in the AT SELECTION-SCREEN event..
      By checking VARI-VARIANT against the table VARID and check if sy-uname <> VARID-ENAME.
    Thanks,
    naren

  • How to delete the variant in report

    Hi Friends ,
    i am unable to delete the Variant from the Report.
    please find the error in attached screen shot.
    Regards,
    Muralidhar.

    Hi ,
    You can check weather variant is protected or not in table VARID and field 'Indicator' by passing your variant name in field 'Variant'..
    https://help.sap.com/saphelp_nw70/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
    please check this link it shows how to make a variant protected... ex: if you create a variant and make it protected then only you can make the value changes in that variant it won't allow other users to make changes in the values.
    RSVARENT this is the program which cancels the protected variants..
    Regards,
    Nitin

  • Issue with saving SAP& variant for report as per OSS note 1885125

    Hi,
    I'm implementing OSS note 1885125 and it instructs me to adjust several SAP& variants:
    The variants of the report RSUSR070 (SAP&_AUTH, SAP&_CHANGE, SAP&_PROFIL, SAP&_STANDARD,
    SAP&_TRANSAKT, SAP&_VALUES)
    must be adjusted.
    Call transaction SE38 for the report RSUSR070 in the client 000. Change the values for the relevant
    variants. On the selection screen, choose "+" ("All Selections" (Ctrl+F7)):
    l Select the "All Roles Irrespective of User Assignment" radio button.
    For the variant SAP&_BENU, you must select the "With Valid Assignment Of" radio button.
    If the variants are protected, run the report RSVARENT for each variant."
    Now I'm in client 000 and I can unprotect the variants with report RSVARENT, but then SAP tells me that SAP& is the SAP name space, and that I need to create new variants. So it doesn't let me save these. The whole point of the OSS note requesting the SAP& variants to be adjusted is because they are using in SAP standard transaction codes:
    S_BCE_68001418
    Roles by Role Name
    S_BCE_68001419
    Roles by User Assignment
    S_BCE_68001420
    Roles by Transaction Assignment
    S_BCE_68001421
    Roles by Profile Assignment
    S_BCE_68001422
    Roles by Authorization Object
    S_BCE_68001423
    Roles by Authorization Values
    S_BCE_68001424
    Roles by Change Data
    S_BCE_68001425
    Roles by Complex Criteria
    S_BIE_59000249
    Roles By MiniApp
    Any advice how to get round this issue please?
    Thank you
    Philipp

    Ansel,
    Thanks again!
    In RSA1 ->Transport Connection, yes, I can see the Source System objects.
    In the Source System objects, I have selected the ECC source system and dropped it to the right panel.
    Now I can a list of Datasource and Transfer Rules there.
    1) Does it mean these are all the source system related objects?
    I then create the normal transport request to capture all the objects. And release the Transport.
    2) Now how can I export this transport?
    What I try to do is to delete the existing SAP Source System. Create the new SAP Source System, then import back all the source system related objects...... so that my existing data model will not disappear after deleting and creating the new SAP Source System.
    Is the following steps correct?
    1) Collect all the Source System related objects and capture in Transport.
    2) Release and export the Transport (but how?)
    3) Delete the SAP Source System
    4) Create new SAP Source System
    5) Import the existing SAP Source System related objects (but how?).
    Please help, thanks in advance.

  • Error while creating logical port for Reporting

    Hi,
    In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
    When i am trying to create the logical port, i am getting an error saying,
    " SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
    https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
    I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
    And in case it has to be created, how to resolve this SRT framework exception?
    ~ Ramanath.

    Hi,
    the consumer proxy  /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
    However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
    So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
    You should find one entry. Select it and click "Apply Selection".
    Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
    Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
    Copy this value and go to your SAP GUI -> Transaction SM59.
    Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
    Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
    If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
    Regards,
    Holger.
    PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

  • FPN: No ESID found error while invoking BEx iviews for Reports.

    Hi Everybody,
    We have a federated portal network [FPN] setup. We are EP 7 SP15 for both Consumer portal and BI producer portal.
    The content is delivered to users via RRA Remote Role Assignment ] in consumer portal for BI portal roles from Producer bi portal.
    The problem is when we are trying to access BEx iviews for Reports i get the error: Internal error No esid found.
    The BEx iview for Queries are running fine but the problem is for BEx iviews for Reports in consumer portal.
    All reports are running fine in producer BI portal.
    Consumer portal AD UME and producer portal is ABAP UME.
    Please help to fix this.
    Below is the trace.
    #1.5 #00237DA36C70002900000015000058A7000477861BB01CF2#1257317780692#com.sap.security.core.umap.imp.UserMapping#sap.com/irj#com.sap.security.core.umap.imp.UserMapping.getInverse
    MappingData(String, ISystemLandscapeObject)#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_29##0#0#Info##Java###Found local user "" being mapped to backend user ""
    for system .#3#USER.R3_DATASOURCE.RAMA#RAMA#"(null)"#
    #1.5 #00237DA36C70002900000016000058A7000477861BBFA58B#1257317781710#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeEx
    ception#RAMALINX#2777#####SAPEngine_Application_Thread[impl:3]_29##0#0#Error#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException:
    Error: Internal error. No esid found.
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: Internal error. No esid found.
         at
    com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._createController(BIRuntimeService.java:687)
         at
    com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.createController(BIRuntimeService.java:642)
         at
    com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:343)
         at
    com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
         at
    com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
         at
    com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at
    com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at
    com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
    (PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at
    com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at
    com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest
    (PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at
    com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run
    (Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(AccessController.java:246)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service
    (Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service
    (InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
    (HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
    (RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request
    (Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at
    com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at

