ALE/iDoc for Work Center data transfer

Hello, community.
I am working on several interfaces for the PP and PM modules using iDocs/ALE.
One of the requirements is that only created and modified data must be distributed from R/3.
For Work Centers, we are using basic type LOIWCS02 and message type LOIWCS. We are generating iDocs through transaction POIM, which has two transfer modes: Complete (data for all Work Centers etc.) and Change (only new and updated data).
The Change Transfer Mode assumes you have set both Change Pointers and Change Documents for the objects to be transfered. Otherwise, it'll work just like the Complete Transfer Mode.
Our PP consultant told me there is no configuration to generate Change Documents for Work Center data modifications.
Can anybody give me other opinions? I'll resort to Z-table solutions only if I have no other options.

Hi Danilo,
Do you know what the process codes are for
LOIWCS and LOIROU ?
Appreciate your help.
Thanks,
Gopi.

Similar Messages

  • Standard IDOC for WORK CENTER Master

    Hi,
    Please suggest the standard IDOC for work center master.
    I have tried PWKC.Got  DUMP when executed.
    Tried on SAP-Market place for help.Suggested not to use PWLC.
    Please suggest alternative.

    Will you please explain in a bit detail if LOIWCS01 or LOIWCS02 are transaction (as i tried to execute) or programs or please explain how to use these.(I executed from command prompt and SE38 but didnt helped)

  • Change log for work center data

    Hi,
    I was looking for the table where the change header document for the work center is stored.I was able to find a transation CR10 which shows the changes and also the database table CDHRD.
    When I am trying to view the changes that were made to the work center I find that the data does not exist in the tables.
      I was curious to know this as for some transaction the data is being logged in their respective change table but not for Work Center changes.
      Can anyone tell me as to why this is happening.
    What I think is that some changes to the configuration are required in order to log the changes in the database.
    Kindly help.
    Regards
    Varun

    Hi Wolfgang,
    Thanks for the information.
    However i have another question.
    The change table will have data only when it is activated in the configuration menu.
    However is there any other way by which we can capture the previous data for the work center e.g. the changed by field. I want that the names of the users who has changed the wrok center currently and the name of the person who previously made changes to it.
    See if you can help me on that.
    Regards
    Varun

  • ALE/IDOC for Data Migration of some master data

    Are ALE/IDOC available for data migration of the following master data:?
    1)General Tasklists in PM
    2)Equipment Tasklists in PM
    3)Single Cycle plans in PM
    4)Strategy plans in PM
    5)Equipments
    6)Functional locations
    7)Measuring points
    8)Work Centers
    9)Equipment BOMS
    10)QM Info Records
    11)Sampling procedure
    12)Certificate Profiles QM
    13)Inspection Plans
    14)Material master-QM View
    15)PP Recipes
    16)Equipment BOM
    If anyone has worked worked on ALE/IDOC for data migration, please guide

    Hi Dirk ,
    Thanks for your reply . Can we use matmas03 for loading. What will be the differences between these two IDOCS.

  • Bapi for change work center data

    HIi All
                    I need BAPI to change work center data for all categories and work center change transactions .....IR02 ,CNR2,CR02.
    Thanks in advance .

    Hai,
    Try the fm CRAP_WORKCENTER_CREATE
    BAPI_BUS2054_CHANGE_MULTI
    CRAP_WORKCENTER_CREATE
    Regards,
    Venkat

  • No work center data on 01.01.2013

    Dear Time Experts,
    During Time eval for one employee I got an error "No work center data on $01.01.2013".
    The person's DOJ is 28.01.2013
    Earlier faced similar issue and resolved by deleting B2 cluster and again running Time Eval fresh from DOJ.  But now same procedure not working.
    Refered below link but not able to delete B2 cluster as it shows person already accounted.
    Re: getting error in PT60
    "No Work Center Data on $01.01.2008"
    Cheers,
    Nayak

    Hi,
    I am also facing same error. Your issue resolved ? I deleted the B2 cluster but having same error. Can you please tell me the solution for this problem.
    Thanks
    Dev

  • VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

    I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
    As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
    Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
    we use System Center Virtual Machine Manager 2012 R2.
    Something is not ok with Update Rollup 3. Any suggestions?
    Boudewijn Plomp, BPMi Infrastructure & Security
    Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

    Hi
    SEE NEW BLOG:
    Support Tip Service Manager alert for the VSSNullProvider service after installing
    DPM 2012 R2 UR3
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.
    Thanks!
    Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

