ALE-IDOC- Multiple IDOCs gets triggered with only one output exists

Dear Gurus,
We need you help to resolve the issue being faced with IDOC in our system.
From Sales order , an EDI output ZF40 gets trigggered which is a order confirmation. This is being sent to a Logical system
(Partner type LS in IDOC) which is F4F (Partner no.)
Now the issue is at sales order level, only one output line with ZF40 is triggered and in processing log one IDOC no. is showing.
We have received complaint from the external party F4F that for a same sales order , multiple IDOCs (around 500 IDOC's each in 3min interval )are being received at their end. We have checked in SAP , all these IDOC's were triggered from SAP only. All IDOC's are in green in SAP. But from where these IDOC's got originated is not known.
We have checked the batch jobs and not seems to be triggered from there.
Is there any other way that IDOC can originate automatically.? Please advise your valuable inputs as it will help to stop triggering of IDOC's (around 11,000 so far) in SAP and in receiving system.
Regards
Anand MOhanasundaram.

In t.code V/30, go to the output details. Here uncheck the box for multiple issuing and check again.
Regards,

Similar Messages

Multiple events per date with only one photo each - Unwanted

I have the eyefi wireless sd card in my camera and it is setup to transmit my photos into iphoto automatically, which it does. However, the problem arises in that iphoto creates multiple events for the same date each containing only one photo. I would prefer that iphoto create individual events per date and have the multiples of that date's photos within. I thought I had the settings configured to do so as I have preferences set for autosplit events one per day but I still see events such as - July 3, 2008 - July 3, 2008 - July 3, 2008 - each with only one photo inside.
I am wondering if it is something in iphoto's settings or the way in which eyefi transmits the photos into iphoto.
Any thoughts?

I do not have a WiFi connection to my camera so can not test but am just guessing
I can think of two possibilities
- 1 - if you are taking the photos with the WiFi connected then each time you snap a photo it may be being sent which would be looked at as a new import and therefore create a new event - to stop this I believe you would have to not have a full time WiFi connection to your camera or somehow set the camera to send batched - not each one - iPhoto will take each batch into and follow the rules for making events for that batch even if you camera is sending many batches of One photo
- 2 - You have the preference for making batches set to one every two hours and there is a long time between photos - I'm guessing that #1 is more likely
LN

How to call a stored procedure with only one output parameter using toplink

Can anybody help me to get out of this exception. I have tried through several ways, but could not find the solution.
I have a following stored proc : -
CREATE OR REPLACE PROCEDURE spt_remove_duplicates_pr (outbuffer OUT VARCHAR2)
IS
buff VARCHAR2(32000) := ' ';
BEGIN
buff := ' Hi From Stored Proc' ;
outbuffer : = buff;
END;
When I am executing it using following code :-
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("spt_remove_duplicates_pr");
call.addNamedOutputArgument("a","a",String.class);
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
String buff1 = (String) session.executeQuery(query);
I am getting the exception as : -
LOCAL EXCEPTION STACK:
EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3.4 (Build 432)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
INTERNAL EXCEPTION: java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ERROR CODE: 6550
     at oracle.toplink.exceptions.DatabaseException.sqlException(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
     at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
     at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
     at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
     at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)
INTERNAL EXCEPTION STACK:
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'SPT_REMOVE_DUPLICATES_PR'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:582)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2149)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2032)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2894)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:608)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabasePlatform.executeStoredProcedureCall(Unknown Source)
     at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(Unknown Source)
     at oracle.toplink.threetier.ServerSession.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(Unknown Source)
     at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelect(Unknown Source)
     at oracle.toplink.queryframework.DirectReadQuery.executeNonCursor(Unknown Source)
     at oracle.toplink.queryframework.DataReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ValueReadQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.DatabaseQuery.execute(Unknown Source)
     at oracle.toplink.queryframework.ReadQuery.execute(Unknown Source)
     at oracle.toplink.publicinterface.Session.internalExecuteQuery(Unknown Source)
     at oracle.toplink.threetier.ServerSession.internalExecuteQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at oracle.toplink.publicinterface.Session.executeQuery(Unknown Source)
     at com.marshmc.eta.reuse.persistent.PersistentService$DuplicateRemovalThread.run(Unknown Source)

I got the partial solution. The code is working now, however I am not getting the return value from stored proc.
The changed code is as :-
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("spt_remove_duplicates_pr");
call.addNamedOutputArgument("outbuffer","outbuffer",StringBuffer.class);
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
StringBuffer buff1 = (StringBuffer) session.executeQuery(query);
System.err.println("Done ! Output is : " + buff1);
The result is :-
Done ! Output is : null
How can I get the output ?

