ALE : Fields Z are not transferred.
Hi,
we need transferring through ALE 3 fields of customers (Z) belonging to Infotype 21, but we have not been able to do that.
What we have done:
In Sender:
1.-Create segment ZE1P0021 with additional fields (we31).
2.-Create enhancement to object HRMD_A06 (base) (we30).
3.-All of that is active and released.
4.- Run the BADI HRALE00OUTBOUND_IDOC
METHOD if_ex_hrale00outbound_idoc~idoc_data_for_receiver_modify .
DATA: lt_cps TYPE STANDARD TABLE OF hrobject,
ls_e1pad21 TYPE e1pad21,
ls_plogi TYPE e1plogi,
ls_e1pityp TYPE e1pityp,
ok TYPE i.
DATA ls_idoc_data TYPE edidd.
DATA ls_e1p0021 TYPE e1p0021.
DATA: ls_ze1p0021 TYPE STANDARD TABLE OF ze1p0021,
wa_ze1p0021 TYPE ze1p0021.
DATA: t_pa0021 TYPE STANDARD TABLE OF pa0021,
wa_pa0021 TYPE pa0021.
DATA: ls_begda TYPE pa0021-begda,
ls_endda TYPE pa0021-endda,
ls_pernr TYPE pa0021-pernr.
ok = 0.
LOOP AT idoc_data INTO ls_idoc_data WHERE segnam = 'E1P0021'.
DELETE idoc_data INDEX sy-tabix.
wa_ze1p0021 = ls_idoc_data-sdata.
ls_begda = wa_ze1p0021-begda.
ls_endda = wa_ze1p0021-endda.
ls_pernr = wa_ze1p0021-pernr.
SELECT SINGLE * INTO wa_pa0021 FROM pa0021
WHERE pernr = ls_pernr
AND begda = ls_begda
AND endda = ls_endda.
IF wa_pa0021-objps = wa_ze1p0021-objps.
wa_ze1p0021-tpasg = wa_pa0021-tpasg.
wa_ze1p0021-vaend = wa_pa0021-vaend.
wa_ze1p0021-zzrut = wa_pa0021-zzrut.
ls_idoc_data-segnam = 'ZE1P0021'.
ls_idoc_data-sdata = wa_ze1p0021.
APPEND ls_idoc_data TO idoc_data.
ENDIF.
ENDLOOP.
Idoc setting gets as follow:
To execute PFAL, error 26 (syntaxes) u201Cnew segment is not recognizedu201D is displayed.
It is possible to transfer forced.
In Receiver:
1.- Create segment ZE1P0021 with additional fields (we31).
2.- Create enhancement the object HRMD_A06 (base) (we30).
3.- All of that is active and released.
4.- From enhancement RHALE001 it is activate the User-Exit EXIT_SAPLRHAL_002 (HR-CA: ALE Inbound Processing: Changing Infotype Data) with next code:
DATA : s_pa0021 TYPE ty_pa0021.
IF sdata_name = 'ZE1P0021'.
s_ze1p0021 = sdata_data.
MOVE-CORRESPONDING s_ze1p0021 TO s_pa0021.
s_pa0021-mandt = sy-mandt.
pnnnn_data = s_pa0021.
ENDIF.
5.- Idoc appears with error 52 and the Infotype 21 it is not updated
please any help
Lidia
Edited by: Lidia Correa on Nov 23, 2009 10:37 PM
Edited by: Lidia Correa on Nov 23, 2009 10:40 PM
Hi Lidia
1. What applies to HRMD_A, also applies to HRMD_ABA.
2. If you enhance a segment of an infotype, for which a conversion routine exists (CONVERT_Pxxxx_TO_E1Pxxxxx, where xxxx is the infotype; for example, CONVERT_P0002_TO_E1P0002), you need to create your own conversion routine and call EXIT_SAPLRHAL_003 "HR-CA: ALE outbound processing: Conversion Infotype/Seg" from the customer exit.
For example:
- If the infotype is defined for several IDoc segments, you should define all segments as Z segments.
- Copy function module CONVERT_P0002_TO_E1P0002 into Z_CONVERT_P0002_TO_Z1P0002 and ensure that the new Z segment is defined and used instead of the old E segment.
- This Z function module should return parameter CONVERTED with X.
- Create the following (or similar) source code in customer exit EXIT_SAPLRHAL_003 (transaction SMOD/CMOD)
CONSTANTS: c_0002(4) TYPE c VALUE '0002'.
