ALE Transports overwritting local settings in SD account determination

When sending over ALE transports for SD account determination changes, it is deleting existing entries in the local system. For example we maintain entries for sales orgs that are maintained on the local system, but when we ALE entries for the other sales org, the local entries are deleted. Why?  
This is also happening with international addresses that are maintained on the local box. When we ALE over the English address the international address that was created on the local box is deleted. Any help would be greatly appreciated.
Jocelyn

Dear,
Like MM-FI Integration is done solely by the Finance people, they will ask MM counter part only in some cases....FI-SD integration is done by SD people....you (finance) just need to supply the GL account information.....
Use VKOA to maintain FI-SD integration..
Regards,
Chintan Joshi

Similar Messages

  • Account determination error in FI-MM

    Hi Gurus
    I trying to raise PO requisition in ME21N. Here I am facing couple of issues
    1) If I select the K in account assignment category I can't assign the raw material GL account in account assignment tab  as it falls under balance sheet item.
    2) I have saved the PO with out K in the account assignment category and proceeded to MIGO when the saving the document in MIGO the system showing the rejection as "account determination is missing for Valuation class and for COCD"
    and postings are not reflected.
    I want make sure that all the settings related to account determination are good in OBYC.
    Please advise here
    Kishore

    Hi,
    As you mentioned the below is the error message.
    "account determination is missing for Valuation class and for COCD"
    What is COCD ???
    Is it Chart of Account or else????
    Ravi Polampalli

  • MM role in Account determination

    hii
    What are major MM consultant roles in account determination.??
    Explain in detail...?
    Thanks

    Hi MM Group,
    SAP MM Role in Account Determination :
    This account determination is for MM settings u2013 Rajgeetha
    Account determination is based for combination of valuation grouping code, general modifier/account modifier, valuation class in SAP MM.
    This will be defined for particular transaction event key. Transaction event key will inturn be defined for each movement type of SAP MM.
    Basically GL account are assigned for certain combination of above.
    To put down in flowchart format-
    - Movement type-
    - Transaction event key
    - GL account determination (one debit and one credit)- based on below combination
    - Valuation grouping code (see definition below)
    - Account modifier (see definition below)
    - Valuation class (see definition below)
    SAP will see transaction is made in MM, it searches the transaction event key from movement types. Based on valuation grouping code, account modifier and valuation class, determination will be done for GL account for debit and credit.
                                                        Some definitions and assignments
    1) SAP MM Valuation grouping code: It is maintained as part of plant configuration same for all plants within company code having same chart of account.
    This will be applicable only if valuation control is active for organization
    2) SAP MM Account modifier: This is defined in each movement type. There may be more than one account modifier per movement type based on combinations of different special stock, movement indicator, consumption type.
    3) SAP MM valuation class: This is maintained in material master. Material type is taken from material master. Account category reference is taken from material type which in turn is assigned to valuation class. GL account are assigned to valuation class
    Example:
    Material 1016101 is received in stock for plant SEPC by movement 101 in SAP MM.
    1) Valuation class determination from material master of 1016101.
    2) Valuation grouping code determination based on plant SEPC
    3) Account modifier will be taken from movement type 101
    4) Transaction event key will be always BSX for inventory posting. (that is programmed) and also defined in movement type
    5) In account assignment, for combination of above GL account determination as we saw in above hierarchy.
    Hope, it is useful for you,
    Regards,
    K.Rajendran

  • Account determination in SD

    Like in MM, OBYC settings control the account determination in the process besides other things.
    How are the accounts determined in SD modules, where these settings are done?

    Dear,
    Like MM-FI Integration is done solely by the Finance people, they will ask MM counter part only in some cases....FI-SD integration is done by SD people....you (finance) just need to supply the GL account information.....
    Use VKOA to maintain FI-SD integration..
    Regards,
    Chintan Joshi

  • OneDrive Sync Settings with Domain Account Roaming Profile

    This question seems to have been asked in various manners online including here at TechNet but it has never actually been answered that I can find.
    Home domain using Windows Server 2012 R2 Essentials, client is Windows 8.1 Pro 64-bit with Update 1. Logged in as a domain user account with a Roaming Profile and Folder Redirection connected to a Microsoft Account.
    Under PC Settings > OneDrive > Sync Settings, everything is greyed out and disabled. I wasn't too bothered about it previously however with Windows Phone 8.1 out now it means that I cannot use Tab Sync with Internet Explorer 11 on the phone.
    I have a GPO which excludes the following folders from the Roaming Profile to both allow Folder Redirection to function and also to allow the OneDrive app to function: "Downloads;Pictures;My Pictures;Music;My Music;Videos;My Videos;Dropbox;SkyDrive;OneDrive"
    I am using the Primary Computer attribute with a second GPO which limits profile redirection to the users primary computer.
    When logging on to my Primary Computer with the Roaming Profile activated, all of the Sync Settings are disabled but on another machine which is non-primary and therefore my roaming profile does not sync, I can connect my Microsoft Account to the local
    profile generated on this machine and all of the Sync Settings are available, clearly linked to the Roaming element of the profile.
    Is the non-functionality of Sync Settings on domain accounts with Roaming Profiles by design or by virtue of the fact that things are trying to steer away from Roaming Profiles now? I love the Sync features but in that they don't sync everything (3rd party
    Application Settings for example) there is a need for both features to exist in parallel.
    There is a new section in Group Policy to limit the use of the Sync Settings features for Enterprises which wish to prevent users from using these features so I don't understand the reason for it to not function at all for anyone.
    Richard Green | MCSA 2012, MCSE 2003, MCTS Desktop Virtualization, VCP5-DV http://richardjgreen.net

