ALE-IDOC urgent
user creates PO in sap.after all the entry when he presses save button in PO an idoc should trigger and it should go to XI.what configurations we need for that
regards
prajith
Hi Prajith,
You will need define the ALE linkages between the two systems.
>> Define partner profile
>> Define port
>> Maintain entries in tcode VOE2
>> Maintain entries in tcode VOE4
>> Create a output message type and the relevant condition records in PO so when on save the output gets triggered and an idoc is sent.
These are some of the steps. There are many more depending upon your actual requirement.
CHeers
VJ
Similar Messages
-
REGARDING ALE IDOCS USEREXITS URGENTLY
hi i need urgently ALE IDOCS,AND USEREXIT SOME REALTIME QUESTIONS & ANSWERS HEPL ME PLZ..
SEND ME THIS MAILID:[email protected]For user exits:
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
Best Regards,
Vibha Deshmukh
*Please mark all the helpful answers -
ALE/IDOC interview q's with answers(urgent)
Hi folks,
I want ALE/IDOC q's and answers .I have gathered some ,but still i want more...Please send as soon as possible.
Regards,
nagarajHi,
Remember all the following TCodes:
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE12 Test Modified Inbound File
WE14 Test Outbound Processing
WE15 Test Outbound Processing from MC
WE16 Test Inbound File
WE17 Test Status File
WE18 Generate Status File
WE19 Test tool
WE20 Partner profiles
WE21 Port definition
WE23 Verification of IDoc processing
WE24 Default values outbound parameter
WE27 Default value inbound parameter
WE30 Development IDoc Type
WE31 Development IDoc Segment
WE32 Development IDoc View
WE33 Value tables for IDoc documentation
WE34 Object for Display of XML IDocs
WE40 System process codes
WE41 Process codes, outbound
WE42 Process codes, inbound
WE43 Funct.module: Status record display
WE44 Partner Types and Checks
WE45 Forward (inbound) (V3, EDILOGADR)
WE46 IDoc administration
WE47 Status Maintenance
WE48 Inbound process codes: Texts
WE49 Inbound process codes: Change texts
WE50 System process codes: Texts
WE51 System process codes: Change texts
WE52 Outbound process codes: Texts
WE53 Outbound process codes: Change texts
WE54 FMs for changing file names
WE55 Function Module for Path Names
WE56 Status process codes
WE57 Assignment Messages for Appl. Objs
WE58 Status process codes: Texts
WE59 Change status process codes
WE60 Documentation for IDoc types
WE61 Documentation for IDoc record types
WE62 Documentation for segments
WE63 Parser for IDoc types and rec.types
WE64 Documentation message types
WE70 Conversion: Basic types
WE71 Conversion: Extensions
WE72 Conversion: IDoc types
WE73 Conversion: Logical messages
WE81 Logical message types
WE82 Assignment Messages for IDoc Type
WE84 Assignment of IDoc and appl. fields
OYSN Number Ranges for IDOC
sm59 Set up the RFC Destination
If you want You can further Refer the Text Book By: Aravind & Nagapal.
It is very useful.
Regards,
Anji -
Urgent: Application Object Type for ALE IDoc
Hi All,
I am struggling with ALE IDoc, I just wanted to know that is it mandatory to create Application Object Type when i have created my own message type, Idoc type, segment type and Function Module. I am Getting an error while excuting transaction we42( Maintaining Process code)
Error: Application Object Type is not planned.
Please Help with this. i don't have any requirement of filtering or serialisation, so still do i need to create these application objects.
Useful ans will be rewarded.
ThanxHi,
Yes u need to have the assignment of Object type as ur extending the IDOC.
Check the steps below:
TCode- BD95.
Create ALE object type Z... with table name EKKO and Field name -BSART
Step2:
Tcode- BD59 Assignment of Object type to Message
Give the message type ORDERS.
Assign the object type Z........ to segment type E1EDK01 with field BSART.
Regards
Kannaiah -
Urgent: Creating ALE IDOC for SALES ORDER
hi
please tell me <b>step by step procedure to create ALE IDOC for SALES ORDER?</b>
reward for sure
regards
ravishHi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards -
Data transfer using ALE/IDOC into XML.
Dear All,
I have to transfer FI document data (FB01) from the sap system ,convert it into XML and dump it in 1 of the file servers.I want to do this using ALE/IDOC.Is it possible to do the same and how.Similarly i want to do the same for Vendor and Customer master i.e sending the data in XML format.
Kindly Suggest how do i go about doin the same..Its very urgent.Please help.
Thanks & Regards,
Lailu Philip.In continuation:
Example Purchasing & Selling scenario
We will develop a custom IDoc to carry the billing number from the Service Receivers system to the Service Providers system. We will populate the IDoc in a user exit on the sending side and we will process the transaction on the receiving side using a custom function module and a BDC transaction call.
No rule conversion, segment filtering or version conversion will be implemented in the model as described in Figure 1.
Requirements
Working ALE environment - See ALE Basis Configuration Guide;
ALE scenario design together with the business requirement;
Development access; and
ALE configuration access.
NOTES:
1. All IMG references to transactions are located in the transaction SALE which is the ALE portion of the IMG
2. This is one way of developing a scenario where no message control exists. If message control exist (EG. On purchase orders) then NAST can be used to call an outbound function module that would create the required IDocs.
