ALE settings error   "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

Similar Messages

  • Too many recipients found for message type in the ALE model

    Hello Friends,
                            Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP  .
    In the distribution model i have defined the sender receiver and message type clearly...
    But  in va01  after creating sales order  extras ->Output->Hearder --->Edit
    Output type-- BA00
    medium --ALE
    Dispatch time : Send Immediately
    I am getting a error -
    Too many recipients found for message type ORDRSP in the ALE model
    Message no. B1130
    Diagnosis
    In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
    Procedure
    Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
    Please help me in solving this error.
    Regards,
    jeevan

    Hi Jeevan,
    In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
    Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
    select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
    Under the node ORDRSP, add the filter group for Customer.
    Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
    Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
    Hope it solves your Issues.
    Regards,
    Anbalagan.

  • Too many recipients found for message type ORDERS in the ALE model

    Hi all ,
    please help me to solve this issue .
    i done with ale settings .
    orders message type is used in 2 different model view for 2 different systems
    when i create po it is giving error in output  "Too many recipients found for message type ORDERS in the ALE model"
    how can i rectify this error.
    Thanks

    > orders message type is used in 2 different model view for 2 different systems
    do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
    if yes, then use a single model view with noth receiver systems defined in it.
    if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
    or u can use diff versions of the orders message type...
    say orders05 for one.... receiver and orders02 for another one....
    hope this helps!!
    Cheers!!
    Sidharth

  • Too many recipients found for message type (Distribution model)

    Hi,
    I wanna send Dilvery note using message type DESADV from a SAP system to another non-SAP System.
    I have Created port partner profile and distribution model.
    But the Problem is the same message type DESADV is used to send Dilvery from SAP System to another SAP Client.
    Idoc getting failed and throwing error stating ‘Too many recipients found for message type DESADV in the ALE model ‘.
    I am sure we can create the more than one recipients for same message types. I have done it some time back. Any help highly appreciated.
    Regards
    Raj

    This message pops up when SAP can't identify how to distribute the IDoc based on the settings in BD64. Take a look at the settings there, most likely you'll need to add a filter.
    The big ALE/EDI/IDoc book suggests that the same IDoc may be distributed to 2 different systems but specific details are not clear. It seems that one system should be configured first (it does mention a need to use a filter) and then somehow menu Edit -> Model View -> Distribute should be used.
    I've never done it myself though and have only run into that error when I missed some filter settings in BD64. Hope this helps.

  • ALE error  "Too many recipients "

    Hi all ,
    please help me to solve this issue !!!!!!!!
    i done with ale settings .
    in the bd64 , orders message type is used in 2 different model view for 2 different systems
    when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
    how can i rectify this error.
    Thanks

    Hi,
    Please refer the link below:
    http://www.jt77.com/CRM/related-discussion-6255.html
    Thanks,
    Sriram Ponna.

  • ALE with BAPI; No recipient found for message type

    We have to send sales activities from an ECC-system to CRM and tried to do this with message type SFADPSA and Idoc SFADPSA01.
    When adding this message type to the distribution model (transaction BD64) we got the SAP-message to use a BAPI instead:  IF1037SR with method RECEIVEPARTNERSALESACTIVITY. So we did.
    To trigger the Idoc, we customized an output type, with transmission medium ALE, program RSNASTED and processing ALE_PROCESSING.
    When processing the output type we get an error B1 129: "No recipient found for message type SFADPSA in the ALE model".
    Analysing the error I found out following: during processing (RSNASTED, ALE_PROCESSING) function module MMODEL_INT_VALID_GET is called. This FM only looks into table TBD05, in which no entry for message type SFADPSA is found.
    However, also function module BMODEL_INT_VALID_GET exist, searching table TBD06.
    This table does contain an entry for the above BAPI and method and would not lead to an error message.
    Obviously this last FM should be called, but this never happened...
    Has anyone a clue?
    Do we use the correct processing code?
    Another message type to use could be SFADSACTIVITY, but this message type has no Idoc type assigned.

