ALE for CATS Timesheet

Hi everyone:
I am using ECC6.0 for HR and 4.6C for FICO. I need to transfer my CATS timesheet data from HR to Controlling.
I would like to know if anyone has experience with transferring CATS data to CO and if yes, which ALE/BAPI you use etc.
Any further information is greatly appreciated and I'll definitely reward points
Thank you,
Ash

this is available through a variety of third parties as part of a toolkit and may now also be one of the scenarios available via Project Gateway.
Clinton

Similar Messages

ADOBE Interactive form for CATS Timesheet

Hi All,
Has SAP given any standard interactive form where you can fill your CATS timesheet?
There was a thead started long back on the same and got really inquisitive if we can have this facility. If yes .. is it already released? .
Standard Adobe Timesheet/ CATS Form
Regards,
Akshay..

this is available through a variety of third parties as part of a toolkit and may now also be one of the scenarios available via Project Gateway.
Clinton

Is there any Android Application available for updating CATS Timesheet?

Is there any Android Application available for updating CATS Timesheet?
We need to enable to worldwide associates to clock the time from the cell phone. In case you have any suggestion please comment.

None that I know of.
It's more impressive and useful if you write an app and get it published in the App Store.
That way you can show you aren't just a 'paper MCSD'.

ESS CATS Timesheet

Hi,
I want to display the planned hours in the working hours row in CATS timesheet in portal implemented as CATS Regular.
Is there any configuration change needed for that in the CATS profile or I need to use an user-exit. If a user-exit is needed, please let me know which one.
Thanks a lot for your help.
Kumar

Hi Bala,
Thanks for the tip. The exporting parameter ta_timesheetdata has the timesheet data and when I enhanced the FM HRXSS_CAT_WD_RECORD, I was able to get the working hours to display in the planned hours. But the problem is, I got the working hours data from WS in IT0007 which is not giving the correct output.
I want some way in which I can link the PERNR to Personnel subgrouping and Daily Work Schedule. I could find them in T550A but i couldn't figure out a way to link them to PERNR.
And one more thing is I want some FM where if I give the holiday/factory calender ID, then it should return me the dates which are holidays in a given date range. The reason being those days should display 0 as working hours.
So Any ideas???
Thanks,
Kumar

ESS Cats Timesheet Performance Considerations

Hi Experts,
We are using ESS Standard Portal Cats timesheet.
But the client is not happy with way the Timesheet performs
Like for example to fill up time in one of the cell - when the user places the cursor it takes 3-4 secs for the entire row to get selected ( orange in color ) . Once selected the user can fill that cell.
Our users timesheet runs from 20-30 lines so u can imagine how painful its for a user to complete booking his time.
The row selections is one of the major pain points in our timesheet.
Can we do any thing about the slow performance of our timesheet?. I mean something from the design perpective of Java Webdynpro.
We are also open to develop something in custom. But we would still end up developing a java wd application. Would it be worth the effort considering the standard timesheet is also in java wd/
All your thoughts/experiences would be appreciated.
Thanks alot

Hi,
Maybe is more a Basis problem, Talk with the basis guys and check this [Link...|http://www.sdn.sap.com/irj/scn/shop?rid=/media/uuid/90eea55f-a10a-2a10-fca3-b9e42239c7c3]
Jose
Regards.

Throw a custom error message while doing CATS timesheet approval

Hi,
We are going to implement CATS Timesheet approval using ESS / MSS portal.
Requirement is NOT to allow an approver to approve / reject a timesheet workitem in MSS duing payroll block period ( e.g last week of a month). we need to throw an error message saying 'No approval of timesheet is allowed during payroll block period'.
Will SAP enhancement CATS0006 (EXIT_SAPLCATS_006) be useful for this?
Any other customer exit / Badi will help.
Regards,
Bijay

Hi,
yes you can use the mentioned CATS enhancement to throw the error message.
Check the link :-
http://help.sap.com/erp2005_ehp_05/helpdata/EN/bd/53fa2fcc43594dbf9f406c18989a47/frameset.htm
Thanks & Regards, Swapnil Mishra

Mass approval of CATS Timesheets

Currently CATS timesheets show up on the UWL and users click on the timesheets individually that opens up the screen RCATS_APPROVE_ACTIVITIES in transaction CATSW and the users either Approves or Reject it. Now they want some way of mass approval of timesheets to show multiple records in one screen. What are my options to do that? I am kind of novice in UWL and workflow so please elaborate on things if necessary

Hello,
Starting from ERP2005, new and improved standard tasks have been provided for Cross Application Timesheet.
Before this release, workitems were created for each employee. Approver had to click on each workitem in order to approve records , which was time consuming. With ERP2005, the approver gets at the maximum only one workitem which contains CATS records for all the employees sorted according to personnel numbers. So the approver has only one workitem to work with which makes Approval more easier and saves him lot of time.
To achieve this new functionality you have to make use of new Standard tasks TS31000004, TS31000006, TS31000007. The old tasks will still work in ERP2005 but it may yield some un-desirable results. Hence it is highly recommended to use the new tasks.
Best Regards,
Deepak.

