ALE experts: please help Error in posting idocs

Hi All,
I am posting an idoc from ECC 5.0 to 3.1 I system thru ALE/Idoc methodology.
The partner settings, customer model are set up in ECC 5.0, distributed the customer model and I can see the model in the 3.1I system. The partner settings in the inbound 3.1i is creating some issue when I tested the scenario by sending an idoc from 5.0 to 3.1I. The error status is 63 with message "No partner profile exists for sender LS DEVCLNT300, message type DESADV".
Is it mandatory that the outbound process code is same as the inbound process code. Anyways for me, both the process codes are same but having different funtion modules ONE FOR OUTPUT AND OTHER FOR INPUT both are customized "ZIDOC_OUTPUT_xxxx" AND "ZIDOC_INPUT_xxxxx". I guess this part is creating issue to me. ZIDOC_INPUT_xxxxx is empty which doesn't contains any source code.
The reqmt is very urgent. Any help in identifying the issue will be appreciated
Thanks
Ricky

Hi,
the easiest way is to do it with a distribution model
(even if you don't need it)
create a distribution model in BD64
(sender DEVCLNT300 with message type DESADV)
save it and from there - generate partner profiles
then everything will work
rembmer to check the partner function in We20
(maybe you don't need LS and you have it or the other way round)
but try with bd64 first - it will work
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error in posting IDOC ORDERS.ORDERS05

hi,
dear all,
i am getting error in posting IDOC ORDERS05.
IDOC has arrived on system but with status 51,
<b>it says:
VKORG, VTWEG, SPART cannot be determined for customer , vendor</b>
can you please tell me how to map above specified fields.They are under which segment.
I am sending XML file with fields thru XI.
Thanks.

hey rajeev,
thanks very much for your patience to deal with this basic questions expected from me who is just new to XI
really thanks.
but RAJEEV, as you said we have to add the same IDOC to inbound to R3 if R3 is receiving that IDOC and in OUTBOUND if R3 is sending right?
hi, sorry to interrupt you more :
take my scenario of IDOC ->XI->FILE.
i added that IDOC type in receiving LS that is FILE LS in OUTBOUND side,
and i do not add anything in OUTBOUND parameters of my sending LS that is R3 system.
i am using we19 to send IDOC.
Before Sending IDOC i am filling EDIDC segment with these parameters is it right?
Sender Information:
Partner number: SAPLS
Port: Port defined on XI pointing to R3.
Partner type :LS
Receiver Information:
Partner Number : FILELS
Port: Port defined on R3 pointing to XI.
SO, Provided that i entered following values in EDIDC segment and i do not add anything IDOC type in outbound parameters in R3(sending system),
i add that IDOc in outbound parameters under LS defined for File system,it worked.
You got my point?
sorry for writing such a long thread? but please resolve it RAJEEV.
Thanks.

Please help Error while creating JCo

Hi experts,
I am working with the tutorial to display the flight details through Bapi in Webdynpro Java . I successfully deployed the project and now when i logon the content Administrator and select my project form local tree where on the JCo Connections tab when i click create button it saying
500 Internal Server Error
Failed to process request. Please contact your system administrator.
The initial exception that caused the request to fail, was:
java.lang.NullPointerException
at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateJCODestinations(NameDefinition.java:285)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.updateNavigation(NameDefinition.java:250)
at com.sap.tc.webdynpro.tools.sld.NameDefinition.wdDoInit(NameDefinition.java:157)
... 45 more
Experts please help me what's the problem and what i have to do.
-Neo

Hi Neo,
Sorry for the typo mistake...it is Visual Administrator and not Visual Composer.
Steps are as follows:
1. D:\usr\sap\PI1\JC01\j2ee\admin\go.bat
2. Connect using your administrator password.
3. Goto Server->services->SLD Data Suppier->HTTP Settings/ CIM Client Generation Settings
4. Enter details: Host, port, user, password for SLD system.
5. Save and Test the CIMClient test.
Regards,
Sangeeta
PS: Do award points if you find the reply helpful

