ALE for G/L and Cost Center Master Data

Dear Expert,
I am a fresher in ALE  and want to distribute G/L and Cost Center Master Data from our production system to Development and Q/A system. Can you give some guidances? and how to configure ALE for this purpose?
Regards,
MAL

hi,
steps to configure ALE :
1.first u hav to create 2 logical systems for ur 2 clients in BD54.
2.then assign thm in SCC4 for both clients.
3.thn crete rfc destination in SM59.create in client from which u want to send only.
4.create port in WE21 for sender.
5.create partner profiles in We20 for both clients,outbound for sender and inbound for reciever.
6.now create distribution model in BD64.
generate partner profiles and distribute.
now ur ale configration to send data frm 1 clnt to other is ready.
u hav diff methods like master data,change pointers,idoc extensions,idoc reductions,...... to send data .
hope this helps.
reward points if helpful.

Similar Messages

  • Profit center and cost center master data upload errors

    Hi Sapiens,
    Could you please guide me to resolve the below errors in profit center and cost cost center master data upload through LSMW. i am usinng recording method for upload and  getting below error while uploading the data from txt file.
    1. Valid from and to dates are not converting in DDMMYYYY format, which field type we have to use in field mapping?
    2. some of the fields data are overlapping when uploading the data.
    3. How to create validation for empty cells data.
    thank in advance.
    regards,
    jagadeesh.

    Hi
    when you are using LSMW for uploading PC & CC, simple way to correct the Error's WHILE RECORDING The First record, while Creating LSMW, B very care full while entering the details ,bez wht ever Fields your updating ..the same Fields get updated While LSMW Processed.
    As mentioned above update the vaild from and to date in wht ever format you want While recording, in the same format all the remaining records gets updated.. 
    Hope the suggections will Help you in solving your Issues.
    Thanks
    Goutam
    Edited by: Goutam78 on Apr 29, 2011 8:59 PM

  • Company code field in cost center master data

    I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

    Hi MG,
    Appearance of the field "Company Code" in cost center master data depends on the following point...
    In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
    If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
    I hope u got it...
    Srikanth Munnaluri

  • Co code not seen for cost center master data creation in OKEON

    hI:
               In org tab of Cost center master data creation while configuring cost center hierarchy in OKEON i can not see organization tab. I have checked in OKKP Co area is assigned to co code but still the issue persist.
    Br

    hi
    you mean the tab is not displayed? strange, it seems that there should be a screen layout to control the ui, or any transaction variant is recorded. I tried in my side, the tab is there.
    @ Murali, you are right, but in that tab, not only company code can be configured, but also business area, functional area etc.
    best regards, Lawrence

  • Field Status for cost center master data!

    Hi friends,
    can anyone please tell me,
    Where do we define, which field is mandatory in cost center master data
    regards

    Good afternoon Rohan,
    To do that :
    IMG or transaction KM1V.
    Create a variante with attributes.
    You can also define time based fields in transaction OKEG
    Valérie
    Message was edited by: valerie secondy

  • Problem while changing Business Area in Cost Center Master Data

    I am having a problem while changing the Business area in cost center master data, the system does not allow to change the business area due to the following reasons;
    1.  The transactional data already exists for that cost center
    2.  The desired date required to be changed, falls between analysis period 01.01.2000 to 31.12.2999
    Can anyone help me in order to reslove this issue
    Thanking in anticipation
    Edited by: Arshad  Iqbal on May 24, 2010 2:10 PM

    Dear Dejan !!
    Thanks a lot for resolving my problem actaully i have tested the scenario in Testing Server by changing the fiscal year and the system allowed to change the business area before any transactional data posted.
    Thanks Once Again
    Regards
    Ch. Arshad Iqbal

  • Use of Costing Sheet in Cost Center Master Data

    In the ‘Template’ tab of the cost center master data there is a provision to mention ‘Costing Sheet’ under the heading ‘Overhead rates’.
    How does it work? Does it work for actual or plan?
    I want to use  ACTUAL assessment cycle between a sender cost center and few receiver cost centers. I want to add % overheads to the expenses posted on receiver cost centers. Can I  do this by mentioning a costing sheet  in ther sender / receiver cost center?
    If yes then how? If not what is the alternative?
    Regards,
    VRB

    Hi,
    Refer this link:
    http://help.sap.com/saphelp_470/helpdata/en/7e/cb815e43a311d189ee0000e81ddfac/frameset.htm
    Reward points if useful.
    Regards