For the new delivery type created the Idoc is not getting triggered

Hi All,
I am facing the following problem:
For every outbound delivery getting created we have an Idoc which creates the file(sending the outbound delivery details), this file is sent to a system where the picking & packing of the goods happen. This process seems to be working fine for all the existing delivery types, but now we created a new delivery type for which the Idoc is not getting triggered.
Would like to understand what setting are we missing because of which the Idoc is not getting created for the new delivery type.
The Idoc being used is: DESADV01
Message type :DESADV
Thanks,
Geeta

I believe your existing idocs are created through a output type on the delivery ? if yes, probably you need to configure an existing output type / create a new output type for your new delivery type...

HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

Create multiple portal instances with only one database?

Can someone create multiple portal instances with only one database?
If so, how is this done, just by running the portal configuration wizard?
How are most people running with multiple developers working on portal? Do they share a portal instance, or create their own?
Thank you very much!
Phillip

i'm currently using 9ias rel 2(9.0.2) and i have install one infrastructure and two mid tier, hoping that this will create two portal, but it didn't. Can you please tell me how to do create two portal within one server.
thanks and regards;
andrew

I got a new pc and I am getting this message: The ipod 'harms ipod' is synced with another itunes library Do you want to erace this Ipod and synce with this itunes library? An Ipod can only be synced with only one itunes library at a time. Erasing and

The ipod 'harms ipod' is synced with another itunes library.Do you want to erase this ipod and sync with this itunes library? An ipod can be synced with only one itunes library at a time. Erasing and syncing replace the contents of this ipod with the contents of this itunes library.
I don't know what to do? I should save my library before I replace the contents, but I don't know how to do that! HELP!!

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

An iPhone can be synced with only one iTunes library at a time

I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?

I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution.

How to connect many devices with only one FW800 port in iMac?

Hi,
I am upgrading to a new Intel iMac from a 2004 vintage Dual2.0GHz PowerMac. I currently have 8x d2 Quadra drives chained by FW800, and 2x Iomega drives connected vis FW400 hub which also connects HD cams.
My questions is that with only one FW800 port in iMac, I think my devices connectivity is the following?
(1) Get a FW 800 hub (I can only find 2 port ones at the Apple store and BestBuy)
(2) Connect the d2 Quadras to one port of the FW800 hub
(3) Get a FW 800 to FW 400 cable
(4) Connect my 6 port FW400 hub to the 2nd port of the FW800 hub
Thanks for reviewing this solution, and I would also appreciate other suggestions or hear about your experiences if you have a similar set-up.
Will

In addition to your listed considerations, you should consider the following.
Many storage needs do not required FireWire 800 speed. For example, USB 2.0 works fine for your Time Machine backup drive. If you are just storing user data such as your iPhoto or iTunes media files, USB 2.0 is more than fast enough. So, as much as possible, if any of those external drives have USB 2.0 connections and the data storage does not need FireWire 800 speed, offload as much as possible to USB 2.0. I used to be a +FireWire snob+, but since getting an Intel iMac, I find that USB 2.0 works quite well for most data storage purposes.
There are new hard drives that are power efficient and as large as 2TB. Consolidate your data storage needs onto a smaller number of very large drives, partitioned as needed. This will make your setup more reliable (smaller number drives), and save reduce power consumption. If any of your current externals are SATA, you can probably replace the existing drive with an extra large one.
So, I think you setup should be, extra large FireWire 800 drive connected to the FireWire 800 port directly. Using a 9-pin to 6-pin cable, connect the FireWire 400 hub. Connect any non-storage FireWire 400 devices there. Do some data transfer testing to make sure having the 400 hub there on the chain does not cause the 800 connection to slow down.
Connect other drives as needed using USB 2.0, existing or new. Retire the smaller of your external drives.

Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="staging.local"/>
    <Domain Name="staging.local"/>
    <IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys

How to make 1D Array but with only one element filled in Real Time

Hi folks,
here I am with another question. I want to implement an prediction discrete state space observer which is going to run on a CRIO real time target. I am going to do it just like in the example which comes with LV.
I have some questions regarding the input and outputs which in the example those are "dummy".
My model is a SISO model, but the function "Construct SS model" returns parameters (A,B,C,D Matrices) as 2D arrays, so once you connect the cluster model into the Discrete Observer model, it takes y and u as 1D arrays despite of the fact that there is a SISO model.
I realized that the function I am using in the simulations, uses 1D arrays but with only one element filled:
Does anyone knows how to implement such 1D arrays in Real Time? I guess the way to do it is preallocating one array of zeros of size 1, and then recirculating it through some SR, and replacing the element with my real input and output, but at the dummy.vi, they are using a simple "build array"
function.

