ALEAUD in IDOC to File Scenario

Hi,
I have a IDOC to file scenario in which im sending the PAYEXT IDOC from SAP to a bank as the IDOC-XML.
ie the user will create a payment in the SAP system , this shoud trigger an IDOC to XI. XI puts the IDOC-XML sturcture into a FTP folder path from which the bank will pick it up. Now the bank has to send an acknowledgement(asynchronously) that the payment was processed. And this response should be captured and returned to the user.
can we use ALEAUD as the acknowledgement or does using ALEAUD make no sense here?

Hi,
Assuming that the bank will send you a file to the FTP server you can simply pick up this file and mapi it to the Systat IDoc. I would assumt that the IDoc status's would not be in the file so you would have to do some value mapping or other logic to determine the IDoc status codes that you want.
The IDoc is very simple with few fields so the mapping should not be a problem.
Please note you do not use BPM for this scenario. In essence this would be a new flow of File --> PI --> IDoc
Import the STATUS.SYSTAT IDoc into the Design and play from there, you can make a POC now and test the functionality which would probably be best for you at this point.
Let me know if you need more details
Edited by: Alexander Ong on Jul 14, 2009 4:57 PM

Similar Messages

  • Idoc-xi-file scenario.  how to display file in html format

    I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
    In idoc-xi-file scenario.......  how to display file in html format ??
    Thanks in advance
    Kumar

    Hi Vijayakumar,
    Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
    Regards
    Kumar

  • In idoc to file scenario, if XI system is down where do idocs pile up?

    In idoc to file scenario, if XI system is down where do idocs pile up (get stuck)
    what tcode can I use to reprocess it?

    Sender System ,Check  BD87 .. you will see alll the IDOCs in Yellow state ..
    You can reprocess all the IDOCs in go from there .. if only they are in yellow state ...
    regards
    PS

  • FIle Content Conversion Problem in IDOC-XI-File Scenario

    Dear All,
    I am doing IDOC-XI-FILE scenario.
    I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
    Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
    The output xml version generated by Reciever file adapter is as below :
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
    - <SITE_DATA>
    <STORE_CODE>N002</STORE_CODE>
    <TITLE_MEDI>Company</TITLE_MEDI>
    <STORE_NAME>Mount Road</STORE_NAME>
    <STREET>Chennai</STREET>
    <COUNTRY>IN</COUNTRY>
    <SALES_TAX_NO>12345678910</SALES_TAX_NO>
    </SITE_DATA>
    </ns0:MT_SITE_MASTER>
    Plz provide me the code I have to write in the file content conversion .
    Thanks in advance
    Regards
    Prabhat

    If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
    My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier.  Then use the Suppress Logic for the Current Date.
    So it will look like this-
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
    - <SITE_DATA>
    <STORE_CODE>N002</STORE_CODE>
    <TITLE_MEDI>Company</TITLE_MEDI>
    <STORE_NAME>Mount Road</STORE_NAME>
    <STREET>Chennai</STREET>
    <COUNTRY>IN</COUNTRY>
    <SALES_TAX_NO>12345678910</SALES_TAX_NO>
    </SITE_DATA>
    <CURR_DATE>
       <CURRENT_DATE>20051105</CURRENT_DATE>
    </CURR_DATE>
    </ns0:MT_SITE_MASTER>
    So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
    CURR_DATE.fieldFixedLengths - 0
    CURR_DATE.fixedLengthTooShortHanling - Cut
    And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
    Hope this solves ur problem.
    Regards,
    Moorthy

  • Error/Doubts in Idoc-XI-File scenario

    Dear All,
    I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
    For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
    Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
    Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
    In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
    Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
    Can anybody guide if I have followed the correct steps & where I am doing the error.
    Warm Regards,
    N.Jain

    Hi ,
    Plese refer the following blogs ,
    IDoc to File
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    You have to do all this settings mentioned in the docuemnt:
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
    Also can you check this weblogs on the same:
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    Thanks ,
    Suvarna
    Award pts if  it helps .