Please help error -9808 when downloading apps in itunes store anyone can help me out

please help error -9808 when downloading apps in itunes store anyone can help me out

Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808

BDC - table control - experts please help

Hi experts,
Please help. I am in need of your help.
I am working with BDC and I have a table control in one of the screen. Table control has a check box in the first column. While recording how I entered the data is : I select the check box in a row, enter two values in next two columns of that row and then hit enter then the other columns in that row turn from grey to white (initially these columns are greyed out).
NOw in BDC when I run my session in foreground, I am able to check(select) the check box and enter the values in next two columns and then I have a Enter OKCODE. But when I hit enter it is not able to recognize the row and its unable to turn the greyed out columns in that particular row to white.
Is there a way to specify in my program that I am hitting enter in one particular row.
Please help. Let me know if something is not clear. Very urgent . Pleasee respond. Thanks

Hi Rich,
Thanks for the replies. I will try that. I got one more doubt. While manually creating the recipes using C201, there is a screen Recipe header. When I record this transaction, I see a different screen for the Recipe header. Fro example the screen numbers are like 4210(manual) and 4211(recording).
But my problem is there are two fields which are missing in the screen which I am getting while recording C201. These two fields are present on the screen for manual creation. I need to enter those two fields while I record. But how can I do this.
Please help.

SQL experts please help for a query

I have following table1.
What query can give the result as given below, SQL experts please help on this.
TABLE1
Event DATETIME
in 2/JAN/2010
out 2/JAN/2010
in 13/JAN/2010
out 13/JAN/2010
in 5/JAN/2010
out 5/JAN/2010
RESULT REQUIRED FROM THE SQL QUERY
COL1_IN COL2_OUT
2/JAN/2010 2/JAN/2010
13/JAN/2010 13/JAN/2010
5/JAN/2010 5/JAN/2010

I tried to help, but this puzzles me.
Why is this not returning pre-selected set of rows, why it's doing some merge join cartezian ?
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from table1;
EVENT      DATETIME
in         2/JAN/2010
out        2/JAN/2010
in         13/JAN/2010
out        13/JAN/2010
in         5/JAN/2010
out        5/JAN/2010
6 rows selected.
SQL> explain plan for
2 with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
Explained.
SQL> set wrap off
SQL> set linesize 200
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 185132177
| Id | Operation            | Name   | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |        |     9 |   288 |     8   (0)| 00:00:01 |
|   1 | MERGE JOIN CARTESIAN|        |     9 |   288 |     8   (0)| 00:00:01 |
|* 2 |   TABLE ACCESS FULL | TABLE1 |     3 |    48 |     3   (0)| 00:00:01 |
|   3 |   BUFFER SORT        |        |     3 |    48 |     5   (0)| 00:00:01 |
|* 4 |    TABLE ACCESS FULL | TABLE1 |     3 |    48 |     2   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   2 - filter("EVENT"='in')
   4 - filter("EVENT"='out')
Note
   - dynamic sampling used for this statement
21 rows selected.
SQL> with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
COL1_IN         COL2_OUT
2/JAN/2010      2/JAN/2010
2/JAN/2010      13/JAN/2010
2/JAN/2010      5/JAN/2010
13/JAN/2010     2/JAN/2010
13/JAN/2010     13/JAN/2010
13/JAN/2010     5/JAN/2010
5/JAN/2010      2/JAN/2010
5/JAN/2010      13/JAN/2010
5/JAN/2010      5/JAN/2010
9 rows selected.
SQL>

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround.

