Aleaud idoc in status 56

hi i work in production support and new to idocs this is the problem given to me i have to solve it asap. when i check the idocs in we02 transaction it shows idocs in status 56 with a message ipartner profile inbound not available.
DETAILED DESCRIPTION OF PROBLEM.
inbound ALEAUD idocs that error with status 56.   These clog up & slow down
workflow- as we are getting over 10,000 of these per month.     For example:
when we work on inbound invoices that error, it's slower. (using transaction
SBWP)    I'm NOT saying ALEAUD idocs are related to inbound invoices, just
saying that SBWP gives us access to variety of idocs and it's been running
slower due to large amount of ALEAUD idocs erroring into workflow every day.
Best I can tell- looks like for every PO & PO Change idoc we send to
SupplySync, we get ALEAUD in response a few seconds/or a minute later.
**See examples on attached Word document, for date of 9/27/05.
Also I checked several different dates and the count/total number of:
PO documents sent    VS   the inbound ALEAUD idocs recvd- always matches
within a count of 1 or 2.
Ex: on 9/27/05     PO docs sent = 663       ALEAUD recvd = 664
Would like to have:
A) ALEAUD idoc creation stopped- if not serving a purpose
B) OR?- have them post successfully instead of erroring in workflow
Or- have workflow purged periodically, if can't do A or B above.
Regardless of how this is resolved- need backlog of ALEAUD purged from
workflow.
any kind of help in solving this problem would be great
thanks
noor.

Hi thanks for reply its very helpful if possible could you plz give more details about the oss notes 153205 it had a look at it talks about report RSWWCIDE to delete type c work items i also saw its selection screen
The selection parameters of the report have the following meaning:
id - ID of the work item -> please always restrict here !!!
cd - creation date of the work item
ct - creation time of the work item
commitc - number of the ContainerItems to be deleted for each LUW
del_log - also delete the history of the ContainerItems
disp - only list selected ContainerItems
does this report deletes the idocs does mean on id of work item i have to enter the idoc numbers which i want to delete and then all idocs nos i enter gets deleted is it so? can youplease give more details.
thanks

Similar Messages

Query on IDOC Ack (STATUS) config in XI for a specific partner comm.

Hi Experts,
Is it possible to configure the IDOC Ack (STATUS.SYSTAT01 message) in XI for a specific partner communication? We want to configure our system like ALEAUD but the message type should be STATUS.SYSTAT01 and the acknowledgment should be send to sender system for a specific partner only if XI receives any IDOC like (Orders) from that specific partner. For other partners (same sender system) we donu2019t want this acknowledgment settings and configuration. If possible please provide the configuration filters steps etc. Thanks for your valuable inputs in advance.
Thanks,
Satish
Edited by: Satish Jaiswal on Jan 8, 2009 2:55 AM

Hi Husain,
I have the document you have mentioned. Please note my requirement is to filter the Ack while creating and sending to R/3 based on Partner and Message type. The document provides info only on Message type filter but not parner specific for same sender system!!! Any help appreciated. Also note: BPM and Alert is out of scope.
Looking for some ALE configuration tricks to achieve this.
Thanks
satish
Edited by: Satish Jaiswal on Jan 9, 2009 2:40 AM