    Hi,
    Was your issue resolved?
    If yes, we will archive this thread temporarily.
    If no, please reply and tell us the current situation.
    If you have any other question, feel free to contact us. We will try our best to help you.
    Karen Hu
    TechNet Community Support

  • Can external users change their language, time zone, and locale settings?

    Hi,
    We’re migrating our hosts from WebEx cloud to our on-prem solution right now (CWMS 1.5.1.323.A).
    We’ve learned that CWMS 1.5 does not provide an online address book where hosts could customize language, time zone, and locale settings for their external attendees.
    Do external users have any chance at all to change their language, time zone and locale settings individually?
    Thank you,
    Helge

    Hi Dejan,
    "external users" are those participants, who do not have an LDAP account in our deployment, since they are not intendet to act as hosts: our stakeholders, partners, customers, clients.
    It looks, as if these people would stick to the systems' default language / time zone / locale.
    We are wondering if there might be a CWMS-component like this:
    https://artcom.webex.com/cmp0307l/webcomponents/widget/preference.do?serviceType=MC&siteurl=artcom&target=Page&backUrl=%2Fmw0307l%2Fmywebex%2Fdefault.do%3Fsiteurl%3Dartcom%26service%3D1
    to allow those "extenal" participants to make their adjustments.
    Thank you,
    Helge

  • Someone please post their HKEY_LOCAL_MACHINE\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository from their registry.

    The title says it all somehow my HKEY_LOCAL_MACHINE\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository got deleted so i need someone to send me theirs (windows 8 only please!) This has
    caused all apps to be disabled so please HELP. Thanks in advance!

    I fixed it myself.
    You have to create a new user account. Now you might say that this is impossible due to the fact that the "PC Settings" app is disabled, but you can use the command prompt an a workaround. 
    1st step: right-click the bottom left of your screen and select "Command Prompt (Admin)"
    2nd step: type "net user /add NEWUSERNAME NEWPASSWORD" without the quotes and hit enter
    3rd step: if you get the success message type "net user NEWUSERNAME /active on
    Now Logoff and go to your new account and apps should work!
    You might to remove your old account from control panel and user accounts.  There is an option to save the files from your old account to the desktop of your new account.  Hope this helps you.

  • Local settings for clients with print drivers installed on server?

    Greetings,
    We have a Windows Server 2012 R2 that has a print driver installed and shared (Xerox 560 ~ Fiery driver).
    Clients map to this driver. I.E. they add printer from network and select it from the list.
    However, because its mapped, they can't edit the driver or save their settings locally (for example: the accounting code is set in the properties of the driver and not in the preferences).
    If they do, as admin, then those changes percolate back up to the sever driver and then to all clients.
    My question is how do I get the clients to manage their own local settings, these settings being found in the properties of the print driver and not in the preferences?
    I need to be able to set things that are set on the properties (and not preferences) of the driver locally on their computer, but I don't want to have to install the driver manually on every client.
    Is their a way to have a local version of the properties page?
    Is this possible?
    Thank you for letting me know.
    Antoine

    may need to set the server as print server...
    http://support.microsoft.com/kb/244284/en-us
    Best,
    Howtodo

  • Local Settings

    Hi,
    How to access a users local settings folder in a domain computer.
    "c:\users\username\Local Settings"
    When ever I try to access this folder is shows a message "Access Denied".
    Is there any way to access this folder.
    Even I'm having administrator rights I'm unable to access.
    I had created administrator access on PC also but still I'm facing the same.
    It's would be helpful if any suggestion received.

