ALE Workflow Scenario

Hi,
Can somebody tell me how we can handle errors in ALE on Inbound side using workflow?
All the help is appreciated.
Thanks,
Sneha.

HI Sneha,
Please go to transction WE20, pick the Partner / Idoc that you would like to assign the Org. chart to.
Then you should configure "post processing :permitted agent" Tab with the Organizational unit.
Then double click the process code associated with the Idoc Type and click the button next to the Function Module associated with this process code.
Check IDoc Tab and see if Stanard Event INPUTERROROCCURRED is present in the field called start event.
Regards
Saurabh Goel
Edited by: Saurabhgoels on Jul 9, 2009 1:37 PM

Similar Messages

  • SAP Workflow Scenarios

    Dear all,
    We are planning to implement SAP workflow, for the creation of material master and info record of the materials. We are using SAP 4.7 version. Can you give me any idea or hint about how we can configure these cases. Is there any standard workflow on SAP?  If you can also send me documents or web address would be appreciate.
    Thank you for your help
    Melih

    Yes there is and you might not need any help from a workflow professional if you are trying to keep it simple
    Use the following links. They are of great help
    Link: [http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf.]
    Link :[http://www.sapdb.info/sap-workflow-scenarios/]
    link: [http://****************/Tutorials/Workflow/Workflow.htm]

  • Getting Error 26 in ALE IDOC scenario .- EDI Syntax Check Error...

    Hi..
    i am working in ALE Idoc scenario...I am getting Status 3 as well as status 26 in we02 transaction in my custom IDOC scenario for outbound process..
    The error is 'EDI- SYntax Check'..
    How to remove this error..
    Pls help.

    ya, there is only one segment available in IDOC..named i.e zseg_a .
    So , error in postion is avoided..
    How to find syntax error then?

  • Workflow scenarios for FS-CD module

    Hi All
    I am working for FS-CD module for workflow and I am working on FPY1 transaction code for triggering some workitems based on the clients requirements. Could anyone provide me some workflow scenarios for the above said transaction and also for the FS-CD module.
    Thanks
    Ashok

    Hi Ashok,
    Please go to transaction code SWDM to find all the standard SAP workflows for any application component.
    There you can specify the module as FS-CD.
    Thanks & Regards,
    Deb

  • Need SD & MM Workflow Scenarios

    Hi experts ,
    I'm studying SD & MM functional, I need to know about real time SD & MM Workflow scenarios, how it works, how it is configured, administrated etc. If u have any screen shot Pdf on SD or MM workflow's please send me the same to my e-mail id [email protected]
    with regards,
    James....
    Valuable answers will be rewarded....

    Hi,
    For MM related workflow scenarios go to this link:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/1d/ea9d9c7aca11d194b70000e82dec10/frameset.htm
    For SD related workflows go to this:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/5d/6cd8b6a1ef11d194d70000e82dec10/frameset.htm
    Hope this helps,
    Sudhi

  • Re: Pre-Configured Workflow Scenarios

    Hi All,
    I came to know through the SAP Documentation that some pre-configured Workflow scenarios are available in especially in IDES environment.
    I'm looking for some pre-configured Workflow scenarios in ECC environment related to Item/Material/Product create. Please let me know where I can find more information on this and how to consume/use these pre-configured Workflow scenarios.
    Thank you
    Surender

    David/Andy:
    Really good points guys. I certainly am not saying Motion should be like AE. I am not starting a thread that is a comparison of the two. Each has it's own workflow, and Andy I think you bring up a really good point. I rarely use clones but they are a powerful tool in the right circumstance. I am curious about more complex design workflows and how some of us push the limits.
    David, I agree with your point about keeping Motion simple. Apple is proficient at keeping their software/hardware simple. Software that serves one purpose, or devices that have only a few buttons. The elegance is what we all like.
    Additionally, to your point Andy, we can do things withOUT precoming in Motion. Just keeping things in layers is good enough really. Like I said, I'm not really an AE user, but I do understand the concepts. I like the idea of a pre-rendered portion of the animation. Just seems to take the processor intensive portions out of creating complex animations. Moreover I think I am just wondering if I could create more complex animations WITH some of the design workflows that AE offers (like pre-rendering).
    At the end of the day I feel like I can do SO much with Motion, and have wiggle room to play around more. I'm definitely excited about a new version of Motion, and to see what sort of new features make it in. Perhaps nodal workflows, perhaps more 3D design tools... we'll see.