3. Extensive knowledge of IDocs and ALE basis configuration is required in order to understand this guide.
2. OUTBOUND PROCESSING
2.1. Create IDoc type (WE30) Client independent
The IDoc type refers to the IDoc structure that you will require for your development. In our case the IDoc type is called ZINVRV01. This IDoc type will have 1 segment called Z1INVRV with 2 fields, LIFNR & XBLNR, in this segment. If you require many segments or nested segments then they are also created using the same procedure.
We will create the IDoc of the following structure:
ZINVRV01
Purchasing and Selling - Invoice receipt reversal
Z1INVRV P&S - Segment 1
Segment fields
LIFNR Vendor account number
XBLNR Reference document number
Figure 3: IDoc type ZINVRV01
To create the IDoc type, follow these next few steps:
Enter transaction WE30 (ALE -> Extensions -> IDoc types -> Maintain IDoc type)
Type in ZINVRV01 and click on Basic IDoc type, click the Create icon
Click on Create new (we are creating an IDoc from scratch but you may want to copy another IDoc if it is similar to your requirements) and enter a description, and press enter
Click on ZINVRV01 and then on the Create icon
Enter Z1INVRV as the segment type (must start with Z1), check mandatory if the segment must exist (in this case check it), enter 1 in minimum number and 1 as maximum number. (Make the maximum number 9999999999 if there are going to be many of these segments in each IDoc. IE. When line items are passed via IDocs), click on Segment editor
Enter a description for your segment type and create
Enter a description for your segment, enter each field required in your IDoc, in our case type LIFNR across for Field name, DE structure and DE documentation, repeat for XBLNR and press enter to validate.
Save and generate, press back
To release the segment choose Goto, Release from the menu
Check the box on the line of your new segment
Save, back and enter
Your IDoc type structure should be displayed with your new segment
Save and back
To release the IDoc type choose Extras, Release type from the menu and Yes
Your IDoc is now ready for use. If you need to add fields or segments to your IDoc type, you will need to cancel the release of the IDoc type as well as the segment release using a similar procedure followed above (except now you uncheck the release box for the segment and you choose cancel release for the IDoc type).
2.2. Create message type (WE81) Client independent
To create a new message type, follow these next few steps:
Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
Choose Create logical message type by double clicking on it
Click on change icon to enter change mode
Click on New entries to add a new type
Enter the required message type, in our case it is ZINVRV and an appropriate description
Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) Client independent
To link the message type to the IDoc type follow these next few steps:
Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
Click on change icon to enter change mode
Click on New entries to create the link
Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
Save and exit
Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
Click on change icon to enter change mode
Click on New entries to create the link
Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
Type in your message type ZINVRV and press enter
Click on New entries
Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
Save and exit.
You have now created an object that well use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) Client dependent
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
Choose the receiving systems to which the sending system must forward message type ZINVRV to.
For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
Save the entries.
NOTES:
You cannot maintain a message type between the same sender and receiver in more than one customer distribution model.
Only the owner is authorised to modify the model.
To change the owner of a model, choose the 'Maintain ownership of customer distribution model' function. Make sure that all changes will be distributed to all systems that know the corresponding model. To do so, you can use the correction and transport system.
To transport the customer distribution model you should use the Distribute customer model function of the IMG as described below.
2.3.2. Distribute customer model (BD71) Client dependent
After the customer model has been created centrally, it must be distributed to the other remote systems. This entails first of all setting up the communication for the distributed systems and then sending the model.
2.3.2.1. Distribute Model (BD71) Client dependent
This task is performed on your ALE reference client. To distribute the customer distribution model, read the ALE configuration procedure and follow these steps:
Make the settings for the communication with the other decentral systems, you have not set them yet.
Define the RFC destination for R/3 connections whose names correspond to the name of the corresponding logical system.
Create the output partner profile.
Distribute the customer model
Specify the name of the customer model.
You must specify the target system to which you want to distribute the customer model.
You must repeat this function for every distributed logical system.
2.3.2.2. Maintain sending system partner profile (WE20) Client dependent
With this function, you define the partner profiles for all outbound and inbound messages on the basis of the customer distribution model.
After you have defined and distributed the customer model, you will have to maintain the partner profiles locally. To do this read the ALE configuration procedure.
Enter the output mode (background, immediately) and the package size for outbound processing.
Requirements
The customer model must be maintained.
RFC destinations must be maintained.
The customer model must be distributed.
To ensure that the appropriate persons in charge are informed if a processing error occurs, you must make settings in: Error processing Maintain organisational units.
2.4. Populate & distribute IDoc using ABAP
An IDoc consists of a control record with structure edidc and one or more data records with structure edidd. The control record contains the sender and recipient of the IDoc, as well as information on the type of message.
To be able to pass an IDoc to the ALE layer, you must set up a field string with structure edidc and an internal table with structure edidd. They are used to call function module master_idoc_distribute, which performs the save to the database and triggers the dispatch if necessary.
2.4.1. Example code
The code displayed below does the following:
populates our IDoc segment Z1INVR with the 2 fields XBLNR and LIFNR, populates the segment name and appends this to an internal table used to store the IDoc data;
populates the control record info with the message type and IDoc type; and
calls the MASTER_IDOC_DISTRIBUTE function module which distributes the IDoc as configured in the customer distribution model.
