ALEAUD01 IDOC problem with Senderpartner Number

Hi,
I have scenario like R3 -XI-File NFS.so we have created a third party Receiving system(TEST_XYZ)as a business system maintain in SLD.
when the IDOCs sent from sender R3 system acknowledgments been sent back to R3 system from XI,but XI system generate acknowledgment populating wrong sender SNDPRN(TEST_XYZ 's Logical system maintained(TESTPRN) in SLD for Business system TEST_XYZ) and the ALEAUD01 IDOCS are failing in R3 system as there is no partner profile set up in R3.I changes the Logical System name for Thirdparty Business System in SLD,but still XI ack populating with wrong SNDPRN.
R3 sending IDOCs with a RCVPRN like TEST123 and type LS to XI,if XI can send back ALEAUD01 with SNDPRN same as RCVPRN TEST123 ,then all ALEAUD01 will be posted correctly.
I have tried putting receiving Business system (TEST_XYZ) Adapter specific identifiers Logical system name as TEST123,but no luck.
how can resolve the issue please?
thank you,
Sathish
Edited by: Sathish on Feb 3, 2009 2:57 PM

Hello Sathish,
I was having two scenarios and you are right that was R/3 -XI-R/3 .
I tried for idoc to file scenario with configuring RCVPRN as logical system of File. When i tested the scenario it worked as expected i mean ack with SNDPRN as Logical system of File and RCVPRN as logical system of R/3.
In your case after changing the logical system of file in SLD. In ID clear SLD Cache and try to sync logical system in the adapter specific properties and you will be configured log in that .
Rerun the scenario now you will see the ALEAUD01 with expected control record
HTH
Rajesh

Similar Messages

Hello, i have a problem with this number code 213:19, please help me!

Hello, i have a problem with this number code 213:19, please help me!

dan
What version of Premiere Elements and on what computer operating system is it running?
If you are using Premiere Elements 13, have you updated it to 13.1 yet? If not, please do so using an opened project's Help Menu/Updates.
What type of user account are you using....local administrator or domain type?
Please review the following Adobe document on the 213.19 issue. Have you read that already?
Error 213:19 | Problem has occurred with the licensing of this product
ATR

Cannot contact the Adobe Service, I have a problem with the number.

Hi,
I would like to have more information in regard of the Adobe DC. My intent is to buy the product and use it in my office, we are a small company (4 PC).
If I'm not wrong I should take the Standard Plan for Business, but I cannot arrange any payment request for information because I have a problem with the number I am supposed to call.
Is there any other way to know if this software suit fine for me and my company, and most of all how much it will cost.
Thank you for your consideration.
Have a nice day!
I look forward to hearing from you.
Best,
Augusto

Hi Avgvstvs67,
Please refer this link : https://acrobat.adobe.com/in/en/pricing/business-pricing.html
Regards,
Rahul

Problem with user number

Goodmorning, I have a problem with user number of my smartphone Blackberry Curve 8900: when I call a numer of my adress book, on the right, appears a user number, that I don't know. Why dont'appears mine? I don't have buy this smartphone personally, but I had it (used) through the smartphone's owner...I think that the user number that appears on my display is his. How I can do to remove it?
Waiting for an answer, thank you.

Hello scricciolina90
Welcome To Support Forums
On or Curve 8900 from the Home screen > click Options > Click Advanced Settings > SIM Card > Highlight the phone number > Press the Menu key and click Edit SIM Phone Number > Check that field or Enter you Mobile number in that field .
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Problem with Serial Number from MSi ATi HD4870 :/

Hi all,
I have problem with my HD4870. I lost the serial number (the small paper on back of card) from card. Have I any chance to get it back? I can take a photo and post it here some S/N and P/N from card, if it helpfull... I lose my warranty, if I can't get it back
So, any choice to get it?
Thanks for answers,
Mirek.

Thanks for answers in first,
I have problem with card - I had it two days in Crossfire with another HD4870 but accidentally when I played Metro 2033 I got some stripes on monitor (purple, blue) and then PC stop working. I had to restart PC and when the system booted to Windows, until 10 second I got the same stripes on monitor. Then my PC didn't boot.
On my card I have 4 diodes - when I turned on pc, the diodes blinks but now blinks only TREE of FOUR diods.. So I took the card to shop when I bought it, but the shop-assistant told me, that I need this little paper on Card.. :/
I'm from Czech Republic, so I have a little problem with directly contact to HQ of MSI
So I have to go again to the shop and tell them, that Serial Numbers what they need are in card?