  • Example workflow scenario using webflowconnector

    Hi all,,
    I have many queries related to implementation of workflow in UWL.
    I have read online help and blogs
    The part of configuring the UWL in the intial go is well understood
    I wanna implement a sample workflow scenario in UWL
    - for this i need to configure the UWL in my EP portal ,,which i did using workflowconnector
    - But i wanna knw from where the workitems .The table rows(records created) is accumulated ,,eg in tasks..
    Is the data should (sample records /tasks)be populated in the backend itself or from the portal i can create.....
    I dont have any ABAP knowledge to work at the Backend R/3,,how to fill it there
    any other way which is available
    I need sample tasks/records to be filled in the UWL iview under tasks.notifications etc how can i fill?
    I request you to give me sample simple  scenario  with all the steps
    may be between two users (like approver....employee)
    I need it badly at the earliest..help me experts..pts will be rewarded as per norm.
    Thanks
    Swathi

    Ok,,
    i shall try to put in this way,,
    ok taking the scenario of  ESS ..,
    what are the settings u do ,,,with which the manager and employee is identified by the ESS..
    without ESS cant i implement a workflow scenario using webflowconnector in my UWL iview...
    IF i could,,then after configuration i get a blank iview with tabs--tasks/alerts/notifications
    Now ,,hw should a  i put the single task(u can call record in this table)
    for eg
    subject                                      priority  Absencefrom     AbsenceTo
    approve absence of swathi           High     March7             March11
    from wher does the table data come from?
    Wher u mention who is approver ,who is employee?
    Hope it made sense
    Swathi

  • Workflow Scenario Required

    Hi Friends,
       I have been asked to cook up a workflow scenario which should be at the most complicated. Can anyone here suggest me such a scenario?.
    Prompt replies would be rewarded.
    Thanks,
    Saravanan.D

    Hi Pavan,Saumya,
                           Thanks for the replies.
    I have maintained agent assignment u2018general tasku2019 for the task. I have refreshed the organizational environment and synchronized runtime buffer. But still the FM results in error.
    Does the user need administrator settings to update the work item?

  • Workflow scenario

    Here is a workflow scenario
    Two edit stations with multiple internal SATA drives. Each always working on different projects.
    These different projects are reviewed by multiple reviewers.
    The editors never need to exchange primary representations (clips) so each edit station would hold there own clips.
    Reviewers would need to see the thumbnails and proxies of source footage as well as edited sequences from both edit stations.
    So to support this working arrangement I would install FCserver on a computer used only for FCserver. I would locate the Proxy Media Location on a hard drive attached to this computer. Then locate the Production Media Location on one of the media discs of one of the edit stations.
    After install of Fcserver I would then go and setup more devices to the other hard drives of the two edit stations so that the primary representation would stay in place on those drives as each editor ingested there clips.
    A new project would be created on FCserver for each new FCP project. The editors would make a watch automation that would be setup to add the clips metadata to the FCserver catalog from the FCP capture scratch folder for that project. But the primary representation would not move, as they are already located on a Library/Media device. Another watch automation would upload files placed in a folder that holds other information like scripts, stills even Motion project files and SndTrk Pro project files.
    The proxies and thumbnails would be generated from the hard drives attached to the two edit stations and written to the Proxy Media Location attached to the FCserver where the reviewers would have access to them.
    This way there is little network traffic as the larger primary representations don't get moved anywhere until they are archive. Fcserver is the only computer that has access to the edit stations. And the reviewer can see all the relevant files.
    A simple question here is where are the primary representation held, the Media folder or the Library folder.

    Here is a workflow scenario
    Two edit stations with multiple internal SATA drives. Each always working on different projects.
    These different projects are reviewed by multiple reviewers.
    The editors never need to exchange primary representations (clips) so each edit station would hold there own clips.
    Reviewers would need to see the thumbnails and proxies of source footage as well as edited sequences from both edit stations.
    So to support this working arrangement I would install FCserver on a computer used only for FCserver. I would locate the Proxy Media Location on a hard drive attached to this computer. Then locate the Production Media Location on one of the media discs of one of the edit stations.
    After install of Fcserver I would then go and setup more devices to the other hard drives of the two edit stations so that the primary representation would stay in place on those drives as each editor ingested there clips.
    A new project would be created on FCserver for each new FCP project. The editors would make a watch automation that would be setup to add the clips metadata to the FCserver catalog from the FCP capture scratch folder for that project. But the primary representation would not move, as they are already located on a Library/Media device. Another watch automation would upload files placed in a folder that holds other information like scripts, stills even Motion project files and SndTrk Pro project files.
    The proxies and thumbnails would be generated from the hard drives attached to the two edit stations and written to the Proxy Media Location attached to the FCserver where the reviewers would have access to them.
    This way there is little network traffic as the larger primary representations don't get moved anywhere until they are archive. Fcserver is the only computer that has access to the edit stations. And the reviewer can see all the relevant files.
    A simple question here is where are the primary representation held, the Media folder or the Library folder.