Data declaration statements
DATA: C_INVREV_SEGNAME(7) TYPE C VALUE 'Z1INVRV',
C_INVREV_MESTYPE(6) TYPE C VALUE 'ZINVRV',
C_INVREV_IDOC_TYPE(8) TYPE C VALUE 'ZINVRV01',
Z1INVRV LIKE Z1INVRV,
C_INVREV_DOCTYPE LIKE BKPF-BLART VALUE 'YY',
IDOC_CONTROL LIKE EDIDC,
T_COMM_CONTROL LIKE EDIDC OCCURS 0 WITH HEADER LINE,
IDOC_DATA LIKE EDIDD OCCURS 0 WITH HEADER LINE.
Move the document header into a structure
LOOP AT DOC_HEAD_TAB INTO DOC_HEAD.
ENDLOOP.
Move the document item data into a structure
LOOP AT DOC_ITEM_TAB INTO DOC_ITEM WHERE NOT ( LIFNR IS INITIAL ).
ENDLOOP.
Populate the IDoc segments field with the required data
CLEAR Z1INVRV.
Z1INVRV-LIFNR = DOC_ITEM-LIFNR. Store vendor number for filter
Z1INVRV-XBLNR = DOC_HEAD-XBLNR. Billing number
IDOC_DATA-SEGNAM = C_INVREV_SEGNAME. Segment name
IDOC_DATA-SDATA = Z1INVRV. Segment data
APPEND IDOC_DATA. Populate IDoc internal table
Move the control data info required for the distribution
IDOC_CONTROL-MESTYP = C_INVREV_MESTYPE.
IDOC_CONTROL-DOCTYP = C_INVREV_IDOC_TYPE.
Call the distribute function with the required parameters
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE' IN UPDATE TASK
EXPORTING
MASTER_IDOC_CONTROL = IDOC_CONTROL
TABLES
COMMUNICATION_IDOC_CONTROL = T_COMM_CONTROL
MASTER_IDOC_DATA = IDOC_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5.
Figure 4: Outbound processing example code
NOTE:
For debugging purposes, use transaction WE05 (IDoc overview) to see check your IDoc status, or to see whether an IDoc was created/
3. INBOUND PROCESSING
3.1. Create Function Module
This function module is called when a message type, of type ZINVRV, comes into the receiving system. This needs to be configured and is dealt with later in this section. The function module is passed the IDoc as a parameter.
Example parameters
Import parameters Reference field Opt Y/N
INPUT_METHOD BDWFAP_PAR-INPUTMETHD N
MASS_PROCESSING BDWFAP_PAR-MASS_PROC N
Export Parameters Reference field Opt Y/N
WORKFLOW_RESULT BDWFAP_PAR-RESULT N
APPLICATION_VARIABLE BDWFAP_PAR-APPL_VAR N
IN_UPDATE_TASK BDWFAP_PAR-UPDATETASK N
CALL_TRANSACTION_DONE BDWFAP_PAR-CALLTRANS N
Table Parameters Reference field Optional Y/N
IDOC_CONTRL EDIDC
IDOC_DATA EDIDD
IDOC_STATUS BDIDOCSTAT
RETURN_VARIABLES BDWFRETVAR
SERIALIZATION_INFO BDI_SER
Exceptions
WRONG_FUNCTION_CALLED
Example code
The code displayed below does the following:
populates a BDC table with the IDoc info;
calls the transaction via a BDC call; and
updates the IDoc status according to the BDC error status.
EXTRACT FROM: Z_IDOC_INPUT_ZINVRV
Declaration of local variables
DATA: C_SEGNAM(10) TYPE C VALUE 'Z1INVRV'.
*-Loop through the IDOCs
LOOP AT IDOC_CONTRL.
*---Loop through the data for the IDOC
LOOP AT IDOC_DATA WHERE DOCNUM = IDOC_CONTRL-DOCNUM.
CASE IDOC_DATA-SEGNAM.
WHEN C_SEGNAM.
Here we get the info from the idoc table
IT_Z1INVRV = IDOC_DATA-SDATA.
ENDCASE.
PERFORM REV_INV.
ENDLOOP.
PERFORM UPDATE_IDOC_STATUS.
ENDLOOP.
FORM REV_INV "Reverse invoice form
Local variables & constants
DATA: C_TCODE LIKE BKPF-TCODE VALUE 'VF11'. "BDC transaction code
Now we can build the bdc table to call the reversal transaction start of screen 109
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = 'SAPMV60A'.
BDC_TAB-DYNPRO = '109'.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
Document number
CLEAR BDC_TAB.
BDC_TAB-FNAM = 'KOMFK-VBELN(01)'.
BDC_TAB-FVAL = IT_Z1INVRV-XBLNR. "Billing document number
APPEND BDC_TAB.
OK Code for screen 109
CLEAR BDC_TAB.
BDC_TAB-FNAM = 'BDC_OKCODE'.
BDC_TAB-FVAL = 'SICH'.
APPEND BDC_TAB.
Now we can call transaction 'VF11' with the populated bdc table. The transaction is called inside the idoc-contrl loop, so a transaction will be called for every idoc (journal). the transaction is called in no-display mode ('N') because this code runs in background as it is called by ale. The update is specified to be synchronous ('S') because we have to wait for the result to update the idoc status correctly.