    Hello Wolf,
    This error message come while determing the distribution channel.
    This error come from one of below includes. Can you please put a break point and swich update debugging on and check whether the program is populating reuqired parameters to determine the distribution model. by doing this you can understand what is going wrong....
    LBDMOU17
    PCHEAF01
    PCITEF01
    RBDSECOP
    RBDSEGLM
    if you are not able to check this let us know..
    Regards
    Naresh

  • Why won't iTunes burn songs to CD - error: too many songs (even4) for 1 CD?

    I am a huge music lover. Having compiled over 4,000 songs in my library, it is very frustrating and disheartening to be limited to my iPod or my computer to enjoy my library.
    I keep getting the message that my burn list is too large and do I want to record over multiple CD's. If I choose no, I reject my burn request. If I choose yes, nothing happens. Went to trouble shooting. Did everything I could except find and update the firmware "versions", including re-installing the latest version of iTunes and updating my Windows Service Packs. Still same message as before.
    When I tried to modify my preferences, it allowed me to make all the selections, but then would not accept them. Instead I got the message: "An error occurred while udating the default player for audio file types. You do not have enough access privileges for this operation." What is this about, I am the sole owner and operator of this computer - who else would have enough access privileges to anything on it?
    When I run the CD Diagnostics, here is what I get.
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 8250
    iTunes 6.0.5.20
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: MxlW2k (1.1.0.121), Cdr4_xp (6.2.0.113),
    UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (6.2.0.113), pwd_2k (5.3.5.10),
    Video Driver: 128 DDR ATI Radeon 9700 TX w/TV-Out\128 DDR ATI Radeon 9700 TX w/TV-Out
    IDE\DiskWDCWD2000JB-75DUA0____________________65.13G65, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskEPSON__Stylus_Storage_1.00, Bus Type USB
    IDE\CdRomTSSTcorpDVD-ROM_TS-H352C_______________DE02___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomNEC_DVD+RW_ND-1100A____________________108B___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: TSSTcorp DVD-ROM TS-H352C, Rev DE02
    Audio CD in drive.
    Found 13 songs on CD, playing time 73:09 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 06:13:52
    Track 3, start time 11:12:32
    Track 4, start time 16:19:15
    Track 5, start time 20:03:27
    Track 6, start time 26:17:66
    Track 7, start time 31:23:17
    Track 8, start time 35:58:60
    Track 9, start time 40:56:15
    Track 10, start time 45:41:50
    Track 11, start time 57:15:05
    Track 12, start time 64:06:37
    Track 13, start time 68:49:31
    Audio CD reading succeeded.
    Get drive speed succeeded.
    E: _NEC DVD+RW ND-1100A, Rev 108B
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16.
    The drive CDRW speeds are: 4 8 16 0.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: _NEC DVD+RW ND-1100A on CDR media at speed 0X.
    I'm asking anyone who can to help me. Please help an old lady once again enjoy one of her decidedly few pleasures in life - her music. Thanks in advance for either a definitive answer OR anything you might suggest which could possibly advance me closer to a final resolution to my problems.

    Hi AnaHarrison,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    Cheers,
    - Judy

  • In ALE/IDOC Change Pointer using Maintenance order for message Type

    Hi All Expert,
    I am using Maintenace order to send via ALE/IDOC(Change ponters), i need standard message Name for Maintenance Order,

    Hello,
    I'm not sure you're taking the best approch.
    Usually when you need to migrate ISU contracts into an ISU-CRM integrated system, you first migrate everything you need in ISU through the VERY powerful migration workbench available (transaction code EMIGALL), and then you replicate your data to CRM via INITIAL download.
    That's definitely the strategy that will give you the best performance, and less work.
    Kind regards,
    Nicolas Busson.

  • Error in ALE service 29 Could not determine recipients for message type MAT

    Hi Experts,
    While transferring the material using ALE am getting  error 29 ie   'Error in ALE service'  and message is 'Could not determine recipients for message type MATFET'.
    Also i ve recieved the materials with the proper status al the end am getting the above error.
    Kindly help me out.
    Thanks in advance.