  • Workflow scenario help

    Hi experts,
    i have attached a workflow scenario i created.
    i used the flow condition and my purpose is for invoice to be created only if the Delivery has been approved.
    i used the authorisation status and set it to dasapproved.
    CurrentProcess.B1Obj('dataObject7').getAuthorizationStatus().toString()==='dasApproved'
    But it does not do that when i get to delivery it stops
    And the status showing is completing.
    Can anyone help me out on how to edit to achieve my purpose.
    Urgent Help is needed.
    Regards
    Justice

    Hi Justice,
    From your screenshot, there are 2 routes between delivery and invoice. You need to clear it to leave only one.
    Thanks,
    Gordon

  • Materials Management: Workflow Scenarios

    Dear Support,
       We are going to Implement or configure the Workflow Scenario for PR and PO for releasing the document.
    So pls help in this regard by providing any usefull document or link so that we can able to configure the workflow.
    Provide the conceptual document for workflow management in MM.
    Thanks

    Hi,
    One more Doc that you can refer is
    http://help.sap.com/saphelp_47x200/helpdata/en/04/926f8546f311d189470000e829fbbd/frameset.htm
    Very helpful.
    Regards,
    Ninad Kshirsagar

  • ALE Workflow

    We're implementing ALE between our financials server and HR server.
    We would like to set up some sort of monitoring to make sure the IDocs are processed successfully and want to notify users via some sort of Workflow.
    From what I understand, the program RSEIDOCA collects the Idocs based on the status/message type etc.. criteria selected and sends them via SAP Mail to the appropriate people
    And, I need to make sure all the partner profiles have an Agent assigned to them - this would be the person who's notified of errors.
    I'm sure there's a lot left out. Can someone explain ALE workflow? How similar is it to normal workflow used on FI side?
    thanks,
    robert.

    Hi Robert,
    SAP provides std WF for error handling. The link below will give you some useful information to get started. Hope this helps.
    <a href="http://www.asug.com/client_files/Calendar/Upload/ ASUG%20EDI%20IDoc%20Error%20Handling%20Using%20SAP%20Workflow.ppt">IDOC Error Handling using Workflow Presentation</a>
    Cheers
    VJ

  • Workflow scenario's

    Hi,
    I am looking for some documentation of all types of workflow scenarios , well as many documents that i can assemble atleast.
    For example i have a couple of documents which are pdf files..
    Treasury workflow scenarios
    MM   workflow scenarios 
    So if anyone can provide me with a link or the documents for diff types of workflow scenarios for different modules it will be great...
    Thanks in advance

    Hi Raja,
    Thanks for the link... i have checked the SAp help for workflow scenarios..
    I am looking forward to collect some PDF/Word documents on the same..

  • A list of standard workflows scenarios within SD

    okay, i finally am able to understand the concept of workflows. however, i was trying to find a list of standard workflow scenarios that one can use within SD, actual scenarios, not just an example or 2. my client wants to implement workflows but doesn't care where, he wants to implement the standard scenarios wherever they might be used. anyone got a list of these scenarios? thanks a bunch!

    Astromar,
    Check this link, All SAP standard workflows are mentioned here
    [Workflow Scenario|http://www.sapdb.info/sap-workflow-scenarios/]
    Hope this will help.
    Thanks,
    Raja

  • Need help with a CUP workflow scenario

    Dear Experts,
    I'm sure it is not just me encountered this required scenario (or something similar).  I would like some pointers how to transcript it to a CUP workflow:
    Application admin logs a provisioning request.
    Security creates a user account and provisioning the roles on QA.
    Application admin ensures that the user undergoes training on QA.
    Upon passing the training, security replicates the user account and role assignment on PRD.
    The esoteric solution would be one request, two paths, two provisions. Is it somehow possible?
    Client doesn't use CUA.
    The security requirements are higher on PRD, where SoD handling will be required.
    Kind Regards,
    Vit Vesely
    Edited by: Vit Vesely on Apr 29, 2010 3:29 PM

    Hii Vit,
    If you want to have two paths for a single request than only possible solution will be to create role based initiator's.
    Role Based Initiatator's can be created by following Configuration -> Workflow-> Initiator-> create.
    Here Select the attibute as roles.
    For example create two Initiator
    Intiator1 -> having Role1 attribute -> Path1
    Intiator2 -> having Role2 attribute -> Path2
    Now in the request if u select Role 1 & Role 2, than request will follow the parallel path ( path1 & path 2)
    Else it is not possible to have parrallel workflow path for any other attribute.
    In Case you can have provisioning at end of the paths as well as end of the request.
    Kind Regards,
    Srinivasan

Maybe you are looking for