  • Integration server as logical system in IDoc to file scenario

    Hi,
    Will we configure integration server as logical system in IDoc to file scenario or the RFC destination related to the port will be suffice?
    For which logical system will the outbound partner profile configured?
    Regards,
    Gajendra.

    Hello,
    I feel that the RFC destination linked to the port is the key here.
    Because the scenario (IDoc to File) works in both the cases:
    Case 1: Used the logical system as Integration server
    Case 2: Used the logical system related to the file (third party) in the SLD.
    In both the above cases the RFC destination points to the integration server.
    Is this the case that in the XI scenarios (where IDoc are sent) the logical system name in the partner profile is just dummy and has not much significance??
    It is the port that matters and once the Idoc reaches XI the routing takes place based on the configuration in ID.
    Thanks.
    Regards,
    Gajendra.

  • How to suppress the Acknowledgement  Error in IDOC to File scenario?

    Hi -
    I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
    I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
    i tried that option but i still get the 'Acknowledgement not possible' error.
    Is there any other way to suppress this error?
    Thanks,
    Tirumal

    Hi Tirumal,
    Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
    This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
    Also go through these documents for any further help:
    http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    Regards,
    abhy

  • IDOC to file scenario

    Hi Experts,
    In IDOC to file scenario i did in this way.
    1)created logical system.
    2)Using SALE tcode I assign logical system to client ,created RFC destination,Port and Partner's profile.
    It is showing all the thing correct.
    3) In XI system , I configured using IDX1 and IDX2.
    Then I created the material and checked the status which is green in we05.
    But in tcode IDX5, the material is not coming.
    Here I am confused that why data is not coming to XI system.
    can anyone help me?
    Thanks
    Rabi

    Hi,
    The Following are the Possible checks
    1) Check in R/3 side SMQ1 & SMQ2
    2) Check in R/3 side SM58
       In R/3 system, Goto SM58 tcode and see if the IDOC have stuck up in Queue.
       If the entry is available then select it and press F6, to push it manually.
        This happens normally if IDOC stuck up in queues.
    3) Check in PI SMQ2 and IDX5
    regards,
    ganesh.

  • PI 7.1 scenario -- File to File , File to IDOC  and IDoc to File Scenario

    Hi All,
    *I have PI 7.0 . I have in that File to File , File to IDOC  and IDoc to File Scenarios*
    File to File -- This scenario is working fine.
    File to IDOC   --  Setting done in PI 7.0 like SM59,  IDXI, IDX2  and in R/3 like SALE (logical system)---  This scenario is working fine.
    IDoc to File  --  Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
    Now I need to move to PI 7.1  -- for File to File , File to IDOC  and IDoc to File Scenarios.
    Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
    If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
    Regards

    >
    Rickkk wrote:
    > Hi,
    >
    > Idoc metadeta is updated through idx2?
    >
    > Regards
    If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
    You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

  • Why we dont need sender agreement and comm channel in IDOC to file scenario

    Hi,
    there are 2 queries:
    first query :
    Scenario is "Idoc to file transfer"
    why we dont need sender agreement and communication channel for IDOC to file ,while we do need
    both of these for "File to RFC "
    Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
    Then why For "IDOC to file" we dont need that.
    Second query:
    Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
    between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
    and getting data from RFC back to File2.
    Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
    Regards,
    Mayank
    Edited by: mayank verdia on Jan 13, 2009 11:49 AM
    Edited by: mayank verdia on Jan 13, 2009 11:50 AM

    Dear All,
    For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
    For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
    I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
    Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

  • Error in IDoc to file scenario

    Hi Experts,
    I am working on IDoc to File scenario.IDoc is sccessfully reached XI.In SXMB_MONI it is showing error in request mapping.Error is
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
      <SAP:P1>max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>&quot;SYSTEM FAILURE&quot; during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' No memory availab</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Please suggest me in this issue.
    Thanks,
    Bhuvan.