IF INFTY_NAME = c_0002.
CALL FUNCTION 'Z_CONVERT_P0002_TO_Z1P0002'
EXPORTING pnnnn_data = pnnnn_data
IMPORTING converted = converted
subrc = subrc
TABLES error_tab = error_message
CHANGING sdata_data = sdata_data
EXCEPTIONS OTHERS = 0.
ENDIF.
- Check whether you have already implemented Note 1005257.
Source: SAP Note - 105148
Hope this helps
Best Regards
Reddy
Similar Messages
-
I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result. I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question. -
Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
JeevaHello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!
-
We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal -
Free of charge items, ie price = £0.00 are not transferred to backend. PO created with held status, but the SRM PO item IR flag is selected. If we manually amend the SRM PO item to remove the 'invoice receipt' flag, then save the PO, the PO does get to the backend with a price of zero, the IR flag de-selected and the 'free' item flag selected.
How do we manage to get the PO with free items to the backend without having to manually change the held PO in SRM? We are on SRM 5.0 using extended classic.Hi
<b>We have done this type of requirment.. several times.. This is easily possible ..</b>
<u>You need to Implement the BADI - BBP_CREATE_PO_BACK using SE18 Transaction.</u>
<b>Either you can do this sample code inside BAPI (Make changes accordingly) or inside the BADI - BBP_CREATE_PO_BACK / BBP_CREATE_PO_BACK_NEW depending on your requirement.</b>
LOOP AT po_items INTO ls_po_items WHERE net_price IS INITIAL.
* Reset the IR Indicator for Items with Zero net price
ls_po_items_add_data-po_item = ls_po_items-po_item.
ls_po_items_add_data-ir_ind = space.
ls_po_items_add_data-gr_ind = 'X'.
ls_po_items_add_data-gr_non_val = 'X'.
APPEND ls_po_items_add_data TO po_items_add_data.
ENDLOOP.
<b>Related link -></b>
Re: Final Entry/ Final Invoice Indicator to be checked Auotmatically
<u>Do let me know.</u>
Regards
- Atul -
AET Generated field values are not saved.
Hi Gurus,
I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
While debugging I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
Please advice me the soution for the same.
Regards,
Anandthere should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
If not, you can implement that method with below code.
DATA: lv_collection TYPE REF TO if_bol_bo_col,
entity TYPE REF TO cl_crm_bol_entity.
* get collection of dependent nodes
entity ?= focus_bo.
TRY.
lv_collection = entity->get_related_entities(
iv_relation_name = 'BTHeaderCustExt' ).
IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
IF entity->is_changeable( ) = ABAP_TRUE.
TRY.
entity = entity->create_related_entity(
iv_relation_name = 'BTHeaderCustExt' ).
CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
* should never happen
ENDTRY.
IF entity IS BOUND.
CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
lv_collection->add( entity ).
ENDIF.
ENDIF.
ENDIF.
CATCH cx_crm_genil_model_error.
* should never happen
EXIT.
CATCH cx_sy_ref_is_initial.
ENDTRY.
me->set_collection( lv_collection ). -
When I take photos now with my ipad 3 the photos do not go to the photostream folder...they go to the camera roll so they are not transferring to my pc although they were up till today. How can I fix this?
I went there and the problem might be because of low battery power..I am charging my ipad now and will let you know if that has helped...Thanks for the link..
-
Call on PRI Line are not transfered to IP-AA on CCM
Greetings,
Having an issue with H.323 Voice gateway. Incoming calls are not transferred to Auto-Attendant. This happens randomly but I have noticed that the frequency is higher when there are no incoming call no PRI lines.
(Check the attachments for debugs)
The calls seems to be answered by gateway but ISDN-Connect message is never displayed. I tried to call from my IP Phone to but no ISDN-Connect message for this call, however, the call is landed on gateway. Running CCM 4.2(3), IPCC Express 4.0(4),IOS version 12.4(8) Advance IP Services, tried IOS 12.4(5a) Advance Enterprise Services as well but in vain.
Another questions is that: we can run both MGCP and H.323 on voice gateway but how will it register with CallManager. I guess we can use some loopback technique for this purpose. Need suggestions/comments!!!