Please help with SSL POST: Servlet returns Error 500

I am struggling for many days to get a Java program to log in to an SSL page. The program is supposed to track ADSL usage statistics from https://secure.telkomsa.net/titracker/, but I never seem to get around Server returned Error 500.
Could anyone please help me understand what I am doing wrong by looking at the method I used. (It seems on the server side it is a jsp servlet that handles authentication).
Any help is deeply appreciated!
I copy-paste the method directly from NetBeans:
CODE>
void connectHTTPS(String url){
try {
URL page = new URL(url); // login page necessary to get a jsp session cookie
//------------ SET UP SSL - is it right?
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
try {
//if we have the JSSE provider available,
//and it has not already been
//set, add it as a new provide to the Security class.
final Class clsFactory = Class.forName("com.sun.net.ssl.internal.ssl.Provider");
if( (null != clsFactory) && (null == Security.getProvider("SunJSSE")) )
Security.addProvider((Provider)clsFactory.newInstance());
} catch( ClassNotFoundException cfe ) {
throw new Exception("Unable to load the JSSE SSL stream handler." +
"Check classpath." + cfe.toString());
URLConnection urlc = page.openConnection();
urlc.setDoInput(true);
*Get the session id cookie set by the TelkomInternet java server
String cookie = urlc.getHeaderField("Set-Cookie");
//textpane.setText(totextpane);
textpane.setText(cookie);
//---------------- form an auth request and post it with the cookie
String postdata =URLEncoder.encode("ID_Field","UTF-8")+"="+URLEncoder.encode("myusrname","UTF-8")+"&"+URLEncoder.encode("PW_Field","UTF-8")+"="+URLEncoder.encode("mypwd","UTF-8")+"&"+URLEncoder.encode("confirm","UTF-8")+"="+URLEncoder.encode("false","UTF-8");
// set the servlet that handles authentication as target
URL page2 = new URL("https://secure.telkomsa.net/titracker/servlet/LoginServlet");
// cast to httpConn to enable setRequestMethod()
HttpURLConnection urlc2 = (HttpURLConnection)page2.openConnection();
// formulate request with POST data urlc2.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
urlc2.setRequestMethod("POST"); // experimental
urlc2.setRequestProperty("Content-Length",""+postdata.length());
urlc2.setRequestProperty("User-Agent","Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)");
urlc2.setRequestProperty("Accept-Language","en-us");
urlc2.setUseCaches(false);
urlc2.setDoOutput(true);
urlc2.setDoInput(true);
urlc2.setFollowRedirects(true); // ??
//send cookies
urlc2.setRequestProperty("Set-Cookie", cookie); // or "Cookie" - doesn't work either
//write other data
PrintWriter out = new PrintWriter(urlc2.getOutputStream());
out.print(postdata); // username and password here
out.flush();
out.close();
//---------------- get the authenticated page with real ADSL statistics
BufferedReader br = new BufferedReader(new InputStreamReader(urlc2.getInputStream()));
String totextpane = "";
String buffer = "";
while (buffer != null) {
try {
totextpane = totextpane + "\n" + buffer;
buffer = br.readLine();
} catch (IOException ioe) {
ioe.printStackTrace();
break;
textpane.setText(totextpane);
} catch (Exception ex) {
System.err.println(ex.getMessage());
---- END CODE---
Thank you very much for any attempt at helping with this problem!