WF task for CATS approval

Hi ,
I am pursuing on tthisquestion in BPM, but thought HCM users might also guid eme a bit.
What is the workflow task or item that should ideally be used for CATS profile for approvals.
I am using using TS20000460. Not sure if this is the right one as even after approving the task sarys in the managers inbox in status "processing" hwne it should actually have been compelted and deleted from the managers inbox.
please guide

Actually ew did a workflow trace and saw that WF-BATCH user was locked

COPA ANALYSIS-CATA(TIMESHEET) POSTING TO COPA

Dear all Gurus out there,
could you please help by telling me how the timesheet cost flows to KE30? I am 1st Level support in my country and being questioned why the total cost in Cost Center Accounting is higher than the opex in KE30.I understand that billable cost will either flow to Pre sales cost or WIP cost but how about those non billable cost? The total non billable cost in CATA (Timesheet) is greater than the opex cost in KE30.
I have no idea how to answer this and looking source to help.Please.

Hi,
Please check if there are any costs from WBS to be settled to CO-PA. Generally in case of WBS and MTO scenarios you need to settle the cost to CO-PA.
Regards,
Abhisek

Logical database for CATS

Hi
Anyone who know which database to use for CATS?
Thanks // Peter B

Hi Peter,
Data entered through Cross application time sheet applications is stored in the CATSDB. Check se11 and database table CATSDB (CATS: Database Table for Time Sheet), you can see different fields / data elements with in the CATS database.
Regards,
Vamshi.

Trigger WF for cats approval

Hi ,
I am trying to trigger a work flow for CATS times through CAT2 transaction. Once i save the cat times and when i go to transaction SWI1, i can see the workfloe item triggered and in status ready. How does it get into status started and if I want to get in to started status immediately for the purpose of demo wothout any time gap, how can i do this.
Appreciate any guidance on the same.
regards
raj

resolved

CATs timesheet - Network confirmations

We book time spent on a project through CATs timesheet. Once we book in the hrs in an HR client it gets transfered through IDOCs to the project residing in another client. the transfer creates a network confirmation document. Now due to some reason if there is a requirement to modify the time posted we have to delete the entire confirmation document and repost balance hrs to the project. I know that it is not possible to post -ve hrs in CATs. Also it is very difficult to correlate the time booked to its confirmation document, Is there a way out?

Normally, you can go back into the timesheet and cancel/delete the hours posted to the project and the cancellation is posted to the project automatically. You can then book the hours to a different project/NWA and transfer to PS (CAT5). Looks at this link: http://help.sap.com/saphelp_erp60_sp/helpdata/en/64/400b2b470211d189720000e8322d00/frameset.htm
You will need to make sure your data entry profile allows changing approved hours. However, I honestly don't know how the process works with IDocs.

Replacement for Cat 6500

Hi all
Is there a replacement for Cat 6500
Thanks

Hi ,
You can use DFC4XL . XL means , it has more memory and store more TCAM table .
What is the difference between DFC4 and DFC4XL?
A. DFC4XL offers more scalability in terms of IPv4/IPv6 FIB entries, ACL entries, and NetFlow entries compared with DFC4 (see Table 3). Other than those hardware scalability differences, there are no feature differences between DFC4 and DFC4XL.
Table 3. Feature Differences Between DFC4 and DFC4XL
Feature
DFC4
DFC4XL
IPv4 unicast/MPLS forwarding entries
256K
1024K
IPv6 unicast/IPV4 multicast forwarding entries
128K
512K
NetFlow entries
512K
1024K
ACL and QoS TCAM size
64K
256K
1K = 1024.
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/qa_c67-362061.html
HTH
Regards,
VS.Suresh.
*Plz rate the usefull posts *

ALE for G/L and Cost Center Master Data

Dear Expert,
I am a fresher in ALE and want to distribute G/L and Cost Center Master Data from our production system to Development and Q/A system. Can you give some guidances? and how to configure ALE for this purpose?
Regards,
MAL

hi,
steps to configure ALE :
1.first u hav to create 2 logical systems for ur 2 clients in BD54.
2.then assign thm in SCC4 for both clients.
3.thn crete rfc destination in SM59.create in client from which u want to send only.
4.create port in WE21 for sender.
5.create partner profiles in We20 for both clients,outbound for sender and inbound for reciever.
6.now create distribution model in BD64.
generate partner profiles and distribute.
now ur ale configration to send data frm 1 clnt to other is ready.
u hav diff methods like master data,change pointers,idoc extensions,idoc reductions,...... to send data .
hope this helps.
reward points if helpful.

Is it Compulsory to have ESS for CATS

Hi Seniors,
Do i need to have ESS in place to go for CATS.
My client doesn't want ESS right now,but at the same time they want to regulate the time allocation to employees on different projects.
The management & HR want to have the access to allocate/distribute time as per the projects work & the billing has to be done accordingly to that.
Is it possible to have CATS

I think employees can do the time entry using CAT2 and their respective data entry profile. Ofcourse the rest of configuration should be in place with respect to entry profiles, fields for selection etc. The appropriate profile should be entered for CVR parameter.

ALE for CATS Timesheet

Similar Messages

Maybe you are looking for