Ok, I did it that way. But I am facing another problem right now...
At some point the Discrete Observer return a NAN array, you will see the code in the code snippet?
I get rid of that component by component, but the observer gets "stuck" in it. So my Control law is zero... but the state stimate is NAN.
Also I am attaching the VI.
I do not know why, since in the simulation program all runs well. any thoughts? Maybe the internal numeric precision of the State Space Model?
Attachments:
RT - Pole Placement + Complete Observer.vi ‏40 KB

SQL Server 2012 Undetected Deadlock in a table with only one row

We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.
This is our main database, so most of the applications access it.
The day after the migration, when users started to run tasks, the database access started to experiment a total failure.
That is, all processes in the SQL 2k12 database were in lock with each other. This is a commom case of deadlock, but the Database Engine was unable to detect it.
After some research, we found that the applications were trying to access a very simple table with only one row. This table has a number that is restarted every day and is used to number all the transactions made against the system. So, client
applications start a new transaction, get the current number, increment it by one and commit the transaction.
The only solution we found was to kill all user processes in SQL Server every time this situation occurs (no more than 5 minutes when all clients are accessing the database).
No client application was changed in this migration and this process was working very well for the last 10 years.
The problem is that SQL 2k12 is unable to handle this situation compared to SQL 2k.
It seems to occurs with other tables too, but as this is an "entry table" the problem occurs with it first.
I have searched internet and some suggest some workarounds like using table hints to completely lock the table at the begining of the transaction, but it can't be used to other tables.
Does anyone have heard this to be a problem with SQL 2k12? Is there any fixes to make SQL 2k12 as good as SQL 2k?