ALEAUDIT IDoc cannot find request IDoc in Integration Server

Hi,
i m working with a scenario SAP ECC 7.0 -> IDoc -> PI -> IDoc -> R/3 4.6c
I m sending a purchase order (ORDERS.ORDERS05) from SAP ECC and i want to receive an acknowledgment from R/3. Unfortunately there are only zeros in the field E1ADHDR / E1STATE / DOCNUM, this leads to the error "ALEAUDIT IDoc cannot find request IDoc in Integration Server" on PI.
Does anybody know what to do in the R/3 system to send the original IDoc number in E1STATE / DOCNUM?
XML Source of the ALEAUD received at PI:
<?xml version="1.0" encoding="UTF-8" ?>
<ALEAUD01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DOCNUM>0000000004307392</DOCNUM>
<DOCREL>46C</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>ALEAUD01</IDOCTYP>
<MESTYP>ALEAUD</MESTYP>
<SNDPOR>SAPQV1</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>QV1CLT100</SNDPRN>
<RCVPOR>A000000022</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>QXC100</RCVPRN>
<CREDAT>20090605</CREDAT>
<CRETIM>111523</CRETIM>
<SERIAL>20090605111521</SERIAL>
</EDI_DC40>
<E1ADHDR SEGMENT="1">
<MESTYP>ORDERS</MESTYP>
<MESTYP_LNG>ORDERS</MESTYP_LNG>
<E1STATE SEGMENT="1">
<DOCNUM>0000000000000000</DOCNUM>
<STATUS>53</STATUS>
<STACOD>SAPV1311</STACOD>
<STATXT>&1 &2 wurde gesichert</STATXT>
<STAPA1>Terminauftrag EX</STAPA1>
<STAPA2>2510016042</STAPA2>
<STATYP>I</STATYP>
<STAMQU>SAP</STAMQU>
<STAMID>V1</STAMID>
<STAMNO>311</STAMNO>
<STAPA1_LNG>Terminauftrag EX</STAPA1_LNG>
<STAPA2_LNG>2510016042</STAPA2_LNG>
<E1PRTOB SEGMENT="1">
<DOCNUM>0000000004307353</DOCNUM>
<OBJTYPE>BUS2032</OBJTYPE>
<OBJKEY>2510016042</OBJKEY>
</E1PRTOB>
</E1STATE>
</E1ADHDR>
</IDOC>
</ALEAUD01>
Regards,
Udo

Hi Volker,
yes, that was the right hint
I needed to change the RCVPRT field to LS to force the receiving system to send the ALEAUD with original number at the right place. Strange reaction, but it is SAP software, he, he.
Regards,
Udo

IDOC Ack status back to XI/BPM ?

Hi
i have done File to Idoc scenario, and want to get acknowledgemnents inside XI/BPM.
i hv proivded port,client,message type and selected 'Request acknowledgement' tab and executed report 'IDX_NOALE'. but im not getting any acknowledgement status in moni. please suggest hw could i get Idoc acknowledgements in XI.
1.Do i need to import ALEAUD Idoc into XI ? and Is any configuration required in ID for ALEAUD?
2.Is it possible to map Idoc status back into BPM? if yes, please explain how BPM should design?
3.once Idoc ack status received inside XI, is it possible to send same status to the back end sender system?
appreciate your help..
Regards,
Rajesh

hi
1.Do i need to import ALEAUD Idoc into XI ? and Is any configuration required in ID for ALEAUD?
By default, audit idocs will come and get tagged to the IDoc. If you want to send it to the file system, all configurations must be done for IDoc to file scenario for the audit IDoc.
2.Is it possible to map Idoc status back into BPM? if yes, please explain how BPM should design?
Yes, it can be done. But won't be reqd in ur case.
3.once Idoc ack status received inside XI, is it possible to send same status to the back end sender system?
Yes, Q1
Check this document on handling IDOC acknowledgements.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
rgds,
Arun