    Darryl
    Thank you for the quick reply.. I did check and the system property field was blank
    I also wanted to point out that we are not experiencing this issue in our Dev enviornment, and all content was transported to Q.  Only in Q are we getting this issue.
    Please advise

  • Mass deletion of PRs for a plant

    Hi,
    We have a requirement where we want to delete all purchase requisitions of a particular plant.
    Is there any standard transaction for this?
    How to go about this?
    Thanks

    hi
    mass deletion of PR is not  possible through MASS transaction
    u have togo for the LSMW
    record the PR deletion and run it for mass PRs
    regards
    KI

  • Dynamic Variant for Report

    Hi,
    How to put current date in report output through variants.
    I should not use events, when user selects variants then i should place the current date in my selection-screen.
    help full information will be appreciated.

    Hi Rams,
    U have to create a dynamic variant for this.
    Fallow these steps.
    1. Fill all the selection screen values including date(Current date).
    2. Save it as variant(ctrl+S), give variant name and description.
    3. In the same screen u can see some check boxes corrosponding to each selection screen parameter.
    Now for the date field select the check box under
    L Selection variable and then press the push button selection variables in the tool bar.
    4. Now u will get the date range in the next screen.
    5. Here press the yellow light under D, it will become green colour.
    5. Next press drop down(Small arrow pointing down at the end of date)
    6. Now u will get a list of options for calculations.
    7. Here select current date.
    8. Now save the variant.
    This completes setting up of dynamic variant.
    Now when ever u select this variant it will populate the selection screen with current date and remaining fields with the data u save while creating the variant.
    Hope this will solve ur problem.
    Thanks,
    Vinod.

  • How do we create a variant for report which runs in the background?

    Hi,
    I want to create a report which will have some variants and will be running in the background?
    The main intention is to transfer the data from one database into another. Please explain the step by step process.
    Regards
    Amit

    Hi Amit,
          When you run a report program in foregorund(If you have a selction-screen), by pressing F8 button, it takes you to the screen where when you press execute button, the report is executed.
          In this screen, you can enter the requirec values which you wish to store in the variables in the selection-screen and press SAVE button, then a variant will be created. You can create the required variants for your report and then when executing the same report in background, the process goes in this way,
    Go to SE38->Program-> Execute->Background, there you can give the variant name and press EXECUTE IMMEDIATELY and your program runs in background for the given variant.
    Hope this is helpful to you. If you need further information, revert back.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • Setting Default Variant for Report Trans

    Hi All,
    Is there a way to set a default Variant to a reporting transaction? for example for ME2N how do I set a default Variant to be imported to the selection screen automatically once the report transaction is called?
    This is useful if the user uses the same variant all the time.
    Thanks in advance!

    Pls try the below example
    I give you one example,
    Enter t-code ME2N, Then click on Dynamic field selection button.
    Then double click on created by field enter enter any user id in it.
    Then click on save button.After click on this screen your can see one other screen for variant.
    Here you have to assign variant name and meaning. You can also change field status for report with help of this screen.
    Before click on save button, tick on protect check box button and then click on save.
    Then exit from transaction and enter ME2N.
    Click on Get variant button. Here you can see list of variant, select your variant and get report as per your requirement.
    by
    Rajj

  • How to create current version variants for   report using RS_CREATE_VARIANT

    Hi experts,
                      When i am using RS_CREATE_VARIANT to create a variant for a standard report then a message is coming that the 'Created variant is not of current version'. .How should i avoid this. If i want to create a variant of current version then what parameters have to populated in the FM.

    Hi,
    try these..
    FASU_RS_CHANGE_CREATED_VARIANT change variant w/o selection screen - client dependent
    FASU_RS_CREATE_VARIANT         create variant (w/o selection screen) - client dependent
    Arunima

  • Urgent !! Error related to NT service for Report Server in 6i

    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ashwani Dave ([email protected]):
    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards<HR></BLOCKQUOTE>
    I think something is either active or hung listening on the same socket Oracle Reports is trying to run on. Remove the conflict by using another port. If Oracle Reports/Forms has crashed and hung the socket the only easy way to fix the problem is to three finger salute the machine.

  • Cant set status released for Generation Variant for report category IBD_MSD

    Dear EH&S people,
    I am trying to upload a vendor MSDS'. I am not succesfull in this. The reason is that the status of the generation variant is not "Released".
    I am not able to set the status released in the Generation variant. I am using report category IBD_MSD which should be the standerd one for Vendor MSDS.
    Together with an abap consultant we found via debugging of the matchcoded of the search of the status that he takes the DMS document type SBR as a basis. It should however be IBD.
    Has somebody encounter this problem before and have a solution for this?
    Is there somewhere customizing which controls for a certain category which DMS document type to use?
    Thanks in advance for your answer.
    Regards,
    Pascal

    Hi All,
    I found the solution.
    I looked at the detailed customizing of the document type SBR. Note 1091699 explained detailed settings of the different document types.
    SBR was not correct customized.
    It sounds strange that SBR is used for the report generation status for Vendor MSDS. I think it is because SAP treads it as if it is a raw version. So that could be an explenation why it searches for the status of that document type.
    After I updated the SBR-type correctly, I was succesfull in uploading Vendor MSDS. The DMS type which was used to save the document was IBD.
    Thanks all for your help.
    Issue closed.
    Regards,
    Pascal

Maybe you are looking for