First off re: "Unfortunatelly, this can't be used in production environment as exclusive table lock would serialize the accesses to tables and there will be other tables that will suffer with this problem."
This is incorrect.
Using a table to generate sequence numbers like this is a bad idea exactly because the access must be serialized. Since you can't switch to a SEQUENCE object, which is the correct solution, the _entire goal_ of this exercise to find a way to properly
serialize access to this table. Using exclusive locking will not be necessary for all the tables; just for the single-row table used for generating sequence values with a cursor.
I converted the sample program to VB.NET:
Public Class Form1
Private mbCancel As Boolean = False
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim soConn As ADODB.Connection
Dim soRst As ADODB.Recordset
Dim sdData As Date
Dim slValue As Long
Dim slDelay As Long
'create database vbtest
'go
' CREATE TABLE [dbo].[ControlNumTest](
' [UltData] [datetime] NOT NULL,
' [UltNum] [int] NOT NULL,
' CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
' [UltData] Asc
' )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 80) ON [PRIMARY]
' ) ON [PRIMARY]
mbCancel = False
Do
' Configure the Connection object
soConn = New ADODB.Connection
With soConn
.ConnectionString = "Provider=SQLNCLI11;Initial Catalog=vbtest;Data Source=localhost;trusted_connection=yes"
.IsolationLevel = ADODB.IsolationLevelEnum.adXactCursorStability
.Mode = ADODB.ConnectModeEnum.adModeReadWrite
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.Open()
End With
' Start a new transaction
Call soConn.BeginTrans()
' Configure the RecordSet object
soRst = New ADODB.Recordset
With soRst
.ActiveConnection = soConn
.CursorLocation = ADODB.CursorLocationEnum.adUseServer
.CursorType = ADODB.CursorTypeEnum.adOpenForwardOnly
.LockType = ADODB.LockTypeEnum.adLockPessimistic
.Open("SELECT * FROM dbo.ControlNumTest")
End With
With soRst
sdData = .Fields!UltData.Value ' Read the last Date (LOCK INFO 1: See comments bello
slValue = .Fields!UltNum.Value ' Read the last Number
If sdData <> Date.Now.Date Then ' Date has changed?
sdData = Date.Now.Date
slValue = 1 ' Restart number
End If
.Fields!UltData.Value = sdData ' Update data
.Fields!UltNum.Value = slValue + 1 ' Next number
End With
Call soRst.Update()
Call soRst.Close()
' Ends the transaction
Call soConn.CommitTrans()
Call soConn.Close()
soRst = Nothing
soConn = Nothing
txtUltNum.Text = slValue + 1 ' Display the last number
Application.DoEvents()
slDelay = Int(((Rnd * 250) + 100) / 100) * 100
System.Threading.Thread.Sleep(slDelay)
Loop While mbCancel = False
If mbCancel = True Then
Call MsgBox("The test was canceled")
End If
Exit Sub
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
mbCancel = True
End Sub
End Class
And created the table
CREATE TABLE [dbo].[ControlNumTest](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go insert into ControlNumTest values (cast(getdate()as date),1)
Then ran 3 copies of the program and generated the deadlock:
<deadlock>
<victim-list>
<victimProcess id="processf27b1498" />
</victim-list>
<process-list>
<process id="processf27b1498" taskpriority="0" logused="0" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1970" ownerId="3181" transactionname="implicit_transaction" lasttranstarted="2014-02-14T15:49:31.263" XDES="0xf04da3a8" lockMode="X" schedulerid="4" kpid="9700" status="suspended" spid="51" sbid="0" ecid="0" priority="0" trancount="2" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="21152" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3181" currentdb="35" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" stmtstart="80" sqlhandle="0x020000008376181f3ad0ea908fe9d8593f2e3ced9882f5c90000000000000000000000000000000000000000">
UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
(@Param000004 datetime,@Param000005 int)UPDATE [dbo].[ControlNumTest] SET [UltData]=@Param000004,[UltNum]=@Param000005 </inputbuf>
</process>
<process id="processf6ac9498" taskpriority="0" logused="10000" waitresource="KEY: 35:72057594039042048 (a01df6b954ad)" waittime="1971" schedulerid="5" kpid="30516" status="suspended" spid="55" sbid="0" ecid="0" priority="0" trancount="1" lastbatchstarted="2014-02-14T15:49:31.267" lastbatchcompleted="2014-02-14T15:49:31.267" lastattention="1900-01-01T00:00:00.267" clientapp="vbt" hostname="DBROWNE2" hostpid="27852" loginname="NORTHAMERICA\dbrowne" isolationlevel="read committed (2)" xactid="3182" currentdb="35" lockTimeout="4294967295" clientoption1="671156256" clientoption2="128058">
<executionStack>
<frame procname="adhoc" line="1" sqlhandle="0x020000003c6309232ab0edbe0a7790a816a09c4c5ac6f43c0000000000000000000000000000000000000000">
FETCH API_CURSOR0000000000000001 </frame>
<frame procname="unknown" line="1" sqlhandle="0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000">
unknown </frame>
</executionStack>
<inputbuf>
FETCH API_CURSOR0000000000000001 </inputbuf>
</process>
</process-list>
<resource-list>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf6ac9498" mode="S" />
<owner id="processf6ac9498" mode="U" requestType="wait" />
</owner-list>
<waiter-list>
<waiter id="processf27b1498" mode="X" requestType="convert" />
</waiter-list>
</keylock>
<keylock hobtid="72057594039042048" dbid="35" objectname="vbtest.dbo.ControlNumTest" indexname="PK_CorreioNumTeste" id="lockff6e6c80" mode="U" associatedObjectId="72057594039042048">
<owner-list>
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="U" />
<owner id="processf27b1498" mode="X" requestType="convert" />
</owner-list>
<waiter-list>
<waiter id="processf6ac9498" mode="U" requestType="wait" />
</waiter-list>
</keylock>
</resource-list>
</deadlock>
It's the S lock that comes from the cursor read that's the villian here. U locks are compatible with S locks, so one session gets a U lock and another gets an S lock. But then the session with an S needs a U, and the session with a U needs an
X. Deadlock.
I'm not sure what kind of locks were taken by this cursor code on SQL 2000, but on SQL 2012, this code is absolutely broken and should deadlock.
The right way to fix this code is to add (UPDLOCK,SERIALIZABLE) to the cursor
.Open("SELECT * FROM dbo.ControlNumTest with (updlock,serializable)")
So each session reads the table with a restrictive lock, and you don't mix S, U and X locks in this transaction. This resolves the deadlock, but requires a code change.
I tried several things that didn't require a code, which did not resolve the deadlock;
1) setting ALLOW_ROW_LOCKS=OFF ALLOW_PAGE_LOCKS=OFF
2) SERIALIZABLE isolation level
3) Switching OleDB providers from SQLOLEDB to SQLNCLI11
Then I replaced the table with a view containing a lock hint:
CREATE TABLE [dbo].[ControlNumTest_t](
[UltData] [datetime] NOT NULL,
[UltNum] [int] NOT NULL,
CONSTRAINT [PK_CorreioNumTeste] PRIMARY KEY CLUSTERED
[UltData] Asc
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = on, FILLFACTOR = 80) ON [PRIMARY]
) ON [PRIMARY]
go
create view ControlNumTest as
select * from ControlNumTest_t with (tablockx)
Which, at least in my limited testing, resovlved the deadlock without any client code change.
David
David http://blogs.msdn.com/b/dbrowne/

How do i make a slideshow lightbox with only one main image

Hi all,
i was wondering How do i make a slideshow lightbox with only one main image being seen on the page and once clicked the lightbox will open and have multiple images viewable from prev/next buttons with comments.
Reason being is i want have a portfolio page with my work all viewable from that one page so i will have say 10 lightboxes on the page but all with one master image.
Cheers,
Chris

hello
I have the same problem... Its so basic thing and is it really missed in muse ?