Missing ALEAUD idocs

Dear Experts,
For one of our existing interfaces for Delivery Idocs from R3>PI>third party; we have an issue with the ALEAUD messages. This configuration is in place since a long time. Some of the Delivery Idocs are in status 12 in R3 system and they do not have the corresponding ALEAUD Idocs- hence the staus remains 12 and does not get changed to 39. The third party application has been receiving these delivery Idocs; hence I am not sure why we do not have ALEAUD messages getting created for these. I have checked the below:
In R3 WE09 I have searched ALEAUD messages for the Idocs in status 12 with filter: Segment:E1STATE and Field DOCNUM and heValue <Original Delivery Idoc Number>. For the 39 status idocs I do find ALEAUD Idocs corresponding to th original delivery Idoc. But for the Idocs in status 12; as suspected; I do not find ALEAUD messages.
In PI SXI_Monitor; I do not know how to corelate/find the ALEAUD message for a specific Delivery Idoc message. But I checked with approximate timestamp randomly and could not find the ALEAUD message for my delivery. Is there any other way to find if an ALEAUD message is created for an Original message?Checked in Trace and reliable messaging in SOAP header, response header; but no luck. For 1 hr I could find 2000 messages and going through each of them individually is not an option. I do not have time/aprovals to implement content based search on my production box within a short duration to apply any filter to find these messages.
Can you please help and tell me
1. How can I find/correlate ALEAUD messages for an original message in PI?
2. What could be the reason that ALEAUD messages are not getting generated; only for some messages; eventhough the same has been received at the Destination?

My issue was solved.
After further analysis it was found that the ALEAUD messages are created from the response messages sent by the receiving 3rd part system. Eventhough the 3rd party system was receiving all our outgoing messages; they failed to process the acknowledgement or confirmation for some of the messages. Inturn we received no confirmation responses from the third party and hence the ALEAUD messages were not created for the same. After finding this, the same was informed to the thrid party system and they are fixing the message confirmation/acknowldgement processing from their side. So the issue was closed.
I had also raised an OSS message for this where the analyst had asked me to check the below.. Please go through the same for your issue. Maybe it will help you...
"I looked at the example IDoc messages and i found no request message
created by the external system. Please give us the message id that
for the request message id that should create and ALEAUD-IDoc
for IDoc xxxxxx. If this is missing in the system please contact
the administrator of the external system why this request messages
was not created.
I found 126890 messages in the system with system error, possible
one of these messages contain the information for your idocs.
transaction SM58 i found many errors with function module
IDOC_INBOUND_ASYNCHRONOUS, this function module transports IDocs
and these IDocs are possible missing in the receiving system ?
Please check the errors and try to correct them."
Thank you

Multiple ALEAUD Idocs are being generated per original Idoc

We have the following scenario in PI:
ERP (IDOC)> PI (JDBC)> 3rd Party
PI sends ALEAUD idocs back to ERP when the process is successful. Program RBDAPP01 is then ran on a schedule to update the ALEAUD idoc status, which in turn, updates the idoc status of the orignal idoc sent from ERP (03 to 12).
We just upgraded our PI from 7.0 to 7.1. Now, it seems multiple ALEAUD idocs are being created for each ERP outbound idoc. It used to be 1-to-1. From what I can tell, it look like an ALEAUD it created for every receiver. For example, if we sent one idoc and the data goes to 3 receivers, 3 ALEAUD idocs are created. This causes an issue because the first ALEAUD idoc will update the original outbound idoc to status 12, but any other ones will take it from status 12 to status 09. We want it to stay in status 12.
Any ideas why 7.1 would be any different?

This seems to be the standard behavior. I will explain it.
If an idoc comes and message is sent to say three receivers, all the three message should generate the ack unless they are not disabled. And in this case you will find multiple ALEAUD message at sender. In case the receiver adapters are like File, JDBC which do not support application ack, then ALEAUD won't be sent and you will receiver "Applicaition Ack Not Supported". With this error, if multiple ack are seen in sender then I guess they won't actually perform any update.
Regards,
Prateek

Error in ALEAUD Idoc

Hi All,
When i send the MATMAS Idoc from ECC to XI, it is giving success and iam expecting the ALEAUD back to SAP.
If the ALEAUD idoc is posted successfully to ECC means ,the outbound idoc status will be turned into 39 status.Else it is in 03 only
when i check the status of ALEAUD, few of the Status is in 51 and saying the error as
Error when locking the audit statistics for DR2CLNT200 DWMS ZATEMATMAS
Please let me know the solution for this.
Regards