    Hi,
    What's your domain user permission? You need add domain user access to local user's profile as below steps:
    1. Logon to the computer using the domain account.
    2. Logout from the domain account.
    3. Logon using a different domain account with administrative rights on the computer.
    4. Browse to the local user's profile at c:\users\<LocalUserName>.
    5. Right-click the profile folder, select Properties and then the Security tab.
    6. Click the Edit->Add button and add the domain user with Full Control permissions. (If this fails with an Access Denied message, then first take ownership of the folder, also using the Security tab but within the Advanced button, and then re-attempt
    the step.)
    7. Click the Advanced button and select the option to replace permissions on all child objects.
    8. Click OK until all permissions have been applied and you are out of the Properties dialog.
    Karen Hu
    TechNet Community Support

  • Edit Locale Settings Link

    I was wondering if anyone knows what API calls I must make to get the 'Edit Locale Settings' Link for a given user which exists on the 'My Account' page.
    Thanks,
    Mike
    P.S. This is for version 5.x

    I can tell you right now, building your own activity space to cut the steps and do what you want is about the only way to go.
    What I would like to know is:
    1) Did I miss a simple way of bypassing the MyAccount page to go straight to the Edit Locale Settings page?
    - you could just hack the page, create a hyperlink and copy the edit local setting page url... that would work.
    - however, you can never get it to redirect back to the current page the user was on, b/c that's now what this edit local setting page does.
    2) Is the activity space the simplest and best way of accomplishing what I need?
    - yes, b/c the locale setting needs to take place and a refresh of content needs to take place. Basically, you still need to mimick what the edit locale page did to get this to change instantaneously for the user as well as do the rest of the actions you described.
    3) If not, would it be possible to create a custom tag to replace the PT:MyAccount tag so that the custom tag goes straight to the locale page?
    - you could do it this way. But why not do #1 instead?
    The short of it... going to the editor page is the simliest and easiest way about it. But the editor page points back to the my account page. If you want to change this behavior, you will have to hack it somehow... which is not possible really unless you build your own activity space.

  • Is there a way from where I can restore my profile from a back-up that I took from a folder (e.g \Local Settings\Application Data\Mozilla\Firefox\Profiles\)

    Before re-installing Firefox 19, I mistakenly took backup of my profile from a folder - C:\Documents and Settings\garan14\Local Settings\Application Data\Mozilla\Firefox\Profiles and not from C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.
    While installing, I selected "Delete the old profiles" option and I don't see any old profile folder under C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.
    However, I have a lot of important data saved under that profile which now has got deleted.
    Is there any way I can still restore the data from old profile? (P.S.: As mentioned above, I have a back-up of profile folder which resides under Local Settings folder)
    I am in a desperate need for the help. Pls reply as soon as possible.

    i have some problem. i delete firefox profile and i cannot use mozilla right now. can you help me ? thank you

  • How to transfer user settings from one account to another (on the same Mac)

    I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
    Is there a way to transfer all of the user settings from one account to another?

    You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
    sudo rm -rf ~play/Library (this deletes Play's Library folder.)
    sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
    sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

  • When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

    When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
    Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
    The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

    http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  • Locale Settings lost on mobile client 7.8.2.14 after creation of BIP report

    Hi All,
    we went live with BI Publisher reports (Siebel 7.8.2.14) at the beginning of June.
    Now some of our users are having trouble with their mobile web client.
    For example our colleagues in Poland have their Windows XP regional settings set to "Polish". It will make Siebel use date format for all date fields (e.g. activity start date) display as YYYY-MM-DD - this works just fine until user is creating a BIP report. After successfull report creation, all locale settings in the mobile client are lost. Instead of YYYY-MM-DD, the dates are displayed in DD.MM.YYYY and creation of new records produces and error. Also, currency and number formats are mixed up.
    I assume it's a bug - anyone hit this before?
    Edited by: Penky on Jun 17, 2011 11:38 AM

    Yes, we finally decided to do so!
    The main reason was that we had a lot of new report change requests and did not want to do the work twice (now in Actuate and then again in BIP). Also we plan our 8.x upgrade for second half of 2011 so this was already some kind of preparation, so we can completely focus on the upgrade afterwards and don't need to hassle around with the reports as well.
    issues we're still facing include "user's are not able to run reports after they change their position" or "List reports can only be run for few records, otherwise the search spec hit's an IO field's length limitation" or "report popup can not be suppressed although there's no useful information in it" (not to forget the one described in this thread) and some others.
    Well ... after 1 1/2 years since I downloaded the first integration QF the BIP journey still does not end - it's like it just started :)

  • JVM bug with Turkish locale settings (windows)

    Hello,
    There is a serious bug in all versions of java virtual machine. When you set your locale settings to Turkish language, you can not install & use database driven java applications (that needs to create a database). For example; you can't install oracle 9i or 10g, ORA-12560 arises in database creation phase; and you can't install Readerware (a book cataloger), it locks-up in database creation phase, too. Ofcourse when you change your language to English or another language the problem goes away.
    I found that the source of the problem is JVM's wrong character mapping. It fails to convert Turkish and English "i" and "I" characters correctly (they're different in Turkish).
    Is there anybody to fix this issue in the next release ?
    Thanks,...

    I logged a bug about Java's Turkish Collator implementation: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4688797.
    I'm not sure if your issue would fall into the same category. It looks like a separate bug to me, although closely related.
    Try logging that bug, or adding this to the bug above.
    HTH,
    <rsa/>

Maybe you are looking for