  • Tables for routing (for work center)

    hi friends,
    I am doing report on routing but i did not get value for work center i got tables CRHD CRCA CRCO CRHH CRHS CRTX KAKO KAZY .
    i try to get result by using link with PLPO and PLKO.
    in TCode CA03 when i see the technical attributes it stors the dat ain structure PLPOD but i am unable to use it.
    kindly can anybody tell me how to work center.
    thanks & regards
    Bhupinder Singh Kaler

    Hi Bhupi kaler,
    try to link CRHD and PLKO with WERKS ( Plant ) field ane get the ARBPL ( Work center ).
    Best regards,
    raam

  • Urgent: Creating ALE IDOC for SALES ORDER

    hi
    please tell me <b>step by step procedure to create ALE IDOC for SALES ORDER?</b>
    reward for sure
    regards
    ravish

    Hi,
         ALE IDOC
    Sending System(Outbound ALE Process)
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Create Model View
    Tcode BD82 ? Generate partner Profiles & Create Ports
    Tcode BD64 ? Distribute the Model view
    Message Type MATMAS
    Tcode BD10 ? Send Material Data
    Tcode WE05 ? Idoc List for watching any Errors
    Receiving System(Inbound ALE )
    Tcode SALE ? for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ? Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ? Idoc List for inbound status codes
    ALE IDOC Steps
    Sending System(Outbound ALE Process)
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Create Model View
    Tcode BD82 !V Generate partner Profiles & Create Ports
    Tcode BD64 !V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE ?3 for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 !V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 !V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 !V Send Material Data
    Tcode WE05 !V Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Change Pointers
    I know how to change the description of a material using ALE Change Pointers.
    I will give the following few steps
    1) Tcode BD61---> check the change pointers activated check box
    save and goback.
    2) Tcode BD50---> check the MATMAS check box save and comeback.
    3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
    4) Tcode BD52---> give message type : matmas press ok button.
    select all what ever you want and delete remaining fields.
    save & come back.
    5) 5) go to Tcode MM02 select one material and try to change the description and save it
    it will effects the target systems material desciption will also changes
    6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
    give Message type : MATMAS and Executte
    ALE/IDOC Status Codes/Messages
    01 Error --> Idoc Added
    30 Error --> Idoc ready for dispatch(ALE Service)
    then goto SE38 --> Execute the Program RBDMIDOC
    29 Error --> ALE Service Layer
    then goto SE38 --> Execute the Program RSEOUT00
    03 Error --> Data Passed to Port ok
    then goto SE38 --> Execute the Program RBDMOIND
    12 Error --> Dispatch ok
    Inbound Status Codes
    50 Error --> It will go for ALE Service Layer
    56 Error --> Idoc with Errors added
    51 Error --> Application Document not posted
    65 Error --> Error in ALE Service Layer
    for 51 or 56 Errors do the following steps
    goto WE19 > give the IDOC Number and Execute>
    Press on Inbound function Module
    for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
    Regards

  • User Exit or DB-Table for Work Center (CR01)

    Hi!
    I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
    So, does anybody know an user exit or BADI for work center?
    Also possible:
    The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
    Thanks,
    Konrad

    > You can check the BADI definition from transaction SE18,
    > 'LTRM_WORK_CNTR_DTRM', this might be helpful,
    How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
    > Work center details are avilable in CRHD table, you can
    > look for CR* from SE11 transaction,
    I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
    Thanks,
    Konrad

  • Work center data

    Hi Experts,
    How do i see work center data in SRM, like the users belonging to a work center, company code etc.
    The issue is , a work center ID is maintained in one of the approval level in a owrkflow.
    I want to know the users belonging to that work center.
    Kindly assist.
    Thanks,
    Siva.

    i created it from PO01

  • Table for work center..........

    Hi
    Is there any table for work center which shows available capacity v/s utilized capacity......Please revert with your valuable comments
    Rgds

    Hi,
    Check Table RC65L.
    Regards
    Kannan

  • Standard Idoc for Work order?

    Hi,
    Can you please let me know what is the Standard Idoc for Work order?
    Thanks
    POINTS WILL BE AWARDED

    Hello,
      Standard IDOC type for Work Order is LOIPRO01.
    Thanks,
    Venu

  • Number Range for Work Center

    Hello All
          Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
    Regards,
    J K Tharwani

    Thanks Sir for your reply,
            Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
    Regards,
    J K Tharwani

  • Customization Setting for Work center creation

    Dear all,
    What is the Customization Setting for Work center creation? How to do it?

    Hi,
    Here are the few things you can check
    OP40 : WC category
    OP17 : Formula for WC
    Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
    apart from above You can explore more in
    Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
    Riyaj

Maybe you are looking for