CALL TRANSACTION C_TCODE USING BDC_TAB MODE 'N' UPDATE 'S'.
Store the return code for use in another form (status update)
RETURN_CODE = SY-SUBRC.
Here we check the return code, if there was an error, we put the transaction in a bdc session for the user to review and correct.
IF SY-SUBRC NE 0.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'ZINVRV'
USER = C_ALE_USER
KEEP = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = C_TCODE
TABLES
DYNPROTAB = BDC_TAB.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
ELSE. "No problems
C_EXISTS = 'N'.
Select from the billing document table to get sales doc number
SELECT * FROM VBRP WHERE VBELN = IT_Z1INVRV-XBLNR.
Select from the sales document table to get user status number
SELECT SINGLE * FROM VBAP WHERE VBELN = VBRP-AUBEL AND
POSNR = VBRP-AUPOS.
Select from the status table to change the user status to pending
SELECT * FROM JEST WHERE OBJNR = VBAP-OBJNR AND
STAT LIKE C_USER_STATUS.
IF JEST-STAT = C_US_PENDING. "User status is pending
JEST-INACT = C_UNCHECKED. "Make pending the active status
UPDATE JEST.
C_EXISTS = 'Y'. "I.E. An entry is already in table
ELSEIF JEST-INACT = C_UNCHECKED AND JEST-STAT NE C_US_PENDING.
JEST-INACT = C_CHECKED. "Make everything else inactive
UPDATE JEST.
ENDIF.
ENDSELECT.
IF C_EXISTS = 'N'. "I.E. Pending has never been a status before
JEST-OBJNR = VBAP-OBJNR.
JEST-STAT = C_US_PENDING.
JEST-INACT = C_UNCHECKED. "Make pending the active status
INSERT JEST.
ENDIF.
ENDSELECT. "Select from VBRP (Billing document table)
ENDIF.
ENDFORM. " REV_INV
FORM UPDATE_IDOC_STATUS.
Now we check the CALL TRANSACTION return code and set IDOC status
CLEAR IDOC_STATUS.
IF RETURN_CODE = 0.
WORKFLOW_RESULT = '0'.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-UNAME = SY-UNAME.
IDOC_STATUS-REPID = SY-REPID.
IDOC_STATUS-MSGTY = SY-MSGTY.
IDOC_STATUS-MSGID = SY-MSGID.
IDOC_STATUS-MSGNO = SY-MSGNO.
IDOC_STATUS-MSGV1 = SY-MSGV1.
IDOC_STATUS-MSGV2 = SY-MSGV2.
IDOC_STATUS-MSGV3 = SY-MSGV3.
IDOC_STATUS-MSGV4 = SY-MSGV4.
RETURN_VARIABLES-WF_PARAM = 'Processed_IDOCs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
ELSE.
WORKFLOW_RESULT = '99999'.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-UNAME = SY-UNAME.
IDOC_STATUS-REPID = SY-REPID.
IDOC_STATUS-MSGTY = SY-MSGTY.
IDOC_STATUS-MSGID = SY-MSGID.
IDOC_STATUS-MSGNO = SY-MSGNO.
IDOC_STATUS-MSGV1 = SY-MSGV1.
IDOC_STATUS-MSGV2 = SY-MSGV2.
IDOC_STATUS-MSGV3 = SY-MSGV3.
IDOC_STATUS-MSGV4 = SY-MSGV4.
RETURN_VARIABLES-WF_PARAM = 'ERROR_IDOCS'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
ENDIF.
APPEND IDOC_STATUS.
ENDFORM. " UPDATE_IDOC_STATUS
Figure 5: Inbound processing example code
3.1.1. Debugging inbound FM
Use transaction WE19 to test inbound function module in debugging mode. Also use WE05 to view the IDocs and their statuses.
3.2. Maintain ALE attributes
The inbound function module needs to be linked to the message type and the message type needs to be linked to the appropriate inbound process code at the partner profile level before the scenario is enabled. These steps are described below in detail.
3.2.1. Link Message Type to Function Module (WE57) Client independent
To link a message (ZINVRV) type to a function module (Z_IDOC_INPUT_ZINVRV) follow these steps:
Enter transaction WE57 (ALE -> Extensions -> Inbound -> Allocate function module to logical message)
Select an entry (EG. IDOC_INPUT_ORDERS) and copy
Type in module name Z_IDOC_INPUT_ZINVRV
Type in basic IDoc type as ZINVRV01
Type in message type as ZINVRV
Type object type as IDOCINVOIC (Invoice document) - Used for workflow
Direction should be set to 2 for inbound
Enter and save
3.2.2. Define FM settings (BD51) Client independent
Enter transaction BD51 (ALE -> Extensions -> Inbound -> Define settings for input modules)
Click on New entries
Type in the name of the new function module Z_IDOC_INPUT_ZINVRV
Enter 0 for mass processing in the output column
Save and Exit
3.2.3. Maintain process codes (WE42) Client dependent
A process code needs to be maintained on each client. It then needs to be linked to the message via the partner profiles on each client. This allows the various clients to use a unique function module for the same message type.
To maintain the process code follow these steps:
Log on to the appropriate receiving system client
Execute WE42 (ALE -> Extensions -> Inbound -> Maintaining process codes inbound)
Choose Inbound with ALE service
Choose Processing with function module
Click on Processing with function module and choose create icon
Click on New Entries
Type in process code ZINR and give it a description and save
Now you are asked to Please maintain codes added in ALE entry methods, enter and choose Z_IDOC_INPUT_FIRVSL and copy it. You should choose a FM similar to your one.
