ALE IDocs are not coming on Recieving System

Dear Experts,
I am sending Characteristics from my QA Server to PRD server. QA systems send the IDocs and Status in WE02 comes as 03, but i am not able to see the IDocs in PRD system. There WE02 shows 'No IDocs selected'. I have seen SM58 also in QA which shows message 'No authorization to send IDocs with message type C HRMAS'. Please guide me how to come out of this. Is this an authorization problem or any settings issue.
Thanks and Regards,
AKT

Hi,
As your problem says that you dont have otherization to create IDoc in the receiving system.
Check the RFC Destination created in QA (SM59).
Enter Logical system name of PRD.
Check the remote login username and password.
Now Click on the remote login available at the top.
I'm sure that it is a problem with the username and login that used in the creation of RFC Destination.
If that is the case, Ask the basis person to enter a valid username and password to access the PRD system.
Regards,
Sunil.

Similar Messages

Outbound IDocs are not visuible in Middleware system(SeeBeyond)

Hi Experts,
We need need your expertise help on this issue.
Issue:
The Outbound IDocs which are in status 12 in SAP system are not visuible in Middleware system(SeeBeyond) for customized message type( forecast -ZFOSHT)
If we create a IDoc by using customized program, IDoc(eg.0000000012345678) is successfully created and the status of IDoc is 12. but not visible in Seebeyond.
but If we are re sending the same IDoc(0000000012345678) through WE19(IDoc creation) without changing any thing,the newely created IDoc reached to the Seebeyond.
Please look the issue and help me on this.
Raghavendrarao.R
+91 9739006564

Hi,
After your Function module for IDoc creation either it is Z function module or standard one "MASTER_IDOC_DISTRIBUTE" write these
CALL FUNCTION 'DB_COMMIT'.
CALL FUNCTION 'DEQUEUE_ALL'.
COMMIT WORK.
This should solve your problem.

Why IDocs are not arrived from Source System

Hi all,
Now a days we are facing regular problem to load master data?
We are getting Error Message - "No Idocs arrived from the Source system".
I need to know, Why this error will be occurred?
Is there any reason for this Docs are not arrived from the Source System?
Please help me to analyze this error, why its happened regularly? what could be possible reasons for this error?
Its very urgent, please help me as early as possible.
Thanks in Advance. I will asign the points for relevent answers.
Regards,
Sudharsan Reddy.

Hi ,
SOME OF THE CHECKS:
1.You can check the RFC destination using the transaction SM59 in the system. Then do Test connection and this should not cross more than 1000ms. The connection should establish within 1000ms.
If it crosses more than 1000ms the tRFC entries will not be cleared fast.There will not be any job to push Transaction recorded entries it will go through SMD(Shared Master Data) Tool.
So if it crossed more than 1000ms, then you can ask your Basis team to check the network connectivity b/w R/3 and BW system.
If there is no serialization for these IDocs then you can use button F6 to process these entries in tRFC manually.
2.Go to SM58 and check the LUW .If any error ..then selecting the failed Idoc, click edit in the menu and execute LUW.
3.If there are many Idocs with status red then check the system performance also. If performance os the system is bad then, we can put the mail to basis guys they will check and restart the BW system. (or) it may be due to problem in the coding,since data transfer is taking long time.
4. Some times it may be due to much parallel process at the info package level and make the Max parallel process into one process in RSCUSTV6, save and run the infopackage. This may be due to space problem.
( Or )sbiw>general settings>maintain control parameters for data transfer. Both in BW and R/3 we configure in the same way.
There we need to give
1.source Sys name
2.Maximum KB in one data package.
3.Maximum lines in one data package.
4. Frequency (specifies after how many no. of data records, status record should be sent)
5. Max processes ---Reduce the number process, save and try.
6.Target Sys name.
Regards,
Dhanya.

IDOC in 03 staus but not coming to PI system..

Hi Experts,
I am working on IDOC to IDOC scenario.All of the IDOCs are in 03 status in R/3 system but some of the IDOCs are not coming to PI system.I checked SM58 also but its fine.
Should it be in 12 staus?
Is it possible that IDOC in status 03 can reach to the target system?
Please reply it asap.Its urgent.
Regards,
Vikram

Hi Vikram,
First of all, bd75 is only for status conversion. This means, that only IDoc statuses are changed, based on the status of the RFC call. IDocs are not despatched again by this transaction.
Secondly, you might want to check the EDI Port that is assigned in the partner profile, if it is pointing to the correct target system.
Finally, if target system is OK and you don't find anything in sm58 in sender system, then you should go to smq2 in PI and you should find your IDocs there, waiting in a blocked queue.
Hope this helps,
Greg

In rz20 all file systems are not coming.

Hi all.
I have ccms configuration in local system not in central system menas every system there are own ccms configuration.
File system In rz20 that all file systems are not coming.
in os level there are like sapdata1,sapdata2.... & sapreorg but these file system are not coming in rz20.so we are not getting any alert regarding this file systems.
Kindly suggest how can i fetch all the file system which are available in os level.
thanks in advance.
Thanks & regards,
Laxmid

Hi Kumar,
Os -HP Unix
In *RZ0> SAP CCMS Monitor Templates>Filesystems--->* these below file systems are not coming.Otheres are coming.
/oracle/RXN/sapdata1
/oracle/RXN/sapdata2
/oracle/RXN/sapdata3
/oracle/RXN/sapdata4
/oracle/RXN/oraarch
/oracle/RXN/sapreorg
& please tell me there is one Lock & unlock is there in front of every node.what is this.
Thanks & Regards
Laxmi
Edited by: laxmid on Feb 7, 2010 9:04 PM

Delta changes in R/3 sales document are not coming into CRM

Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PK

Hi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna

Sales order are not coming in FS10N ?

Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit Arora

Did you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?

When I send a text message from my iPhone response only comes back to my iPhone . If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes. Responses are not coming to both anymore! Please help?

When I send a text message from my iPhone response only comes back to my iPhone . If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes. Responses are not coming to both anymore!

On both devices when you go to settings>messages>send and recieve how are poeple contacting you on each device?. e.g. email or mobile number.

Message Not coming to XI system

Hello,
Am Facing an issue in Production XI system. The issue is in File to RFC Interface,which is running on Daily basis,there is a daily job to Place the File on FTP server. The Problem is File is Picking by XI and File also archived in Archive directory,but Message not coming to XI system.I have checked in MONI and Sender communication channel,but not able to see any messages.The File Format is CSV,used FCC in sender channel.
Kindly help me to solve this problem,
Thanks,
Madhu

Hi Madhu
Please check the communication channel in RWB and see the channel is in error or not.
The channel should show some logs including message id.
Next check the RWB-->message monitoring-->adapter engine
The message could have failed there and hence does not present in MONI.
Finally make sure that none of other communication channels are polling in that same server.
In non-prod environment we some times use the same server credential for DEV and QA.
So if that is the case , then please deactivate the other channel so that you get the message in desired environment.

Tables are not coming to oracle model from sqlserver 2000 while using OMWB

Hi,
I am using oracle migration workbench to migrate SQL Server 2000 to oracle 9i. When �capture source database and create the oracle model� is run. only tablespace and users coming to Oracle model from sql server. Table are not coming. These table are owned by dbo in sql server and
All other users in the database has full privilege on this tables. Do I need to some setup to get this tables
In oracle model.
Thanks
Harish

Try the following
|| This script sets the "dbo" to have the "sa" login.
|| NOTE: Server settings for the SQL Server instance must be set to
||"Allow modifications to be made directly to the system catalogs".
|| This is found under Server Setttings tab for server properties.
UPDATE sysusers
SET sid = (SELECT sid FROM master..sysxlogins WHERE name = 'sa')
WHERE name = 'dbo'

The prices are not coming automatically

Hi gurus,
In batch determination. When i am creating a sales order the batch number is coming automatically. But the thing is the prices are not coming automatically. what could be the reason. Even though i maintained the prices conditon records in vch1 but the system not picking up automatically. Please give the solution. It is urgent
Thanks & Regards
cheers

Hi,
Batch valuation is possible with the std functionality.
It will allow to valuate each batch saperately.
More information,
http://help.sap.com/saphelp_46c/helpdata/en/61/969838e914a20de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
Valuation for a Single Batch
Use
You use valuation for a single batch if you want to separate costs for externally processed batches from costs for internally processed batches, and if you want to keep the price and value of each individual batch in inventory management on a value basis.
Integration
Valuation for a single batch is carried out using separate values, just as partial stocks for a material are distinguished according to origin, for example. In valuation for a single batch, a separate characteristic category is created for each batch (batch number = characteristic category).
Valuation for a single batch is a special kind of valuation type for batches.
Prerequisites :To work with valuation for a single batch, you must choose valuation for a single batch (indicator X in the standard system) as substance characteristic type in the material master record.
regards,
Siddharth.

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
    GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
    REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
    REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
    REPLACE '&' WITH GS-COUNT            INTO GS-TEXT.
    REPLACE '&' WITH GS-LINES            INTO GS-TEXT.
    CONDENSE GS-TEXT.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
         EXPORTING
              MATNR        = <MATNR_WERKS>-MATNR
              WERKS        = <MATNR_WERKS>-WERKS
              MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
    GS-COMMIT = GS-COMMIT + 1.
    IF GS-COMMIT >= 100.
      GS-COMMIT = 0.
      COMMIT WORK.
    ENDIF

Business Process Graphics are not coming in SOLMAN 3.2

Hi,
In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
The link is as follows...
http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
&_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
6FDB14188B4313543C5393E
I have checked sap-bc-solman-defaultuser-graphicdata is activated.
Please suggest.
Thanks & Regards
Mrutyunjay

hI,
Go to vtlf copy controls in item data vbrk/vbrp give 001 try this it my work out.
Best regards,
venkataswamy.y

Yeild and Activity Types are not coming on confirmation

Dear Sir's
Hope everyone fine by the grace of GOD.
Friends i am facing a problem while doing Confirmation of production order in T.Code Co11n .Yeild(net production) is not picking from the Production order and also Activity types are not coming while doing confirmation.
please help me out in this problem
Best Regards,
HAFIZ ABDUL HASEEB KHAN
SC.PP Consultant

Dear
There are 3 possibilities to populate the activity and yeild field:
1) The system can propose them based on quantity, using the standard
formula, directly after entry of the operation being confirmed please check it in your order first
2) The system can propose them at the time of saving
3) They can be manually entered ~ however using this option, formula
will not recalculate using the settings from the Standard value key,
set for the work centre.
To set one of the above as default in customising, follow these steps:
- Call transaction OPK0
- Select the default Confirmation Profile SAP001 is being ticked marked. - Default Values , Qty and Service in OPK0
- Select the Default tab and set the default for Quants and Services
to 'Immediate Proposal' or 'Propose When Saving'
These options allow you to choose whether the activity and yeild proposal in
C011N is given immediately after entry of the operation to be
confirmed or upon saving the confirmation. However note that if
you subsequently override these proposals by maually entering activity
details, the formulae will not be recalculated and manually entered
data will take presidence.
Hope this is clear
Regards
JH

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

ALE IDocs are not coming on Recieving System

Similar Messages

Maybe you are looking for