Problem with serial number and installing PSE 12

I purchased Adobe PSE 12 yesterday and the purchase went through. But I never received a confoirmation email from Adobe. Now, when I try to enter the serial number to install, I'm told there is a problem with the serial number and I must contact customer support. Can't get through to customer support though. What should I do? I desperately need to get this program installed. Thanks.

Hi 2Summers,
Please provide me the serial number and I will check it for you.
Send me aprivate message. Do not post it here.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Problem with serial Number in Inspection Lot

Dear All,
I have a typical problem that material is there in quality inspection lot and serial numbers are aslo assigned during 101 mvt. but when I am posting it to unrestricted stock system is not determine serial number and giving an error
*Stock data of serial number XXXXXX not suitable for movement
Message no. IO231*
All configuration setting are also OK as this problem comes for the first time and previously we were able to clear inspection lots of that material easily with serial number.
Any Idea to rectify that problem?
Thanks
Edited by: Ashu on Aug 9, 2010 5:54 PM

Hello,
Check with your serializing Procedure check the assignment in Work scheduling View for this material also check in Quality view
for inspection type 4 for GR of Production order.
Regards,
JayaVimal

Problem with random number generation

hey forum, i wonder if anyone can help me out with a small problem with my university coursework (yep its homework!!!)
heres my problem, i am writing one of them 8 puzzle problems (the one based around sam lloyds 15 puzzler), i can successfully generate one random sequence of numbers with no duplicates, but whenever i call the random method again it keeps producing the same results
heres the code
in my main class file
if(e.getSource() == randomButton) {
      new RandomPuzzle();
      System.out.println(random.randState);
      //startStateString = new RandomPuzzle();
}heres my number generator class file
import java.util.Random;
import java.io.*;
public class RandomPuzzle
     /** Base Random number generator */
    Random rn = new Random();
    /** Puzzle holder */
    byte b[];
    long number = 0;
    String randState = "";
    /** Default constructor */
    public RandomPuzzle() {
        rn.setSeed(number);
        b = new byte[9];
        randState = randomString();
    /** Provide range for generation */
    public int rand(int lo, int hi) {
        int n = hi - lo + 1;
        int i = rn.nextInt() % n;
        if (i < 0)
        i = -i;
        return lo + i;
    /** Set size for array */
    public int rand( int hi){
        int n = hi;
            return n;
    /** Check for duplicate values within the same configuration */
    boolean valueExists( byte value ) {
        int i = b.length;
        boolean exists = false;
        for( int j = 0; j < i; j++ ){
            if( b[j] == value )
                exists = true;
        return exists;
    /** returns the actual string */
    public String randomString(int lo, int hi) {
        int n = rand( 9 );
        //boolean valueEntered = false;
        for (int i = 0; i < 9; i++) {
            boolean valueEntered = false;
            byte temp = (byte)rand('0', '8');
            while( valueEntered == false ) {
                if( !valueExists( temp ) ) {
                     b[i] = temp;
                     valueEntered = true;
                else
                    temp = (byte)rand('0', '8');
        return new String(b, 0);
    /** calls above function */
    public String randomString() {
        return randomString(0, 8);
}i've tried for hours to work this out, but i am stumped. if anyone can point me in the right direction, maybe point out the problem code and give one or two tips i would be forever in your debt
thanx in advance
korbitz

thanx for the help paulcw, but when i removed the seed code it done the same
but i added this to my main class and now it works fine
if(e.getSource() == randomButton) {
               RandomPuzzle temp = new RandomPuzzle();
               System.out.println(temp.randState);
               //startStateString = new RandomPuzzle();
          }thanx again for your help

Problems with the number three on the keypad

iphone 4: When I dial a phone number, all of the digits on the keypad work correctly. When prompted to enter an account number or PIN, or choose an option from a menu after I get connected to my party, the number three key often does not register. I thought I might have dropped the phone or something so I tried my wife's iphone 4 and it has the same problem as mine with the number three. Is there a "fix" or workaround for this and am I the only one with this problem?

But this is all me, and I do A LOT of scrolling back and forth to cross check facts and so on. Having to constantly switch between files would be a huge pain.
I guess it's a matter of work styles, but I'd much prefer to switch around among a batch of open chapters with a simple key combination, as opposed to scrolling back and forth through pages in linear fashion.
How would ID handle a document of this complexity?
With the limited information you've offered, I'd say I have experience with similar documents, (product catalogs/pricelists), that ID handled just fine, and other cases in which seemingly simple files choked it. I can say the same of Quark. No one can answer your question definitively; there are too many variables. Chances are it's not (only) the size and complexity of your document in itself that are causing your problems. There can be any number of hardware or OS issues contributing, to name a couple.

