ALE of BNKE data from FI to HR

Hi all,
I want transfer BNKE data from FI to HR box, so infotype 0009 can see the same. Is there any message type for me to ALE everyday.
What is the best approach.
Thank you for your time and help.
Regards,
Vince.

Hi Vince,
i'm not sure, because i have only a basis system at the moment.
I think there is no message type but a BAPI ("Bank" with method "SaveReplica"), that you could add to your distribution model.
Hope this helps.
Regards
Bernd

Similar Messages

ALE-Cost Center Data from ERP to HR

Hello,
I used BD64 to set message type COSMAS/COSFET.
I used BD16 to transport cost center from ERP client to HR client, it succeeded.
My question is...
When I create/change cost center on ERP client,
are there any setting that ALE could be triggered automatically after I press SAVE button.
Thanks!
Regrads.

Hi Vince,
i'm not sure, because i have only a basis system at the moment.
I think there is no message type but a BAPI ("Bank" with method "SaveReplica"), that you could add to your distribution model.
Hope this helps.
Regards
Bernd

Upload data from legacy system to SAP through ALE IDOC

Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
Thanks

Hi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid

ALE, use bd79 (converting data from sender to receiver to blank out fields)

Hi, I am trying to blank four fields out in our FI IDOC for a certain business reason. These fields must be blank (it is the FIDCC1 message type). I am trying to use transaction bd79 (converting data from sender to receiver) maintain rules. Is there a way to blank out these fields using a conversion rule? I can change data fine but I cannot find a way to blank or null a field out. Thanks in advance.

You should have a look at the inbound function module (linked to your inbound process code). sometimes there are checks that if fields are initial that nothing will be changed.

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. <b>don't forget to relaese it</b>
create idoc using above segments using we30 <b>don't forget to relaese it</b>
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

Unable to extract data from R/3 into BW 3.5

I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wrong......below are the steps that I have done
For loading transaction data from R/3 in ODS
1. Created view from VBAP and VBAK tables in R/3
2. Created Transaction type DataSource in R/3 using RSO2 transaction
3. Replicated above DataSource in BW under Source Systems. using 'Replicate DataSource'
4. Created ODS object along the same lines as the above created view in R/3
5.Created InfoSource and assigned the replicated DataSource
6. Activated the Transfer Rules, Transfer Structure, Communivcation Structure
7. Created Update Rules for ODS and activated them
8. Created InfoPackage and started the Data Request
The error message that I see in Monitor is as below
Requests (messages): Everything OK
         Data request arranged
         Confirmed with: OK
Extraction (messages): Missing messages
         Missing message: Request received
         Missing message: Number of sent records
         Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
         Request IDoc : IDoc with errors added
Processing (data packet): No data
I am getting the same error message when I try InfoCube instead of ODS.
Please let me know what is wrong
Vidya

I checked the 'Details' and 'Status' tab page in Monitor
On Status Page it says
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
On Details Tab page, it says
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : IDoc with errors added
Processing (data packet): No data

Using ale u can send from sap to sap and sap to non sap systems

hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDI

Hello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:)