Enter your process code ZINR
Enter your function module Z_IDOC_INPUT_ZINVRV
NOTE: The next 6 steps are used in workflow error handling.
Enter IDPKFIDCMT in object type
Enter MASSINPUTFINISHED in End event
Enter IDOCINVOIC in IDoc object type
Enter INPUTERROROCCURREDFI in IDoc start event
Enter INPUTFINISHEDFI in IDoc End event
Enter IDOCINVOIC in Application object type
You will need to determine the task associated with object IDOCINVOIC, and then assign the appropriate position to it. This position will then receive the application error messages via workflow.
To set up the workflow area please consult the Workflow config guide.
3.3. Create inbound partner profile
For each message type you need to maintain the inbound partner profiles.
3.3.1. Maintain receiving system partner profile (WE20) Client dependent
To maintain inbound partner profiles read the document ALE configuration procedure:
Add the message type ZINVRV with process code ZINR.
Enter the output mode (background, immediately) for inbound processing and NO message code.
Enter the position S and choose the ALE administrator 50000085. This position will then receive all the technical ALE errors via workflow.
3.4. Test
Once the inbound function module has been debugged the scenario should be ready to test in its entirety. If problems occur, read through the relevant areas of this document to check your configuration or code.
Hope this will help you,
If you want me to explain more, you can give me your email id.
Reward with points incase you are satisfied.
Regards,
Sushama -
ALE/IDOC[custom table transfer]
Hi All,
I have a doubt regarding the type of programs used to post the idocs using ALE in the outbound process.
Please also tell me which program I will use to post a custom table of mine to another server using ALE/IDOC.
Please also tell me the procedure to do the same mentioned above.
Please help. Its a urgent requirement...........................
Thanks in advance......................................................Hi Guru,
if you cannot use a standard idoc then you´ll need to create a custom one starting from the segment (WE31) where you can create an Idoc segment starting from your own Z table structure using the wizard.
Then you´ll need to also create the idoc type (WE30) and link the segment to the IDoc.
Then you´ll need to create a message type and link the message type to the Idoc type (WE81, WE82).
Then you´´ll use RFC "MASTER_IDOC_DISTRIBUTE" to populate the IDOC and send the data.
This is a sample code just to give you an idea:
DATA:
Z_SEGNAME(7) TYPE C VALUE 'SEGMENT',
Z_MESTYPE(9) TYPE C VALUE 'MESSAGE',
Z_IDOC_TYPE(8) TYPE C VALUE 'IDOC'.
DATA:
IDOC_CONTROL LIKE EDIDC,
T_COMM_CONTROL LIKE EDIDC OCCURS 0 WITH HEADER LINE,
IDOC_DATA LIKE EDIDD OCCURS 0 WITH HEADER LINE.
*Reads data from Z table
SELECT *
FROM ZTABLE
INTO TABLE L_ZTABLE.
*Set the control data info required for the distribution
IDOC_CONTROL-MESTYP = Z_MESTYPE.
IDOC_CONTROL-DOCTYP = Z_IDOC_TYPE.
*Populate the IDoc
LOOP AT L_ZTABLE.
CLEAR IDOC_DATA.
IDOC_DATA-SEGNAM = Z_SEGNAME.
IDOC_DATA-SDATA = ZTABLE.
APPEND IDOC_DATA.
ENDLOOP.
*Deliver the IDOC as defined in distribution model/partner profile
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE' IN UPDATE TASK
EXPORTING
MASTER_IDOC_CONTROL = IDOC_CONTROL
TABLES
COMMUNICATION_IDOC_CONTROL = T_COMM_CONTROL
MASTER_IDOC_DATA = IDOC_DATA
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 1
ERROR_WRITING_IDOC_STATUS = 2
ERROR_IN_IDOC_DATA = 3
SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
OTHERS = 5.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF. -
ALE/IDOC[custom table]
Hi All,
I have a doubt regarding the type of programs used to post the idocs using ALE in the outbound process.
Please also tell me which program I will use to post a custom table of mine to another server using ALE/IDOC.
Please also tell me the procedure to do the same mentioned above.
Please help. Its a urgent requirement...........................
Thanks in advance......................................................hi,
u can do it using CHANGE POINTERS method.For this u need to do the following configurations.
1>WE81
2>WE31
3>WE30
4>WE82
5>SCDO
6>BD61
7>BD52
8>BD50
9>BD60
10>WE20
11>BD64.
First create an object in tcode -SCDO,there u specify ur tablename.
now the fields which are there in the ztable,in the further characteristics of the dataelement u need to check the check box CHANGE DOCUMENT HEADER.Now in SCDO u need to generate the upgarde program,the sap will generate four includes,u need to call them in ur program.
U need to write one FM ,where u need to use the FM's.
CHANGE_POINTERS_READ,
CHANGE_POINTERS_STATUS_WRITE.
Regards,
nagaraj -
ALE/ IDOC CONFIGURATION OBJECT
IT'S URGENT
I NEED AN OBJECT IN ALE/IDOC CONFIGURATION SETTINGSHi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM -
HI GURUS
i want detailed distributiuon on ale idoc processing along with transaction codes step by step
plzzz its urgent
baskarALE
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
**************************************************8
http://service.sap.com/ale
ABOUT ALE AND IDOC
Go through this hope u can understand .