    Hi ,
    Status 29 means " partner profile not found " . Please check if the recieving partner is configured properly  in WE20 in sender system.
    Also make sure that the Port and RFC definations are also completed. If the IDoc is manually triggered then please make sure that control record parameters of the idoc are properly filled - if we miss the details ( like wrong port given , wrong basic type for message type - or extended message type ) then also the idoc will fail in status 29 even though the partner profile is properly configured .
    Since your idoc is getting generated i think no issues with BD64 since already interested recipeints were populated in control record of idoc.
    Regards
    Vikas Chaudhary

  • SMTP Error 452 Too many recipients

    We are using Exchange 2007 at a school to send email to parents.  When we send out email to all parents we get an error back from yahoo:  452 Too many recipients.
    We have 34 recipients on the list.
    Is there a way to configure Exchange SMTP outbound to break this up so it only sends to say 10 at a time?
    Thanks,
    Glenn

    Here's more info on the problem after looking at the logs a bit more.
    When we send to yahoo with 34 recipients, the first recipient is accepted and all the rest are rejected as 'too many recipients'.  Exchange then tries again with the remaining users and one more email is accepted.  In our case it does this three times and then hits a case where the first
    yahoo email address is a bad address.  Yahoo comes back with an error for this address and 'too many recipients' for all the others.  It then gives up and does not try to send the remaining addresses.
    Being able to control the max number of recipients per smtp session would be one fix to this problem as I could set it to something like 10 so that even if one recipient is rejected, the others would not also get rejected as having 'too many recipients'.

  • Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

    Safari tries repeatedly to open a page. The page partially opens but then Safari reports that there's something wrong with page and I get an error message. This is happening at too many web sites for one site to be having issues.

    I have a similar problem, Safari cannot load a complet page. It stalls e.g. ["38 of 42"]. sometimes it will complete loading after a long wait. just as often it will never complete the page,
    The same thing happens in chrome and firefox but safari on my iPad works just fine.
    I have the latest version of everything
    I assume there is a system problem but cleaning up permissions does not help

  • I get a "Too many recipients" Thunderbird error msg when trying to send a group email -- how many is too many ? does Thunderbird have a limit?

    My ISP says it doesn't impose a limit on the number of recipients in a group email, BUT still I get a Thunderbird error msg. Why?

    Well, no, because 4 or 5 times a year, someone writes in with pretty much exactly your question because they too have had a message refused with the "too many recipients" warning. We suggest they use a Mailing List and all is well.

  • ALE Settings error: Outbound: LS to KU

    Hi Guys,
    Requirement: send idoc to customer 1000358 (KU)  when user execute a report in R/3
    when user execute report we have written the code for idoc generation using function module
    MASTER_IDOC_DISTRIBUTE. the idoc number is geeting genarated successfully with sy-subrc 0
    although its giving an error in WE02 that:
    IDoc: 0000000003560240 Status 29: Error in ALE service
    Could not determine recipients for message type ZNACPRLST
    its not picking the recepient information of the customer from ALE settings.
    I have added that recepient info forcefully in debug before function module MASTER_IDOC_DISTRIBUTE.
    But again the idoc number is geeting genarated successfully although its giving
    another error in we02 that:
    IDoc: 0000000003560258 Status 37: IDoc added incorrectly
    Entry in outbound table EDP13 not found. please check the partner profile.
    Although i have checked tht the entry exist in above table in se11.
    ALE Settings:OUTBOUND:
    Sender: LS- SP5CLNT210
    Receiver: KU - 1000358
    idoc type: ZPRLST01
    message type:ZNACPRLST
    WE82 assign idoc type with message type.
    Receiver port: SAPOUT (File type & Transfer idoc immediately, RFC destination also there)
    Partner profile:  partner no: 1000358
                      partner type: KU
                      outbound params: message type - ZNACPRLST
                      But nothing i did in message control for outbound process code becoz we are
                      generating the idoc in the report itself by coding.
    Distribution model: i can not create any distribution model. Because recipient system is KU.
                        and therefore no logical system name of recepient. therefore system will
                        not allow to create distribution model unless we have a logical sys name
                        of recipient. And i think as the recipient sys is KU (not LS) therefore
                        no need of distribution model?
    I dont have any configuration for inbound till now. And i believe that doesnt matter
    for outbound trigger.
    Please can anybody tell me what could be the error in ALE settings that sytem is showing?
    Will appriciate any help....
    Thanks,
    Biswajit.