Counting (interneal timebase)events with only one counter

Hello,
i am using a PXI-6115 card. This card is external clocked with 8 MHz. But I want to measure only about every second. So I divided the external clock with the internal counter 0. This works fine.
Now my problem. Now I want to know the external clock rate. Is it possible to build a pulse period measurement with only one counter??
I thinking of counting internal timebase- pulses with counter 1 and to start and stop the counter 1 by the output of counter 0.
Is this possible and how??
Thanks for help, Ruediger

Yes, there's a way to measure pulse periods with a single counter. The trick is to perform a buffered period measurement and sum the periods. The size of the buffer will determine the quantization/roundoff error.
The source of this error is that you have no control over the initial phase relationship of your external clock and your internal timebase. There's a nominal ratio between the two frequencies, and you'd start by expecting ratio * (buffer size) total cycles counted.
However, your actual count must be an integer, so you'll get either the next-highest or next-lowest integer, but you can't predict or control which one.
Example: If you collect 1 period at 8 MHz using the internal 20 MHz timebase, you'll capture either 2 or 3 e
dges from your timebase, implying a measured frequency of either 10 MHz or 6.6667 MHz.
If you collect 1001 periods, you'll capture a total of 2502 or 2503 timebase edges, implying a measured frequency of either 8.0016 MHz or 7.9984 MHz.
Notes:
1. In many cases, you can set up for buffered event counting, using the internal 20 MHz clock as a source and your external 8 MHz as a gate.
The advantage is that the buffered values already represent cumulative time so you don't need to sum them.
A disadvantage would be that the internal 24-bit counter value will roll-over in less than 1 second at 20 MHz. I typically capture periods and then sum in software because I can convert to floating point between capture and sum if necessary to produce both high-resolution and long duration measurements.
2. You should typically ignore the very first value in the buffer and work only with the others. If you want to capture 1001 legitimate periods, size the buffer for at least 1002
-Kevin P.

Hide unhide rolemenu in web with only one link

Hi together
is it possible to hide unhide the role menu in web with only one link by using command urls?
Regards,
M. Erbil

Hi Memo,
use something like this:

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ROLEMENU"/>
         TEMPLATE PROPERTIES
</object>
<HTML>
<HEAD>
<TITLE>Rolemenu</TITLE>
      <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
     <script type="text/javascript" >
/* This function switches the attribute HIDDEN (alternate Tablestyles) for item mytable
1. Get actual value for attribute HIDDEN
2. Send Commando with new attribute to BW Server */
        function switch_visibility(mytable) {
         var prop = SAPBWGetItemProp(mytable);
         var visibility='X';
         if (prop != null){
                  for(i=1;i<prop.length;i++){
                            if (prop<i>[0] =="HIDDEN") visibility = prop<i>[1];
            if (visibility =='X') {
                           visibility=' '
            else
                        visibility = 'X';
            SAPBWOpenURL(SAP_BW_URL_Get() +'&item=' + mytable +'&HIDDEN=' + visibility);
     -->
     </script>
</HEAD>
<BODY>
<P> <object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="ROLEMENU_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_MENU"/>
         <param name="WIDTH" value="335"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="TARGET" value=""/>
         <param name="HEIGHT" value="285"/>
         <param name="IFRAME" value="X"/>
         <param name="IFRAME_STYLE" value="X"/>
         <param name="HIERARCHY_COLOR" value=""/>
         <param name="DIFF_ICONS" value=""/>
         ITEM:            ROLEMENU_1
</object> </P><!—Include a button in HTML with id mybutton1. By clicking on link the function switch_visibility for item ROLEMENU_1 will be executed à
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table>
<tr>
   <td class="SAPBEXBtnStd"   id="mybutton1" > <A href="javascript:switch_visibility('ROLEMENU_1');" >show / hide menu</A>
   </td>
</tr>
</table>
</td>
</tr></TABLE><!— call function set_button, to set the correct style class for button mybutton1 à
<script type="text/javascript" >
</SCRIPT>
</BODY>
</HTML>
Regards,
Adem

ALE-IDOC- Multiple IDOCs gets triggered with only one output exists

Similar Messages

Maybe you are looking for