  • Change Tax Jurisdiction code (TXJCD) in Cost Center Master Data

    Hi There,
    We have a problem of making change to Tax Jurisdiction Code in Cost Center Master Data. We are on ECC 6.0 with Vertex system as external tax system. When we create Cost center, system automatically derive tax jurisdiction code from vertex) external system).  Now Vertex have made changes to Tax Jurisdiction Code for same place based on US Gov directive. these changes are time period base say from 01/01/2008 to 06/30/2009 Tax Jurisdiction Code  "TX1000" and from 07/01/2009 to 12/31/999 Tax Jurisdiction Code  "TX2000" (example)  When we go to change mode in Cost Center, system automatically derive the new Tax Jurisdiction Code  and update the cost center with new Tax Jurisdiction Code  "TX2000". When we book invoice for cost center, with back date say 06/29/2009, system through the error, that it is not a valid Tax Jurisdiction Code.
    My question is; how can we maintain two different Tax Jurisdiction Code  in SAP for Cost Center? From configuration stand point of view, we have maintained TXJCD as time dependent field, but still this field is grayed out and sytem populate the Tax Jurisdiction Code  from external system, since we have installed vertex system for tax purpose.
    Please let me know.
    Thanks,
    Pawan Sharma

    Pawan,
    have you received any response on this or identified any solutions as I have also a similar request.
    Thanks,

  • Company Code field now shown in Cost Center Master Data

    Hi
    I am new, I configured CCA. Created Controlling area and versions. When I created a cost center company code field not shown. I think one cost center assined to a one company code but in cost center master data Company code field not shown. I want to cost center company code specific. I using ECC6
    Pl help.

    Hi,
    When you will assign additional company codes, the cost centre created now, by default will be assigned to the existing company code, and for the new one - you will have to define cost centres again. So, everything is fine, do not worry.
    Regards,
    Eli

  • Profit Center Mandatory in Cost Center Master Data

    Hi guys,
    Can any one suggest,where can we make settings for profit center mandatory in the cost center master data?

    Hi Swapvik,
                    I was just surfing and came across the concept for the profit centre.Have a look at it , it might help you or even resolve the issue.
    Here is the Link: [Centre1|Re: Gl account is set to profit center mandatory;
    There is another link for configuration problem relating to the query.
    Link: [Centre2|Profit Center Column;
    I am sure this will resolve your query.
    Have a best day ahead.

  • Defination of Department to assign in Cost Center Master Data

    Hi Experts,
       Can you anyone please suggest me reg, "Defination of Department to assign in Cost Center Master Data".
    because, My client needs Department wise Cost Centers balance.
    Pls explain in detail..
    Thanks in advance..
    Regards,
    Balaji Bhonsle

    In my (4.7) version there is a field for "Department".  This field is nothing more than a text field.  You can populate it with whatever you wish and use that field in a variety of reports.  One use would be to enter the legacy department number when going live.  Another would be to group several cost centers in some desired way.  However, if you are looking to group cost centers, the cost center grouping as previously suggested is a far superior choice normally since you can create many different groups whereas this field is limited to just one choice.  Another grouping available for reports is the Category, which is a one letter designation.  Be careful with this though, because it may be used to drive functionality as well.  Like P in my category implementation means "Production" and thus allows labor activities as a feature.
    I hope this helps.

  • Cost center Master data

    Hi All
    I would like to change cost center master data valied from date and to date for more than 1000 cost centers. Please let me know what is the easy way to do this.
    Thanks in advance
    Regards
    Prasad

    Hi,
    In Standard SAP we are not able to change the valid date.
    I believe you should do delete and create another cost center with the same parameters and with the new valid date.
    Or....create a programm with Abaper...but I am not sure if it will fix your issue.
    Thanks
    Daniel

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

  • Cost Center Master data field status change

    Hello Gurus,
    I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

    Dear,
    You can use screen variant also...
    Transaction code: SHD0
    and make that field as required.

  • How to make the Profit Center Field Mandatory in Cost center Master Data

    Dear All,
    Please let me know how to make the Profit Center Field mandatory in Cost Center Master Data as well as my Internal Order Master Data?
    Thanks in advance!
    Regards,
    Rajeswari Shankar.

    Hi Rajeswari,
    You can modify message number KS096 to "Error" via OBA5. Thus, the users would no be able to save a cost center without entering a profit center. (Depending on your release you can make KS096 modifiable by implementing note 486781.) 
    Concerning the internal orders (transaction KO01), you can run KOT2 and set Profit center field as required entry in "change field selection" section.
    Regards,
    Greta

Maybe you are looking for