Reg:when i was uploading data from legacy system

Hi All,
it is any Include program
for tcode mpr1
when i was upload the data for forecast values from
legacy system to sap system .
only one record is geting updated
other records are not updateding
i have retun logic like this
code,,,,,,,,
TYPES: BEGIN OF TY_FILE,
        WERKS LIKE MAPR-WERKS,
        MATNR LIKE MAPR-MATNR,
        PRWRT LIKE PROW-PRWRT,
       END OF TY_FILE.
DATA: IT_FILE TYPE STANDARD TABLE OF TY_FILE,
      WA_FILE TYPE TY_FILE.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE,
       IT_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
DATA : LV_FILE TYPE STRING.
LV_FILE = I_MPR1USERPAR.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
    FILENAME                = LV_FILE
    FILETYPE                = 'DAT'
    HAS_FIELD_SEPARATOR     = 'X'
CHANGING
    DATA_TAB                = IT_FILE
EXCEPTIONS
    FILE_OPEN_ERROR         = 1
    FILE_READ_ERROR         = 2
    NO_BATCH                = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE            = 5
    NO_AUTHORITY            = 6
    UNKNOWN_ERROR           = 7
    BAD_DATA_FORMAT         = 8
    HEADER_NOT_ALLOWED      = 9
    SEPARATOR_NOT_ALLOWED   = 10
    HEADER_TOO_LONG         = 11
    UNKNOWN_DP_ERROR        = 12
    ACCESS_DENIED           = 13
    DP_OUT_OF_MEMORY        = 14
    DISK_FULL               = 15
    DP_TIMEOUT              = 16
    NOT_SUPPORTED_BY_GUI    = 17
    ERROR_NO_GUI            = 18
    OTHERS                  = 19
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_ARTICLES.
    CLEAR : IT_MARA,IT_MARC.
    SELECT SINGLE * FROM MARA INTO IT_MARA WHERE MATNR = T_ARTICLES-MATNR.
    SELECT SINGLE * FROM MARC INTO IT_MARC WHERE MATNR = T_ARTICLES-MATNR
                                             AND WERKS = T_ARTICLES-WERKS.
ENDLOOP.
LOOP AT IT_FILE INTO WA_FILE .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_FILE-MATNR
    IMPORTING
      OUTPUT = WA_FILE-MATNR.
T_FORECAST_VALUES-WERKS = WA_FILE-WERKS.
T_FORECAST_VALUES-MATNR = WA_FILE-MATNR.
T_FORECAST_VALUES-PERKZ = IT_MARC-PERKZ.
T_FORECAST_VALUES-ERTAG = T_ARTICLES-PRDAT_NEW.
T_FORECAST_VALUES-KOPRW = WA_FILE-PRWRT.
T_FORECAST_VALUES-MEINS = IT_MARA-MEINS.
APPEND T_FORECAST_VALUES.
CLEAR : T_FORECAST_VALUES.
ENDLOOP.
thanks
mars

For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas

How to configure RBE in order to get data from a SAP System

Dear all,
I downloaded the last version of RBE in order to install it and evaluate the concept of Reverse Business Engineering.
After installing it on my laptop, I try to access with no exit. It appears a log on screen.
Someone can help me by explaining how to set first steps in order to connect with a system?
Thanks in advance, Xavier

Hi Gopi,
Here I enclose the steps for sending data from a SAP R/3 system to Non-SAP R/3 thru ALE.
Here my Non SAP System is - Web Methods.
1.Creating LS - 1. SAP R/3 -              S1_800
                         2. web methods LS - WM_800
2. ASSIGN CLIENTS TO LS - S1_800 TO 800
3.     DEFINE TARGET RFC DESTINATIONS -
    3.1.   TCP/IP Connection -          RFC DEST NAME -WM_800
                                         Connection Type - T
                                          Applicataion Type - Registered server proggram
                                                PROGRAM ID - WMB2B1
                                         Gateway Host - Sap Server Name
4.0. Model View Name - W_M_V (for sending data to IS)
                                         sender - S1_800
                                        receiver - WM_800
                                        message type - MATMAS
      4.1. Create Partner Profiles.
5.     Create PORT - TCode - we21
          5.1. For Wem Methods system - WM_PORT
                  RFC Destination Name - WM_800 (created in step 3.1.)
With Regards
Vasu

Uploading data from Legacy System to SAP (In PS Module)

While Implementing Project system Module, Whether LSMW is applicable for uploading data from Legacy sytem. If not, then what is the method used for uploading the data from Legacy sytsem to SAP

For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas

Replicate data from one client to another in a production system

Hello,
I have two client in production system. Whenever a equipment is created in one client it should be replicated in another client and whenever a equipment is changed in one client the changes should be replicated to another client.
Data should be immediatly replicated to the another client.
Can basis do some setting so that the two client will always have the same data for equipments.
or i have to get the data from one system and send it to another system through idoc and update that data in another system. This will take a lot of time.
or is there any easy way

Hi Sachin,
You need custom program to achieve this requirement. Either you can use ALE+IDoc or direct BAPI function module call.
This should happen within seconds if designed properly.
Regards,
Avinash

Is it possible to migrate data from a 4.6C system to an ECC 6.0 system?