Please find the attachments of Q921 and Q931 debugs. Took debugs for 2-scenarios
1- Called from and outside number to PRI line
2- Called from IP-phone to PRI line
Regards,
Syed Khalid AliYou can refer this guide for more information on configuring loopback for PRI interface:
http://www.cisco.com/en/US/docs/ios/12_2/dial/configuration/guide/dafchant.html#wp1002838 -
Files Are Not Transferring Correctly from Captivate 4 to 5
My files from Captivate 4 are not transferring correctly into Captivate 5. The images and quiz questions are not in the same place. Help!
This is a bug.
We all have it.
Keep CP4 for the old courses, and develop new ones in CP5. That is what I am doing.
Alternative is to manually adjust everything (don't even get me started on rollovers...)
Terry -
Changes to order are not transferred
Hi,
our PPDS users are facing an issue in Product Planning Table ( transaction /sapapo/ppt1).
When we create a planned order and convert to production orders, the system converts with out any issues.
After some time when we drag the production order to a new time ( in DS board), fix the order, then when we save, we get the message " Changes to order 100065265 are not transferred" and the order moves back to where it was... The # 100065265 is our production order in created status.
Looking at the error details, I thought there are some changes to the order being done in R/3, but there were no changes to that order in R/3 at that point and the same change, if done after some time goes through...
This is happening almost for every order and it's annoying to keep click ok on this order, wait and then reprocess again...some time we get the error multiple time before the system accepts the changes...
Any idea on what might be happening?
More details about the error,
===
Changes to order 100065265 are not transferred
Message no. /sapapo/cdpssimulati015
Diagnosis:
The changes made to the order 100065265 in SAP APO can not be transferred as the order has already been changed by the linked R/3 system
System Response:
If you have made minor changes to an order in SAP APO and changes to this order are simultaneously being transferred from the R/3 system, only the changes from the R/3 system are adopted. The changes you made to the order manually in SAP APO are lost
In technical information, I see the application area as /SAPAPO/SIMULATI, MESSAGE # 015 and main program SAPLSHL2.
Thanks,KHi,
It seems the production order details are getting updated in ECC with order related settings you maintained at ECC, like settlement profile, etc., During that time, if you try to change the production order in APO, since the ECC update for the order is not yet completed, it gives the error. Thats why after sometime, when you change the production order, it allows you to change.
Please try this, once you convert the order in APO, go to ECC and try to open the order in CO02 or CO03, it will give you an error the order is already being processed by XXXX. If so, then it is the time taking to update the production order in ECC.
Also, try this, once you convert the order, immediately save and after sometime you change the time.
Please check and revert.
Regards,
Manimaran M. -
SRM PO Changes are not transferred to Back end
Hi All,
I have a problem in PO changes.
We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes.
Recently we have upgraded to ECC 6.0. Now the changes are not transferable.
Could any one help me to fix this issue and please give the steps that i need to check for fixing it.
Regards
Pratap JHi Thaigo,
Thanks for your input. please go through the below.
These are the table entries in BBP_BACKEND_DEST
Client Logical system Destination System type RFC possible Local FI validation
500 EP1CLNT500 EP1CLNT500 EBP_5.0 X 0
500 RP1CLN500D RP1CLNT500DIAG R/3_4.70 X 0
500 RP1CLNT500 RP1CLNT500 R/3_4.70 X 0
In the table, it was still 4.70. So it needs to changed to ERP_4.0 ?
Regards
Pratap J -
TS3989 Some of my pictuers on iPhone are not transferring to my ipad
Some of my pictuers on iPhone are not transferring to my ipad
UM Go Blue wrote:
Until today, all of my music was on both my Mac and iPad 2. I too just sync'd my iPad 2 with my Mac. Originally, none of the music from the Mac showed up on iPad. Tried again, and now some albums are showing up, but only a few. Have plenty of capacity/space. Also noticed the "iPod" icon is now a "Music" icon on the iPad. Any ideas?