    Check this link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/bb/ad1c3d2b058c4ce10000000a114084/
    You might want to refer to the SAP NOTE: 316877
    Regards,
    Ravi

  • Problem in idoc to file scenario

    hi
    while creating the idoc to file scenario i am facing few problems.
    1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
    2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
    3) i am using my ecc6 training server as my sender and using my XI server as receiver.
    4) i am sending idoc from ecc6 and converting it  to file in XI server and saving it in XI server itself(my receiver in this case).
    my error:
    i send my idoc from we19 transaction, and i see a error message stating
    that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
    my doubts.
    1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
    2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
    3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
    kindly help me with this issue.
    regards
    manoharan

    >
    manoj murugesan wrote:
    > 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
    >
    > 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
    >
    > 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
    >
    >
    > kindly help me with this issue.
    >
    >
    > regards
    > manoharan
    and to 1 & 2 ref. below,
    Configuration steps required for posting idoc's(XI) -
    /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
    ALE configuration for pushing idocs from SAP to XI -
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

  • Issues in IDOC to File scenario using bussiness service

    Hi Team
    I found a blog which explains about the IDOC to FILE scenario by using bussinss services. I followed the steps and finally i am getting a error message while posting an idoc in we19 (ie IDOC 09878 was saved but cannot or should not be sent).  The setting which have done on SAP side are as below
    SAP SIDE CONFIGURATIONS
    1. Created RFC destination : RFC_XI_SYSTEM
    2. Created port : PORT_TEST
    3. created logical system: IDOC2FILE
    4. created partner profiles: IDOC2FILE
    XI side configurations
    1. Created RFC destination: RFC_SAP_SYSTEM
    2. Created port : by using IDX1 t-code
    DOUBT: here it is asking for PORT, CLIENT,Description and RFC destination, please let me know what values i need to put here, please find the SAP and XI system details below and suggest accordingly.
    3. metadata: by using idx2.
    DOUBT: here it is asking for IDOC type and source port,  i can give the idoc name but i am not getting what i need to give to source prort field, please check and let me know,  please find the SAP and XI system details below and suggest accordingly.
    SAP system details
    Client: 800
    User name: sapuser
    system id: DEV
    system number:10
    XI system details
    Client:100
    username:xisuper
    system id: SXI
    system numebr: 00
    I request you to please check and help to successfullly completion of this scenario. I request you to please provide me the screen shots of the pre-requiste settings and suggest me the steps to debug the scenario.
    Thanks in advance.
    Raju

    To complete your scenario successfully with better understanding of Idoc adapter
    read http://help.sap.com/saphelp_nw70/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm.
    for troubleshooting refer http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm

  • Alerts when the acknowledgement fails in IDOC to File Scenario

    Hi All,
    could you let me know how to handle Alerts for Idoc to File scenario.
    My Scenario uses BPM as well.
    Thanks,
    Srini

    Dear All,
    For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
    For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
    I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
    Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

  • Issues in SAP(Idoc)-XI-File scenario

    Dear All,
    I am working on SAP(Idoc)-XI-File scenario. But in the Receiver agreement i am not able to see the idoc in order to specify some conditions there. 
    Please suggest if I have to do any settings in order to specify some conditions in the idoc.
    Warm Regards,
    N.Jain

    Hi nishu jain  ,
    U can specify the conditions in Reciever Determination.
    1.Go to Scenarios
    2.Choose your business scenario
    3.Click Service without party
    4.Double click Reciever Determination
    5.U wil get  screen in which there is a option called Configured Recievers.
    6.Click there.then u wil get the screen with
         Left Operand  Op Right Operand
    7.There u can specify the condition.
    Reward points if u find this useful.......
    Regards,
    gyanaraj

Maybe you are looking for