ALE/IDOC
IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
NEED FOR ABAP PROGRAMMING arises if
1)New IDOC was created
Depending upon the triggering mechanism i.e change pointer,message control
etc the programming technique changes and the type of process.
2)Existing IDOC was extended
User Exits are used to populate data in new segments added and to read them
back.
3)To enhance an exsiting process.
User Exits are used .
Basic structure of an OUTBOUND PROGRAM
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
OUTBOUND PROCESS AND OUTBOUND PROGRAM.
Outbound programs are used in outbound process to genearte IDOCs . There
purpose is to extract the data from the tables and to fill the IDOC data records
and the control record in the IDOC and pass ito the ALE layer for distribution to the recieving system .
Depending upon the triggering mechanism (how and when the outbound program will be started different techniques and interface is used for outbound program.
1)Message control
Application like PO(purchase order) creation use this technique , where the output type is linked to the application(Message control is a configurable cross application component which can be set in IMG .Such programs are created in the form of function modules and linked to the output type which is linked to the apllication.These have predefined interfaces.
In outbound programs(function module) that use message control the key of the
application document is passed to the function module whcig will read the data from the table depending upon the key passed(NAST structure) and fill the IDOC segemnts with the application data.The control record is also passed to the function module but is not fully filled, the rmaining fields are filled and the control is passed back to the calling program which is RSNASTED and is invoked by the
message control to process ALE and EDI output types and this program on recieving the IDOC data will create the physical IDOC in the system.
The parameteers passed to the function module are
IMPORTING PARAMETERS
OBJECT LIKE NAST
It contains documents key.
CONTROL_RECORD_IN LIKE EDIDC
It contains the partailly filled control record
EXPORETING PARAMETER
OBJECT_TYPE
CONTROL_RECORD_OUT LIKE EDIDC
TABLES
INT_EDID LIKE EDIDD
The internal table used to fill the data records in the same order as they exists in the IDOC.
The important parameters that should be filled in the custom function module are
CONTROL_RECORD_OUT and INT_EDIDD .The OBJK field of the structue NAST contains the key of the apllication document.
2)Stand alone programs
Generally used for Master Data transfer and as such depending upon the requirement can have different interfaces.The programs have a selection screen which has select options to select the objects, and parameters for specifying the recipient Logical System and the Message Type.
Data is selected based on the specified objects from the tables . and control record of type EDIDC is created and filled with important values like DIRECTION ,IDOCTP,RCVPRT,RCVPRN and MESTYP .
Data is filled in an internal table of TYPE EDIDD according to segment definitions
and in same order and the function module MASTER_IDOC_DISTRIBUTE is called passing the control record and the internal table containg IDOC data and importing an internal table consisting of control records for each communication IDOCS created.
3)Change pointer
Change Pointer table is read and checked if changes were made to important fields , if so the outbound program will be triggered automatically , these have predefined interfaces
ALE/IDOC Transaction
SALE Area Menu for ALE configurations.It includes transactions for
Logical System definition and linking it to a client, Transactions for
RFC Destination and Port Definition Etc.
SM59 RFC Destination
Here we specify the login settings for the destination including
the I.P address or Application Server name and the User name and
password.The information entered here is used to run Remote Function
Calls(RFC ) on the destination server .We can create number of types
of RFC Destinations but 3 types are important .
R/3 (R/3 to R/3), LS(logical system) and TCP/IP.
The name of the RFC destination should be same as that of Logical
System as it helps in creation of automatic partner profiles.
WE21 Port Definition.
There are 6 types of ports but only 2 types File and Transactional RFC
types of ports are important.
We have to specify the RFC Destination before a port can be created.
WE57 This is used to assign the Inbound function module to the Message Type
and to the IDOC Type.
WE42 This is used to define the process Code for Inbound Processing.
BD95 Define Filter object type .We can specify the field and the table it belongs
to as a filter object .
BD59 Assignment of Filter object type to the Message Type .Here we create the
link between Filter object and the segment and the message type and the
segment Field.
BD50 Set message Type to reducible.
BD65 Define Mandatory Fields.
BD64 Distribution Model . Also known as Customer Distribution Model Used to
define all the messages that will be exchanged between remote systems
and the name of thes logical systems. Any filters can also be specified.
The model once created has to be distributed on every system which will
be communicating ,It can be maintained on only One system.
BD21 Creating IDOcs from change pointers.
This can be used to create IDOCs from change pointers for a particular
message LIKE MATMAS.
BD22 This can be used to delete change pointers.
BD87 Status Monitor. Idocs can be selected base on number of criteria and there
processing status can be seen in detail.
BD10 Material Master Data Distribution .
Based on Message MATMAS.
BD12 Customer Master Data Distribution .
Based on Message CREMAS.
BD14 Vendor Master Data Distribution
Based on Message DEBMAS .
BDFG Generate ALE Interface for BAPI.
Here we specify the Business Object and the BAPI Function module for
which the interface has to be created.
WE31 Segment Editor.
This is used to create segments. We create the segment type and
segment definition is automatically created by editor e.g. Z1DUMMY is
segment type and Z2DUMMY is the segment definition .We specify the
fields and the data elements these cp\orresponds to create segments.