Sounds like you just updated your IOS. Check the iTunes settings and confirm that nothing was changed: -
Cannot update delivery attributes: the following field(s) are not updatable
Hi. I create in EBS simple Order
Now , my goal is to create a delivery , pick , change shipping quantity and ship confirm. Here is my code
DECLARE
p_sales_order NUMBER := 10014445;
p_line_number NUMBER := 1.1;
p_org_id NUMBER := 308;
l_shipped_quantity NUMBER := 5;
p_api_version_number NUMBER := 1.0;
init_msg_list VARCHAR2(200);
l_commit VARCHAR2(30);
x_msg_details VARCHAR2(3000);
x_msg_summary VARCHAR2(3000);
x_return_status VARCHAR2(3);
x_msg_count NUMBER;
x_msg_data VARCHAR2(3000);
p_validation_level NUMBER;
v_errbuf VARCHAR2(2000);
v_retcode VARCHAR2(20);
v_released_status wsh_delivery_details.released_status%TYPE;
v_inv_interfaced_flag wsh_delivery_details.inv_interfaced_flag%TYPE;
v_oe_interfaced_flag wsh_delivery_details.oe_interfaced_flag%TYPE;
v_source_code wsh_delivery_details.source_code%TYPE;
v_pending_interface_flag wsh_trip_stops.pending_interface_flag%TYPE;
l_changed_attributes wsh_delivery_details_pub.changedattributetabtype;
l_source_code VARCHAR2(30) := 'OE';
-- Parameters for WSH_DELIVERIES_PUB
p_delivery_name VARCHAR2(30);
p_action_code VARCHAR2(15);
p_asg_trip_id NUMBER;
p_asg_trip_name VARCHAR2(30);
p_asg_pickup_stop_id NUMBER;
p_asg_pickup_loc_id NUMBER;
p_asg_pickup_loc_code VARCHAR2(30);
p_asg_pickup_arr_date DATE;
p_asg_pickup_dep_date DATE;
p_asg_dropoff_stop_id NUMBER;
p_asg_dropoff_loc_id NUMBER;
p_asg_dropoff_loc_code VARCHAR2(30);
p_asg_dropoff_arr_date DATE;
p_asg_dropoff_dep_date DATE;
p_sc_action_flag VARCHAR2(10);
p_sc_intransit_flag VARCHAR2(10);
p_sc_close_trip_flag VARCHAR2(10);
p_sc_create_bol_flag VARCHAR2(10);
p_sc_stage_del_flag VARCHAR2(10);
p_sc_trip_ship_method VARCHAR2(30);
p_sc_actual_dep_date VARCHAR2(30);
p_sc_report_set_id NUMBER;
p_sc_report_set_name VARCHAR2(60);
p_sc_defer_interface_flag VARCHAR2(60);
p_sc_send_945_flag VARCHAR2(60);
p_sc_rule_id NUMBER;
p_sc_rule_name VARCHAR2(60);
p_wv_override_flag VARCHAR2(10);
p_asg_pickup_stop_seq NUMBER;
p_asg_dropoff_stop_seq NUMBER;
x_trip_id VARCHAR2(30);
x_trip_name VARCHAR2(30);
fail_api EXCEPTION;
x_debug_file VARCHAR2(100);
l_ship_method_code VARCHAR2(100);
l_user_id NUMBER;
l_resp_id NUMBER;
l_appl_id NUMBER;
CURSOR c_ord_details IS
SELECT DISTINCT det.source_header_number sales_order,
det.org_id,
det.source_line_number,
det.source_header_id,
det.source_line_id,
det.source_header_type_name,
det.inventory_item_id,
det.requested_quantity,
det.delivery_detail_id,
(SELECT concatenated_segments
FROM mtl_system_items_kfv
WHERE inventory_item_id = det.inventory_item_id
AND organization_id = det.organization_id) ordered_item,
det.organization_id,
det.src_requested_quantity,
det.shipped_quantity,
del.delivery_id,
del.status_code delivery_status_code,
det.released_status pick_release_status,
det.oe_interfaced_flag,
det.inv_interfaced_flag
FROM wsh_delivery_details det,
wsh_delivery_assignments asn,
wsh_new_deliveries del
WHERE 1 = 1
AND det.delivery_detail_id = asn.delivery_detail_id
AND asn.delivery_id = del.delivery_id(+)
AND det.source_header_number = 1199656
AND det.source_line_number = '1.1'
AND det.org_id = 10102
AND shipped_quantity IS NULL
AND NVL(del.status_code, 'OP') <> 'CL'
and det.delivery_detail_id =21439836
/* AND det.released_status = 'Y'*/;
BEGIN
-- Initializing the Applications
SELECT user_id INTO l_user_id FROM fnd_user WHERE user_name = 'MSHAPIRA';
SELECT responsibility_id, application_id
INTO l_resp_id, l_appl_id
FROM fnd_responsibility_vl
WHERE responsibility_name = 'OM Super User - UDS UK';
fnd_global.apps_initialize(l_user_id, l_resp_id, l_appl_id);
FOR i IN c_ord_details LOOP
DBMS_OUTPUT.put_line('Initializing the Application for Shipping Transactions');
-- Mandatory initialization for R12
mo_global.set_policy_context('S', i.org_id);
mo_global.init;
-- Ship Confirming
p_delivery_name := TO_CHAR(i.delivery_id);
DBMS_OUTPUT.put_line('Before Shipping, Calling WSH_DELIVERY_DETAILS_PUB API to Update Shipping Attributes');
DBMS_OUTPUT.put_line('=============================================');
l_changed_attributes(1).delivery_detail_id := i.delivery_detail_id;
l_changed_attributes(1).shipped_quantity := 5;
wsh_delivery_details_pub.update_shipping_attributes(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
p_commit => l_commit,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_changed_attributes => l_changed_attributes,
p_source_code => l_source_code);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
RAISE fail_api;
DBMS_OUTPUT.put_line('Failed to Update the Shipping Attributes');
ELSE
DBMS_OUTPUT.put_line('Successfully Updated the Shipping Attributes');
END IF;
BEGIN
SELECT shipping_method_code
INTO l_ship_method_code
FROM oe_order_headers_all
WHERE order_number = i.sales_order
AND org_id = i.org_id;
EXCEPTION
WHEN OTHERS THEN
l_ship_method_code := NULL;
END;
p_action_code := 'CONFIRM'; -- The action code for ship confirm
p_sc_action_flag := 'S'; -- Ship entered quantity.