    Hi,
    thanks for your reply.....
    i did exactly in WE20 that i wrote before...
    The file port for EDI system is also perfect otherwise it woudnt work for other standard idocs...right?
    i m tried to retest the same in We19 as well....
    but it is giving the same below error:
    IDoc: 0000000003560240 Status 29: Error in ALE service
    Could not determine recipients for message type ZNACPRLST
    its not picking the recepient information of the customer from ALE settings.
    If I added that recepient info forcefully in iwe19 and retest it again the idoc number is geeting genarated successfully although its giving another error in we02 that:
    IDoc: 0000000003560258 Status 37: IDoc added incorrectly
    Entry in outbound table EDP13 not found. please check the partner profile.
    Although i have checked tht the entry exist in above table in se11.
    Your comments pls...
    Thanks,
    Biswajit.

  • Error In MIGO "Could not determine recipients for message type ACPJMM"

    Dear all,
    At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
    System Diagnosis is as below
    An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
    I have check the ALE Settings in we20 and we21
    and have assigned the following message types under Logical syste Partner Type
    Outbound
    ACPJMM
    MATMAS
    MBGMCR
    RSINFO
    RSSEND
    WHSORD
    Inbound
    ACPJMM
    DEBMAS
    FTDABA
    FTDACO
    FTDACU
    INSPECTIONPLAN_CREATE
    MATMAS
    MBGMCR
    RSRQST
    WHSCON
    I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
    I have checked all settings is SALE and they are Fine.
    This is a single system
    Please help this is really ugrent
    Regards
    Suhail John

    Hi,
    Goto table TRWCA (T Code SE30) and deselect all the checked entries.
    This should solve your problem.
    Regards,
    Priyadarshi

  • Email - too many recipients

    Each month I email out our Parish Newsletter to about 120 addressees.  This month, for the first time, it failed to deliver, returning an error message saying that I am exceeding the temporary limit of the server and that I have too many recipients.  I tried to resolve by splitting into 2 mails of 60 addressees but got same error message
    I can understand the need for anti-spamming techniques, but
    1.  What has changed since last month?
    2.  How temporary is "temporary" ie when will things normailise?
    3.  What is maximum number of recipients I can use during this temporary measure?
    tks
    SD

    I have several groups set up in WLM (I use Windows 7). The sizes range from 6 to over 70. Until very recently I have had no problems sending emails to these groups. However, I have been away for a couple of weeks and since returning have been unable to send to the groups with 70 members. I get  an error message relating to the server of a particular recipient, quoting error message 452.
    On researching this it would appear that the recipient whose address in each case is blocking the sending, is number 50 on the list; implying that WLM has put a restriction on the maximum number I can have in a group. I contacted BT yesterday who said they had made no changes to their operation, and, anyway, they could only speak about using the web based BT Yahoo.
    I received a message  today from BT saying that the problem was "solved". I spoke with them since I tried a test message to one of my groups with 50 recipients - which failed, but when I deleted one person the test message went through.
    A different BT customer service person explained that because of the amount of spam being generated these days, a limit was being put on the number of recipients that could be in a group sent via BT. Their suggestion was that I split my larger groups down to less than 50, but also don't send out emails to two smaller groups within a small space of time. They said that they were "monitoring" the situation but did not commit themselves as to what will happen in the future.
    I am clearly unhappy with this situation and will be contacting BT more formally about it. At least it explains why my (larger) group emails are being rejected. 
    Do BT view these forums?

Maybe you are looking for