Hello all,
We have an ECC6.0/Oracle 11g system which runs Finance, Purchasing and Payroll/HR for our own organisation.
We also have another 4.6C/Oracle9 system where we run only Payroll for another organisation.
This is a separate landscape (Dev / Test / Prod / DR) which runs on its own hardware.
Clearly, this 4.6C system has to be upgraded in the next 12 months or so before it is out of maintenance.
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
In this way, we can decommission the 4.6C hardware and simplify our landscape.
Has anyone undertaken a similar exercise who would be willing to share their experiences?
Or does anyone have any opinions as to whether this would even be possible?
Our initial thinking is that we would probably have to write our own conversion programs and/or possibly use LSMW but it's early days so any feedback is welcome.
Regards...John

Hi,
However, we are exploring whether it would be possible to migrate the data from the 4.6C system to our existing ECC6.0 system instead of upgrading the 4.6C system.
You can make of ALE/IDOCs technology to transfer the required data from 4.6C system to ECC 6.0 system. Here you will need to perform necessary mapping of the fields and perform required technical configuration. Later write ABAP codes to fetch and transfer data .
Hope this answers your query.
Regards,
Deepak Kori

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Problem While loading Master data from R/3

Hi All,
When i am trying to load masters data from R/3 datasources to BW Info objects in Info provider menu data is coming to PSA but going to dta targets. the data is matching with the data in R/ 3 but
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Info IDoc 1 : sent, not arrived ; IDoc ready for dispatch (ALE service)
and error message says ERROR 4 in the update.
Can you please help me in this regard . Its Urgent.

Hi,
Check for pending IDOCS in BD87 or SM58 and execute them.
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Refer this Tcodes for IDOC status.
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE23 Verification of IDoc processing
IDOC
www.erpgenie.com/sapgenie/docs/ale_whitepaper.doc
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
Thanks,
JituK

Transfer of data from SAP ECC 6.0 to E-Recruitment

Hi,
We are implementing E-recruitment . SAP ECC and E-Recruitment are running in different servers.How to transfer data from following Infotypes from SAP ECC 6.0 to E-Recruitment .
IT0002 Personal Data to 5102 Candidate Information
IT0006 Address Data to 5110 Address Rule
IT0105 Communication Data to 5110 Address Rule
IT0022 - Education to 5104 - Education
IT0023 Others/Previous Employers to 5103 - Work Experience
IT0024 - Qualifications to 5105 - Qualifications
Regards,
Somi .

Hello,
in general IT5103, 5104 and 5105 are not part of the standard distribution model. Without special customer own ALE development you will not be able to transfer these information.
Check SLG1 - application log for entries.
did you the initial data upload or did you only transfer changes?
If you did the initial data transfer be sure the user running the IDOC import has the correct rights. Be sure noone changed the usage of IT0000 STAT2 as e-recruiting expects value 3 for active employees. Furthermore be sure to be informed about the handling of hirings in future.
If you only wanted to transfer updates. PFAL is not the right way. Be sure you activated the change pointers correctly. Use RBDMIDOC. And be sure to implemet the latest Notes. There had been an error that changes were only processed in e-recruiting if at least IT0000, 0001 and 0002 were changed which resulted in problems when only IT 0006 was updated. In this case the update was not transfered to e-recruiting.
Best regards
Roman Weise

ALE of BNKE data from FI to HR

Similar Messages

Maybe you are looking for