p_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
p_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
p_sc_trip_ship_method := l_ship_method_code; -- The ship method code
p_sc_defer_interface_flag := 'Y';
p_sc_stage_del_flag := 'Y';
p_sc_create_bol_flag := 'N';
p_wv_override_flag := 'N';
-- API Call for Ship Confirmation
DBMS_OUTPUT.put_line('Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
DBMS_OUTPUT.put_line('=============================================');
wsh_deliveries_pub.delivery_action(p_api_version_number => 1.0,
p_init_msg_list => init_msg_list,
x_return_status => x_return_status,
x_msg_count => x_msg_count,
x_msg_data => x_msg_data,
p_action_code => p_action_code,
p_delivery_id => i.delivery_id,
p_delivery_name => p_delivery_name,
p_asg_trip_id => p_asg_trip_id,
p_asg_trip_name => p_asg_trip_name,
p_asg_pickup_stop_id => p_asg_pickup_stop_id,
p_asg_pickup_loc_id => p_asg_pickup_loc_id,
p_asg_pickup_stop_seq => p_asg_pickup_stop_seq,
p_asg_pickup_loc_code => p_asg_pickup_loc_code,
p_asg_pickup_arr_date => p_asg_pickup_arr_date,
p_asg_pickup_dep_date => p_asg_pickup_dep_date,
p_asg_dropoff_stop_id => p_asg_dropoff_stop_id,
p_asg_dropoff_loc_id => p_asg_dropoff_loc_id,
p_asg_dropoff_stop_seq => p_asg_dropoff_stop_seq,
p_asg_dropoff_loc_code => p_asg_dropoff_loc_code,
p_asg_dropoff_arr_date => p_asg_dropoff_arr_date,
p_asg_dropoff_dep_date => p_asg_dropoff_dep_date,
p_sc_action_flag => p_sc_action_flag,
p_sc_intransit_flag => p_sc_intransit_flag,
p_sc_close_trip_flag => p_sc_close_trip_flag,
p_sc_create_bol_flag => p_sc_create_bol_flag,
p_sc_stage_del_flag => p_sc_stage_del_flag,
p_sc_trip_ship_method => p_sc_trip_ship_method,
p_sc_actual_dep_date => p_sc_actual_dep_date,
p_sc_report_set_id => p_sc_report_set_id,
p_sc_report_set_name => p_sc_report_set_name,
p_sc_defer_interface_flag => p_sc_defer_interface_flag,
p_sc_send_945_flag => p_sc_send_945_flag,
p_sc_rule_id => p_sc_rule_id,
p_sc_rule_name => p_sc_rule_name,
p_wv_override_flag => p_wv_override_flag,
x_trip_id => x_trip_id,
x_trip_name => x_trip_name);
IF (x_return_status <> wsh_util_core.g_ret_sts_success) THEN
DBMS_OUTPUT.put_line('Ship confirm has not been Completed For SO => ');
ROLLBACK;
RAISE fail_api;
ELSE
DBMS_OUTPUT.put_line('Ship confirm Successfully Completed For SO => ');
COMMIT;
DBMS_OUTPUT.put_line('Checking the Delivery Status after delivery action API Call');
DBMS_OUTPUT.put_line('==========================================');
SELECT wdd.source_code,
wdd.released_status,
wdd.inv_interfaced_flag,
wdd.oe_interfaced_flag,
wts.pending_interface_flag
INTO v_source_code,
v_released_status,
v_inv_interfaced_flag,
v_oe_interfaced_flag,
v_pending_interface_flag
FROM wsh_trips wtr,
wsh_trip_stops wts,
wsh_delivery_legs wlg,
wsh_new_deliveries wnd,
wsh_delivery_assignments wda,
wsh_delivery_details wdd
WHERE wtr.trip_id = wts.trip_id
AND wts.stop_id = wlg.pick_up_stop_id
AND wts.pending_interface_flag = 'Y'
AND wdd.inv_interfaced_flag <> 'Y'
AND wlg.delivery_id = wnd.delivery_id
AND wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id = wdd.delivery_detail_id
AND wnd.delivery_id = p_delivery_name
AND wdd.source_line_id = i.source_line_id;