I am struggling for many days to get a Java program to log in to an SSL page. The program is supposed to track ADSL usage statistics from https://secure.telkomsa.net/titracker/, but I never seem to get around Server returned Error 500.
Could anyone please help me understand what I am doing wrong by looking at the method I used. (It seems on the server side it is a jsp servlet that handles authentication).
Any help is deeply appreciated!
I copy-paste the method directly from NetBeans:
CODE>
void connectHTTPS(String url){
try {
URL page = new URL(url); // login page necessary to get a jsp session cookie
//------------ SET UP SSL - is it right?
System.setProperty("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
try {
//if we have the JSSE provider available,
//and it has not already been
//set, add it as a new provide to the Security class.
final Class clsFactory = Class.forName("com.sun.net.ssl.internal.ssl.Provider");
if( (null != clsFactory) && (null == Security.getProvider("SunJSSE")) )
Security.addProvider((Provider)clsFactory.newInstance());
} catch( ClassNotFoundException cfe ) {
throw new Exception("Unable to load the JSSE SSL stream handler." +
"Check classpath." + cfe.toString());
URLConnection urlc = page.openConnection();
urlc.setDoInput(true);
*Get the session id cookie set by the TelkomInternet java server
String cookie = urlc.getHeaderField("Set-Cookie");
//textpane.setText(totextpane);
textpane.setText(cookie);
//---------------- form an auth request and post it with the cookie
String postdata =URLEncoder.encode("ID_Field","UTF-8")+"="+URLEncoder.encode("myusrname","UTF-8")+"&"+URLEncoder.encode("PW_Field","UTF-8")+"="+URLEncoder.encode("mypwd","UTF-8")+"&"+URLEncoder.encode("confirm","UTF-8")+"="+URLEncoder.encode("false","UTF-8");
// set the servlet that handles authentication as target
URL page2 = new URL("https://secure.telkomsa.net/titracker/servlet/LoginServlet");
// cast to httpConn to enable setRequestMethod()
HttpURLConnection urlc2 = (HttpURLConnection)page2.openConnection();
// formulate request with POST data urlc2.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
urlc2.setRequestMethod("POST"); // experimental
urlc2.setRequestProperty("Content-Length",""+postdata.length());
urlc2.setRequestProperty("User-Agent","Mozilla/4.0 (compatible; MSIE 5.5; Windows NT 4.0)");
urlc2.setRequestProperty("Accept-Language","en-us");
urlc2.setUseCaches(false);
urlc2.setDoOutput(true);
urlc2.setDoInput(true);
urlc2.setFollowRedirects(true); // ??
//send cookies
urlc2.setRequestProperty("Set-Cookie", cookie); // or "Cookie" - doesn't work either
//write other data
PrintWriter out = new PrintWriter(urlc2.getOutputStream());
out.print(postdata); // username and password here
out.flush();
out.close();
//---------------- get the authenticated page with real ADSL statistics
BufferedReader br = new BufferedReader(new InputStreamReader(urlc2.getInputStream()));
String totextpane = "";
String buffer = "";
while (buffer != null) {
try {
totextpane = totextpane + "\n" + buffer;
buffer = br.readLine();
} catch (IOException ioe) {
ioe.printStackTrace();
break;
textpane.setText(totextpane);
} catch (Exception ex) {
System.err.println(ex.getMessage());
---- END CODE---
Thank you very much for any attempt at helping with this problem!

Help Required to post IDOC from R/3 to XI

Hello,
I need help to post IDOC from R/3 to XI
My XI System --- E11 on client 001
My R/3 System -- IXS on client 812
In R/3
1. I use Tx SM59 to make RFC Dest --- E11CLNT001 (Client will be 001 Pointing to my XI System )
2. I use TX WE21 to make Port -- A00020 which is using above RFC Dest
3. I use TX WE20 to make Partner Profile -- RECE ( IDOC Outbound Parameter- MATMAS which is using above Port)
In XI
1. I use TX SM59 to make RFC Dest --- E11812 (Client will be 812 Pointing to my R/3 System )
2. I use TX IDX1 to make Port --- SAPB6M (Client will be 812 and RFC Dest -- E11812 )
3. I use TX WE20 to make Partner Profile -- B6MTEST ( IDOC Inboubnd Parameter- MATMAS )
While Posting data from R/3
Recipient Port --- A00020
Recipient Partner No -- RECE
Recipient Partner Type --- LS
Sender Port --- SAPB6M
Sender Partner Number -- B6MTEST
Sender Partner Type --- LS
I am getting error " Could not post IDOC to R/3".
Please let me know where are my setting are incorrect
Regards

In R/3
1. I use Tx SM59 to make RFC Dest --- E11CLNT001 (Client will be 001 Pointing to my XI System )
2. I use TX WE21 to make Port -- A00020 which is using above RFC Dest ( THIS PORT NAME SHOULD BE IN THE FORMAT SAPSID, A00020 (is it you SAPSID, else it will throw error)
3. I use TX WE20 to make Partner Profile -- RECE ( IDOC Outbound Parameter- MATMAS which is using above Port)
In XI
1. I use TX SM59 to make RFC Dest --- E11812 (Client will be 812 Pointing to my R/3 System )
2. I use TX IDX1 to make Port --- SAPB6M (Client will be 812 and RFC Dest -- E11812 ) ( THIS PORT NAME SHOULD BE IN THE FORMAT SAPSID, A00020 (is it you SAPSID, else it will throw error)
3. I use TX WE20 to make Partner Profile -- B6MTEST ( IDOC Inboubnd Parameter- MATMAS ) ( Not require in SAP XI)
chenage the PORT NAME IN R/3 it should work.