HI Vamshi,
This is a lock issue. When one idoc is trying to update a table and at the same time another idocs come to update it, then it will be locked.
In your case i believe the first ALEAUD got updated with success but when the second ALEAUD is upadting ECC, the third might have also reached thus locking it. If you can add some time delay in getting the response back then it might help with the lock issue.
Hope this helps.
Thanks,
Sudhir

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

How to cancel an idoc in status 64

How to cancel an idoc in status 64

Hi Manju,
If you have table updation access then
Go to SE16 --> Table EDIDC --> Give your "IDoc number" --> change the status from 64 to "73 IDoc archived".
Or you can ask to your ABAPer to do that.
Hope it helps,
Regards,
MT

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

SAP IDOC shows status 03, but no file is written

We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
Can you some please share your insights on how to resolve this issue?
Thanks in advance
Satish

RFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model in sender system.
Partner profiles maintained in both the systems, soure Outbound properties
Target Inbound properties.
if you have two clients in system it will be easily you can check.

5 IDOC with status 29 Error in ALE service

hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
raju

Hi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards.

Problem with ALEAUD IDOC

Helo everybody
We have this scenario:
JDBC>PI-(IDOC)---->SAP
SAP(ALEAUD IDOC)>PI----->JDBC
But we cant recive the Aleaud Idoc in PI. We get this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Anybodoy knows what´s happenning and how to solve it????
Thanks a lot

Christian Abad Chico wrote:
> Helo everybody
>
> We have this scenario:
> JDBC>PI-(IDOC)---->SAP
> SAP(ALEAUD IDOC)>PI----->JDBC
>
> But we cant recive the Aleaud Idoc in PI. We get this error:
>
> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
> - 
> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
> <SAP:Category>XIAdapter</SAP:Category>
> <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
> <SAP:P1 />
> <SAP:P2 />
> <SAP:P3 />
> <SAP:P4 />
> <SAP:AdditionalText />
> <SAP:ApplicationFaultMessage namespace="" />
> <SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server</SAP:Stack>
This IDoc is received by PI as acknowledgement. Hence it tries to correlate this to the request IDoc and is not able to find the request IDoc. The correlation used is the idoc number DOCNUM under E1STATE
So, If you are manually generating the ALEAUD Idoc through we19 make sure that you fill in proper Idoc number in the above field to get rid of this error.
> <SAP:Retry>N</SAP:Retry>
> </SAP:Error>
>
> Anybodoy knows what´s happenning and how to solve it????
>
> Thanks a lot
From the description of your scenario, You need to get the ALEAUD message as a request message as against acknowledgement. For that you need to use the program IDX_ALEREQUEST program in PI as suggested by others in your other threads. If this issue is already solved, Please close the same.
Best Regards,
Nageshwar

Idoc- can we sent already sended idoc if status is showing error message

hi
Idoc- can we sent already sended idoc if status is showing error message
without making any changes.
Thanks in advance.

Hi raja,
IN BD87.
give the idoc number,its status,messagetype and partner system and resend it.
Regards,
nagaraj

Search idocs using status message EDIDS

Hi,
Is it possible to find out the idocs using status message?
For example, I need the idocs example in test system which has error message "Vendor & is not defined in company code &"
How to search idocs using error message?
Thanks for your help.
Regards,
Yogita

Hello Yogita
You have to select within table EDIDS directly:
Example:
STATXT = Item &: Only &2 &3 from material &4 are available
STAPA1 = syst-MSGV1
STAPA2 = syst-MSGV2
STAPA3 = syst-MSGV3
STAPA4 = syst-MSGV4
STATYP = syst-msgty (E, W, I, S, A)
STAMID = syst-msgid
STAMNO = syst-msgno
Regards
Uwe

Aleaud idoc in status 56

Similar Messages

Maybe you are looking for