WE30 IDOC Editor
It is used to create a new IDOC Type or IDOC Extension .We specify the
segments that will be addd to the IDOC type.
WE02/05 IDOC List.
Various selct options and parameters are provided to select IDOCs
depending on the date, direction , mesage type etc.
WE20 Partner Profile
Here we create partner profile for each and every partner from / to which
the messages will be exchanged.There are 6 types of PF generally only
profiles of type LS(Logical System) ,KU(Customer) ,LI(Vendor) is used.
We specify the partner number and partner type and the agent and
the agent type responsible for handling of errors .
For every message send to the partner we have a outbound record and for
evry message coming from the partner we have the inbound record .
We specify the message in the otbound/inbound records ,double
clicking will take us to the detailed screen where the IDOC Type ,Port
and whether the IDCO will be immediatelt processed or collected are
mentioned.
Steps relate to idoc
Creation of IDoc
To Create Idoc we need to follow these steps:
1)Create Segment ( WE31)
2)Create Idoc Type ( WE30)
3)Create Message Type ( WE81)
4)Assign Idoc Type to Message Type ( WE82)
Creating a Segment
a)Go to transaction code WE31
b)Enter the name for your segment type and click on the Create icon
c)Type the short text
d)Enter the variable names and data elements
e)Save it and go back
f)Go to Edit -> Set Release
g)Follow steps to create more number of segments
Create IDOC Type
a)Go to transaction code WE30
b)Enter the Object Name, select Basic type and click Create icon
c)Select the create new option and enter a description for your basic IDOC type and press enter
d)Select the IDOC Name and click Create icon
e)The system prompts us to enter a segment type and its attributes
f)Choose the appropriate values and press Enter
g)The system transfers the name of the segment type to the IDOC editor.
h)Follow these steps to add more number of segments to Parent or as Parent-child relation
i)Save it and go back
j)Go to Edit -> Set release
Create Message Type
a)Go to transaction code WE81
b)Change the details from Display mode to Change mode
c)After selection, the system will give this message The table is cross-client (see d)Help for further info). Press Enter
e)Click New Entries to create new Message Type
f)Fill details
g)Save it and go back
Assign Message Type to IDoc Type
a)Go to transaction code WE82
b)Change the details from Display mode to Change mode
c)After selection, the system will give this message The table is cross-client (see d)Help for further info). Press Enter.
e)Click New Entries to create new Message Type.
f)Fill details
g)Save it and go back
Look at these links
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
Just follow the procedure
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
STEP 1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
-System Name : ERP000
-Description : Sending System
-System Name : ERP800
-Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
-Client : ERP 000
-City :
-Logical System
-Currency
-Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive
to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
STEP 3) Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
STEP 4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
STEP 5) Goto Tcode BD64
select the modelview
goto >edit>modelview-->distribute
press ok & Press enter
STEP 6) goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
STEP 7)goto Tcode : BD11 for Material Receiving
Material : 100-300
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
vasu -
Material for ale,idoc programming
Hi folks,
i need urgently the material for IDOC programming.i am mentioning the process below.
1)i have created one program. i need to send some fields to a folder through IDOCS.
when i will press a push button on my program, this idoc program should execute so that some of the fields will transfer through IDOCS.
Thankshi,
Intermediate Documents (IDOCs)
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data.
The two available process for IDOCs are 1) Outbound Process 2) Inbound Process.
There are basically two types of IDOCs.:
1. Basic IDOC type defines the structure and format of the business document that is to be
exchanged between two systems.
2. Extension Idoc: Extending the functionality by adding more segments to existing Basic IDOCs.
-To Create Idoc we need to follow these steps:
1. Create Segment ( WE31)
2. Create Idoc Type ( WE30)
3. Create Message Type ( WE81)
4. Assign Idoc Type to Message Type ( WE82)
1. Creating a Segment:
nGo to transaction code WE31
nEnter the name for your segment type and click on the Create icon
nType the short text
nEnter the variable names and data elements
nSave it and go back
nGo to Edit -> Set Release
nFollow steps to create more number of segments
2. Create Idoc Type (WE30)
nGo to transaction code WE30
nEnter the Object Name, select Basic type and click Create icon
nSelect the create new option and enter a description for your basic IDOC type and press enter
nSelect the IDOC Name and click Create icon
nThe system prompts us to enter a segment type and its attributes
nChoose the appropriate values and press Enter
nThe system transfers the name of the segment type to the IDOC editor.
nFollow these steps to add more number of segments to Parent or as Parent-child relation
nnSave it and go back
nnGo to Edit -> Set release
3. Create Message Type (WE81)
nGo to transaction code WE81
nChange the details from Display mode to Change modenAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnternClick New Entries to create new Message Type
nFill details
nSave it and go back
4. Assign Idoc Type to Message Type (WE82)
nGo to transaction code WE82
nChange the details from Display mode to Change moden After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
nClick New Entries to create new Message Type.
nFill details
nSave it and go back
There are three types of records :
nControl Record nData Record nStatus Record
Control Record - contains the key information like destination, IDoc type, message type, port and sender information. Control records are of EDIDC type of structure.