Authorization error in posting IDoc

Hi,
I have completed configuration of File to IDoc scenario. When File adapter has picked up the file from FTP server, the message is processed with outbound error.
To find out the error occured at the outbound side, I ran the transaction 'SM58' which explained that XIAFUSER does not have authorizations to post the IDoc to destination system. Can somebody provide what authorizations should be given to this user to facilitate the processing of message.
In another instance the same error has resulted but notifying the different user. This time WF-BATCH does not have authorizations to post the IDoc to destination system.
As per my understanding there should be some system configuration where you have an option of specifying the user for posting IDocs to destination system.
Please confirm whether my understanding is correct and also let me know the where it is done?
Regards,
Suraj

Hi Suraj,
The user id which you are using in your RFC destination will be of your target system to login. This user id should be having all SAP_ALL authorizations attached into their profile.
Pls do try with the help of your basis by assigning this profile to your WF-BATCH user.
Cheers
JK

Error in Posting IDoc

Hi All,
I am getting the following error while posting an IDoc from XI to R3 in (SXMB_MONI).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Basic type ORDERS02 does not exist</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Basic type ORDERS02 does not exist</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Where I should define ORDER02 basic type ?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
You define your basic type in your partner profile settings, and i think doing the same will solve your problem. Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
I hope this helps you solve your problem.
Regards,
abhy
PS: AWARD POINTS FOR HELPFUL ANSWERS.

Error while posting IDoc

Hi,
i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

First ,
check the partner profiles in R3,
i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
defining a logical system is in SALE.
then ditribute u r the model in BD 64
once every thing is OK in R3
on PI.
create a RFC destination of type R3 which points to R3 , try remote log-on .
this will be used in receiver chaneel
and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
and one of the following should be in place.
check 'apply control record from payload' if ur explictly passing Control record from mapping
otherwise,
check sender service and receiver service in Receiver agreement and select appropriate systems.
Regds,
Suresh

Please help with a Poster Frame

I have imported an FLV into Flash using "Video Import" and selected a prebuilt skin that gives play, volume and caption control. The movie has autoplay turned off so when I viewed on the webpage it shows a black first screen and the skin beneath it. I would like to insert a poster frame that will hide when the user presses play on the skin. I was a novice with AS 1 and 3.0 is making me facepalm. Please help, I've already tried Flashkit and Actionscript.org and not gotten any answers. Thanks!!

Okay in Frame 1 I have an AS layer I copied your code into, layer two is the movie clip with the image named 'myPoster' and the third layer contains the FLV playback named 'myVideo' so I changed the names in the code to:
mvVideo.addEventListener(MouseEvent.CLICK,f):
function f(e:MouseEvent):void{
removeChil((myPoster);
I get the following compiler errors and publish preview shows just the image:
Scene1,Layer 'Action Script', Frame 1, Line 1 1078: Label must be a simple identifier.
Scene1,Layer 'Action Script', Frame 1, Line 4 1084: Syntax error: expecting rightparen before semicolon.
So I tried modifying the code to:
mvVideo.addEventListener(MouseEvent.CLICK,f);
function f(e:MouseEvent):void{
removeChil((myPoster));
Which fixed the original errors but still only the image shows and I get new compiler errors.
Scene1,Layer 'Action Script', Frame 1, Line 4 1180:Call to a possibly undefined method removeChil.
Scene1,Layer 'Action Script', Frame 1, Line 4 1120: Access of undefined property myPoster.
Scene1,Layer 'Action Script', Frame 1, Line 1 1120: Access of undefined property myPoster.
Thanks for your patience and help!

HBR running error (Urgent, please help) Error connecting to Essbase Server

Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
Eric

I am actively using the EAS, but the error is suddenly come that I think I am not logout by server

ALE experts: please help Error in posting idocs

Similar Messages

Maybe you are looking for