IF (v_source_code = 'OE' AND v_released_status = 'C' AND
v_inv_interfaced_flag <> 'Y' AND v_oe_interfaced_flag <> 'Y' AND
v_pending_interface_flag = 'Y') THEN
DBMS_OUTPUT.put_line('The Delivery has been Shipped & the Next Step is - Run Interface');
DBMS_OUTPUT.put_line('===========================================');
-- API Call for Submitting Interface Trip Stop
wsh_ship_confirm_actions.interface_all_wrp(errbuf => v_errbuf,
retcode => v_retcode,
p_mode => 'ALL',
p_stop_id => NULL,
p_delivery_id => p_delivery_name,
p_log_level => 0,
p_batch_id => NULL,
p_trip_type => NULL,
p_organization_id => i.organization_id,
p_num_requests => 1,
p_stops_per_batch => 1);
ELSE
DBMS_OUTPUT.put_line('The Delivery has not Shipped Properly');
END IF;
END IF;
END LOOP;
EXCEPTION
WHEN fail_api THEN
DBMS_OUTPUT.put_line('==============');
DBMS_OUTPUT.put_line('Error Details If Any');
DBMS_OUTPUT.put_line('==============');
wsh_util_core.get_messages(p_init_msg_list => 'Y',
x_summary => x_msg_summary,
x_details => x_msg_details,
x_count => x_msg_count);
IF x_msg_count > 1 THEN
x_msg_data := x_msg_summary ||' '||x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
ELSE
x_msg_data := x_msg_summary||' '|| x_msg_details;
DBMS_OUTPUT.put_line(x_msg_data);
END IF;
END;
But at the stage of updating delivery attributes I get the following error message
Warning: For Delivery Detail 21439836, the following field(s) are not updatable: SHIPPED_QUANTITY.
Why?Hi Paul
Looks like the authorisation is failing due to a bad registration for some reason.
Would you be kind enough to clear out the registration to ensure we are dealing with a fresh start and no information is being used which may have become corrupt. You may do this by following this procedure;
Remove existing reg details
# usr/lib/cc-ccr/bin/eraseCCRRepository
List /tmp/RegistrationProfile.properties file
# cat /tmp/RegistrationProfile.properties
Attempt re-registration
# sconadm register -a -r /tmp/RegistrationProfile.properties
Send us the full output of the commands above if you would please.
Maybe you are looking for
-
How would I stop full charge alerts on my iPhone 6 with iOS 8.1.1
Nightly when charging my phone it continuesly alerts me it has reached a full charge until it is unplugged. How can I stop this alert?
-
Reg : internal table & Perform statement
hi all i have 3 internal tables , * in first internal table i have mark-1 ,* * in 2nd internal table i have mark-2 ,* * using "PERFORM" i have to add mark 1 & mark 2* * and i need to display the total in 3rd internal table.* *
-
HT4759 i cant get my iphone to sinc with my husbands Iphone or my laptop???
When using shared calendars, I cant get my iphone to sync with my laptop icloud calendar or the calendar my husband and I use on our Iphones.
-
How do you find duplicates in iTunes 11?
I lost a bunch of songs trying to upload to Skydrive and when I copied my library bak it has tons of duplicates... can find the old button "FIND DUPLICATES" any more in iTunes 11... anyone knows an easy way to delet so many duplicates if I cannot fru
-
Timed out when I try to search a topic after recent update
enter topic in search box, get timed out 100%