Data Records - This contains two parts.
nAdministrative Section and Data Section
nAdministrative Section consists of Idoc number, Segment Name, Segment number, Version, Segment Hierarchy etc.
nData Section contains the data of respective segment
nData records are of EDIDD type of structure
nStatus Record - whenever a process is taken place, system will generate status records.
nWe can identify the process with the number of status record.
n01 - 49 for Outbound Process
n50 - 75 for Inbound Process
nwhen IDoc is processed the messages are:
n01 - IDoc is created
n30 - IDoc is ready for dispatch
n03 - IDoc is processed
check all the below links u will find lot of info
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
http://www.angeli.biz/www5/books/IDocBook/IDocBook.pdf
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
~~Guduri -
Hi All,
I have a scenario where i have to replicate user master record from one server to another through BAPI ALE IDoc.i have some standard info available
message type:- USERCLONE
Object type:- USER
Method:- CLONE
IDoc Type:- USERCLONE05
FM for outbound:- ALE_USER_CLONE
FM for Inbound:- IDOC_INPUT_USERCLONE
With this much of information i dn't knw how to proceed further.
i have created Distribution Model, added BAPI, created partner profile.
Now i don't understand how the data will be uploaded into IDOC, how BAPI will read the data.. If some sample Program is available which will help in firing the BAPI, then provide me the link..
It's urgent.. Useful results will be rewarded.
Thanks.
Please help me with the required steps..hi,
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf -
Hi All,
I have a scenario where i have to replicate user master record from one server to another through BAPI ALE IDoc.i have some standard info available
message type:- USERCLONE
Object type:- USER
Method:- CLONE
IDoc Type:- USERCLONE05
FM for outbound:- ALE_USER_CLONE
FM for Inbound:- IDOC_INPUT_USERCLONE
With this much of information i dn't knw how to proceed further.
i have created Distribution Model, added BAPI, created partner profile.
Now i don't understand how the data will be uploaded into IDOC, how BAPI will read the data.. If some sample Program is available which will help in firing the BAPI, then provide me the link..
It's urgent.. Useful results will be rewarded.
Thanks.
Please help me with the required steps..Hi All,
I have a scenario where i have to replicate user master record from one server to another through BAPI ALE IDoc.i have some standard info available
message type:- USERCLONE
Object type:- USER
Method:- CLONE
IDoc Type:- USERCLONE05
FM for outbound:- ALE_USER_CLONE
FM for Inbound:- IDOC_INPUT_USERCLONE
With this much of information i dn't knw how to proceed further.
i have created Distribution Model, added BAPI, created partner profile.
Now i don't understand how the data will be uploaded into IDOC, how BAPI will read the data.. If some sample Program is available which will help in firing the BAPI, then provide me the link..
It's urgent.. Useful results will be rewarded.
Thanks.
Please help me with the required steps.. -
Regarding ALE/Idocs PDFs & complete Documentation & Step by Step Procedure
Hi Gurus,
Iam working on Netweaver XI and i need some PDF's on ALE/Idocs.
1. How to create and send a custom idoc?
2. Serialization of idocs?
3. Archiving of idocs?
4. Idoc Acknowledgement?
5. How to send multiple Idocs at a time?
6. Idoc Sheduling?
7. Idoc bundling and Packaging?
8. How to Debug a Idoc?
For the above questions i need complete procedure and Pdf's upon these and send me some FAQ's on them.can any one send me the details plz very urgent.plz send Especially pdf's. My id is ajaykodali22 at the rate of gmail.com
Thanks & Regards,
ajay kodali.Hi,
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards,
Shiva. -
Hi,
For exchanging data between two systems(not between two clients of the same system) using ALE iDoc , logical systems should be maintained in both the systems?
For eg: there are two systems, system A and system B.
i have maintained the logical systems as SYSA (for system A) and SYSB ( for system B) in the system A using the transaction 'SALE'. Should this need to be maintained in system B also?
Thanks & Regards,
Soumya.Hi,
In both the systems you have to Define the Logical systems,
but in you assign only one to the client,
i.e. in system A you assign the Logical Sytem of of A to the Client in SALE
transaction the same goes for B.
and you don't need to create a distribution model for both the systems,
you can create it in one system and send it to the other system.
Regards,
Samson Rodrigues.
Maybe you are looking for
-
Magic Trackpad...Jerky Zoom in Safari 5.0.1
I was hoping that the two finger zoom would work well in Safari 5. Unfortunately it zooms in a jerky step fashion.....Unlike Photoshop CS4 where it is silky smooth. So why can't Apple implement a smooth two finger zoom in two of it's otherwise really
-
Is this a defect on my iPod?
I bought an iPod as a Christmas gift for myself, and when I opened it on Christmas day, I immediately put on an Invisible Shield because of how "scratchable" the iPod is. I let it dry for a full 24 hours. Then I charged it through my computer. I adde
-
Will upgrading to Office 2007 SP2 cause any problems with syncing?
I've got to figure this question has been addressed somewhere, but searching for "2007 sp2" found no topics... So Microsoft's got Office 2007 SP2 available for download now. One of the highlighted changes is speedier Outlook performance which I'm anx
-
Hello Blackberries. Console mode is requested to re-adjust the configurations(s) and start-up application(s). Regards..
-
Query error - with filtering records
Hi. I have a gallery that shows 9 records at a time, which you can then move on to subsequent pages. I added filters to narrow down the record search, however, I am receiving query errors. This is my code: <!----- This is setting the initial defaults