Packing instructions - problem with external number range

Hi Gurus:
I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
I appreciate your valuable input
Tamas

For further records:
we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

Problem with Skype Number

Is there any people in skype to help out this issue, give some response please its very important, i gave all my coleogues my skype number so i cant able to contact them..i wish you will sort out this problem as soon as possible...
thank you
Subject/title amended from "fault," for clarity.
thasriq

Hi, Thasriq, and welcome to the Community,
Please check the information presented in this FAQ article to see if this does not resolve problems with your SKype Number not receiving calls:
https://support.skype.com/en/faq/FA10615/why-am-i-not-receiving-calls-to-my-skype-number
If these steps do not work, please contact Skype Customer Service directly for further assistance in testing the number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Problem with the number format in the graph axis with Report Generation Toolkit.

Hi!
I'm trying to use the Report Generation Toolkit to plot some graphs in Excel.
My first problem is that I don't know how to configure the number format in the Excel Set Graph Font.vi so that my numbers are correctly displayed in the graph's axis. The only given option is general (0,0) but this is not enough for me, my numbers can get really small so I need engineering notation or fraccional format.
Second: I also insert a table with the graph source data, but the numbers are not correctly displayed either: for example:
0,75 is shown as:
0,750000
but 1,25 is shown as:
1!250!000
My guess is I am making to much or wrong string to number conversions or Excel is getting it wrong but I can't find my way...
Can someone help me with this?
Thanks,
Isabel

Here is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi ‏96 KB

Problem with serial number while reinstalling CS6 Design Standard on new computer

I have a new Computer (Windows 8) and am now trying to install my Adobe Design Standard CS 6.
I bought that suite and installed it sucessfully on my old computer in Jan 13 as an Upgrade to Adobe Design Standard CS 5.5 (which was also an Upgrade Version from another Adobe Product).
When beginning the installation on my new computer today , I was asked for my serial number. The serial number for my Adobe Design Standard CS6 was accepted, however, that is only an Upgrade Version.
As the Product I'm upgrading from I chose the option Adobe Design Standard CS5.5 and gave my serial number for that product.
Then I got the message: 'Diese Seriennummer gilt nicht für ein kompatibles Produkt. Geben Sie eine andere Seriennummer ein', which means translated: This serial number is not valid for a compatible Produkt. Give another serial number.
I don't know why my Adobe Design Standard CS6 should not be compatible to my Adobe Design Standard CS 5.5 and I don't have another serial number.
Could you help me with this problem?
Regards
Eva

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Problem with serial number Lr2 to Lr4 upgrading

Welcome. I have a problem in LR 4 I use Lr2 upgrade to L4. From time to time my PC lost the serial number of the program. I have to enter the new LR2 and LR4 number losing all presets. After reinstalling Windows 7 is still the problem exists. Is it possible to send me a new LR4 for installations already without error?

Your presets should not be lost even if you have to re-license LR4 with 2 serial numbers. Something else must be resetting things on your computer. Are you using System Restore?
Make a backup of your critical LR files elsewhere on your computer and if they are reset or lost, restore from that backup.
Your serial number Is stored in this file:
C:\ProgramData\Adobe\Lightroom\Lightroom 4.0 Registration.lrreg
Your presets are stored, here or with your catalog:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\[preset or template folder]\[preset or template filename.lrtemplate]
Your preferences are stored here:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 4 Preferences.agprefs
You can download LR 4.4.1 from here:
http://www.adobe.com/support/downloads/product.jsp?product=113 <http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows> &platform=Windows

Problem with Serial Number when I tried to do the UD

Dear Colleagues,
I need your help with the issue below:
I have one material that Serial Number profile was not configured. The GR was done for 3 pcs, these material is to do the UD, but before to completed the process (UD) the material was changed and the Serial Number profile was set.
More 27 pcs were receiced, and for these pcs the Serial Number as created in the Material Document.
The user was not able to do the UD, and I requested him to use the t-code MBST to cancel the Material documents, but is not able to do this process for the Material Document that doesn't have the Serial Number (This is the fisrt Material document regarding that 3 pcs).
Now I have these 3 pcs for to make the UD and I'm not able, because I have an Error inform that I need to have the Serial Number, and I'm not able to cancel the Material document as well.
I want to know if we have some SAP Note, or one procedure that I can use to resolve this problem.
Many Thanks.
Orlando

At least you are entitled to the prize for having the longest topic description on the Support Forum.
Leo

ALEAUD01 IDOC problem with Senderpartner Number

Similar Messages

Maybe you are looking for